Publication in border problems.

Similar Questions

• film director publication for computer problems / sound but no video

  I can do and get a glimpse of a sd video in movie maker, but when I publish it, some of the clips have audio but not video. I also tried the publication of a dvd and the same result. Sometimes I can watch the clips in media player until I send them to movie maker and sometimes I can't. It also appears if I try to take the file from my documents before publication and reformat, isn't there? I had this problem throughout, I thought that I understood when I used some formats, but it doesn't seem to be the case. What can we do? I have several formats of videos on my computer

  I can do and get a glimpse of a sd video in movie maker, but when I publish it, some of the clips have audio but not video. I also tried the publication of a dvd and the same result. Sometimes I can watch the clips in media player until I send them to movie maker and sometimes I can't. It also appears if I try to take the file from my documents before publication and reformat, isn't there? I had this problem throughout, I thought that I understood when I used some formats, but it doesn't seem to be the case. What can we do? I have several formats of videos on my computer

  ==============================================
  Brief paragraph... many questions... I'll try to come up with a few ideas...

  The free VLC Media Player can play any video...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  The file you are trying to convert may be a project .mswmm file
  It is only compatible with Movie Maker... they cannot be converted.

  When you try to access a video clip that you "know" is sometimes in a
  file, but you can not see... is it because that the format of in that the video is
  not compatibile with the software you are trying to access.

  The following freeware is a useful tool to convert a lot of different
  Movie Maker formats...... use the conversion to WMV format would be
  a good choice.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (the file you want to download is: > FFSetup260.zip
  (FWIW... installation..., you might want to
  Uncheck the box 'all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Border problem

  Hey all, I'm creating a customButtons using the basic model published by BB and I was wondering how to get rid of the border? I have spots of darker colours which generate a horrible color border when created, and I was wondering how to solve this problem.  I tried to create a border with custom XYedges, however this has no effect. What is the easiest way to solve the problem?

  as always, thank you guys.

  Maybe it's not the border.

  It could be the focus or something that is painted in her object or paintBackground().

  Try substituting the methods:

  1 drawFocus

  2 paint

  3 paintBackground

  And see if it has an effect.

  E.

• border problem is not show on the right

  Hello

  I create two LabelField label1 and label2 and then I added the border both of them... and then I added

  thesefields to HorizontalFieldManager...

  Problem is that when I use the method of layout in LabelField (label1) and border on the right side of the LableField (label2) does not appear...

  LabelField label1 = new LabelField ("IMEI")
  {
  protected void paint (Graphics g)
  {
  g.setColor (Color.WHITE);
  Super.Paint (g);
  }
  protected void layout (int width, int height)
  {
  Super.Layout (width, height);
  setMargin (new XYEdges (0,0,0,50));
  }
  };
  Label1.setbackground (BackgroundFactory.createLinearGradientBackground (Color.Green, Color.Green, Color.Green, Color.Green));
  Label1.setBorder (BorderFactory.createBevelBorder (XYEdges (2,0,2,2))) of new;

  LabelField label2 = new LabelField ("dasd");

  Label2.setbackground (BackgroundFactory.createLinearGradientBackground (Color.Green, Color.Green, Color.Green, Color.Green));
  Label2.setBorder (BorderFactory.createBevelBorder (XYEdges (2,2,2,2))) of new;

  HFM HorizontalFieldManager = new HorizontalFieldManager();
        
  HFM. Add (Label1);
  HFM. Add (Label2);

  I don't know what the problem is, but you need to move this:

  setMargin (new XYEdges (0,0,0,50));

  out of the page layout.  The framework calls available when we want to know how much space to allocate to the device.  You have to set the margin before that date.

  So get out there and make a

  Label1.setMargin..)

  as you define the border.

  I see that your two BorderFactory calls are slightly different.  Is - it deliberate?

• Create a deep round border problem!

  Hello

  I have a FlowFieldManager with 2 fields inside. I want a rounded border. I tried with

  Border border = BorderFactory.createRoundedBorder(new XYEdges(3, 14, 3, 14), Color.WHITE, Border.STYLE_FILLED);
  ffm.setBorder(border);
  

  With the above code, I get a soft edge, but I want the curve on the left & right to be rounder. If I increase the value of left & right that is 3, the component is not visible properly. Components are installed using sublayout(), so the width and height of the Manager is stable.

