PUPPY. Bug PC mightymax removal

This is a crazy bug that pretends to be a security tool that asks for money... This is all a scam.

Now I tried 24 hours to remove it.

So far, no luck. Have you tried the Super anti Spyware, Malwarebytes Antimalwear, McAfee, and Avista.

Still no luck and I am now running a full scan with Microsoft Security Scanner for the second time.

Any ideas on how to get rid of the thing he does run my laptop very slowly.

My system is Vista and I use Google Chrome as my browser.

This is a crazy bug that pretends to be a security tool that asks for money... This is all a scam.

Now I tried 24 hours to remove it.

So far, no luck. Have you tried the Super anti Spyware, Malwarebytes Antimalwear, McAfee, and Avista.

Still no luck and I am now running a full scan with Microsoft Security Scanner for the second time.

Any ideas on how to get rid of the thing he does run my laptop very slowly.

My system is Vista and I use Google Chrome as my browser.

In truth, with all the baggage that will probably charge and questions various permanent... Restore the system to the default settings after you have confirmed that your backups are also common that you can get and you have all your keys of multimedia product / facility and series numbers, with that you must rebuild...

Then, after you get everything restored, updated, reinstalled, updated again... Restoring your data.

Finally... Get a kit in AntiVirus and antimalware decent. Got to the "protection packages".

Tags: Windows

Similar Questions

[bug or feature] remove relationship result empty index

Hello
After the removal of a 1:1 ratio in the logic model and engineer that this deletion of relational model, the relationship is on relational model. But the index in the target remains and the index is empty. The generation of DDL displays the errors later.
Is this a feature? Or: How can I remove the relationship without getting the index of vacuum?
(tried with 4.0.3 and 4.1, same results)
before:
After:

Hello

Thank you to let know us the problem - I logged a bug for this.

You can check the 'Analyses of Impact' page to see the dependent objects before the delete operation:

Philippe

BUG (splash screen): remove the Web links on the Launcher is not possible

Press option should be the key orange and then press the icon, you will receive an option to remove the link.

Remove the hierarchy without affecting only not in Smart View

I was wondering if someone was faced with the same question.
We have an online form with all P & L SG & A accounts used for the planning session and we don't want any kind of indentation, and I'd rather flat. So, we used "delete the hierarchy", and it works perfectly in the workspace. But when we opened that in Smart View, it always shows the indentation in the rows.
Is this a bug / it's just normal behavior / is because of the difference in the version for planning and smart view
Planning Version - 11.1.2.2.300
Smart View - 11.1.2.5 version
Concerning
Amarnath
ORACLE | Essbase

This was noted as a Bug 11790086 code: REMOVE the OPTION of HIERARCHY DOES NOT SCREEN IN SMARTVIEW

"If a form uses the hierarchy for a line option or a column, the hierarchical structure always displays when the form is opened in SmartView. The hierarchy option works correctly when the form is opened from the web of planning. »

HTH-
Jasmine

Bugs in Director 11
I used Director 11 for several months. In those days, I found several bugs in director11. These bugs do not have to be removed from this day.
The first bug is Director 11 will stop and give an error message "the path exceeds 255 characters, copy the file in a different directory and try to import from this location." when importing files are more than 255 characters. previous versions do not have this problem.
This second bug is inputing unicode Chinese characters for example is not better supported in the editor of jargon. previous versions do not have this problem.
These bugs give a lot of problems in our work. I sincerely hope these bugs will be removed hungry.

I used Director 11 for several months. In those days, I found several bugs in director11. These bugs do not have to be removed from this day.
The first bug is Director 11 will stop and give an error message "the path exceeds 255 characters, copy the file in a different directory and try to import from this location." when importing files are more than 255 characters. previous versions do not have this problem.
This second bug is inputing unicode Chinese characters for example is not better supported in the editor of jargon. previous versions do not have this problem.
These bugs give a lot of problems in our work. I sincerely hope these bugs will be removed hungry.

htmlText remove all line breaks
In my program, a user can enter any type of text using a RichTextEditor. The entered text has all its illegal xml characters replaced (< with & lt ;) etc.) This string is placed in an xml document. A component is custom, then receives the xml document, converts the html code in its original form and the applicable as the htmlText of a property control of text. This used to work properly. I need string conversions because there are some "metaStrings" which is not replaced according to certain criteria... which is the string {$DATE} would get replaced by the effective date when loading at a later date. As I said, used to work, and I had no problem display of text exactly as the user who created it. Now, for some reason, when I set the htmlText property, all line breaks are removed, of any type. < here > < /li > < li > for fleas. Remains of formatting, has increased the font size, color, etc., but there is no line breaks.

