Purchased items 10 / 10 Prime Minister but it will not install

I have a Mac and operating system is up to date but get eror that says "your Setup encountered errors.  It then tell me to restart, I did it several times, but Setup keeps to a standstill and giving me the same error.  Then there all that describes the error

Exit code: 7

-------------------------------------- Summary --------------------------------------

-0 fatal Error (s), 8 (s), 7 warning (s)

WARNING: DW031: payload: camera profiles Installer 6.0.0.0 {3F023875-4A52-4605-9DB6-A88D4A813E8D} has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Installer_6.4_AdobeCameraRawProfile6.0All camera profiles 6.4.0.0 are uninstalled now.

WARNING: DW031: payload: camera profiles Installer 6.0.0.0 {3F023875-4A52-4605-9DB6-A88D4A813E8D} has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Installer_6.4_AdobeCameraRawProfile6.0All camera profiles 6.4.0.0 are uninstalled now.

-Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0.

ERROR: DW006: Apple package cannot be installed successfully.

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

ERROR: DW050: the following payload errors were found during the installation:

ERROR: DW050:-Smartsound3: installation failed

ERROR: DW050:-Photoshop Camera Raw for 10 elements: installation failed

ERROR: DW050:-Smartsound1: installation failed

ERROR: DW050:-Adobe Premiere Elements 10: due to a lack of Language Pack installation

ERROR: DW050:-Adobe Premiere Elements 10_LangPacken_US: installation failed

ERROR: DW050:-Smartsound2: installation failed

-------------------------------------------------------------------------------------

Any suggestions?

Try http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

Tags: Adobe

Similar Questions

  • I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

    I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • Trial version of Streets & Trips, but it will not install. I get an error message indicating that Microsoft Visual C++ 2010 Redistributable must be installed

    original title: trial version of Streets and Trips
    I downloaded streets and trips 2011 version of track, but it will not install.  I get an error message indicating that Microsoft Visual C++ 2010 Redistributable must be installed.  It has been installed and then I get another error message saying "one of the prerequisite components failed to install. Implemented now will end "what can I do to start the installation of Streets and Trips?

    Hello

    Which edition of Windows are you using?

    Example of Windows 7 ultimate 64-bit.

    Please follow the steps mentioned below to help solve the problem.

    Method 1

    a. perform a clean boot

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: follow step 7 to put the computers start to Normal upward departure mode once you have completed all troubleshooting.

    The article above applies to Windows Vista and Windows 7.

    b. now, try to install the game and check if it helps.

    If the problem persists then please continue to,.

    Method 2

    Error message when you install a Microsoft game or a mapping program

    http://support.Microsoft.com/kb/258496

    Method 3

    You receive an error message on the required components, Error 1316 or error 1722 when you try to install Streets and Trips

    http://support.Microsoft.com/kb/254435

    The article above applies to the versions of Streets & trips

    You can also post your request in the forum Street and the TRIPS Agreement.

     

    Hope this information helps.

  • Windows Installer keeps trying to install msi.status but it will not install

    Windows Installer keeps trying to install msi.status but it will not install and I think he got the other updates to the installation.  How difficult or get rid of it?

    Hello
    In my view, that it is a software HP printer problem. Please, try the following:

    If you have the HP software on your PC support (printers, etc.)
    the disc when the pop-up window displays a location '1'. Click Browse
    then open the HP disc in the CD drive. A named icon status should
    appear. Click on this icon and load. This will get rid of the
    Status.msi loop.

    If you do not have the original disc. Uninstall HP Photosmart all-in-One Driver software and HP update program - then only reinstall the HP Photosmart all-in-One Driver software. Do not update, just live with it. The web link for the full features of the software download is provided below.

    http://h10025.www1.HP.com/ewfrf/wc/s...duct=320478 5

    I hope this helps Mark <> Microsoft Partner

  • Vista Ultimate black screen with the living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86, but it will not install in safe mode

    have a ultimate black screen vista under contract with living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86 but it will not install in safe mode

    have you tried the manager used tasks related to bugs

    Msconfig

    Explorer.exe

    and have had no joy... Please heeeeeeeeeeeelllpppppp

    Hello

    It is the fix in case there are any information it helps.