  To resolve this problem, I think I had to use graphics.fillRoundRect (). I tried the following code:

  ffm = new FlowFieldManager(VerticalFieldManager.FIELD_HCENTER) {
              protected void paint(Graphics g) {
                  g.setBackgroundColor(Color.WHITE);
                  g.fillRoundRect(1, 3, getWidth(), getHeight(), 10, 5);
              }
          };
          ffm.add(txt);
          ffm.add(btn);
          add(ffm);
  

  With the above code, I see only a black area instead of the Manager of the ffm.

  Can someone point out where I'm going wrong and how to fix it?

  I can't wait to figure out this problem. Any help is appreciated.

  Thank you

  Try this

  protected void paint(Graphics g) {
          int oldColor = g.getColor();
          g.setColor(Color.BLUE);
              g.drawRoundRect(1, 1, getWidth(), getHeight(), 24, 24);
              g.setColor(oldColor);
              super.paint(g);
              }
  

• Publication of MUSE problem

  Hello! I just use (free) BusinessCatalyst to publish my site. Everything seems ok, but when I try to go from one page to another, it does not save other pages but principal and contact. There are a few missing pages. I can't find the answer to this problem and I hope someone wiser could help me. Here you can see the problem ETUSIVU , I stuck the page name here and it will automatically change on the behalf of the homepage? Thank you.

  Did you publish the files as described in the publication Adobe Business Catalyst Muse Web sites ?

  Thank you

  Preran

• Border problems with background image

  Hello

  I have a problem with my background image. I have fillings of browser size the original value and activated scale option in the middle. The image has a resolution of 1920x1080px. But when I now change the size of my browser I get a white border on the left or on the right size.

  
  

  Small to large size of Office Office:
  

  https://DL.dropboxusercontent.com/u/84237067/kleinzugross.PNG

  Large size of small office desktop:

  https://DL.dropboxusercontent.com/u/84237067/grosszuklein.PNG

  Hope you understand me, my English for this specific part is not perfect it.

  Greetings

  Marcel

  I checked out the site but don't see any white space on the page with large screens, I think that you have already solved the problem?

  Thank you

  Sanjit

• Publication to HTML problems

  I have problems, a demonstration of HTML editing software.  The project works well when it is played in the file cptx, but when it is published, the project has breaks between some slides and some of the audio has been corrupted.  I already tried to publish a swf file, which, in my experience, has had even more problems during the publication.  I also tried selecting "force re - publish all slides", which does not seem to do anything.  I don't know what is the evolutionary "html content" option

  I also tried to change the slide transitions to "no transition" that did not help either.

  Does anyone have any suggestions?

  Thank you, Kim

  Hi Kim,

  Welcome to the Adobe Forums!

  Could please tell me the exact version of Adobe Captivate you use (see help > about Adobe Captivate)?

  Could you please check the chronology of these slides if they have any clickbox or any button or any other interactive object, which causes them to pause.

  Go to Edition > Prefrences > SWF size and quality and uncheck compression project Advacend and compress the SWF and republish again.

  Thank you

• Publication with CreateJS problems

  I installed Adobe CS6/design of Web sites and downloaded and installed the extension for Flash CS6 CreateJS. The problem is, when I post, I just get an empty HTML page. I even downloaded the example of Platypus game, and even without changing anything in the source Flash file, on the publication of course turns into an empty HTML page also.

  Is there something wrong with the installation or something else?

  Hello

  I checked your PNG, looks like you're dependencies Toolkit for CreateJS version 0.3.20, where as the newest is 1.0.417, can you please use the last Toolbox to build the CreateJS.

  Also, I compared the record compiled HTML files and original case, it seems that there are subtle differences between the two of them.

  Highiliting the differences below.

  Compiled clip:

  Source language:

  When I compared to new easel.js (included in your published HTML file) and easeljs - 0.4.1.min.js (inOriginal HTML file included), there many differneces.

  So it seems generated HTML file is corrupted.

  Let me know if it helps.

• Table border problems...

  I'm embarrassed to ask this question, but I can't seem to find the answer to one of my books.

  I have a table of several row defined with borders and there are two problems:

  • When the new line is added to the current row in the table, the border between the two rows is doubled.  BORDER = "1" is fine on the edges; There is just this line dubbed boring between the lines.  I tried BORDER = "1,1,0,1", but that has not worked at all.

  The next roblem I wouldn't have noticed except for the fact that I'm going to put a background color on the lines:

  • When there is no data in the cell in the row, there are no borders.  This leaves a really funky screen - watch, because populated cells have the border, and not uninhabited cells: their border is white!