I have my chiseled loading code and the following output:

public static void loadHtmlText(textControl:Text,_textData:XML,_replaceMeta:Boolean_=_false):void
{
trace ("loading text html in a text component, loading", textData);
var html:String = textData.Html.toString ();
trace ("after parsing a string", html);
If (replaceMeta)
{
trace ('replacing');
HTML = html.replace(/\{\$DATE\}/,textData.Date);
Add sequences additional meta here for replacement
}
trace ("after the replacement", html);
textControl.htmlText = html;

textControl.validateNow (); force a commit
trace ("value that was set', textControl.htmlText");
}

and the following output:

text html in a text component loading, loading
< data >
< html > & lt; TEXTFORMAT LEADING = "2" & gt; & lt; P ALIGN = "LEFT" & gt; & lt; FONT FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = "0" KERNING "0" = & gt; Line 1 & lt; / FONT & gt; & lt; /P & gt; & lt; / TEXTFORMAT & gt; & lt; TEXTFORMAT LEADING = "2" & gt; & lt; P ALIGN = "LEFT" & gt; & lt; FONT FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = "0" KERNING "0" = & gt; Line 2 & lt; / FONT & gt; & lt; /P & gt; & lt; / TEXTFORMAT & gt; & lt; TEXTFORMAT LEADING = "2" & gt; & lt; P ALIGN = "LEFT" & gt; & lt; FONT FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = "0" KERNING "0" = & gt; Line 3 & lt; / FONT & gt; & lt; /P & gt; & lt; / TEXTFORMAT & gt; < / Html >
NotSet < date > < / Date >
< / data >

after parsing a string
< TEXTFORMAT LEADING '2' = > line 1 < / POLICE > < / TEXTFORMAT > < TEXTFORMAT LEADING '2' = > line 2 < / FONTS > < / TEXTFORMAT > < TEXTFORMAT LEADING = "2" > < FONTS FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = '0' KERNING '0' = > line 3 < / POLICE > < / TEXTFORMAT >

After replacing
< TEXTFORMAT LEADING '2' = > line 1 < / POLICE > < / TEXTFORMAT > < TEXTFORMAT LEADING '2' = > line 2 < / FONTS > < / TEXTFORMAT > < TEXTFORMAT LEADING = "2" > < FONTS FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = '0' KERNING '0' = > line 3 < / POLICE > < / TEXTFORMAT >
set < TEXTFORMAT LEADING = "2" > line 1Line, 2Line 3 < / POLICE > < / TEXTFORMAT >

Uh, oops, all the strings wordwrapped, makes it impossible to read. There were three blocks adopted in
each of them said line 1 line 2 and line 3, respectively, and each of them must be on its own line.

After forcing the validation of the text control after setting this string, it has that one tag with all the text inside... 2Line 1Line line 3.

Any ideas?

It worked before, I did was move the parameter text in its own function, insead of a function called by the method of my custom component's data provider.

Thanks for the help.
Wow, almost three months later, when my work schedule allows me actually to take over this problem, and I have the solution :-). It turns out, I don't know why, or if same Adobe knows about the bug, but if you have fonts using style sheets for all controls on your application, that is, I have a style statement request where I placed the police then redering text html of the text control is bug, usually just remove all line breaks. Why, I have no idea, he is simply. However, the same bug does not occur in the TextArea component. Still, I don't know why, seems silly to me, but as the solution to this problem, simply create a component TextArea, backgroundAlpha styles set to 0, its borderStyle to 'none', set the editable to false and boom, you have a component of scrolling text, which doesn't render the text html incorrectly.

31 Firefox should run Greasemonkey scripts on POST pages

The update of Firefox 31 broke Greasemonkey 2.1 features. Greasemonkey scripts don't work anymore on the pages that are displayed in the form of a response to a MESSAGE event. Works fine, once again, when I go back to 30 of Firefox.

