Similar Questions

• Mode of double chassis with a C8484 of Hamamatsu-05 and a PCI-1426

  Hello

  I use a hamamatsu camera CCD C8484-05 (http://sales.hamamatsu.com/en/products/system-division/machine-vision/part-c8484-05.php), with a PCI-1426.

  Despite the site NOR say they are compatible, Hamamatsu, tell me that the camera is compatible only with the 1426 to use drivers OR and not the vi Hamamatsu. (http://sales.hamamatsu.com/index.php?id=13200492&language=1&)

  I find the file .icd for C8484-05 on the Web site of NOR, and using IMAQ, I can control most of the settings using the camera fixed attribute vi.

  However, it doesn't seem to be an option to set the mode of double exposure for PIV (i.e. 2 exposure Framework 2 by using double buffering)

  I have to do it manually by using the low-level buffer commands? For a previous camera (IDT X 3), I was able to select this option in their provided VI.

  If so, could you point me in the direction of some good tutorials for using tampons?

  In addition, there is an easy way to get all the options without copying the text in each menu MAX and using several structures of matter?

  Kind regards

  Joe Sherwood

  Find attached the modified version of the. CIM file for this device (C8484 - 05 c). I saved as a txt to allow download the Forum of nor. Simply change .txt to .icd and place in > National Instruments\NI-IMAQ\Data

  This allows dual-mode frame/PIV using "quick repeat mode also affecting all standard features. The polarity of command is defined positive and the first exhibition is 4.5us, while the second is 81.7ms (without binning)

  I hope it's useful.

  Concerning

  Joe

• Acquisition of images using PCI-1426 and Camera Link Camera

  Hello

  I am writing a program to capture images of a Camera Link camera via the PCI 1426 acquisition card in LabVIEW. The problem that I am facing is that I am unable to find the correct controls in the functions palette to start the image capture. Could someone tell me please how much control I'm supposed to use?

  I've worked on similar request sometimes back, I used IEEE 1394 camera, so once I found the correct block diagram controls I should be able to go from there.

  Thanks in advance,

  Sandeep

  Hello Kristen,

  Thanks for the suggestion. I was able to solve this problem. I think that was what was causing the problem I have LabVIEW 8.6 installed on my system and he had the Vision Acquisition System (VAS) 8.5.1. But, once I installed VAS 8.6 I saw the IMAQ in the functions palette.

  I'm guessing that LabVIEW 8.6 does not recognize the toolboxes of previous versions.

  Sandeep

• GPS with pci-1426

  Hello

  I do Imaging NI PCI-1426. I wrote a program that makes the acquisition of the images which works very well. My next requirement is to get the time GPS when the image is captured. I only know that PCI 1426 has two ports to this subject (one is used by the camera).

  I would like to know how I can get the time GPS using a GPS receiver and the second port of avaialable.

  Thank you best regards &,.

  Sandeep

  Hi Sandeep,

  You can trigger the acquisition off the Board of 1426 using digital i/o connectors on the card.  You can simply send a high digital logic when an image is acquired to the GPS.  Of course, again, everything depends on what kind of entry your GPS device will accept as a trigger.   If she can accept a digital signal, TTL, you'll be fine.  If this isn't the case, you can deal with a conversion between the office and the GPS device.

  As far as I know, you should not need any special tools to interact with a GPS device boxes.  A GPS Toolbox exists for LabVIEW, but looks like the things you try to do not require it.

• Problem with PCI-4065

  Nice day

  Install dmm multimeter 3.0.6f1 version and when I install PCI-4060 and PCI-4065, max (measurement & automation explorer) detect PCI-4060, but PCI-4065, before this failure had not

  Thomas, Jared thank you for for your support!

  Ago corregi el problema... lo that achieve fue than baje ultima version of NI-DAQ (NI DAQ 9.7.0) the instale, reset the computadora y al iniciar shelter MAX y ago detecta las tarjetas PCI-4065...

  SALUDOS!

• iMac no arranca

  Hola, tengo a imac 27 "Core i5 Intel con cuatro nucleos has 3, 1 mhz, 2011 con tarjeta grafica Radeon 6970 M, Pronto al trabajar en photoshop is empezo a apagar the pantalla, luego actualice a mac osx sierra y al iniciar the pantalla sale verde, is load the bar until the mitad y vuelve a eternamente reset:

  • The 1340s las tarjetas memoria y no hubo cambio any.

  • The pram Resetee y tampoco.

  • Yo desde web iniciar no is conecta aun por ethernet

  • Removed el HD, lo formatee e I made una instalacion limpia OSX Sierra y tampoco hubo cambio any,.

