Purge to open payable Interface ends with the error "Invalid Cursor"

Similar Questions

• Files not open Adobe reader (PDF) with the error "internal error...". »

  I have a desktop running windows 7 (64-bit) and adobe programs work very well in Administrator account until I added another user.  After you have added the user account standard adobe (reader, Flash Player) programs work fine on the standard account and not on the administrator account. It doesn't matter if I'm trying to use through a browser or not.

  I tried to fix the reader through Control Panel and reinstall without change.

  whenever I try to open a pdf file or access a web page with flash player content I get a
  error message "internal error."

  Original title: adobe "internal error."

  I tried the suggested methods and system restore did nothing to help me.  When I open a new adobe for the administrator account programs worked well.  I don't have to changing the profile settings immediately.

  Then by chance, I tried to access My Documents folder via the file of users instead of the desktop icon (I have had no problem with) and received the message that I don't have permission to access this file and I didn't have the right to change the security settings.  I checked the property settings and he showed that no user had possession, so I was able to change the property on my administrator account. Still not sure how this happened, oh well.

  That fixed my problem with adobe, and all works well. Now, I can remove the second administrator account.

  Thank you for your help.

• Satellite L300 - recovery ends with the error message: 10-FA1Z - 045D

  My Satellite L300 is 3 months old and one a few days ago I resorted to the use of the 4 recovery DVDs.
  After several hours, I get an error: 10-FA1Z - 045D message. I made 3 attempts and get the same message every time.

  Any suggestions?

  My only suggestion for that is you should contact the closest service provider authorized as soon as possible. I am not sure what can be the problem, but it must be HARD drive issue or a problem with the recovery image.

  In both cases, you will get free and if necessary service service can order new DVD of facilities of recovery for you.
  Do not wait too long and vase your time with her. Call the nearest service tomorrow and talk to them.

• Qosmio X 870-Blue-Ray driver update ends with the error message

  I recently received a message from Tempro for updating my Blue-Ray disk driver. Downloaded, extracted and installed. Error message:

  ....................................... Fix Project Setup Wizard

  ... "The build version of the source is not build target.

  Installation was not completed. At each new start (re-boot"I am again asked to install the new version of the wheat - Ray Disc driver.

  D:\nerladdat\Toshiba\BlueRay\Nerladdaat fran hemsidan\bluraydp-20130117155646

  extracted file is: TC30526100B.exe

  I use a Qosmio X 870-11 G 5C370203Q serial No.

  Grateful for the help to solve them.

  Goran

  What version of Toshiba Blu - ray disc player is installed on your laptop?

  Take a look at this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71240

  * MasterG wrote: *.
  + The error message appears because the Toshiba Blu - ray disc player is already updated. +
  + Generally after the update, the version of Toshiba Blu - ray disc player should be * 1.0.3.196 * +.

  + Before the update, my BD from Toshiba player was 1.0.0.929. After the update, I've got v1.0.3.196 +.

• Creation of recovery disks ends with the error message

  I tried to create a recovery disc but got this message "cannot read the following D:\06491XP file. Water hydraulics Error Code: 020150-20-00000000 "at half way through the first DVD disck.

  That means and what I can do to create a recovery disk?

  Thanks for your help

  Hello

  You have linked to burn using TDK or Verbatim DVD-R? You see, some media only good acceptt cd/DVD burn :)

• Satellite A200-175 - recovery ends with the error message

  I bought my Satellite A200 2 years and it was the first time I tried using the recovery discs. These discs are properly kept in their original boxes before you use them (no scratches). My computer has virus and I tried to reinstall the system.

  When I started using the recovery disk, I put disc 1 into the optical drive and wait. Soon, he prompted a 'Ghost' screen and began to copy files. Everything seemed OK, but after a while, I get the following message:

  "wimcopyfileex failed...". Error image restoration... ImageX couldn't shall apply from fist F:/05366xsp.swm index 2 odd in c:

  Can anyone help? Thank you very much

  Hello

  I have the Satellite A200 and I got a DVD only. There is no ghost window. Ghost was used until the year 2005. Since then, Toshiba uses new procedure of collection called Rico or Reco. I remember more.

  Can you please send us the number on this CD/DVD recovery?

