PSC 2175 continues to try to align the printer

Similar Questions

• Aligning the print cartridge HP PSC 1500 series printer

  I just installed a new ink cartridge and try to align. When I open the HP PSC 1500 Setup page, it gives me the option "align cartridge". When I click on it it opens a dialog box titled 'printer properties '. There is no information on how to align the cartridge.

  Thanks for your reply. It didn't really solve my problem. As I've mentioned before, I tried to get the 'how' info from the HP PSC 1500 series control page that displays a link to "aligning the print cartridge. By clicking on this link opens a dialog box that has nothing to do with the alignment of the cartridges. It was not very useful, but eventually, I remembered what I had to do was insert the alignment sheet and press "scan."

• HP Deskjet D1320 align the print cartridges fail

  Hello

  So I recently broke my printer to work on a couple projects.  The old cartridges is dead, so I bought brand new and installed today.  When installing the latest software of HP printer, the alignment will fail.  Step by step:

  (1) Center of Solutions HP Open

  (2) open Toolbox

  (3) device Services tab

  (4) align the ink cartridges

  (5) align the

  However, after click on align, * nothing *.  It's as if the part of the alignment of the software was not installed.  I * can print * very well, but alignment doesn't matter.   I can also print a page of test very well.

  I also did the standard troubleshooting: remove and reinstall the cartridges, restart the printer, unplug the printer, reinstall the software.  * Nothing works.* again, it is as if the part of the alignment of the software was not installed.

  So what can I do to solve the problem of alignment?

  Thank you

  Drogan

  PS OS: Windows 7 Ultimate 64 bit SP1.  Connection: USB

  You are right.  It's a good general practice to align the printer when new cartridges are installed, but it is not mandatory.  Alignment is made for purposes of printing quality.  On this printer, the print head is part of the ink cartridge.  When a new cartridge is seated, it may or may not be in alignment.  It looks like your cartridges are in alignment.

  You could try to shut down your computer (not a reset) and do a Hard Reset of the printer as described in the following link.  Click here  After you restart the computer, is there a difference?

  If not, and the print quality is good, I recommend you skip the alignment.  If you want to be able to make an adjustment, you could try to do a complete uninstall of the printer software and download and install the drivers from hp.com.  Click here

• Try to reinstall the printer and will not install due to not having Admin rights

  original title: Instalation printer

  Try to reinstall the printer and will not install due to not having Admin rights. I am the administrator,

  How can I continue?

  Thank you

  Right click on the printer software setup.exe, etc > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Aligning the print cartridges

  Range of printers all in one HP PSC 1315

  Since receiving Microsoft updates, my computer is no longer offers me HP programs e.g. HP Director, through which I used to do analysis. I can scan with the Microsoft program, so that no problem, but when I change an ink cartridge on the HP, a color alignment page is printed automatically but seems I do not have access to the program that checks the alignment after that I have place the alignment page of color on the plate of the printer. As I am unable to perform this alignment, the printer now prints another page of alignment of color whenever I turn it on.
  How can I make the alignment, or failing that, stop the printer to automatically print a color alignment page whenever I turn it on?
  I can't reload the driver programs or other software that I got when I bought the printer, as they were on diskette, and computers do not have floppy drive.
  Troubleshooting: I checked the control panel for the printer settings.

  Hello

  Thank you very much, it worked.

  This is my first post (second if you include my original request, so don't know not how I "say 'Thank you' by clicking on the star of congratulations in the post who you helped." and "mark the post that solves your problem as"acceptable Solution"", but considered it.)

  Kind regards

  Maurice Wilkinson

• In XP, when you try to install the printer, get error "the specified port is unknown."

  See the title of the question.

  * original title - when I try to install the printer, I get the message "the specified port is unknown. This happened after cable tv and cable modem has been installed

  Thanks for your help. I am not a comp read and write to do all this.  here goes

  No printer listed. I deleted all.no ports usbxxx or dot4xxx. several others listed.

  Middle neck is the same. Intel

  the RT is Windows 2000 or xp.

  It's what I expected.

  Usbprint.sys figure 54 times more often in documents and settings. also in nt service pack driver PK. Ditto for usbmon.dll.

  This is not the case.

  1. open Windows Explorer and type C:\Windows\system32 into the address bar.
  2. find usbmon.dll
  3. right click on this file. Select properties, and then click the Version tab. Is - this version 5.1.2600.5512?  If not, is what version?
  4. now, go to the C:\Windows\system32\drivers folder
  5. what version is the usbprint.sys file?

  You have a copy of each file in C:\Windows\ServicePackFiles\i386?  If so, what are the versions of these files?

  If the usbprint.sys and usbmon.dll in C:\Windows\ServicePackFiles\i386 files are identical (or older) versions that the corresponding files in C:\Windows\system32 and C:\Windows\system32\drivers, copy the C:\Windows\ServicePackFiles\i386 files into their appropriate folders.  Then restart.

• I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it.

  I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it. I made sure they are both connected to my home network and when I go to control panel / printer and try to add a network printer / wireless. He won't find it. Any ideas?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It will be useful.

• Error 0 x 00000709 when you try to delete the print job and/or pritner.

  Original title: error 0 x 00000709.

