PSC1410: Printer print is no longer

Similar Questions

• Photosmart 7520: After 5 minutes is printer is no longer available on wifi

  After 5 minutes is printer is no longer available on wifi. This means that after 5 minutes, the printer is always connected to the wifi but when I try to print from an iPhone or I touch no printer is online.
  The printer go back online if I disable a turn on the printer again.
  I tried the common wifi fix on this forum without solution.
  Any help?

  Finally, I solved with a change of router.
  I bought a new router a TP link wr841N instead of the Belkin and now everything is perfect with a solid connection.

• Help! HP Deskjet 6980 print is no longer in duplex

  I recently upgraded from Windows XP to Windows Vista and reinstalled the software / drivers for my Deskjet 6980.  Everything went well spent - it is printing without wire - but for some reason the automatic duplex printing function no longer works.  Even when I select the automatic duplex printing option in the printer preferences, it does not print duplex.  Is there a way to fix this?

  Thanks in advance!

  Vista can default the duplexer "not installed".  Go to the Printers folder, right-click on the Deskjet 6980, run as administrator, properties, parameters of the device and the unit installed duplex and duplex manual to disabled, apply, OK.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• Printer processor no longer on my computer

  I have Windows XP Media Center Edition 2002 series, and the PRINT PROCESSOR does not exist so my Kodak printer will no longer work with her.  How can I get the processor of the printer on my computer?  It works perfectly until a month ago, then the printer has stopped working with my computer.  Kodak has been contacted and took control of my computer, and then could not solve the problem and reminded earlier.  With control even once, Kodak showed me that the error led to a printer on Ms missing processor.

  I have automated updates of Windows, so I don't understand how this 'left' my computer element.  Ms. wants $99 back on my computer... but there must be a simpler solution.  Any suggestions?  Thank you

  The computer has service pack 3.  The error says"cannot install the printer.  The print processor does not exist"... does this help?

  Not really.  I had this error before.

  There is a Microsoft KB Article that address this issue: http://support.microsoft.com/kb/906752 but I'm a little suspicious of the applicability of this article because (a) you probably have a printer standard consumer (which is unlikely to have a "custom print processor"), (b) If your printer requires a "custom print processor", then Kodak should have known on this subject and what is provided , and (c) your system apparently works OK without the hotfix mentioned in the article.

  Although I can't guarantee it will solve your problem, I suggest that you clean your printer drivers by following the instructions here--> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  Before you start to follow Bruce, open Control Panel > add or remove programs and remove anything related to your printer.  Restart the computer.

  Then follow the steps of Bruce 1-5.  Restart the computer.  As Bruce wrote, these measures should be sufficient, but if you want to be great depth, download and run cleanspl.exe OR follow steps 6-14 (in step 9, do not start the spooler or you will probably not be able to delete the files in the later stages; the spooler is restarted in step 14).

  When you are finished, reinstall the printer as if you were doing so for the first time.  Do not connect the printer to your computer until you are prompted to do so by the software.  You should probably go on the Kodak website and download the latest software for your printer package; Otherwise, use the CD that comes with it.

• Printer files sent to a printer that no longer exists. The location of these files?

  Help a friend to connect to its Internet to ATT. There are several elements that had to be printed. Clicking on the print icon and they were sent to a printer that no longer exists. She had changed the printer, but the default was always the old man.
  Where are the files stored? Coil?
  I can't recover them and there still waiting to be printed, but in the old printer icon.
  Any help?

  Windows XP

  Thank you

  Go to Control Panel then printer and Fax and you could set your printer and also delete the one that is missing.

  It is advisable to run this tool:

  http://support.Microsoft.com/mats/printing_problems/

• Printer HP PhotoSmart C309g print is no longer black text, graphics, etc.

  Hello:

  We have a HP laptop.

  We have a C309g wireless HP PhotoSmart all-in-One printer/scanner/copier.

  It has worked very well for a few years, until 2 days ago.

  It allows to print is no longer in black (colors and black Photo work very well).

