Push message to external users
Hi all
We have a Blackberry Enterprise Server.
Is it possible to send a push (pap) message to external users (not the registration in our BES)?
Thank you
I solved the problem by changing the order of the transport network in the config.xml file
Tags: BlackBerry Developers
Similar Questions
-
Dimension "Push Messages" on pay-per-use basis
Hello world
I'm working on a collaborative application based on a browser, outside the video an important part is going to be the cat and a shared whiteboard. I decided to use Adobe LCC, but by looking at the price and hoping a large amount of users, chat and sharing whiteboards, I think that the payment of dimension "Push Messages" will not be affordable for me... It is said of a $0.10 per 1 KB of data, which means that is the cost for 1000 letters (about 150 words) which seems expensive. Moreover, we have the White Board that will send also a few bytes on the server... I think for example at a meeting of one hour between two users, chat and share a whiteboard, and to a conservative estimate, it can cost about $10...
I don't know if I did not understant the notion of "Push Messages" or there is something wrong with the explanation...
I would be very grateful if someone could help me with this question...
Thank you!
Hello
The rate is 1000 messages, not 1 KB of data. My best advice for you is to
use your app on the quota free for a little, wait 5-10 minutes after
the room is empty, then check out the usage statistics in the developer
Portal. Generally, you will find that it is quite affordable.
hope that helps
Nigel
-
I tried to move my music and my pictures of my Macbook Pro 2012 to other Macbook Pro 2009, but the older one is absolutely remained stuck. So I unplugged. Now, it will not be read by Macs, and give me a message, the external drive is not readable by this computer. Both are running on the same iTunes updated and Maverick. What can I do to recover thousands of photos and CD?
The disc in particular is either corrupted or has failed. If you don't have a backup, you find yourself working with a data recovery service, which will not come cheap, and they don't guarantee any results - to try to shoot everything that is left behind. Reformatting the drive - if it has corrupted and not failed - could bring the disk itself to the utility, but that won't help with any data on the disk.
-
I have an Iphone 6 and can't send or receive text messages to Iphone users not. I can send the Imessages blue very well, but it is impossible to send green messages any idea how to solve this
SMS or text messages, are a specific function of the carrier. You must have an addition of text on your cell phone plan. If you can not send SMS, you must contact your operator to solve the problems.
-
Flatten to a string to send arbitrary objects by messages from the user interface?
Hi people,
I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is only one character or nothing in the message of the user interface that reached my reminder.
It seems that flatten channel also creates control characters that are interpreted by NI TestStand and Labview not as members of the chain, and for this reason I only get incomplete data. within the action of testand, which creates the flattened data, I put a dialog box to display the string data, and it seems that at least up to 255 (ascii) characters are used.
Is there something like uuencode/uudecode to avoid this problem?
Thanks in advance
Okidoki, found.
His «binary"produced by «Flatten the string» string Apparently I thought, the LabVIEW data type is incompatible with the API of TestStand from LabVIEW. In conclusion I would classify this as a bug (sorry people, at least there should be documentation) API for LabVIEW TestStand 2014.
As a solution, I use flatten it in XML, which is a printable and human readable 'normal' string.
It was trial and error, and I'm not enjoying this.
-
Display a message to a user in a while loop
Hello. I've been using Labview for about 4 days and I have this preface saying that it is a homework problem, I'm not looking for an exact solution just someone to point me in the right direction. I need to display a message to a user. The problem is that, since it is within a while loop, when the condition is met for the notification to display, it just returns to the top and never let the user change the values to correct the problem. It should be pretty obvious that the vi is supposed to do by looking at, and everything else works fine, until I put the message in it. As an aside, I know that there are probably much better ways to accomplish the tasks that I decided to do about it, but as I said, I am completely new to LabView, so I apologize for the most elegant programmers out there for my brute force programming! I searched the forums and found a few things about statements of case and registers at offset, but I have no idea how to use. I have on this part of the problem, worked for hours now and make me nowhere, so any help will be really appreciated.
Welcome to the Forums!
First of all, thanks for pointing out that this is a homework problem. We mind helping people learn LabVIEW but oppose when someone is trying to put his homework for him.
Statements of case and shift registers are probably what you need to learn next. Specifically, a state machine is probably well suited for this type of program. I think that your LV version came with a template or design for a state machine model. Look under the menu file > New... (No new VI) and see if you can find a state machine model.
Other comments:
-If you don't use a structure of the event, and then put a (ms) waiting inside the loop so it doesn't turn thousands of times per second that does exactly the same thing each time until the user changes a control.
-In line and force? will make the comparison and select lower left and upper right part of your VI.
-Force the amount entered for the multiple of 5 cents is OK, but can be confusing to the user trying to get 3 cents. A note on the Panel or a bunch of advanced control may be useful.
