PSC2175 ALL-IN-ONE SLOW PRINTING

PSC2175 all in one is grinding to a halt. Very slow to print/copy anything.

Operating systems Windows Vista (Home).  Dell Inspiron 530 PC desktop model.

Use Trend Micro Internet Security 2009 which is scanned frequently.

By giving the command to print (from say Internet or Word) I get message "printing" and then it just sits (flashing green Copy). After a minute, it can print a line... then expected and repeats.  Takes 10 minutes to print the document.

I have been informed that he is likely to be a fault of the printer rather than any virus from (?)

My not great it skills.

OK the printer is 4 years!

Scotty48

Don't you have the slow print even if you make a copy?  If Yes, then the likely cause is a faulty cartridge.  If your printer supports printing in reserve mode you can remove the black cartridge and try to print a page (not), if this is normal, then replace the black cartridge and remove the color cartridge.  The cartridge that prints at the normal speed is OK, the other is a problem and needs to be replaced.

Tags: HP Printers

Similar Questions

  • 5520 HP all-in-one slow printing

    Our office got 2 new printers. I have a printer all-in-one of 5520 and it prints super slow. It will print a line and then wait for about 7 seconds and print another line and so on. It is connected by USB. Anyone know what may be the problem? We also have an Office Jet 8100 that does the same thing.  Thank you

    Because changing the cartridge have not solved the problem, I suggest you contact HP to service.

  • Router/HP PSC2175 all-in-One Printer

    Is it possible to connect my HP PSC2175 all-in-one printer into the USB port in my router wureless and set it up as a NETWORK printer, so I can use wireless to all 2 of my computers?

    Karibou

    Hello

    I have not it will work. You need a print server to handle this, because the network of the whole House knows nothing about the printer even plug into the wireless router. It is an example of a print server:

    http://www.netcomm.com.au/products/print-servers

    Kind regards

  • How can I keep my HP1510 all-in-one to print the test pages as much?

    How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

    Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

    The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

  • F2110 All In One HP: Printer prints blue instead of green

    I have an All In One older printer that worked perfectly for me. I tried to print something last night and every time the green color was susposed to print blue print instead. I replaced the color cartridge and still have blue instead of green. I tried everything I can think but can not get the printer to print in green. The strange thing is that I photocopied a picture with lots of greenery and it printed perfectly green.  Any ideas will be greatly appreciated.

    Hi @andalcam,

    Thanks for joining the Forums of HP Support for a solution to your printing problem.

    I understand that you use a printer all-in-one of HP Deskjet F2110 with computer Windows 10 and green print blue, but the colors are just when you copy. I would like to help with that.

    The fact that it can copy well little indicates that the printer should work. Here is a document of support designed to be used with this problem so you can be sure - colors wrong.

    Then download and run the HP print and Scan Doctor to verify installed software. This tool can diagnose and solve many problems of printing software and printer.

    Please let me know if that solves the problem, or if you need assistance.
  • HP All in One deskjet printer: X HP

    I have my HP all in one Deskjet Printer 3522 programmed to Eprinting from my cell phone wireless. I want to add a second computer to wireless network for Eprinting.  What are the steps to add the second computer.

    I had taken these measures as soon as possible.  As stated earlier I just needed to create the homegroup and get matching password on both computers. Once everything very easy, I determined the steps to follow. Printer works on both computers.

  • Suddenly, my 4215 all in one HP printer error message reads "remove and check right cartridge".

    My all-in-one 4215 printer suddenly flashes an error message on the screen saying "remove and check right cartridge"... For what I'm checking, it is unclear. I deleted and reinstalled the cartridge and it seems OK to me... It is not empty, and the last thing that he printed was fine... Help!

    I am betting that the printer or the ink cartridge contacts are dirty. This happens over time. The document below will guide you through cleaning the contacts. Let me know what happens.

    http://goo.GL/9oXc9

  • Dell 964 all in one Photo Printer not Scan

    I have a desktop Dell Dimension 3100/E310 with a Dell 964 All In One Photo Printer.  I have Windows XP on it.