• When I search something, firefox opens a new tab with the results. How can I change the settings to where it will stay all in the same tab?

  When I search something Firefox automatically opens a new tab with the results of this research. How can I change the settings to where the results will appear in the same tab where I made the research?

  If you want to open search results in a new window most often is a parameter of the search engine you use.

• Could not open the page to update windows with the error 80072efe

  Could not open the page to update windows with the error 80072efe

  0x80072EFE - ERROR_INTERNET_CONNECTION_ABORTED - the connection with the server has been terminated.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  TaurArian [MVP] 2005-2010 - Update Services

• DVD creation ends after 3 1/2 hours with the error (- 2).

  I used live Movie maker windows to create a WMV file I've used before you create a dvd but this time, instead of using the size 640 x 480 (which is the same as the AVI file that my takes camera, I selected create a movie in 720 p (and I also tried a size hd with the same results) progress goes to 99% then ends with an error in the event log shows two errors)
  1

  Dvd creation engine returned an error (-2) code when burning the disc

  2nd

  DVD Maker returned an error code (0xFFFFFFFE) when burning the disc.

  both have the same time stamp

  looking at some forums where people have the same error, it gives to think it's a codec issue! but the creation of a dvd with the size 640 x 480 works o/k also windos movie maker files work o/k only windows live movie maker with show 720 p and 1080 p problem.

  commits too present some of the forums tend to suggest the creation of dvd does not create movies properly so also as another question, I'm wasting my time scaling a 640 x 480 in FullHD? or do I just create asis 640 x 480 wmv of my avi files.

  as a point of interest, some of the suggested fitting the latest codecs vista http://www.codecs.com forums, but all that did was cause creation of dvd fails

  Failing application DVDMaker.exe, version 6.0.6002.18005,
  timestamp 0x49e02385,
  module failed unknown, version 0.0.0.0,
  timestamp, 0x00000000,
  exception 0xc0000005 code,
  offset 0x5df44770,
  process 0x169c ID,
  start time of application 0x01ca9a8fdd44263e.
  which of course, unknown so I removed the patch of codecs and retried again, but it is not like before.

  any suggestions or solutions would be welcome.
  After working on computers since 1960, I thought I could fix most of the problems, but this one beat me!

  I think I found the opposite of this problem

  I had been the creation of the video using Director or live movie maker, and then using DVD maker free-standing.

  If I use now live movie maker, but instead select 1080 p/720 p / big screen etc, but selct dvd
  He creates the image and then calls DVD maker and creates the o/k on DVD movie

  If the option of 1080 / 720 p may not work with some dvd maker Microsoft could comment?

• Hello I have PC and pay monthly. We are a small company. Question 1: For two years I have a full subscription to Adobe all programs. But the other day I would open an another user InDesign documents and could not open this with the error message: the

  Hello

  I have PC and pay monthly. We are a small company.

  Question 1: For two years I have a full subscription to Adobe all programs. But the other day I would open an another user InDesign documents and could not open this with the error message: "the document is done a new version than my version of InDesign. How should I do to upgrade my version to a version more recent?

  Question 2: I already have a license to use the software on two computers. Am I not allowed to use the same version I've taken down on adobe.com til two computers or terms here.

  Sincerely

  Stefan Svensson

  Hello

  Please see update requests in your desktop CC application.

  CC Adobe license can be activated on 2 machines using the same Adobe ID, but only one at a time.

  Reference: licenses and terms of use | Adobe

  Kind regards

  Sheena

• Hello, I downloaded a new Web site, but all the svg files are not displayed on the browsers. When I opened it in Muse with the "Preview in browser", its fine! can someone tell me please where is my problem? (Sorry for my English!)

  Hello, I downloaded a new Web site, but all the svg files are not displayed on the browsers. When I opened it in Muse with the "Preview in browser", its fine! can someone tell me please where is my problem? (Sorry for my English!)