  • No el cambio al try iniciar modo a prueba fallos o desde hay do disco compacto original del equipo.

  
  

  Any idea of what this can be? Lei as este equipo tapeworm a reminder por tarjeta radeon, lamentablemente gracias me cuatro meses después of the date of cierre, pero no se if will Relación, are that describe the pantalla negra o lines, no del ordenador reinicio.  I hope I can help, thanks.

  Hello! Gracias por publicar in las Soporte communities of the Apple. Hemos lanzado una nueva Comunidad of Apple support in Spanish. If you interesa participar, registrate, encuentra una respuesta o publica una pregunta sober los productos y servicios of Apple that mas you interesen. Haz click in este enlace para el sitio en Español visit.

• (table of filling with data series) want table con datos serial

  Hola todos

  Tengo el siguiente problema put los datos back sensores fijado por el deseo series in a table, cada envio una palabra clave recibo 10 siguiente manera, ahora 0224,1023 datos are separo el chain y los convierto en numericos. El problema radica in than recibo los datos y los coloco en el table pero cuando cuando recibo otros 10 mas put in el table continuando siguiente linea desde los datos, lo what I need are my mantenga el table con los datos anteriores y cuando otros 10 reciba to borre el table y nuevo in the linea comienze 0

  in the first image is ve como's van while el pero Necesito UN Québec table me quédé como in the segunda vez as reciba los nuevos datos cada imagen

  the thank su ayuda is not to do

  Hello everyone

  I have the following problem will place two data received by sensors series in a table, each sending a key word to receive 10 facts, 0224.1023 is now following, I separate the string and turn them into digital. the problem is that I recover data and place it in the table but when when I receive another 10 data but their place in pursuit of the next line, what I need is to keep my table with previous data and when you get the other 10, the table and repeat is disabled on line 0

  in the first picture looks like they fill the table, but I need to keep me and the second image whenever you receive new data

  

  Hola aleramir

  You cuento that no me sirvio por ese lado pero prevalence hacerlo the siguiente forma y works exelente

  despues voy activar el boton don't con el programa no manual, igual manera you thank you answer

  

• How findout/control rate of image capture?

  Hello

  I built a vi (adapted from "sequence and save in AVI.vi") to capture images and save them. I can specify the number of images that I am capture, but I can't specify the speed at which images are being captured, since there is no option in «IMAQ Sequence.vi»

  (1) how to find the speed at which my program captures images?

  (2) how can I control the capture rate without having to use writeto AVI function (vi)?

  The reason I can not use the ' sequence and save in AVI.vi "is that it is compatible only with the 8-bit and RGB images, while the device I use produces an image I16. And I can't convert it into 8-bit image, because I can't find the "IMAQ Cast Image.vi" function even after installation of 8,6 VDM (my version of labview 8.6 and IMAQ is 4.0). Vision.txt contains a list of programs OR installed on my machine.

  I use a PCI 1426 framegrabber and Imperix "X2M30HL" camera (specs say that its rate is 33) and I'm running on Windows XP.

  Y at - it an option for me to capture images to rate high (close to offered by the camera) other than its use "IMAQ Sequence.vi.

  Thank you

  Sandeep

  Hi Sandeep,

  I would like to repair or reinstall VDM at this stage.  It is probably a problem with the installation, especially if you have LabVIEW recently upgraded.  Please let me know if this does not resolve the issue.

• Save pictures to the ENVI format

  Hello

  I do the image acquisition using a PCI 1426 acquisition card and the requirement, I have save the images to the ENVI format. When I searched for information on the ENVI format I found this link: http://groups.google.com/group/comp.lang.idl-pvwave/browse_thread/thread/e29deda284a727f1?pli=1

  Apparently, there is a header file in which the information of the captured image are registered. The device that I use is a line scan camera and capture energy strips any (not exactly what it is). What I need to know is, can I save the images captured in ENVI format? If I can, how can I write the header for the file information?

  Thank you

  Sandeep

  I think that I finally understand how to work with / create files Environment. In my application, I have a camera online scan that will scan/capture only a row of pixels in an image. It's like a normal camera, but the resolution of the image in terms of the complete image is an X by 1. In my case 800 X 1. The camera returns actually a 800 X 270 resolution image, but what represents the 270 is 270 bands of energy that the camera caught for that row of pixels. If the camera has captured 270 each resolution 800 X 1-band information.

  Now what happens after this is the case, the camera pivots from one (very small) angle and captures an another 270 information strips. How many groups is captured.

  Suppose that I captured 270 band information in 300 different positions of the camera. That is to say an image of 800 X 270, turn some angle to take another image of 800 X 270, turn a few angle etc... 300 times.

