punch in the click causes

Similar Questions

• Do a right mouse click on the name of the file causes Windows Explorer stop.

  Do a right mouse click on the name of the file causes Windows Explorer stop.

  The problem is sometimes caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

  When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find it easier to disable them all and then reactivate (green area) one at a time and try to explore until the culprit is found.

• I use a lot my daily life of the computer. I hear CLICKING noises that are not caused by me! Who and where are the clicks noises coming from? Is there a ROOTKIT, someone somewhere romoting access my internet service?

  Is there a Rootkit, or someone somewhere romoting access my internet service?  I use my computer for several hours every day.

  This year I went through a CRASH my system in September due to my memory stick in my digital camera INFECT my computer.  I bought a new computer that's how it was.  I'm also a MODEL all CIS although I am learning.  Since then, I've downloaded the AMOUNTS of VIRUS protection.  Of course, I didn't know it was my stick of memory from my digital camera which has infected my computer, I only understood what a month ago.  So, you guessed it, even my brand new computer became infected soon enough.  I recently did a RESTORE on it, which has erased everything.

  My point is, I had about 4 people from remote access my computer to try to resolve the various problems with it several times last year.  These people are found in various places: Argentina, India, Phillippians.  I found it interesting.  Whenever they take control of my computer from their remote location.  Once the session is completed, they finished their access.

  Why what I hear clicking then I use my computer?  As I wrote this, I heard it about five times.  What is it?  Why gives me the feeling that someone is using my internet.  Talk about paranoia, makes me think that they can get in my email when I look at my bank account etc.  Is there a possibility that this actually happens or not?

  My son has a laptop that he uses a lot with the internet service that I use.  His laptop using WI - FI.  It uses the X - Box live wi - fi.  These things are going at the same time while I use my internet connection.  Would this be causing clicks?  I would like to know if there is violation of privacy occurring and/or and "OUT OF BOUNDS" type of question, where someone from a remote location using my Comcast service internet and maybe even can see confidential things on my personal login.

  Thank you, WG

  I used my mouse that you asked and he makes no noise whatsoever (it's a laser wireless mouse) - well it makes a rattling noise when I click with the right button or left mouse on an icon as it should, but nothing outstanding at all - is the click made by the mouse when you click on an icon or a hyperlink that you speak?  And you say he doesn't mouse, but from somewhere inside the computer?

  Someone smart enough to gain access to your system to be able to do the things you're afraid of that happening is smart enough to make sure that the computer does not have a noise when it occurs to give the fact that it happens.  In addition, access would be through the network connection so let's do a test.  Remove the connection from the system (I mean disconnect the cable or ethernet connection or remove the wireless card or go to network connections and sharing and disable every single network, you will find (don'tdelete - just disable their) or better yet, just remove the connection of the moden provided by the ISP, so there is NO WAY) a connection could get through.  Then see if clicks continues.  If so, it has antyhing to come with your internet connection or a pirate in your accounts. If it does not go far, it is possible that some network devices is originally of the problem (or that you are currently connected to a web site that generates the rattling noise, but I seriously doubt that this is a sign that everybody won that kind of access to your system (even if it could be malware as I mentioned earlier).

  I honestly have no clue what inside the computer could cause this noise that often and that constantly. It is not a problem of software for me.  I still think you should try the suggestions I made in my previous post (especially the search for malware and do a clean boot).

  If you this concerned and you have tried everything that has been recommended, I stick a reputable computer repair shop and ask them to check it out. If it occurs when they use the computer, they should be able to find the source even if they remove all to do.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Right click in the shell of the BONE causes the crash of Explorer and restart

  I am one of those who have a problem with Explorer crashing when I right click in the Win 7 OS shell.

  When I right click on an element (for example, file, folder, library, shortcut in the start menu,...) explore hangs frequently... showing a message box and then finally by displaying a different message (with a progress bar) that explore restarting.  The issue is sporadic.  It happens regularly during a certain period, and then it may not happen again for a little while.

  The issue started on my 64-bit Win 7 Pro system after a clean installed.  I had also installed other software (end versions on the web... not old code).  So, I started uninstalling things... and also used ShellExView disable each contextual menu non-Microsoft extension... and it happened again.