    A computer that is running Windows Vista or Windows Server 2008 stops responding at a black
    screen early in the startup process
    http://support.Microsoft.com/kb/977675

    Microsoft - contact patch Support issues.
    http://support.Microsoft.com/contactus/?ws=support#TAB0

    ======================

    Other troubleshooting methods that can help.

    Why my screen is black when I start Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

    References to Vista also apply to Windows 7.

    No registration necessary data and re - install Windows 7 might be the best option, but here are a
    few others.

    You can save your files by putting the drive in another computer or an external hard drive enclosure, then
    saving them. Do this using several methods to redundantly. Of course, a real computer
    Shop or the manufacturer of your system can help to recover the files.

    --------------------------------------------------------------

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
    -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
    then right click on the device and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
    then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
    accessible by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
    base. That there is no information on a black screen as there is just a blue screen
    adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
    You can try a google to see the proposed repairs, whom some have worked however these
    cover a wide field of efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a window 7 disk? You can try restoring the system to it. If you do not have the
    discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
    it.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    You can create a recovery disc or someone else use same version (to do the system restore
    It only needs to be bootable).

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    Try Repair Options recovery or a Windows 7 boot disk system

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    If nothing works, you can do a repair installation.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (type in a single line or copy / paste a line at a time and then press enter - do not type)
    parenthesis or "BOLD"
    )

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Adobe Acrobat Pro, but it will not install on my machine (to the former).  What is the next step?

    Just downloaded but it will not be installed.  What should I do?

    What version of Acrobat? What OS?

    The solution is to get an older version of Acrobat (if you can) or to update your computer.

  • An update downloaded on my computer, but microsoft will not install

    For some time my computer (running windows vista) tried to install an update that is downloaded, but it does every time said that a problem has occurred and that the computer should go back because it was not installed properly.  Any help with this would be great now I have to many updates awaiting to install, but they cant

    Thank you

    I think that's what you tried:
    http://support.Microsoft.com/kb/976982

    Have you tried the next step:
    http://support.Microsoft.com/kb/971187

  • Registered but Lightroom will not install

    I use a PC, Office 6 Lightroom

    I had problems with my program for Lightroom, so I tried to uninstall and reinstall, but I can't find an option to reinstall without buying. I bought the program, and the serial number is registered with adobe, but still can not find a way to download it again without buy it again or pay for CC... That I don't want to do. Help!

    I think that you can download to download and install Adobe Lightroom 6 (license single App) and then install with your serial number

  • Downloaded the creative cloud app, but it will not install on my computer.

    I downloaded the app creative cloud but it won't install on my computer. When I double click the program button and click RUN, my folder window flashes and then nothing happens. I tried to re download the app and save on my desktop - continues to be the same. I have also shut down my computer and left for a few days.

    I'm working on a Windows 7 - do I have to upgrade my computer? I just want to download Indesign trial. Any suggestions?

    Thank you

    Uninstall anything cc which can be installed.

    clean a http://www.adobe.com/support/contact/cscleanertool.html

    Restart your computer

    Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud

  • I have download the Prime Minister, but I can not launch the application

    It seems that my computer but I can't launch the free version, and I can't click on the 'manage' option application displays only the option "uninstall." What can I do?

    Rafael,

    What version of the premier you trying to install?

    Here is some information on the transition from 32-bit to 64-bit: 32 - bit Support. Production Premium CS6, CS6 Master Collection

    Guinot

  • I have photoshop 5.5 installed on my old computer, so I bought a new computer, but it will not install so I bought the upgrade photoshop elements 13 and award-winning 13, but it will not download to my computer.

    How to install the new version?

    It's not like you have purchased an upgrade to Photoshop.  You say 5.5, which I suppose is CS5.5.  Photoshop Elements is a watered version of Photoshop that is not an upgrade, unless you have earlier versions of the PSE and PE you don't have versions of qualifications required to use updates.

  • I CAN DOWNLOAD APPS, BUT NOTHING WILL NOT INSTALL. App ERROR MESSAGE SAYS NOT VALID WIN32 approx. or ERROR MESSAGE SAYS IMPOSSIBLE to FIND WHEN HE is RIGHT IT VISIBLE IN

    «Computer laptop gateway - 2005.» Windows XP Media Ctr Edition

    Hello

    If you have security software (antivirus, firewall etc.) you can try to disable temporarily for a few minutes, visit a secure site (for example https://www.mozilla.org/en-US/thunderbird), download and check. See also this.