  Now, the ENVI header file should have the information

  Description Environment = {created ENVI file [3/17/20093:47 PM]}

  Samples = 800

  Lines = 300

  Bands = 270

  header offset = 0

  file type = standard Environment

  data type = 12

  Interleave = bil

  sensor type = unknown

  byte order = 0

  wavelength units = unknown

  Allows to observe some important fields from the list above

  (a) samples - it's the horizontal resolution of the image is captured. (800 in the resolution of 800 X 270)

  (b) lines - this represents the number of frames you available for capture. By lines of what this means is the number of lines (rows) that will be present in the final image that we will build with all the information you entered.

  (c) bands - this represents the number of bands of energy that the camera captures in each image, in this example it's 270 (the second part of the 800 X 270).

  (d) the offset of the header - this indicates if there is no header information before each image information.

  (e) type of file - standard Environment (explicit)

  (f) type of data - how many bits is taken to represent each pixel. My camera takes 12 bits to represent each pixel.

  (g) interleave - this indicates how the data is organized in the binary file. Certain amount of explanation is needed here, because there is confusion.

  Any ENVI file is actually two files, the header which has the above information and the second is the information of the image that is defined in the header file. So, the header file is like a map of the information of the image (in binary). Is what I'm doing, I capture a series of images and write a binary file. Thus, the first line in the binary file will be the first band of the first image, which is the first line of the 1st image of band. The second row will be the second strip of the first image that is in the 1st row of the second image of the band. The 270th line is the 270th band of the first image, which is the first line of the 270th band image. 271st ranked is the first group of the second captured image will be the second line of the 1st image of band etc.

  Therefore, we receive 270 (number of bands) resolution images 800 X 300 of 300 images in resolution 800 X 270. Each of the final pictures will be a bunch of information value. A row of PIX of each of the 300 images form a final image.

  This link has a lot more information about Environmental format images http://groups.google.com/group/comp.lang.idl-pvwave/browse_thread/thread/e29deda284a727f1

  There are many more parameters as those explained above, but the above are sufficient to start.

• CVI 8.1 Distribution BUG

  CVI 8.1

  Dev 8.2.1 vision module

  Duration of the vision

  I developed an application that uses the VDM to display the data of the material non-IMAQ.

  A customer wants a copy of my application.

  I bought the Vision run-time license to copy it.

  There is a problem it's with the option of distribution under this rev of the CVI.

  When I change the distribution and go the tab "Drivers & components" there is NO option

  to add the duration of the Vision, while, on a system where I installed IMAQ, it correctly

  presents itself. IMAQ machine has a framegrabber PCI-1426. But I can't create distribution

  It because of a message "unknown error occurred" popup that kills the process.

  I installed CVI and VDM (no IMAQ) on another computer temporarily to create the version but

  It does not list the VDM.

  Any ideas or is at - it another way to create a CVI with VDM distribution?

  Thanx.

  -Chet

  This knowledge base explains how to deploy the runtime of Vision without installing IMAQ. It is written for LabVIEW users, but also applies to the CVI. The original versions of the Vision RTE 8.x installers did not support redistribution by CVI or LabVIEW distribution builders. The links in the article base knowledge to the Vision with this added support RTEs 8.x updates.

  Regarding the "Unknown error" popup, if you can still run into it, could you please post a log of debugging for us to consider? To create one, bring up the distribution Editor dialog box, select the control tab (the dotted rectangle should be on one of the labels in the tab), press ctrl + shift + L, and then build your distribution. The output log is located in C:\Documents and Settings\\Local Settings\Temp\distBuildDbg.txt. We could then try to determine if this is a bug that has been fixed previously.

  A. Mert

  National Instruments

• Problema al add UN nodo adicional al Cluster Windows Server 2012 con VMware Workstation 9 en

  Hola Buenas,

  Ante todo decir este are a Québec fallo he revisado y las responses in different los don't post han well para help me, good os.

  El caso are that I have 2 servers DELL PowerEdge R420 fisicos identicos, cada uno con ellos 3 VMs sober instaladas VMware Workstation 9. The first virtual machine are an image of Kerio control, a second virtual machine to Windows Server 2012 con dominio Controladora, is the third VM con WS2012're donde quiero crear el cluster con dominio usuario. ESTOS servidores knew vez esta una cabina data via iSCSI connected.