  So, I rebuilt my system again... from scratch... clean install... and then settle with just three things:

  (1) I hosted Windows Update
  (2) I added the latest version of Avast antivirus (free)
  (3) I installed the latest version of Firefox

  .. .and boom... Explorer crashed again in the same way.

  Others say that this problem occurring on a vanilla full Win 7 installation with nothing else installed... which none of the third-party drivers.  I met dozens of people have reported the problem.  Here are a few recent reports:

  http://www.SevenForums.com/crashes-debugging/34826-right-click-Desktop-causing-Explorer-exe-crash.html
  http://www.SevenForums.com/performance-maintenance/19169-right-click-causes-Explorer-crash-fix.html
  http://www.SevenForums.com/crashes-debugging/22061-Windows-Explorer-crashing-right-click-under-x64-RTM.html

  Several people have analyzed using various tools of profiling and dump and all signs point to the corruption of the heap... and the data looks as Explorer retires upon itself not a third-party component doing... but we don't have the source code to find the specific problem.

  Obviously, there is a problem... and we would be grateful, at least, something that looks like 'we are aware of the problem and are addressing it. "

  Thank you.

  see you soon,
  Steve

  Unfortunately the guys I dropped and reloaded but my apps will be the same in the list but I will not load anything on this machine, but the basic principles until I am sure that the problem has disappeared.

  For now, I have this installed

  all the default drivers but a newer version of the Intel AHCI drivers

  Opera
  Firefox
  Flash
  Java
  Kaspersky Internet Security
  Trillian

  That's all I'll keep until this thing is running at least 3 days or more without an Explorer of the accident. If it crashes again as before, I will go back to Vista and don't move not not for Win7 until Service Pack 1 and I build my next machine. I can't spend every day on this and I don't want to. If it comes to Windows (which I strongly think that it is after all that) so it's quite sad, it's something like that got behind testers.

  I wonder if the 32-bit version would be more reliable and it's just a x 64 issue?

  I'll keep posted guys... Thank you

• How can I disable the click Hover funtion

  How can I disable the click Hover funtion? It is so annoying

  moving the cursor on the screen sometimes opens a multitude of programs

  or if I move the mouse to a position he clicked, without pressing a key

  also, it highlights or selects the text without me wanting that he selected (entire pages?)

  Hello

  ·        Did you change to the computer?

  ·        Which the operation is installed on your computer?

  ·        What is the number and model of the mouse?

  ·        Is it a mouse USB or PS2 Mouse?

  Method 1: Put the computer to boot and check if any third-party application is causing the problem:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I suggest you to update the mouse driver and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Troubleshoot issues with the mouse button or scroll the parameters

  http://support.Microsoft.com/kb/303091

  Note: skip the section applies to .

  Method 4: Change your mouse settings

  For Windows XP: http://Windows.Microsoft.com/en-us/Windows-XP/help/change-mouse-settings

  For Vista: http://windows.microsoft.com/en-US/windows-vista/Change-mouse-settings

  Windows 7: http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

• Why should I keep the click mouse to keep typing continue offshore assistance

  Keep going off will not be on when you type, have to keep clicking the mouse

  Hi Tweetysweet2,

  1. What do you mean when you say ' keep the click mouse to keep typing "? Is it the cursor jumps around on the page when you type?

  2. using a laptop or desktop?

  3. this happens with all programs?

  4. have you made a recent software or hardware changes to the system?

  Method 1:

  If the cursor jumps constantly as you type, then make sure that the mouse pointer is set to hide when you type. Here are the steps:

  a. click Start, click Control Panel, click Printers and other devicesand then click mouse.

  b. on the Pointer Options tab, under visibility, select the Hide pointer while typing check box.

  For more information, see the article:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/win_pointer_hide.mspx?mfr=true

  Method 2:

  You can refer to the computer or the device manufacturer's Web site and try to install the latest version of the drivers for the Mouse/touchpad:

  For more information, see the article:

  How to manage devices in Windows XP

  Method 3:

  If the problem persists, try to perform a clean boot, and then check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• How to analyze a crash dump to determine the root cause of the dump?