    I had to re - install the printer drives and software.  I can get the documents to print correctly.  I can get the printer to scan by using the controls on the printer.  However, if I try to scan from the Dell 964 all in one Center on the computer, I get an error message that says:

    Scan failed

    Try these solutions:

    * Make sure the all-in-one is powered.  (IT IS).

    * Disconnect and reconnect the USB cable.  (I DID.)

    * Disconnect, then reconnect the power cable from the all-in-one.  (I DID.)

    * Restart the computer. (I DID.)

    Nothing has worked.

    Does anyone have any suggestions?

    Thank you.

    ColemanCreative,

    You should be able to scan from the Dell all-in-one Center.

    Make sure that the application that you want to scan to figure on the list. Try to read...

    Update of the list of applications to send scans to

    If you are trying to scan to a PDF or by fax, you must install the OCR program from the disk of the printer.

    In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

    Rick

  • HP Deskjet 2540 all-in-one series printer need all the model compatible ink cartridge

    Need of compatible cartridges for HP Deskjet 2540 all-in-one series printer. Need all the compatible ink cartridge model #' s. hard to find here in Tahiti (Moorea).

    Hello @bubbamoorea,

    Welcome to the HP Forums!

    I understand that you need compatible ink cartridges for the Deskjet 2540. I will do my best to help you. I recommend the continuation of this entire HP document on cartridges. You can go to the website of HP SureSupply here, which shows the compatible ink for your printer cartridge (HP 61 black and tri-color 61).

    You can also buy these cartridges on this Web site. If you have any further questions, please let me know. Have a good night!

  • HP OfficeJet 7310 all-in-One slow takes 15 minutes to print the page

    Why my HP OfficeJet 7310 all-in-One printer suddenly run so slow it takes 15 minutes or more to print a page? I use MacBook with OS 10.7 Lion and reinstalled the latest drivers that have been for OS Snow Leopard. How to speed this up?

    Hello

    If the same behavior appears in copying autonomous

    Even though the USB cable is disconnected, so the computer is without impact on the device and not related to the problem

    By the information provided, the problem is with your printer hardware

    However, make sure that your cartridges are without impact on your printer

    Make sure the expirations of ink did not both for black and color, as well, try to isolate the problem and check if cartridges it may as follows

    Remove the color cartridge and try to print from the computer

    Now repeat the same thing with black ink only

    If the problem occurs with a specific cartridge only, replace the cartridge.

    If the same behavior is displayed for either of these tests, I suggest you try a different power outlet. If there is no change yet, contact the HP call center in your area, in an attempt to reset your device.

    It is our last chance, otherwise it will repair the product

  • PSC 2110 all-in-one now prints VERY SLOW

    Maybe I just need to bury it, but my psc 2110 started extremely slow printing - 15 minutes for the align cartridges page, 17 minutes for the 'self-assessment report.  So, it has nothing to do with the connection between the printer and the computer (these prints are of the printer itself).  I tried unplugging everything, wait, and plug it in; Remove and reinsert the ink cartridges; align the print cartridges; Download the HP printer utility (who reported "No problems found"); looking for an update (it says I have the latest).  Any ideas?

    If the printer prints a swath, and then pauses for 15 seconds before the next broke then probably the issue is one of the ink cartridges has failed.  If the PSC 2110 is capable of printing mode reserve (with one of the removed cartridges), then you can remove a cartridge, print something, then replace the cartridge, remove the cartridge else and print something.

    Whatever that cauese cartridge the printer to print slowly is the culprit and should be replaced.  If the PSC 2110 does not support the mode of the reserve, then you will have to use trial and error to find out what cartridge is at fault.  I would like to start with the black cartridge.