Steps to follow:
-Install https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/
-Install https://www.eclipse.org/jdt/ui/scripts/jdtbugzilla.user.js
-Go to https://bugs.eclipse.org/bugs/query.cgi?format=advanced
```
   => page is correctly tweaked (e.g. "eclipse bugs" header image removed)
```
-Select some filters (e.g. Target Milestone M1 4.5), and then click Search
```
   => result list is not tweaked (e.g. bug summaries are underlined)
```
The first action of the script is the following, which is not executed on the MESSAGE page:
Console.log ("Running jdtbugzilla.user.js we" + window.location);

Classified https://github.com/greasemonkey/greasemonkey/issues/1977 for this, but the bug might as well be in Firefox. Maybe same question as https://support.mozilla.org/en-US/questions/1012688

With the news of https://github.com/greasemonkey/greasemonkey/issues/1970 , I could write this script to workaround for 31 FF:
https://www.Eclipse.org/JDT/UI/scripts/jdtbugzilla-start.user.js

This model could help others to create workaround for their broken pages:
```
// ==UserScript==
// @name        Remove history.replaceState from buglist.cgi
// @description Removes history.replaceState from buglist.cgi to work around https://github.com/greasemonkey/greasemonkey/issues/1970
// @include     https://your/page*

// @version 1
// @grant       none
// @run-at document-start
// ==/UserScript==
history.replaceState = function(data, title, url) {
	console.log("caught history.replaceState(" + data + ", " + title + ", " + url + ")");
};
```

Operational difference V10: Extra button in the Windows 7 taskbar

After the upgrade to V10 in Win 7 Pro 64-bit SP1 (without welding and otherwise, I'm happy!) I see an additional FF button on the taskbar at the bottom left. Other applications, including the FF V9 using the existing button in the taskbar (the one used to launch the app). I really hope this isn't a 'function' (dress-ed bug). Please remove extra button, or, as appropriate for other users, an option to combine with existing button.

Hello

Please see this thread. There are two different ways that you can try to reset to the original.

Thoshiba Tecra S1 DVD player

I have new hardware and installed Windows2000Prof.

My problem is:
After that a starting the computer from the cd-rom station (now Z) does not see the files on the CD-ROM drive.

After the suppression in addition (new material) the CD-ROM driver it still works good but it's only until the shutdown of the PC.

I installed virtual drive bug (Alcohol120) I removed it after a testament.
TEAC has no driver because it is supported by windows.

Hello

is your version of W2k used a Toshiba OS recovery or your own?

If it is your own, that you should check if you have all the tools and driver downloaded from the page Web of Toshiba and install them in the right order!

This order can be found on the CD tools & security in an html file. This list is the order!

Goodbye Chris

Issue at the start of Windows 7 when you set up windows update

Every time that turn on the computer (it is a VAIO laptop actually), Windows retains the configuration of updates but rest 0% as forever, after awhile, it says failed to update configuration every time then the computer works normally. Every time as it took me a lot of time.

Is anyway to fix this? Either fix the bug configuration or removal of this new update so it won't set up the most?

Hello

Method 1.
If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.
See the article below for additional information and steps.
Open the Windows Update troubleshooting tool
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

Method 2.
Also you can see the article below for some methods more.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

Method 3.

Check if reset the Windows Update components allow you to install updates correctly.

How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058

I hope this helps.

Thank you, and in what concerns:
Shekhar S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

559 http error when trying to add CUCM 11 to Expressway

Hello

I have a BE6000 running and improved a few weeks of CUCM 10.5.2 to 11.01 and the highway has not been rebootet after this migration and worked very well.

Now, I had to reload the whole BE6000 and now I have the problem of this highway seems to not be able to contact the CUCM server.

In the log file, I see this error:

2015 10 - 05 T 20: 51:10 + 02:00 management: Level = "WARNING" Event = 'Configuration of the Unified Communications Server' retail = "Unable to communicate with the server" Host = "cucm01.internal.local" reason = error "HTTP Error" = "" HTTPError:599"" UTCTime elements ="2015-10-05 18:51:10, 799"

Through webbrowser, I have no problem to access the server of CUCM - so CallManager itself seems to work normally.

Anyone had this issue before? What is associated with CUCM 11.01 with Highway X8.5.1?

Thank you

Thomas

Which is related to this bug

CSCus60569 Remove the version 8.x of axl

You must upgrade to x8.6 for CUCM 11.x to work.

Solve the problem while the app is "considered pending"?

I downloaded my app on App World and now found a bug I'd remove. I thought to download a version 1.x. However, I fear that I will lose my chance to qualify for the free offer of the Playbook because my application is not approved yet (downloaded last week).

My application is listed under 'Pending Review'. What should I do? Download the new version, or wait until the app is approved (or rejected)?

Just to clarify the terminology, you have not actually 'downloaded at App World"If your application is still pending review. You have uploaded to the provider portal, where it remains until it has reviewed and approved by RIM "test laboratory". Only once it is approved and you click "Post For Sale" it will appear in App World for download by others.