  We have it removed... removed all ink cartridges, removed the cartridge caddy,

  clean the electrodes, replaced the caddy, installed 5 cartridges (all) new, etc.

  We went through the process of removing the cartridges, caddy, locking,

  remove the power cord, wait a few minutes, and then make the process reverse.

  When you turn on the printer, it does its auto-check/install and after about 4-5 minutes

  We said that the installation failed, the press the OK button.

  We went thorugh this process several times, and the facility has failed every time.

  In the past, installation of printer cartridges, cleaning, calibration... executed quickly.

  The printer will not print anything that is black, that he me a print from Word, Notepad,

  make a direct copy of the glass, etc... together, with the phone on or off, but it will not

  print anything in black standard.

  The colors and black Photo print correctly but the regular black does not.

  The output of the other 4 cartridges are sharp, crisp, etc..

  Anything... text, graphics, etc. in the standard black does not print.

  Any ideas.

  Thank you

  -DaleBr

  OK, I understand you have checked the vents and they were OK (or you clean them?).

  Have you run three rounds of cleaning of the façade?

  Did you soak the printhead?

  If you've done everything above, I've seen a few cases was a hard reset solves the problem.  To do this turn on the printer, then unplug the USB cable from the printer and then unplug the power cable from the printer for a minute.  Then replace the power cable and turn on the printer, then replace the USB cable.

• Can print is no longer from Outlook 2007

  I can print is no longer using Outlook 2007, when I press the Preview button before printing in Outlook.  I get a message: "there is a problem with the selected printer.  You may need to reinstall the printer.  Try again or use a different printer. "I can print directly from Outlook, as long I don't push print-preview.  I uninstalled and reinstalled the printer and will continue to receive the same error message.  I can print any other documents of the suite Office 2007 (Word and Excel) even after pressing preview before printing, but not in Outlook 2007.  Any ideas on how to solve this problem?  I use Vista 64-bit and a HP OfficeJet 6000 wireless printer.  I've felt a problem since Outlook until today.

  Have you gone in Panel of-> Windows Update. and checked "view update history"?  I guess it is possible that the KB2509470 somehow got reinstalled - although I don't know how that would have occurred.  If she did get resettled, just uninstall it again.  If you do not see even if the list, then maybe it's a new problem.

• I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. V5.9.1

  I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. The HP utility is v5.9.1, Mac OS x 10.7. I did the software update and a new driver HP was part of the package. HP ePrint still works, and print tests are okay for General network settings are intact. None of the applications that use the print dialogue box standard and local networking make it through the print queue. Any tips? Any way to roll back a driver version? Or quickly get the next revision and hope printing works again? Thank you.

  Update: OSX-specific Version is 10.7.5, model of the printer is HP OfficeJet 8600. See you soon.

  Hello

  Try to reboot the router and check if that can help you.

  After connecting the back of the router, wait 30-60 seconds and restart the printer and Mac.

  If it persists, try resettign the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now reconfigure the device by following the HP (under Utilities Applications\hewlett-Packard\Device) installation wizard.

  Please let me know if this can help,

  Shlomi

• It is good to turn on the printer for a long time?

  Hi all

  It is good to turn on the printer for a long time? It causes health and ink?
  Thank you

  Hi AhamedSajad,

  Are there specific that appeal to you?

  Turn on the printer for a long time would not adversely affect his health. Nor does it affect the ink somehow.
  The ink could get used only when you use the printer to print.
   
  I hope this helps.

• HP printer Assistant no longer works

  Because of an update, the HP printing software no longer works.  More important still, I used to have the "Scan to Computer" service activated permanently and cannot determine how I should do now.  By clicking on the "HP printer Assistant" in the HP Officejet 6500 E710n-z app does nothing.

  Hello

  Uninstall your current software by following the uninstall option in the start menu of the printer folder.

  Then download and install the latest version of the software below, which should restore any functionality back:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109384-2&cc=us&DLC=en&LC=en&OS=4062&product=4083977&sw_lang=

  Shlomi

• Want 5661: Envy 5661 - "ink and toner for this printer is no longer supported by HP.