  Hello

  Could you please check this thread, it might be useful

  Muse exporting is not svg, can only see Preview

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you

• In Windows Mail, I can not open .doc files, I get the error that it was not bound

  In Windows Mail, I can not open .doc files, I get the error that it is not associated, and he tries to search in appdata/IE5 for a reason any.  PDF, PPT, XLS all work fine.  I tried unassoc to unassociate file types for .doc and .docx associate then again these via Control Panel and it STILL does not work.  I'm at the end of my home please help.
  Nicki

  I had to remove the regedit.  for some reason the mail windows refuses to unassociate so go to regedit, I don't like playing with regedit, but it worked, I deleted and then again, all ok now.

  Thanks for the help!

• Unable to connect to oracle DB using VBA and you are prompted with the error:-the client components and Oracle network have not been found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or installation of the

  Hello

  It would be helpful to me if someone can give me instructions on setting the version of driver or oracle client required to connect to the the Oracle DB using excel VBA

  My config: -.

  Windows - 8-64 bit

  Excel 2013-32 bit

  The components of the client / I should install, and how to solve the question below...

  I tried the VBA code... but you are prompted with the error message above

  Void Oracle()

  Con Dim As ADODB. Connection

  Dim rs As ADODB. Recordset

  Dim query As String

  The con value = New ADODB. Connection

  Set rs = New ADODB. Recordset

  strCon = "Driver = {Microsoft ODBC for Oracle}"; "." & _

  "CONNECTSTRING = (DESCRIPTION ="& _.

  "(ADDRESS =(PROTOCOL=TCP)"& _

  "(HOST = HostNumber)(PORT=PortNumber))" & _

  "(CONNECT_DATA = (SID = SIDNumber))); UID = username; pwd = password; »

  con. Open (strcon)

  If err. <>Number 0 then

  MsgBox ("Oracle error:" & vbCrLf & err.) Description)

  On the other

  MsgBox ("Oracle DB Connection successful.")

  End If

  End Sub

  I'll replace it with the values of host origin...

  Thanks for the suggestion you till u gave...

  complete solution is in the link below...

  https://itkbs.WordPress.com/2014/07/28/how-to-install-ODBC-driver-for-Oracle-in-Windows-7/

• So that the supply of machinery of vCenter.  Fails on the customization of operating system prompted with the error "windows could not complete the system configuration to try to resume the computer restart configuration.

  Sysprep from Windows fails with the error while the supply of machinery of vCenter. "windows can not finish the system configuration to try to resume the computer restart configuration.

  I use vmware vcenter spec customization here,

  I'd say it's because of incorrect permissions or corrupted registry entry or registry that exceeds 8 KB.

  Please visit https://social.technet.microsoft.com/Forums/windows/en-US/658528ce-6eb5-403b-ae41-458147c2c044/sysprep-failling-after-reboot-into-oobe

  Also change to vmxnet3 NIC and install vmware tools and try cloning.

  "

  ) More than 8 k

  (b) set incorrect permissions

  (c) corrupted somehow

  For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupted sometimes) so it was impossible to tell what program it was.  Fortunately, there is a newspaper, you can watch that will tell you exactly what registry key is slightest mistake out.  Here are the steps to get the newspaper, you must see:

  When you see the error message, follow these steps:

  1.) press SHIFT + F10 to get to a command prompt

  2.) stand C:\windows\Panther

  3.) find the Setup.etl file and find a way to copy this file out of the system (I copied it to the partition D:\ and Ghost used to collect this partition and down the file)

  4.) copy the file to another computer that has Windows 7 setup.etl corrupt system.  Place it at the root of C:\ for easier access.

  5.) open a prompt on the Windows 7 computer.

  6.) navigate to the root of C:\ (or anywhere where you saved the file)

  7.) type "tracerpt setup.etl o logfile.csv.

  8.) close command prompt and open logfile.csv in your text editor of choice.

  9.), look in the log file (near the end, probably) for messages that say "Failed to key"reg"process or one of its descendants" to me, the exact eror looked like this: "failed to process the"reg"key or one of its descendants: [profile \REGISTRY\MACHINE\SOFTWARE\ESET\ESET Security\CurrentVersion\Plugins\01000200\Profiles\@My] ' If you search for"«key reg"' or «failed in the process»»» You should find the failure.

  10.) remove this software from your image, or how to get the registry key that does not work properly.

  After that, you should be able to correctly identify any key problem and the elimination/workaround on your image.

  "