If you find a bug, make sure that you do not have "Post For Sale" this version, even if it is approved.

Instead, fix the bug and create a new version (upload a package with the new .bar file, signed). The test House will test and approve (or reject) that one, and it is not usually a problem if you do that before one that was approved. Be sure to only use the Release Notes to indicate clearly what you set, so they will know that if it is intended for the difficulty of the problems they have identified.

ASA between tunnel from site to site

Hello

I have a site to tunnel between 2 ASAs. An ASA is behind the University and another in our data center. Unversity offers Internet services and they have the ASA that controls incoming traffic. We used to have problems of tunnel where the stale SAs were inactive and deleted in the center of data due to timeout or other unknown reasons. Subsequently discovered that ASA9.1.5 behind the University had the bug do not remove obsolete entries. After decommissioning of the code to 8.4.6 version we don't see any problems. And not work as usual. Unversity guy said that he added some ACL on the external interface to allow our Datacenter IP to forward VPN traffic.

https://Quickview.cloudapps.Cisco.com/QuickView/bug/CSCup37416

My Question even before adding these tunnels ACLs works but was not remove obsolete entries. I think that, after upgrade, it became stable. Unversity guys said after the addition of the ACL, it may have stabilized the question.

Can anyone can highlight here what's happening?

Thanks in advance.

Hi Vishnu,

Adding the ACL on the external interface doesn't have any report with the entries in table ASP for VPN traffic.

ASP duplicate entries are caused from crypto ACL and interesting traffic.

ASP table displayed duplicate entries ASP and traffic hit an entry ASP.
that is out of date and the traffic on ITS special is blackholed which led to the interruption of the VPN traffic.

It has no connection with the ACL interface.

Hope it meets your request.

Kind regards

Aditya

Please evaluate the useful messages.

Unknown PUP - Please help...

For awhile now, my antivirus program (the salary monthly version of AVG) has been telling me that I have 2 'not - A - Virus.Downloader.Win32.DigStream' on my computer. One is in the program under 'C:\Program Files\DIGStream\digstream.exe' files and the other is located in "C:\System Volume Information\_restore {lots of numbers and letters} .exe '. I have no idea what they are or where they came, and to explore widows, the contents of the DIGStream folder is: locator.dll (ActiveX control for Cache DIGStream Manager and the company is the Walt Disney Internet Group. It's weird because I have no programs Disney.), an uninstall button called "RECKLESS" and a .txt file titled: INSTALL. It reads: * Setup released 2005-08-16 20:54 *.
Title: DIGStream Installation
Source: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\GLB18.tmp
Made Dir: C:\Program Files\DIGStream
Copy of file: C:\Program Files\DIGStream\UNWISE. EXE
Copy of file: C:\Program Files\DIGStream\digstream.exe
Copy of file: C:\Program Files\DIGStream\locator.dll
Register: C:\PROGRA~1\DIGSTR~1\DIGSTR~1.EXE
Register: C:\Program Files\DIGStream\locator.dll
RegDB key: Software\Disney\DIGStream
RegDB Val: C:\Program Files\DIGStream\digstream.exe
RegDB name: ExePath
RegDB root: 2
RegDB key: Software\Disney\DIGStream
RegDB Val: C:\Program Files\DIGStream
RegDB name: InstallPath
RegDB root: 2
RegDB key: Software\Microsoft\Windows\CurrentVersion\Run.
RegDB Val: C:\Program Files\DIGStream\digstream.exe
RegDB name: DIGStream
RegDB root: 2
RegDB key: Software\Disney\DIGStream
RegDB Val: http://digstream.go.com/digstream/autoupdate.xml
RegDB name: AutoUpdateUrl
RegDB root: 2
Delete the files in use: on
RegDB tree: Software\Disney\DIGStream
RegDB root: 1
RegDB tree: Software\Disney\DIGStream
RegDB root: 2
Run the program: C:\PROGRA~1\DIGSTR~1\digstream.exe/Shutdown

I'd be worried, or something else? I have no idea what it is, and any help would be appreciated. VirusScan AVG also, recognizes it as a PUPPY, so should I remove it?

Thanks in advance,

HRMS Oracle EBS absence request

Hello

I'm trying to recover the history of the absence of a specific person (approved, pending, rejected, go back to the Correction).

I am just new on EBS and PL/SQL. I found on the net some useful sql queries but I understand fully sense.

