PTC-90010: Installation failed. Please see the system log.

Similar Questions

• Windows 7 Interactive logon process initialization has failed. For more details, please see the event log.

  Has anyone received this error.

  Help, please

  Hi cweberestate,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  Method 1

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Method 2

  If you are able to boot into Windows in the trunk and then try the clean boot procedure and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• the interactive logon process initialization has failed. For more details, please see the event log.

  This error appears when I start my computer. I press ok and it does nothing. I tried to go it's the safe mode, repair, backup and insterting the disc. None of this works. I come to the same thing. I don't know how to make sure my cd starts immediately. I can't get into anything on my computer. Please can you help me? my computer is a dell and only 1 year. I contacted dell and they couldn't help me because it was not a hardware problem. its software.

  Look here:

  http://forums.techarena.in/operating-systems/1121072.htm

• Cannot use PS CC get this message on macbook air you run an operating system that Photoshop can't stand anymore. See the system requirements for a complete list of the supported platforms.

  get this message

  You are running an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms.

  Hello

  Please see the system requirements for photoshop: -.

  Configuration of Photoshop

• I am trying to download illustrator and I sating which run an operating system supporting Illustrator is no longer. See the system requirements for a complete list of the supported platforms.

  Anyone know how I can update?

  Hello

  Please see the system requirements: -.

  System requirements | Illustrator

  In case you are on MAC - contact Apple for support!

  For windows - contact Microsoft!

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• User profile service, you have been logged with the default for the system profile, please see the the event log for more information or contact your administrator.

  User profile service... Help... I'm stuck and going nowhere.

  Hello

  Whenever my user try to connect this MSG poping up to the top of any solution please.

  User profile service

  you have been logged on with the default for the system profile, please see the the event log for more information or contact your administrator.

  Click on this URL and follow the instructions 100% your problem has been resolved http: //support.microsoft.com/kb/947215

  Try it.

• I tried to install an update for CS6, but every time he tells me that the installation failed due to the error um44m2p7 help please!

  I tried to install an update for CS6, but every time he tells me that the installation failed due to the error um44m2p7 help please!

  Refer

  Do not install updates | Failure to update or U44M errors

• I entered my CC number and my monthly payment. When I try to download Photoshop it says 'you are running an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. "After looki

  I entered my CC number and my monthly payment. When I try to download Photoshop it says 'you are running an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. "After watching computer software system preferences is up to date and my google chrome is updated. How can I get photoshop?

  Please check the requirements for Photoshop and see if your system meets the requirements:

  FAQ: What are the system requirements for the desktop creative cloud application and every creative application of Cloud?

  If your system meets the requirements, please see the FAQ for installation instructions:

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: How to launch creative Cloud Apps

• Login to view server license key is not valid. Please contact the system administrator

  About 6 weeks ago, I installed a server connection view assessment. The installation went well.

  Then I needed to divert my attention to another project. Now that I'm back I lost track of the server.

  I built a new W2003 server to use as the display of connection to the server and installed VMware-viewconnectionserver - 3.1.1 - 175957.

  The installation went well. When I try to connect the first time with the help of the

  after URL: https://& lt; server_name & gt; /, introduced by the following

  Message:

  'Display connection Server License key is not valid. Please contact the system administrator. »

  I now have a valid license to apply, but don't know how to hit the administration

  screen. So, you can see the catch-22.

  There is an additional path should I use in the URL?

  Thanks,-Jeff

  Add/admin at the end of the URL path.

• How to defragment the drive d error: some files on this volume could not be defragmented. Please see the report for a list of these files defragmentation.

  Original title: how to defragment the d drive

  Defragmentation is complete for: (c :)) some files on this volume could not be defragmented. Please see the report for a list of these files defragmentation.   I solve this problem with pagedefrag but same problem with the D: drive. What can I do? is a D: disk defragmentation program at system startup? Please help me :(

  Its a simple but problem ongoing with the pagefile... The hd is in use & cannot defragment parts of it

  because of this, use to defrag times. To fix the files fragmented on any hard drive, open the system

  Properties, performance, advance, the page file, change the button, select the hd, press "no paging file" value

  Enter 2 X, close, restart the pc. Once in xp, open cmd, type: CLEANMGR then select the hd,

  type: Defrag D: D: being fragmented, once through, hd output cmd, return to system properties, set

  the swap file for hd to "let the system manage", click 2 x game, close, you get a couple of windows

  saying: 'replace the file' say Yes close... Sometimes you have to try several, but you will succeed...

• Whenever I turn on my computer I get a box that pops up and say "Update: there is an error during installation." Please reinstall the application.

  Whenever I turn on my computer I get a box that pops up and say "Update: there is an error during installation." Please reinstall the application"How can I do this?

  Original title: when I turn on my computer

  You should consider carefully as pop - up and determine what application has a problem.

  If he has no idea anywhere in the pop - up, first physically disconnect your computer from the Internet (because in the following steps, you will temporarily disable your antivirus software).

  • Click Start and type "msconfig.exe" (without the quotes) in the search box and press ENTER.
  • When the "System Configuration" window opens, select the tab "start".
  • Uncheck the half of the listed items (for your convenience, click on "Startup Item" in the column header to sort the items alphabetically)
  • Click OK and restart (click here to avoid the warning that you are in a diagnostic mode)

    If the pop-up warning does NOT appear, the problem application has been one of the items you unchecked.  If this is the case, reopen the System Configuration and check again half of the elements that had checked you.

    Similarly, if the pop-up warning appears, then the application problem is that remained turned on. In this case, open the Configuration of the system, again check the items that you had disabled, then uncheck half of the remaining items.

  • Restart and continue the process until you have identified the problem application.
  • Once you have identified the problem application, open System Configuration once more, select "Normal startup" on the "Général" tab and restart.
  • Do not forget to reconnect your computer to the Internet
  • Uninstall or reinstall the application issue.

• When trying to access the tab elements of remuneration for work of the buyer to get the error you encountered an unexpected error. Please contact the system administrator for assistance.

  When you try to access the tab to pay the buyer work center items get error:

  You have encountered an unexpected error. Please contact the system administrator for assistance. (Without any additional information)

  Please need help on how to solve this problem.

  Thank you

  Rambeau

  It seems bug-

  Please see - Center of the buyer: make an Exception when clicking on PAY tab ELEMENTS (Doc ID 1993378.1)

  Kind regards

  Kiran