  I bought my desire 5661 at Costco, not so long ago and now find the ink cartridges are abandoned? It is still under warranty!  How can I source HP cartridges or what are my options?

  Hello

  You can order:

  https://h22203.www2.HP.com/SureSupply/printers/ink/HP-envy-5661-e-all-in-one-printer

  Kind regards.

• Duplex printing is no longer

  I have a printer MFP M1217 nfw used to be connected to an iMac with a USB cable. I reinstalled as a WiFi printer and the print dialog box no longer shows the box to have chosen double-sided printing. Any help?

  Hi JVCosta,

  Thank you for the additional information. First go to print/scanners Apple System Preferences, delete the printer MFP of M1217 nfw. You can run the HP installation wizard. This will be implemented for the wireless drivers. Thank you.

  Hope it will be useful.

  Thank you.

• Printer is no longer printing - multiple computers

  My embarrassing problem.  I have a home network, which has 5 computers on him; 2 corporate laptops and home 3.

  1 corporate computer has been connected via the USB switch port to share the printer and audio/keyboard/mouse for two years with 1 office home for a psc 2510

  2 mobile company ever printed on personal printer, nor has any other desktop computer

  1 laptop to print to the main 2510 HP PSC.

  Now, the only one that still prints is the reception desk.

  The scan option still works for the company 1 computer, but printing does not work.  In properties, all the parts are loaded into analogues on the desktop but still nothing.

  I have re-downloaded the drivers and those developed to date, but still no can do.

  The laptop is no longer detects printer even though you can still see the home network (which is no longer the printer sees).  It indicates that the driver is not available, but I have re-download.

  Hello

  Please contact Microsoft Community.

  I understand that your printer is not printing.

  I will definitely help you with this.

  I suggest you go through the below methods:

  Method 1: Try to run the printer Troubleshooter:

  1. Press Windows + R key.

  2. Type command and press ENTER.

  3. Click on troubleshooting.

  4. In the left pane, click View all.

  5. In the list, double-click the printer and run the troubleshooter.

  Method 2: Try the clean boot:

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Also check out the link below:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• HP 990 cm print is no longer the color since the upgrade to the new iMac with Mountain Lion

  Have an older CV (990c, m series) which worked fine on my iMac Leopard PPC (X.5.8) running.

  Since the upgrade to the new Intel iMac running Mountain Lion (the most recent software upgrades / w X.8.2) this printer will print only in black and white, despite having new color and cartridges inkjet black installed - even the test pattern that prints automatically when I changed the print cartridges only in B & W.

  The detailed print dialog box that appears when I try to print a color page does not include the usual option to print in color.

  I think that HP is no longer provides this older printer drivers but guess they are in the software updates in Mac OS.

  Someone has an idea how I can fix it, or is it just time to recycle this printer and buy a new one?

  TIA

  Caroline

  Hello

  The most recent is available in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=61686

  Probably time to buy a new printer.

• HP LaserJet 2605dn display is empty and allows to print is no longer

  I had this printer for several years and has always worked flawlessly, until recently. I met a serious jam and still had 40 + pages in the buffer that could not be re-created easily, so I decided to leave the computer while eliminating the jammed pages (2), and the printer continued and terminated the print job. To reach the pages stuck, I had to remove the upper part of the printer. I don't remember if the display exploded immediately, or not, but there are NO DISPLAY on the printer now.   In addition, shortly after this jam, the printer stopped printing.

  I am running Vista. I turned off the printer unplugged, unplugged the USB, restarted the computer, not reconnected everything and still no display or print. I deleted the printer and added, but still not.

  A I mess up something when I removed the upper part of the printer?

  Any suggestions? Thank you!

  Oh, my! That was so long ago. But, if I remember correctly, when I shot the top of the printer, there was a very small wire with a plastic connector at the end which had pulled the apartment when I removed the upper part. I probably had to use tweezers to reconnect.  Sorry for the hazy details, but it's what is on the floor these days! Good luck.