PS CS6 ejects the dvd (mac) before reading.

Similar Questions

• Reader SuperDrive plays movies, CDs, but ejects the DVD-R

  I am trying to burn a DVD - a first in a long time.  My circa 2010 Mac Pro with Superdrive is eject the DVD-R discs, but fortunately plays DVD movies and CDs.  When you insert a DVD-R, the drive through 2 cycles of what seems to be the reading of the disc, then automatically opens the Superdrive drive door.  No idea what this problem is?

  Thank you.

  Try a cleaning disc. different lasers are used for reading and writing CD and DVD, and so perhaps only a dirty laser lens.

  Cold otherwise be hardware problem with the drive.

  Have you tried a different brand of DVD?

• cannot eject the dvd from studio 1737

  cannot eject the dvd from studio 1737 laptop

  Hello

  If they don't help then check with the manufacturer of system and/or car manufacturer
  Support, their documentation online and drivers and ask questions in the forums (if any) on
  known issues.

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can
  wand, a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  -----------------------------------------------------------------------

  You can probably find more info here with a CD/DVD-related hardware problems.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Copy the contents of the drive in a desktop folder and install from this directory.

• eject the DVD from the laptop

  How can I remove a dvd from my laptop when the eject eject button had this problem before the habit can't remember how!

  How can I remove a dvd from my laptop when the eject eject button had this problem before the habit can't remember how!

  What eject button used?
  There is a law on the CD/DVD tray. Press this one manually and the status bar is supposed to open.
  It is a when you click Open the DVD/CD drive (mine is drive E), and there is an eject button to the toolbar.

  t-4-2

• Force ejecting the DVD of the external drive

  I need to force eject a DVD into my external drive attached to a MACBook Pro.  I'd appreciate any help - I know there is a way to do this!

  Launch the Terminal.

  Applications > utilities > Terminal

  Type in drutil eject external  internal

  Press ENTER.

• Remove the last comma before reading csv files

  Hello

  I'm working on a VI that reads a lot of files csv (created by an application) using the built-in "worksheet File.vi reading" before combining in a report by using the excel report generation tool. 'All lines' are read in the csv file by using the worksheet File.vi reading.

  There are cases of csv files, where there an unwanted comma to the end of the line and an extra cell (with no data) appears in the final report. I was wondering if there is an easy way to remove it (rather than passing through each line and get rid of it).

  Thank you!

  You will need to go through each line, look at the last element and delete it if it is an empty string.  But a loop, it's easy:

  

  Read the spreadsheet, get 2D array of strings.  For each line, download the last element.  Test if she is a Virgin.  If so, remove it from the table.  If this is not the case, switch the blank table.

• I can't eject the dvd from the drive

  Windows media DVD player

  When I try to eject my dvd it want to release. What can I do to get out the dvd

  There should be a small hole near the drawer in which you can insert an unbent paperclip.  This should force the drawer open.

• eject the dvd

  I inserted the original disc to reinstal lmy printer software. I feel stupid, but I can't find anywhere to eject the disc

  Thanks for trying it. but your advice is not for my 600 touchsmart computer.  I managed to finally solve the problem on mine

• Remove the key only to eject the dvd, they will not delete

  I have a Samsung 700 PC series laptop with a Matshita UJ8A7AS drive. I have informed keyboard option, it has Win7 home premium 64 bit.  The DELETE key was 2 options, DELETE the key worked to remove items highlighted or selected. In the text, he would remove characters to the right of the Courvite. By pressing keys Fn and delete entire would eject the disc of the power optical drive slot. NOW it will only eject function, as if using the Fn + delete key combination.  The Fn key does not stick. This works for all the other key combos.  I have all the updates. I lived integrated help and support, convenience stores, several research and MS Knowledge Base online. I have not knowingly changed anything. Any suggestions?

  This isn't something that Windows can help you to, the implementation of functions Fn on the abstract material level.  Windows operating system doesn't 'see' this key (indeed this Fn button is not to dismiss the screensaver).

  Most likely, there is some type of "Fn Lock" that has been activated.  But you really want to contact Samsung directly to find out how to disable or to work with her.  The controls/options so that it will apply only to Samsung and is not part of Windows.

• Cannot eject the DVD of tour

  I have a DVD in the tower that I can't eject. I push the button on the tower and nothing happens.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• NEC player treats the DVD - RW in read mode only - will not erase or allow you to replace

  Brief description: I burn TV for DVD - RW disks shows and having seen on TV, re - use the drive for new shows. After several reuses (5-10), the disc cannot be erased, and when I try to delete files on the disk, Explorer tells me the disk is read-only and begins to access D drive problems.