    If it works you can then try to remove any existing Firefox instances and its process/associated files in all modules/areas of different configuration of the software security as a process of monitoring, sup/led process control, virtualization, HIPS etc., in addition to the main security software control panel. Instead create new rules entirely authorized/reliable for Firefox + its associated processes in all the different modules/panels - one installer of Firefox as well as all real/original exe (Application) installed and DLLs (Application extension) is digitally signed by Mozilla Corporation (right click > properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sup processes are started, and you can be able to allow/trust at this time. Please see this.

    The AV/Firewall configuration

  • Windows 7, 64-bit OS AM and I tried to download addons/themes, but they will not install in Firefox

    I tried to download (successfully), addons and themes however Windows 7 tells me that there is an error and it does not recognize the software and cannot open it. So can not change or add to Firefox. AM also using Word 2010 sxo don't know if this is causing the problem.

    If download you the XPI file, then you can use file > open the file to install the extension.

    It is easier to install the extension directly on the site with a left-click instead of save the file.

    See also http://kb.mozillazine.org/Installing_extensions

  • My pc always tells me that I've updated, but they will not install. They are Net Framework 2/3/4 and they seem to be something to do with SP1 and SP2.

    With my windows updates I tells me there are updates that are ready to be installed and when I try to install them they will not install, they are all updated to Net Framework 2/3/4 / and seem to be something to do with Sp1 Sp2, I'm not that computer so I don't know what to , is there something missing in my pc they have a number, KB2539636 KB2518864 KB2518870 KB2478658. could someone please

    Hello

    Follow the steps from the link and try again to install windows update and check if it helps.

    Link: When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603": http://support.microsoft.com/kb/923100

  • Pavilion sleekbook 14pc: WINDOWS updates to DAY AS DOWNLOAD, BUT DO WILL NOT INSTALL

    my windows update will not work. He says that it is impossible to proceed with the installation and changes are undone.

    everything seems to be quite appropriate when cking pc settings, HOWEVER, my HP Support Assistant was correct info to the bottom of the page where it says that I need a new ID for the operating system. I should just close the wizard checks to see if that will work around this info and maybe allow the updates downloaded install OR am I following a false trail?

    I lost hours and hours for months trying to find a solution to this CHALLENGE without talking about money spent on assistance and programs that were supposed to address.

    Has anyone else had such a challenge. Y at - it a solution?

    Thank you

    brenda1235 wrote:

    Well, now that I've been through all this and try to get updates inally I am getting an error code nd have ckd it out and made all the troubleshooting recommended. Since I was now able to get internet this error code may have corrected a 8024, 000.  My first error code...

    Hello

    Windows Update is damaged.

    Please, do try the fixes and scan as shown in the first post.

    In addition, follow all the steps detailed here:

    http://h30434.www3.HP.com/T5/desktop-operating-systems-software-recovery/Windows-Update-error-8024A000/TD-p/2916157

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7

    Kindly let me know how it goes.

Maybe you are looking for

  • VPN access no longer works after upgrade from 10 IOS!  Any input to fix?

    VPN access no longer works after update IOS 10!  With the help of an iPhone 5 or 6, our employees use their hotspot phone to connect to our VPN.  Suddenly, he broke Monday after the upgrade to IOS 10.  We have experienced many versions of IOS, and it

  • Satellite M70-340 - need to old Bios

    Hello everyone I have a Satellite m70-340.I'm updating my bios bios-vista-510 but after that my function keys does 't work (Fn + F1 to F12) also does work' utility t zoom, bad contact on off pilot also does ' t work :-( Mention that I install windows

  • Where to get the Regen backup software

    I lost the software disk that came with my external drive 3.5 inches; can I download from anywhere.

  • Adding a printer to a laptop CQ10-525DX not on the list of the microsoft Update window

    try to install the printer HP Officejet Pro 8500 a Premium of my mini CQ10-525DX laptop but microsoft list not my printer even after that I click on windows update following the instructions for adding addititional printers to the list. Other models

  • The contact group problem

    Help, please. There is a code in which I get a contact name.How to get the name of the Group? try { PIM pim = PIM.getInstance(); BlackBerryContactList contacts = (BlackBerryContactList) pim.openPIMList(PIM.CONTACT_LIST, PIM.READ_WRITE); Enumeration i