  Hello, I have a desktop computer that breaks down frequently.  EventViewer showed that blue screens keep on occurring.  We suspect it is a new software that has been installed and have a few dumps, but would appreciate any advice on playing the dumps to make sense.  Thank you
  \|/

  Hello

  BlueScreenView execution and it displays the information in a very readable format.
  is simple and fast. BlueScreenView is not as accurate for the specific CAUSE
  WinDBG however it brings a wealth of information - and it's still very
  simple to use,

  BlueScreenView - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  When you click on each top of the article Bug_Check the lower part displays the
  Names of files containing more information. Sometimes, the CAUSE is the real cause
  but more likely, it's what has been assigned (or pushed to the fault) by something
  on the other. Check commands/options menus, and right-click
  While in BlueScreenView.

  How read partial memory dump files that Windows creates for debugging
  http://support.Microsoft.com/kb/315263/en-us?p=1

  Check this thread for more information using BlueScreenView, MyEventViewer and
  other methods of troubleshooting BlueScreens - answers top 3 (+ 1 more). This
  Convenience store is for Windows 7, however, she also works for XP and Visa.
  the main differences are using RUN instead of start - search (for XP).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ------------------------------------------------------------

  WinDBG is a more complete debugging tool.

  How to read the memory dump file that is created by Windows if an incident occurs
  http://support.Microsoft.com/kb/315263/en-us

  Using the Microsoft Windows Debugger (WinDbg)
  http://kipirvine.com/ASM/4th/debug/WinDbg/index.htm

  WinDbg
  http://en.Wikipedia.org/wiki/WinDbg

  Download and install the debugging tools for Windows (use the SDK)
  http://www.Microsoft.com/whdc/devtools/debugging/default.mspx

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• The problems causing Windows Update

  I woke up this morning and my computer did an update all night and it turned off and restarted.  It was missing some things and I do not have access to some videos and such that I saved it.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  This is the Vista operating system repair and recovery Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  You will receive the best help here.

  See you soon.

  Mick Murphy - Microsoft partner

• Make a right click causes Explorer to restart

  Make a right click causes Explorer to restart

  Signature of the problem:
  Problem event name: BEX64
  Application name: explorer.exe
  Application version: 6.1.7600.16450
  Application timestamp: 4aebab8d
  Fault Module name: CryptoProvider.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 53f47bcd
  Exception offset: 000007fef75d39e8
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1033
  Information additional 1:2264
  More information 2: 2264db07e74365624c50317d7b856ae9
  Additional information 3: 64 6
  Additional information 4: 64d6201a32f49bc6d38d88890a8ad0b8

  I'd appreciate any help. What is that encryption thing? Summer make attempts to quarantine with BITDEFENDER

  What is that encryption thing? Summer make attempts to quarantine with BITDEFENDER

  There are some suggestions in the following link on the withdrawal of the C:\ProgramData\Microsoft\Crypto\RSA64 file which must contain the 'fault Module' CryptoProvider.dll:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/explorerexe-crashing-every-few-seconds/47286ff0-f267-4AC4-87f8-bc5d0ad1ff5d

• TextInput changes to the text during the click on

  Hi all.

  I have a text entry that contains the text 'name '.  What I want to do, is when it is clicked it gets rid of this text.  I can do it this way

  < s:TextInput x = "10" y = "291" width = "265" textDecoration = "none" text = "Name" id = "txt_name" click = "" txt_name.text = "" fontStyle = "italic" / > "

  Simply change the text value to "" on the click attribute.

  However, this causes problems because if you click it once that he get rid of 'Name' and you type in something, if you clicked on it again, it would be to get rid of what you typed in.

  If I'm on this simple function

  protected function commentnametext (): void
  {
  If (txt_name2.text is "Name")
  {
  txt_name2. Text == ";
  }
  on the other
  { }
  }

  < s:TextInput x = "10" y = "321" width = "265" textDecoration = "none" text = "Name" id = "txt_name2" click = "commentnametext ()" fontStyle = "italic" / > "

  However, when I click on the textarea component it dosent seem to run the function, changing text dosent.  No idea why its not working?