  Detailed description:

  Computer: Dell Inspiron 9300

  System: MS XP Media Edition

  Burning software: ImgBurn and BurnAware

  Trying to delete it:

  (1) ImgBurn trying to erase before burning new files - I get a ' Oh, no. ' and a failure on the mark of 43%.  The analysis is as follows:

  _NEC DVD +-RW ND-6500 203E A (ATA)
  Current profile: DVD - RW

  Disc information:
  Status: complete
  Erasable: Yes
  Sessions: 1
  Sectors: 2 146 176
  Size: 4,395,368,448 bytes
  Time: 476:57:51 (MM:SS:FF)
  Supported write speeds: 1 x, 2 x

  Information in the table of contents:
  Session 1...
  -> Track 01 (Mode 1, LBA: 0 - 2146175)
  -> LeadOut (LBA: 2146176)

  Pre-recorded information:
  Manufacturer ID: CMCW02

  Current Format capacity:
  Sectors: 2 146 176
  Size: 4,395,368,448 bytes
  Time: 476:57:51 (MM:SS:FF)

  Preferred Format capacity:
  Sectors: 2 297 888
  Size: 4,706,074,624 bytes
  Time: 510:40:38 (MM:SS:FF)

  Maximum Format:
  Sectors: 2 297 888
  Size: 4,706,074,624 bytes
  Time: 510:40:38 (MM:SS:FF)
  

  (2) BurnAware - I ran quick and full erase erase.  BurnAware then tells me that the disc is erased, but when I try to use it to burn the new files, it goes in a loop to tell me that he must erase the drive, run the deletion program, telling me to wipe the drive, run the deletion... without doubt ad infinitum.

  (3) active @ DVD Eraser, which is a dedicated erase utility.  He also tells me that he erased the disc successfully, both the quick and full erase operation.

  (4) while Windows Explorer will not bring up the option 'Clear' with the discs, I tried simply to delete the files on the disks.  Explorer tells me that the disc is read-only.

  Other error messages ImgBurn gave me while I'm trying to workaround:

  (a) external to Exception E06D7363

  With the drivers, I think it means that the drive is locked.

  b DeviceIoControl (FSCTL_LOCK_VOLUME) failed

  Cannot lock volume for exclusive access

  Reason: Access is denied

  ImgBurn then suggests that I have close other programs that might be using the file.  There is nothing that I see running using the file.

  Engraved on the disc files continue to play, so burn attempts success messages appear to have no effect on the disc.

  Meanwhile, other DVD - RW disks continue to work fine, until one day the player converts a unerasable disc. The first time, I thought it was a medium failure, but I do not think that several drives would fail in exactly in the same way, with issues related to future readers.  The problem of subsequent player is, of course, the Drive D not available, access denied message that comes out the D drive.  I can get it using burners do something successful, or think it is successful.

  In any case, any suggestions on how I can keep re - use RW discs?

  
  

• Won disc '; t eject the DVD drive. No error code

  I can't eject a disc I burned my DVD player. Dell XPS M1530 running windows vists. Disc plays but won't eject.

  You may have a hardware problem with your CD/DVD drive.
  Use the trick of trombone below to open it.

  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  http://www.ehow.com/how_2093458_remove-stuck-CD-from-CD.html

  http://www.insidemylaptop.com/remove-CD-DVD-disc-from-not-working-laptop/

  See you soon. Mick Murphy - Microsoft partner

• SONY TV TAV - L1 AND WHEN I TRIED TO EJECT THE DVD SCREEN LOCKED. NOW I'M STUCK FOR THE SAME MOVIE. W

  I HAVE A TV SONY TAV - L1 AND WHEN I TRIED TO EJECT DVD YESTERDAY IT SHOWS LOCKED AND IT WILL NOT EJECT. NOW I'M STUCK FOR THE SAME MOVIE. WHAT CAN I DO? IT IS NOT IN LOCK FOR CHILDREN MODE

  Hello Dimitra,

  I apologize for the inconvenience, it seems that the drawer has been locked inadvertently.  Please perform the following steps to unlock.

  1. press the power button to turn the monitor of the device.

  2 tap the input selection button to select "DVD".

  3. press and hold simultaneously the button stop and eject until 'UNLOCKED' appears on the front panel.

• DVD Player cannot read the DVDs (but can read busy DVD)

  Hello

  I have Hp Pavilion dv6-6140us, a 64-bit engine and is running windows 7... I wanted to burn the iso of windows 8, but my dvd player is not able to read blank dvd, but it can read the non-empty disc and can also play movies... Please help... want to try to win 8 preview release

  Hello

  Follow these steps to reinstall the Beats Audio interface.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are done, reboot the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K