Color LASERJET CP1025nw - Fuser error

Similar Questions

• color laserjet MFP M177: error message when you try to print

  Hello

  I have a HP Color laserjet MFP M177.  I can't print I get an error message on my computer screen. No messeage shows up on the printer.  I have recently upgraded to windows 10 (I do not know what version) If this could have something to do with it?

  Help, please

  Thank you

  Hi @Daisy001,

  Welcome to the Forums of HP Support! I see by your post that you can't print, since the upgrade to Windows 10. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  If you have not completely uninstall and reinstall the driver, I would say to start it there first. Here is the link to the latest drivers: Color_LJPro_MFP_M177_full - solution_15188.exe

  If the problem persists, you can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  Please let me know the results and if there is anything else I can help you. Thank you.

• Color LaserJet CP1025nw

  I read that some printers print more quickly after storage. Is it possible to do this with the CP1025NW color laserjet?

  Is it possible to put more memory in the printer to speed it up, or is - it possible to put more memory in the computer to speed up the printer?  I need to know what question you are asking.

• color laserjet cp1025nw print streaky

  I get entrelardé & dirty my HP Laserjet CP1025nw color printing.

  Have executed the impression several times cleaning process without success.

  This just happened. He perfectly managed so far.

  Hello newoboz,

  Welcome to the Forums of HP Support!

  After reading your post, I see that you have the LaserJet CP1025nw and it is poor quality printing. Run the cleaning of the printer will usually clear up problems.

  I was able to locate this HP document: print quality problems, it contains 11 steps to help solve this problem for you.

  I hope this helps, let me know if it does not work.

  Kind regards

• paper in color laserjet 2840 jam. error paperdraw broken paper removed, remains in the display. Windows 7

  I had a paper get stuck in my printer HP Color LaserJet 2840. I removed the broken book. Then it hapenned again.

  Deleted the book broke for the second time and now the error message on the print remains on the screen.

  Also when I restart the computer os turn off the printer. I also looked at the printer, but I don't see anything.

  Troubleshooting page here can help.

• Color LaserJet 1600: print error for Color LaserJet 1600 not solved with troubleshooting or relocation attempt

  I get an 'impression' error when trying to print any document. Have used the convenience store, who said that a print job has been blocked and that the authorized troubleshooter. Second attempt, same result. Attempt to uninstall printer but had received "implemented encountered abnormal program execution. Implementation will stop. "The next window: your printer may have been incorrectly installed, try to reinstall with the recommended settings. Got it but no change. Try "add/repair" printer with no solution. INFO: Color LaserJet 1600, PN # CB373A, Windows 7 Home Premium

  Hi Brenda6,

  When you reinstall the printer helps reinstall you by plugging the USB of the computer? Or are you downloading from the HP site? I recommend that you disconnect the printer from your computer by unplugging the USB or disconnect the connection without wire and then go to the HP support for HP Color LaserJet 1600 printer. Find your printer driver and reinstall.

  I hope this helps!

• Color LaserJet CP1025nw: new PC Windows 10, said CP1025nw is Offline after find and install it.

  My CP1025nw is on my wired network Ethernet. My new desktop to Winows 10 PC finds it and it installs, watch even correct for this IP address in the info page of HP. But it will not print to it. Says it is Offline, tells me to turn it on. But if it is not enabled, how my PC find it and get his IP address? I can even ping by using Windows PowerShell.

  My other PC on the network print to it. This PC also running Windows 10, as an update to 8.1

  I tried to remove and re-add several times. Have rebooted several times, turned the printer on and off many times.

  BTW, I do not use the direct wireless functionality for this printer. It's all pure Ethernet/TCP-IP, Wired.

  It looks like a bug in the driver. How can I get a driver that works well, like my other 10 PC of Windows? I use all the HP tools that I can find. They say that there is no update pending for this driver.

  Hi @Allie_Sch,

  Welcome to the Forums of HP Support!

  I see that you are having problems with your HP LaserJet Pro CP1025nw color printer disconnect. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  It looks like it could be communication issue between your computer and the printer or there is a problem in Windows.

  I would like to start by performing the steps in these guides, Printers HP LaserJet - "offline" Printer Status Message appears and HP LaserJet Pro CP1025nw printer - printer does not maintain the wireless connection.

   

• Color LaserJet CP1025nw, unable to change the print density

  Hello

  I need to raise the "print density" 5 (for pcb toner transfer) on my Laserjet
  Color CP1025nw, but when I open the properties of the printer I don't have this option
  on the device settings tab, despite what is said on the page using this model.

  OS: Windows XP
  The printer is on the USB port.
  The driver is: HP LaserJet Professional Series CP1020 + update

  How can I change this setting?

  Help, please!
  Thank you in advance for any help you can make!

  All the best,

  Hi Spencer,.

  Fine forecast here too, but only 65 F, which is above normal for this time of year.

  I finally installed a wireless router to access the printer and BINGO!, all the density settings are

  available via the integrated Web server.