  Your function is false

  protected function commentnametext (): void
  {
  If (txt_name2.text is "Name")
  {
                    txt_name2.text == ";  -You must write here txt_name2.text = "; instead of 2 == writing only 1 =
  }
  on the other
  { }
  }

  If this post answers your question or assistance, please mark it as such.

• The clicks of mouse and trackpad... do nothing.

  MacBook Air under the age of two months.

  Symptom: pointer moves on the screen I use the trackpad, noise of rattling and sensation is full, but the click does nothing in the system.  I can't click anything on the screen, can not open or close anything. Connect a wired USB mouse, same thing! -move the pointer, occurs, clicking noise but no action on the screen (or OS environment) after the clicks.

  Then... eh.

  SMC Reset works temporarily, but the same symptoms returned.

  Some responses have been that there has been a spill, crumbs or a chassis folded.

  Crumbs?  -Gosh, maybe.  Frame bent or such?

  But then WHY would a SMC restore temporarily solve the problem, as it does in my case?

  If the problem was physical (trackpad inhibited by crumbs or bent), then LANDAU or SMC should not have any effect, in my mind.

  In addition, if it's a problem of trackpad, why the same thing would happen with a usb mouse?

  Anyway, I hate just my experience on my MacBook Air two months old now.  I know, give it to Apple and they have to him.  But, dang, the problem could be temporarily fixed, so... .it, for those who know really not on motherboards, firmware or other think about it?

  Please read If your pointer is nervous when you use a trackpad, Magic Trackpad, Magic Mouse - Apple Support.

  In addition, if it's a problem of trackpad, why the same thing would happen with a usb mouse?

  The following can help you pinpoint the problem. Please refer to OS X El Capitan: mouse and Trackpad pane accessibility preferences.

  To ignore the trackpad while using the mouse, choose  (Apple menu) > System Preferences > accessibility > mouse and Trackpad. Select ignore built-in trackpad when mouse or a trackpad wireless is present.

  Determine if the adjustment changes the behavior you know.

• Keynote can not select 'start the movie at the click.

  Hello

  I joined a clip on a slide, and it is read right after that I click to go to slide on the previous slide. I don't put any transition to the previous, current or next slide.

  When I click to go to the slide with integrated clip, I want to show the slide without playing the built-in clip, and then have the video game when I click once more. I can see the option "start a film when the click on" at the bottom of the Format / box of film in the Inspector, but it is grayed out so I can't select it.

  What can I do to fix this?

  Thank you

  Remove the slide containing the video, and then drag the video file directly on the browser panel to replace again.

  If it does not, add the video file to a new presentation, and then add the rest of the original.

• Remote works except the click to start anything.

  Remote works except the click to start. By side-scan works well, nothing will launch.

  relying on the touch screen has no effect at all then its likely the Microswitch under the Panel who died

• disable the click to activate functionality?

  Win7, Firefox 30. I followed the instructions to disable the * click here to activate * feature and appears as * wrong * about: config... but it is still asking me to click to activate. What Miss me?

  You can set the default behavior for each plugin on Firefox/tools > Modules > Plugins page.

  • https://support.Mozilla.org/KB/why-do-i-have-click-Activate-plugins
  • http://KB.mozillazine.org/Issues_related_to_plugins#Click_to_Play

• How to disable the "click to play" Bar warning

  Hello

  I would like to know how to change the behavior of the "Click to play" warning, or how turn it off. I have Firefox 27 (beta update channel, the version prior to RC1).
  I configured the plugin Flash to "ask every time", and "plugins.click_to_play" is set to true by default.

  Before you install the latest update, there was an alert popup at the top left, next to the address bar (with the icon "brick lego").

  Now, instead, a new bar is inserted directly in the content of the web pages (asking if I want to allow 'Adoble Flash' in the page). The result is extremely annoying, because all the content of the Web page is moved to the bottom each time to make room for the toolbar warning...

  How can I remove the warning bar? I tried to put "plugins.click_to_play" false and I have not noticed any change in the behavior of the browser.

  Thank you

  Hello Stormvision, you can use the https://addons.mozilla.org/firefox/addon/hide-plugin-notifications/ by bsmedberg mozilla addon in order to hide the information bar.