  I have a dell laptop running windows vista Home premium SP1 with a 64-bit operating system.  I tried to remove a printer HP 1310 on my computer and it is stuck on "suppression of 1", I stop, then restart the printer spooler and now I have error 0 x 00000709 when you try to delete the print job and/or pritner.   What can I do to remove this printer.   I installed a Canon MX330 printer, but due to the printer HP being locked, I can't print with a PictBridge compatible printer.

  Hi LauraD,

  You can try to remove the printer from the safe mode and check.

  Step 1:

  You can read the following article to start in safe mode:

  Start your computer in safe mode

  Step 2: Remove the printer.

  You can read the following article to remove the printer.

  Add or remove a printer

  After deleting the printer, you can start in normal mode and try to install Canon printer.

  Hope this information is useful.

• 2072 AND 2126 ERROR when you try to use the printer

  ERROR 2072 AND 2126 WHEN YOU TRY TO USE THE PRINTER?

  Hello

  1. What is the brand and model of the printer?

  2. What is the exact error message you get?

  3 when was the last time you were able to use the printer?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the issue does not get resolved, then you can move on to method 2.

  Method 2:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Hope this helps and keep us informed if you need help.

• On Windows 8, by default, OneNote when I try to use the print option. How do I set printer as default and not in OneNote?

  When I try to use the print option. How do I set printer as default and not in OneNote? Also, when I want to print from a web page (on the Web page printing option) it goes to OneNote and not print. I have also pulled up a file saved in OneNote and selected the print option in the Menu. I selected a specific page and is nevertheless not print?

  Because your message is off-topic in the comment forum, I moved it to the forum Windows 8 "Performance and Maintenance", where it is more on the subject.

  As you watch the start page, type "default printer".  A list appears on the right side of the screen.  Tap 'settings' and 'Change the default printer' will appear on the left.  Tap it.  Your devices folder and printers opens on the desktop.  You will see that "Send to OneNote" will have a green check mark next to it.  Right click on the printer, if you have already installed it, then select "Set as default".  Close the folder.  Therefore, when printing, your printer will be the default device.

  If you have not yet installed a printer, make sure you download the latest driver for 8 compatible of Windows to the web site of the manufacturer and install the driver following the instructions of the manufacturer.  Then set the default device.

• Computer continues to try to install the backup. He asked me to find a path to a folder containing the installation package 'SpareBackup.msi' I can't find it anywhere on my computer.

  SpareBackup.msi installation package

  Computer MT continues to try to run a backup. He asked me to find a path to a folder containing the installation package 'SpareBackup.msi' I can't find it anywhere on my computer. I keep getting is not available.

  Hello

  1. when exactly you get invites him to install SpareBackup.msi?

  Method 1:

  I recommend you perform the clean boot that this issue could be caused by some third party software.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also download and run a full scan of the system using the Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Windows 8 - changed site IP addresses and machine continues to try to use the old IP

  A remote office that I support the switch IP addresses.   When I try to do a ping of the domain, remote.foo.com, the machine attempts to solve the old IP address.  Do a NSLookup displays the new IP address.  If I try to ping the new IP I get any results either.

  I did an ipconfig/flushdns (said it was successful) but still no luck and it is not defined in my hosts file.  Where can you win 8 could be cached IP address?  I have another computer on my home network and it resolved the new IP very well, so it is not be cached in the router or whatever it is - something on the laptop.

  Thanks for the help.

  Hi Kzim,

  I suggest asking your question on the Technet forum, where we have some support professionals who are well equipped with knowledge on area issues, to do so please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itpronetworking

  I hope this helps.

• Acrobat continues to try to open the files to webroot start

  Whenever I restart my computer, my download manager opens and there's a message that adobe cannot open the associated files of webroot.

  Hi marym91257776,

  Disable Webroot, open the drive and go to the Help menu, check the updates & install updates, as appropriate.

  Again activate Webroot.

  Do not try to reproduce the problem. Let me know how it goes.

  Kind regards
  Nicos

• Aligning the print cartridge HP Photosmart C7280 Print failed - prints in everything but black

  When I print, it comes out in pink/red.

  I bought all new ink cartridges and done a master reset and I still get the error that does not have the print cartridge alignment.

  Hello

  Please try the step and then try alignment process listed below.

  on the screen of the printer.

  1. Press the key SETUP (key), then
  2. Then press TOOLS,
  3. Press the CLEAN print head / cartridge.

  Make sure that the ink cartridges should be at least 25% full.

  Note: you need to repeat the above steps 2 - 3 times.

  If issue still persits, it could be a defective black cartridge or print head. In which case you could call the HP Technical Support for assistance.

  If you are in the United States, the toll free # is 1-800-474-6836.

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• Lousy print quality no matter how many times I clean and align the printer.

  I really like this printer, so don't want to give up on this! Then... color printing is fine. Is the black which is ruin. Clean the printheads several times and the report that prints shows the problem... printing of text is faded in task, lack of parts or lines through the text and others. I've lined up the heads and that works great... have replaced the black ink cartridge, but still the same issue.

  Any ideas would be great... we had a paper jam at the time but it is erased, but perhaps it damaged something? Or is it a manual cleaning, I can do that could clarify this?

  THX... ~ Paul

  And so... I continued to clean the print heads, repeatedly... dozen or several times and it finally started getting better little by little. Clean them some more and finally got the head to complete alignment properly. Then I'll call this resolved for now, and there you have it... clean, clean and clean...