Lynn
-
Original title: Remote Desktop
We have Windows Server 2012 essentials (evaluation version) installed and working. When connecting to even via the remote desktop connection it works fine, but when a second (another) user tries to connect using the connection to remote, a message "select a user to disconnect so you can connect. The names of the 2 users are displayed the first is the name of the administrator of the local server and the second is the remote desktop user who was first. We need at least 3 to 4 remote desktop both users to be connected. Please advice
Hi BHARATISRANI,
Thanks for posting in the Microsoft Community.
Since you are using Windows Server 2012 Essentials, the question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:
-
Display a message to the user w / result of data
Howdy,
First off it is a mission of the College work and it's especially complete; seeking advice and the experience here. The mission is to create a calculator with many functions for each method of arithmetic. It was easy enough, but the next step is to display a message to the user after each calculation. For example, if the problem was 4 + 2, the message must be "the result of the addition is: 6. the creation of the part of the message by using the Msg to display the user-defined function is simple, but it is not exactly struck home. I want to create a message that contains the result of the problem (for example 6). As it is now I can't do that with the function of Msg, or if it is possible I can not quite understand. I want to have a separate message for each function, but I don't know if I can incorporate the response into the message. It's the underlying objective; How to integrate the response in a message dialog box to the user? If it is possible what should I watch?
The VI himself is quite simple; case of structure for each arithmetic function and a certain time for execution loop. X and there are entries and a drop-down list to select a structure if necessary. I've attached a screen below.
Thank you
THA
You can use the Message to display to the user to view any string to the user. If the key is to use the palette of the chain to manipulate strings to get the error message.
A subpalette of the palette of the chain is the range of number/String Conversion. This can help you get your (6) value into a string format and then you can concatenate that string however wished with the message.
With the pop-up windows, you must make sure that you're not trigger this popup with every single loop, so make sure you put a case around the pop-up structure and place the logic in there to make it work only the case of popup when the value changes.
-
Original title: cannot open a session
I get the message "the service user profile Service has no logon. User profile cannot be loaded. "I can't get on my computer. What can I do? Help, please! I need to get the work done.
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
-------------------------------------------------------------------------------------------------------------------------------------
For Windows 7:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html-------------------------------------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html-------------------------------------------------------------------------------------------------------------------------------------
If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Win32 application. "
I get message 'Application C:\Users\...\...\...is not a Win32 valid' when I try to open email attachments
Hello
- What mail client do you use?
- You did any recent changes?
I suggest you try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
Otherwise, provide us with more information about the issue so that we can better help you.
It will be useful.
-
Having only one administrator user account. All my other user accounts will get the above message. Help, please.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
How can I solve this problem? I have Windows Vista.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
The error message reads "the user profile Service service has no logon.
User profile cannot be loaded.
Thanks have tried but can't boot from a fix it for me or set me.
Go to Safe Mode with networking
Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Mode safe mode with networkingYou can log into your own account in safe mode?
If so, you remember the date when you did NOT have this problem?
If so, this date no more than 10 to 15 days ago?
If so, again, please do a restore of the system in safe mode.How to restore the system:
Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
To sit and wait. The machine restarts when it's done.Once completed, restart your machine and see if you can log in to your account in NORMAL mode.
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
We get the error message "the service user profile Service does not logon, user profile cannot be loaded." Prevents us from entering the computer laptop-so how to solve this problem? Help?
Hi LisaPie,
Step 1: You can run the fixit available in the article below
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/If you cannot start the computer in normal mode, try the steps in safe mode with networking
Step 2: Start the computer in safe mode with network. To do this, follow the steps below:
Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. Advanced startup options menu select SafeMode with networking
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
So I went to update my iPhone to the latest version 6. I backed up via iTunes and when I type it tells me I need to install the latest version of iTunes, version 12.5.1. I click it and it takes me to the app store, which in turn told me that it is
-
Apple TV with tvOS 10 will not find my Philips Hue lights
I recently updated my Apple TV to tvOS 10 and one of the new features is Siri command you homekit active devices. I have Philips bridge tint 2 and works of great Siri voting control of my iPhone but Siri on Apple TV responds only that I have not any
-
Satellite A300 stops after 5 minutes of use
Hello I recently had my laptop back on the Toshiba Warranty Service that my machine was not able to receive the juice when it is plugged in but it worked fine on battery!They replaced the motherboard and taken the power cable and the machine seems to
-
Energy saving forget the settings?
I've got my energy saver set to never sleep. This last few days, it will identify spontaneously in 15 minutes (to sleep). I have same 'locked the lock' to prevent the change. There are no other accounts or users on this computer, just me. Any ideas a
-
HP laptop - 15-ba078dx: compatible Bluetooth
There is no "Bluetooth" button in settings under devices. When I go to 'devices', I have to choose is "Connected" to try to find a device. My speakers will not be judged by the computer... My laptop has bluetooth capability? Just bought this laptop t