  Add tambien when performed the tests of validation led Cluster, todo lo tengo OK. El caso are so creo el cluster con el Nodo 1 y 2 Nodo (sugar Québec cada uno fisica Máquina distinta ellos y bajo mismo Dominio) me error UN da has the el crear hora cluster. In cambio, if creo el Cluster con este nodos if any to crea, pero el fallo viene a hora of connect UN nodo adicional (ya sea o 1 Nodo Nodo 2). Este fallo viene cuando el nodo TR checks are completely funcional in el Cluster, is is "pensando" y da fallo por tiempo sold.

  He revisado problemas similar y he visto that el antivirus can be una causa e caso no lo're are only aun no he wont any AV... There comprobado red devices (utilizamos 4, 2 iSCSI, 1 red LAN y otra heart rate), he desactivado los red el protocolo IPv6 devices, he probado connect los nodos con el Kerio Offline, el desactivado firewall of Windows, exportar components del registro TCPIP6, capture las conexiones iSCSI...

  El cluster is as en Máquinas Office instalacion del WS2012 y is ha hecho manera person, no mediante VMWare del injerto.

  Una nueva prueba as hoy he ha hecho sido realize el cluster 2 maquinas office in una misma Máquina física y to ha s con exito, pero cuando intento realize el 2 nodos cluster (2 machines virtual cada una fisica diferente Máquinas) cuando me da el error. Esto deduzco raiz Quebec are a VMware o red, no lo o problema se, he probado use tan solo 1 switch (infrastructure utilizaria 2), changing IPs, pero igual sigo as can be? contacts? Alguna especifica VMware config?

  El caso're llevo several days ago that don't con este problema y no se a what can deber, agradeceria muchisimo the the comunidad ayuda.

  MUCHAS Gracias

  Buenas

  Between 2 workstation are posible realize ese tipo configs of forma limpia.

  El problema're (sniffer lo of UN pones veras TR), Los nodos assume ip-spoofing y arp spoofing cuando salen por tarjeta of Red led host.

  Para hacer eso as pides, deberias workstation pasar an esxi.

  Saludos

• the NI PCI-6023E tarjeta not me appears en max

  The NI PCI -6023E no abilitada en appears don't MAX y cuando quiero instalar el driver me pide a 2 CD el cual no tengo, bajo el driver Windows 7 USO y cuando el solo este link CD1 appears

  
  

  http://www.NI.com/download/NI-DAQmx-7.3/369/en/

  
  

  Espero para me help can achieve instalar con exito el driver

  
  

  Gracias

  Hola;

  Primero that nada; You version of LabVIEW no esta soportada para Windows 7; Sino hasta 2009 sp1 version. ES posible that LabVIEW no h. esperas como, por lo you recomendaria fornuis you version.

  Compatibility of the versions of Windows with LabVIEW

  Version mas actual than puedes instalar DAQmx are the LV 8.5 9.3 para Windows 7 y puedes descargar Aquí.

  EXITO

• Buenos dias quiero change el pais MI cuenta y no puedo hacerlo por as tengo UN saldo $ 0.92, no puedo charged mi tarjeta credito there're otro País

  Hola,

  My Itunes account are [email protected], esta radicada in EEUU, the credito carga hago en tarjetas prepagas of iTunes. Quiero change of pais a Argentina y put mi tarjeta credito Argentina, pero tengo UN saldo $ 0.92 como no puedo change of pais. No tengo forma gastarlo.

  Me puden help

  Haga click aqui y personal al of the iTunes para poner tienda inquire a cero el saldo cuenta su.

  (142487)

• H P 1426: network controller and the controller of Communication Simple PCI driver does not install

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
  PCI\VEN_14E4 & DEV_4727 & CC_028000
  PCI\VEN_14E4 & DEV_4727 & CC_0280

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1426103C & REV_06
  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1426103C
  PCI\VEN_8086 & DEV_3B64 & CC_078000
  PCI\VEN_8086 & DEV_3B64 & CC_0780

  PLS help me to find the driver for my hp laptop.

  I tried to install the drivers but still has a yellow exclamation mark in Device Manager.

  Thank you.

  Hello

  Please try:

  Broadcom Wireless LAN Driver for Microsoft Windows
  
  Driver Intel Management Engine Interface (MEI) the 4th:

  Installing a second before the premiere.

  Kind regards.

• Do not I already buy imagenes con tarjeta are al fill todos los datos cuando llego al pais toma me por estadounidense.y in mi perfil tengo los datos well.

  Not me already buy imagenes con tarjeta ago that fill todos los datos cuando llego al has the pais casilla not me already poner España y ciudad.¿como I can change the config cuando mi ID esta correcto?.

  The country associated with your Adobe ID is in the United States.  Please use the following workaround to change the country:

  Change the country associated with your Adobe ID

  Thank you

  Bev