The following query is to find the approved absence:

SELECT pat. name absence_type

AAP . date_start leave_start_date

AAP . date_end leave_end_date,

AAP . absence_days ,

AAP . abs_information_category ,

AAP . abs_information2 ,

AAP . abs_information3 ,

AAP . abs_information4

DE per_absence_attendances AAP

per_absence_attendance_types pat

per_all_people_f women's wear

OÙ paa. absence_attendance_type_id = pat. absence_attendance_type_id

AND papf. person_id = paa. person_id

AND Trunc (paa. date_start ) BETWEEN Trunc (papf. effective_start_date ) AND

Trunc (papf. effective_end_date )

-I removed the following section

/ * AND TRUNC (p_date) BETWEEN TRUNC (paa.date_start)
AND TRUNC (NVL (paa.date_end,
PAA.date_start
)
)
*/

AND papf. person_id = :p_person_id;

Correct me if I'm wrong, what I understand of this application is that if absence start date is between the effective date of the employee in the per_all_people_f table his request for a leave of absence is approved? And there is no aspect of the supervisor and posting here?

The ongoing absence request, to query the tables:

HR_API_TRANSACTIONS

HR_API_TRANSACTION_STEPS

HR_API_TRANSACTION_VALUES

and hr_api_transactions.status = 'Y '.

The other found State:

'IR' = return of correction

'E' = error

but that means 'W' and had "?"

And how do I get the absence rejected by the contractor?

HR_API tables, I understand that self-service is used.

When you create the request on self-service, happening in HR_API TABLES, and a WF is launched for the approval process.

Once the WF is lance, the api.status has the value 'W' on hr_api_transactions, and a part of the WF and the keys are saved. If approved, the information used to create a record in per_absence_attendances.

Now, to your questions:

Correct me if I'm wrong, what I understand of this application is that if absence start date is between the effective date of the employee in the per_all_people_f table his request for a leave of absence is approved? And there is no aspect of the supervisor and posting here?

If there is a record in the table of absences, it is approved. The range of date condition is to identify the person's record at the date of the absence. Assignment information is stored on per_all_assignments_f, where the controller id is stored.

The ongoing absence request, to query the tables:

HR_API_TRANSACTIONS

HR_API_TRANSACTION_STEPS

HR_API_TRANSACTION_VALUES

and hr_api_transactions.status = 'Y '.

The other found State:

'IR' = return of correction

'E' = error

but that means 'W' and had "?"

And how do I get the absence rejected by the contractor?

I use the following to identify in the absence of process applications (somehow the editor added some formatting of table):

AND api.status

NOT IN (A ',' E ',' CA ')

(hr_absutil_ss.getabsencetype(api.transaction_id,) IS NULL AND not api .status = 'W')

the other statutes are transient, in my opinion, and you should not worry about their.

The rejection, the API tables information is deleted, if you want to dig into it, I think that you might want to then rely on workflow tables, if he is not already served.

Note: If you are looking for a complete story you must also consider item post absence balances (again, the formatting is a failure):

-Select / * + leading (AAP) * / nvl (fnd_number.canonical_to_number (pev.screen_entry_value), 0),
Select nvl (fnd_number.canonical_to_number (pev.screen_entry_value), 0),- bug 7579341, tip removed
PEV.effective_start_date,
PEV.effective_end_date
of pay_element_entry_values_f EPI,.
pay_element_entries_f wee,
per_all_assignments_f AAP,
per_absence_attendance_types abt
where pev.element_entry_id		= pee.element_entry_id
and pev.input_value_id		= abt.input_value_id
and pee.assignment_id		= paa.assignment_id
and paa.person_id = p_person_id
and abt.absence_attendance_type_id = p_absence_attendance_type_id
- and pee.creator_type <> 'A' - Bug 4422696
and pee.creator_type	No in('A','EE','NR','PR','R','RR') - Bug 4422696
and pee.element_type_id =
(select pet.element_type_id
of animal pay_element_types_f.
pay_input_values_f piv
where abt.input_value_id = piv.input_value_id
and piv.element_type_id = pet.element_type_id
and p_date_to between piv.effective_start_date
and piv.effective_end_date
and p_date_to between pet.effective_start_date
and pet.effective_end_date)
and p_date_to between paa.effective_start_date
			and paa.effective_end_date
and paa.primary_flag = 'Y '.
and pee.effective_start_date<= p_date_to="" ;="">

PUPPY. Bug PC mightymax removal

Similar Questions

Maybe you are looking for