  Here is the definition of the table:

  < table align = "center".

  border = "1"

  BorderColor = 'blue '.

  cellspacing = "0".

  CellPadding = "2".

  width = "95%" >

  < tr = "lightblue" background

  Color = "black" >

  < td width = "125" >

  #StructData_Line.Common_Label #.

  < table >

  etc., through several cells

  < /tr >

  < /table >

  Any suggestions?

  Hello

  Another thing that surprised me is that CSS apparently can't stand the table on the page of centering?

  He supported by centering the table, you should try something like that.

  (i) create a class in your css like that,

  table.alignCenter {margin-left:auto; margin-right:auto;}
  

  (II) and in your coldfusion page call the defined class (in your)

  Tag)

  The attachment shows the latest version, which still has the double thickness between lines.

  Try adding,

  border: 1px solid black;

  in all your

  ,definitions of class in your CSS file like this,

  table
  {
       border: 1px solid darkblue;
       width: 90%;
       align: center;
       border:1px solid black;
       border-collapse:collapse;
  }
  
  td
  {
      padding: 5px;
      border:1px solid black;
  }
  
  td.td1175
  {
      width: 175px;
      border:1px solid black;
      background: lightblue;
  }
  

  HTH

• Navboar border problem

  Hello
  I've created a navigation bar with the behaviors of overview and click. All the these work very well, with a minor problem. When I actually click the links a 1px dashed border appears around the button. All borders are set to zero, and yet it still happens. It seems to happen in all types of browser with slight variation.
  
  I'm sure it's a simple problem, but I paint a blank on how to solve this problem. Any tips?
  
  Thank you

  Maybe:

  "akgbob" wrote in message
  News:f4ndtc$9gs$1@forums. Macromedia.com...
  > Hello,
  > I have created a navigation bar with rollover and click behaviors. All of these work
  > fine,.
  > with a minor problem. When I actually click the links of a 1px dashed border
  > appears around the button. All borders are set to zero, yet this still
  > happens. It seems to happen in all types of browser with slight variation.
  >
  > I'm sure it's a simple problem, but I paint a blank on how to solve this problem.
  > Any
  > advice?
  >
  > Thank you
  >

• Publication of video problem on Windows Live Movie Maker

  I'm trying to publish my first video on Windows Live Movie Maker, and whenever I try to post it on YouTube or whatever, I get a pop up window that says, "the system cannot find the path specified."

  Is someone can you please tell me how I can help the system to find the path?

  Hi hershey992,

  Have you tried to publish any another video?

  First, you try to copy and paste the file published on another location on the hard disk, and then try to upload to YouTube.

  Music and video files that are protected by the management of digital rights (DRM) cannot be used in Windows Live Movie Maker.

  Try installing codecs and check whether the problem is resolved.

  You can use your favorite search engine to download and install the Codecs.

  For more information about video editing, you can consult the following link:

  http://windowslive.com/connect/post/7ab2d2cd-7d1b-4741-89e8-13be0ed8006a

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• publication on YouTube problems

  When I try to post it on youtube, (captivate) - captivate pocesses the project, but then, I get a window "Please wait...". "that doesn't go away! someone knows why?

  Sometimes it may be a problem with your credentials when you try to post directly from Captivate on YouTube.

  Republish just to MP4 then upload to YouTube sepearately.

• 20141 with several publications on page problem

  Since the update, I am unable to get several compositions to work on the same page. I use the configuration described here: http://www.adobe.com/devnet-docs/edgeanimate/api/current/index.html#multiplecompositions

  For some reason, only the first animation, I give the floor to AdobeEdge.loadComposition load at all. The rest do not load and there is no error message. Here is my configuration file .html:

  <! - execution of adobe Edge - >

  < meta http-equiv = "X-UA-Compatible" content = "IE = Edge" >

  < script type = "text/javascript" charset = "utf-8"src="/_js/edge/edge_includes/edge.5.0.0.min.js" > < / script > "."

  <! - load animations - >

  < style >

  .edgeLoad-EDGE-235976427 {visibility: hidden ;}}

  .edgeLoad-EDGE-124716880 {visibility: hidden ;}}

  .edgeLoad-EDGE-124716881 {visibility: hidden ;}}

  < / style >

  < script >

  AdobeEdge.loadComposition ('/ portable/edge/_js ', 'EDGE-235976427', {})

  scaleToFit: "width",

  centerStage: "horizontal."

  minW: "0."

  maxW: "1010px."

  Width: '671. "

  height: '441 '.