  Thank you again so much for the advice for beginners I

  All the best,

  Benoit

• Color LaserJet CP1025nw: printer does not print after changing cartridges

  I just inserted cartridges M, Y and C in my printer.  They are official cartridges 126 a.  I followed all the instructions (shook gently, removed the orange protective cover and pulled the Ribbon out).  I inserted one at a time, waiting after each insertion for the printer to run through its cycle.  Then I tried to print a color print job with no luck.  Then I tried to print a simple typed page - once again, no luck!

  Is it possible to print a test page?  I don't get any messages on my computer.  When I look at the print queue, it says "error printing".  Help, please!  Thank you.

  Note later: my mistake!  I turn on the blue light from the top; Once lit, the printer has been good to go.  Can tell you that I'm not very technologically savvy?

  So it works very well now?

• Color LaserJet Pro M252dw: "error memory of supply" for a cartridge after software upgrade. Now unusable printer

  Software update on October 8, 2016 resulted in 'Providing a memory error' for the Cyan cartridge. Co-incidentally, it's the only 3rd - Party cartridge in the machine. All cartridges were working perfectly before the upgrade. The machine is now completely in-can be used as the message seems to inhibit printing.

  The cartridge is more than 80% full and I do not wish to replace in an attempt to achieve a solution in this way.

  I tried:

  * Remove and reinsert the cartridge

  * re-start in as many ways as I can think.

  * check whether the absolute latest version.

  * Search the forums for any solution - without success and similar messages

  I have an urgent need to print and I am very unhappy that I have no way to contact HP directly a defect in software on a product a few months out of warranty. I hope that I will not this escalation outside HP.

  Hello

  Use this tool to downgrade the firmware to an earlier version that doesn't authenticate the security of the cartridge chip, then check for the difference:

  http://ftp.HP.com/pub/softlib/software13/COL66159/LJ-162324-1/M252_Series_FW_Update-20150716.exe

• Color LaserJet CP1025nw: install a password, my neighbors cannot use my printer

  Hello, I just got a new LaserJet CP1025 and I was wondering how to set up a password for the people in my building don't can not use my printer. The printer is visible to all, and I don't know how to hide or block. My wifi network is password protected but does not seem to apply to the printer, because when I browse the newtwoks with my phone it shows the printer as an open network.

  Thank you!

  You must turn off wireless directly into the printer and it's own SSID won't be visible. Then just use your routers SSID and password for connect and be sure.

• My Color LaserJet CP1025nw print a vertical line of blobs of different color structured about 4 mm wide

  

  What it means? How to fix the printer?

  I solved the problem when to replace the print with the new drum.

• Color LaserJet CP1025nw - light of Attention on

  Hello! I hope someone can help with a preview on a printer problem, I have.

  Here goes...

  It of almost 1 year out of the box and has stopped working. When I turn it on, the amber attention LED flashes and stays on. The Green led also lights up. When I try to print a Setup page a window pops up saying: "Unable to establish two-way communication with the device." It is plugged in and that the power cords and usb are intact.

  There is no jam that I can see. I can't turn the cartridges to see if there is anything wrong or to replace them, even if that was the case.

  I feel like it happened after I installed the update of the firmware.

  I'm on mac os 10.5.8

  What I tried:

  • Shooting printer / disconnecting operations 'x' down for 30 seconds before turning back on

  • Uninstall and then reinstall the driver from the floppy disk supplied in the package

  • Uninstall and then reinstall the latest drivers downloaded from HP

  • Reset the system preferences print system

  • It scream

  Any help would be greatly appreciated. Thank you!

  I'm sorry to hear that.  I have this lift to the right people.  You should hear from them before, for a long time.

• I can't get my printer LaserJet CP1025nw of color appears on the installation wizard

  I am running Snow Leopard on my iMac. I downloaded the printer and the file of the software on the HP site. However, when I get to the Color LaserJet CP1025nw Printer Setup Wizard does not appear on the list even though I have just completed the installation.

  Hi Casey,.

  Sorry, had the wrong impression that you use a connection network caused the question sympthoms.

  Please make sure that the printer, USB is directly connected to your Mac and no more than 2 - 3 m long without using a USB hub or extension. It can cause serious communication problems. Please also plug the USB key into a different USB port on your Mac.

  If you have an iMac, also be sure to plug the USB key into a port on the back of the printer and not on the keyboard (like the keyboard ports are not powered and actually provide the same power as the use of a hub)

  On the Mac, click the Apple menu.

  While holding the ALT key, click System Profiler from the menu.

  In the left pane, click USB

  You see the printer listed in the right pane?

  If the printer is not listed under USB, this means that the unable to communicate with him without any problem of Mac software, so I would recomment USB cable it to try another.

  If the printer detected as expected, please let me know.

  Kind regards

  Shlomi

• HP Color LaserJet CP3505n: 3505 printer fuser error

  I have a fuser error 50.9 and followed all the troubleshooting steps. Still no luck. Will need to take to repair Monday, but want to make sure I did everything what I can here before. Very frustrating.

  Have you replaced the fuser unit?

  You can buy a unit of merger used to less than the work that you will be charged for the diagnosis.

  Then the repair shop will sell you a unit of fusion for about 40 per cent more that you would pay for a new fuser unit if you bought it online.

  If the fuser unit has been hard to replace, I would say, take it to a ship, but this one is too easy.

  You can buy a CP3505 work with toner for less than the cost of a repair. (eBay)

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...