  • HP all-in - One C7280 print super slow... same test print windows

    My C7280 was good wireless printing... I have since moved the printer in another room, which is right next to my wireless router and now it prints super slow.  It takes minutes for a black and white page.  It almost seems that it is printing on very high resolution and prints 2-3 lines then pauses then prints a little more and takes over the ground.  Any advice or ideas is appreciated!

    It's like the thing as being too close to the wireless router, try to move at least 15 feet away.  Also, just turn and then again, sometimes, which erases the slow printing.

  • J510 printer all-in-one: J510a Printer driver actulization

    Update mi del printer software "all in one" when you try to find out if I did OK, the scan and printer Hp Dr.that gave me said that I have a conflict and suggestt that I uninstall the whole software and I should get hpcostumercare but I canoe find. I use a laptop a HP Pavilion PC enterteiment.

    Hi @donfulgencio,

    Thank you for joining the HP Forums!

    I understand that you're having trouble finding the driver for your HP Deskjet 2050 printer. I'm happy to take a look for you!

    You can download the drivers and full software features by clicking on this link. HP Deskjet 2050 / 2050 all-in - One Printer series - J510 A full feature software and driver. Or, you can use the recommended option, which is our printer HP install wizard for Windows.

    If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

    I hope that this post solves your problem!

  • my all in one 2610 printer is not compatible with the imac using Yosemite

    my HP all in one printer 2610 does not seem to be recognized by my new imac and I kept problems so uninstalled. Now, I want to try and reinstall it, it says that yosemtie does not support PC applications. Is there a way around this or do I have to buy a new printer? If I can anyone recommend a good that is compatible with my iMac?

    We invite you with pleasure!

    Scanner failure indicate a hardware failure of the bulb scanner, such a harware failure is likely to prevent other features like the all-in-one device is based on one of its components and the device is ' t ready to process a print job.

    Follow these steps to disturb such a, if the question is I'm afraid, maybe it's time for a new printer:

    http://support.HP.com/us-en/product/HP-Photosmart-2600-all-in-one-printer-series/391114/model/391116/document/c00587971/

    Kind regards

    Shlomi

  • J4680 ALL IN ONE: POWER PRINT; UNABLE TO FAX OR SCAN CONNECTED WIRELESS.

    ERROR MESSAGE CONSTANTLY ERROR 358

    Hey @GS44,

    Welcome to the Forums of HP's Support.

    I understand that you encounter some issues an error message when scanning for your Officejet J4680 all-in-One printer to your computer Mac OSX 10.11. I can help you with that, but I'll need to know if you see the message on your computer or a printer. I also need to know what program you want to scan to. and if you are able to make a copy of the façade. Once I know that I will be better able to help you.

Maybe you are looking for

  • I want to learn how to set the new tab page to load at startup of firefox (as the homepage only).

    I want to put the new section as my home page. In other words, I want to show him when I open firefox and when I click on the home button. I don't know if it's in the current scope of firefox.

  • It is illegal to build your Hackintosh?

    I really want to buy a Mac Pro, but it's too expensive. I heard that you can add your RAM and build a Mac computer or a Hackintosh, which acts as a Mac Pro but costs less than $3,000. Is this a violation?

  • How long does take to deploy the config on 4240?

    I noticed a config very long deployment on 4240. In CLI I have several changes to the configuration of virtualSensor, answered Yes at the prompt 'Apply changes?' and it takes about 20 minutes to start sniffing interfaces (traffic started) again. That

  • How to close a PopupScreen

    Hi, I'm a newbie here. I have 1 button on my PopupScreen.I want to click it then to do sth. To maintain the display, I use pushGlobalScreen as below: UiApplication.getUiApplication().pushGlobalScreen(new pScreen(), 1,true); then: final class pScreen

  • Change the setting of appropriate on T500 power

    I have a T500 with Windows 7. When the machine is on battery, rather than the socket, he returned to the login screen after only one or two minutes of non-use. I would like to increase this time, or set up so that the machine remains active, but cann