  }, {« dom » : []}, {« dom":[]}) ;

  AdobeEdge.loadComposition ('/ _js/dashboard/about ', 'EDGE-124716880', {})

  scaleToFit: "width",

  centerStage: "horizontal."

  minW: "0."

  maxW: "1010px."

  Width: "1010."

  height: "590".

  }, {« dom » : []}, {« dom":[]}) ;

  AdobeEdge.loadComposition ('/ _js/edge/personalizedcontent ', 'EDGE-124716881', {})

  scaleToFit: "width",

  centerStage: "horizontal."

  minW: "0."

  maxW: "1010px."

  Width: "1010."

  height: "590".

  }, {« dom » : []}, {« dom":[]}) ;

  < /script >

  <! - end of Runtime adobe Edge - >

  < div id = "Stage-laptop" class = "EDGE-235976427" > < / div >

  < div id = "stage-in respect of" class = "EDGE-124716880" > < / div >

  < div id = 'Stage-customize' class = "EDGE-124716881" > < / div >

  I shared a sample @ Dropbox - multipleComps.zip which is created in 20141 CC. You can use it for reference.

  The actual compositions of loading a different folder is now easier. Assuming that your real compositions are under a folder called mycomps, you can replace the call to loadComposition in htmlRoot parameter as follows:

  AdobeEdge.loadComposition ('comp1', 'EDGE-1814210607', {scaleToFit: "none", centerStage: "both", bScaleToParent: true, htmlRoot: "mycomps /"}, {"dom": []}, {"dom" :[]});)

  Let us know if you are still having problems with this.

  DIA-

• Layer duplicated to the new publication?  Weird problem with the duplicate() command.

  So, I'm writing a script that grabs the selected layers and throws them in a new document that corresponds to the original.

  But something strange that happens when I use duplicate several times in a row.  It duplicates my duplicate layers.

  I start with this selection:

  

  But an end to this result in my new doc:

  

  This has me very confused.  I would appreciate someone looking at what I have.

  Thanks for the research.

  Here is the code:

  var FSTdoc = app.activeDocument;

  var curPATH = app.activeDocument.path+'/';

  fullNAME = app.activeDocument.fullName var;

  var ABSOfull = fullNAME.absoluteURI;

  var curPATHstr = String (curPATH);

  var fullNAMEstr = String (fullNAME);

  var theLayers = GetSelectedLayers();

  var HLDRdoc = app.documents.add (FSTdoc.width, FSTdoc.height, FSTdoc.resolution, FSTdoc.name, NewDocumentMode.RGB, FSTdoc.initialFill, FSTdoc.pixelAspectRatio, FSTdoc.bitsPerChannel, FSTdoc.colorProfileName);

  app.activeDocument = FSTdoc;

  LAY1 = theLayers [0] .duplicate (HLDRdoc, ElementPlacement. PLACEATBEGINNING);

  LAY2 = theLayers [1] .duplicate (HLDRdoc, ElementPlacement. PLACEATBEGINNING);

  lay3 = theLayers [2] .duplicate (HLDRdoc, ElementPlacement. PLACEATBEGINNING);

  function to get layers selected by paul m.;

  function GetSelectedLayers() {}

  var A = [];

  var desc11 = new ActionDescriptor();

  var ref9 = new ActionReference();

  Ref9.putClass (stringIDToTypeID ('layerSection'));

  desc11.putReference (charIDToTypeID ('null'), ref9);

  ref10 var = new ActionReference();

  Ref10.putEnumerated (charIDToTypeID ('Lyr'), charIDToTypeID ('Ordn'), charIDToTypeID ('Trgt'));

  desc11.putReference (charIDToTypeID ('From'), ref10);

  Try the lock to stop the script

  try {}

  executeAction (charIDToTypeID ('Mk'), desc11, DialogModes.NO);

  } catch (err) {}

  Alert ("Script will not work on locked layers.");

  throw new Error ("locked layer");

  }

  var gL = activeDocument.activeLayer.layers;

  for (var i = 0; i < gL.length; i ++) {}

  A.push (GL [i]);

  }

  executeAction (charIDToTypeID ('undo'), undefined, DialogModes.NO);

  return A;

  };

  What version of Photoshop are you using? I think the problem is that you have multiple selected layers when you perform step duplicate. With the new version that will be fooled all selected layers. By three not fooled, you are indeed fool all the layers selected three times.

  I think you should do that one step of dupe or change the layer selection to a single layer after layer selected and before step of dupe.