Push registry, is there a way of BB?

Similar Questions

• Is there a way to save the registry?

  I had a hard drive crash, the technology was able to recover all my files, but had to use a new disk to start. The old drive is now a slave but who no longer starts. Could not save my programs, because the new registry is not correct. Is there a way to save a registry and re install. Since all my files could be saved, I think there will be a way of not having to reinstall all my programs again. Some are older and after moving several times, I don't know even where to find the original programs to reinstall them, but I would use the the one I had. Also can I do a full backup of the entire system on an external drive that could be used to restore my computer to a State before the hard disk crash? (including the registry, of coarse)

  You can try cloning the old hard drive to a new one and then try to fix the boot errors. However, if there are other problems with the old hard drive, it may not work.

  But just passing the registry would not work. It is specific enough for the installation. You must move files much more (which would make a clone - it would be a 1:1 copy of your old disk).
  If the drive is not too badly damaged, a clone would probably work for to revert you to a State before the accident. However, it is not for the faint-hearted. You need a spare drive to clone and then to repair the operating system to start correctly as well as other errors that appear along the way.

• Is there a way to remove the profiles via the registry setting or vbscript?

  Original title: user profiles are not deleted

  I used delprof in windows xp, in a script, to remove cached user profiles, but it does not work for Vista Ultimate. I tried reprof but the characteristics of certina if Vista prevents the Remprof of work corre4ctly. I also used the GPO setting on the client system Vista. I put the time of deletion for all the two days. Because it requires a reboot I had put Scheduler Restart every two days.  User profiles were still on the system after reboot. Is there a way to remove the profiles via the registry setting or vbscript?

  Hello gregzig,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited on the Technet forum. Following your question thanks for posting the link below:

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it done to unplug iMac to unlock that damage the computer? Is there a way to force close when it is completely insensitive?

  I tried closing a screen and got a spinning wheel. The system was totally insensitive. I tried to close it with the power button and when it restarted, he returned to the State. So, as a last resort, I disconnected from the back. After I waited 30 seconds, I plugged it it back, pushed the power button, and it worked fine, once again. Told me you should not unplug the computer because you could do a surge when you plug it in. Is there a way to force quit the application causing the gel when the computer has been insensitive to everything? How about by pressing Command-Option-ESC for 3 seconds? That would have worked?

  Command + Option + ESC only leaves open applications.

  The next time that the system does not respond, press and hold the power button until the screen goes black.

  Wait at least ten seconds before press power once to turn it on again.

  * Never disconnect your Mac from its power source while it is on

• Is there a way I can welcome screen, windows logon password?

  Is there a way I can welcome screen, windows logon password? I just want my computer to boot and in windows without the logon screen?

  Thanks for your help, I would be without a computer if I don't hadn't found you.

  Extract from http://support.microsoft.com/kb/315231...

  You can also turn on automatic logon without editing the registry in Windows XP Home Edition and Windows XP Professional on a computer that is not joined to a domain. To do this, follow these steps:

  1. Click Startand then click run.
  2. In the Open box, type control userpasswords2, and then click OK.

     Note When users try to view help in the window information user accounts on Windows XP Home Edition, the help information is not displayed. Additionally, users receive the following error message:

     Cannot find the: \Windows\System32\users.hlp Help file. Check that the file exists on your hard drive. If it does not exist, you must reinstall it.
  3. Clear the "users must enter a user name and password to use this computer" option, and then click apply.
  4. In the automatically on log window, type the password in the password box, and then retype the password in the Confirm password box.
  5. Click OK to close the window automatically on Journal , and then click OK to close the user accounts window.

  Tricky

• Is there a way to recover deleted history sites? Also, a way to prevent unauthorized users to erase history?

  Is there a way to recover deleted history sites? Also, a way to prevent unauthorized users to erase history?

  You need administrative rights to do this. Be careful as it is possible to easily create a very difficult to solve waste.

  Run gpedit.msc

  Reach

  -User configuration

  -Administrative templates

  -Windows components

  -Internet Explorer

  -Delete browsing history

  Disable the feature turned on 'delete browsing history '.

  You also probably want to configure

  -InPrivate

  Disable the active InPrivate browsing

  If you use IE8; Otherwise, the user can simply avoid registering in the first place.

  Also - the browser menus

  Tools menu: Disable Internet Options... menu active

  would be a good thing; Anyone who shouldn't be allowed to delete the history of should not be also change too much in the Internet Options.

  For some reason, changes to this setting of group policy have no effect in IE6 and IE8 on a workgroup computer XP Pro.

  In fact, I would like to disable the entire Tools menu item; However, there don't seem to be any means to do.

  Run gpupdate /Wait:0

  Any user who cannot access gpedit.msc, editing the registry (regedit.exe, regedt32.exe) or mmc.exe may re-activate it now grayed out in the menu items.

  Note: mmc.exe can be activated by right clicking my computer even as a limited user. Remove or deny permissions to these files for administrator users.

  I would like to configure them on a per user or user group basis. Does anyone know of a way to do by not part of a domain?

  I know no direct way to recover deleted history sites. Perhaps, they enter the trash somewhere. They may be captured by the network of monitoring programs, even if they have been deleted from the personal computer.

• Is there a way to force the list of databases Access, rather than having the giant icons in my taskbar?

  When I have a few databases open, my taskbar has an icon for each file that is opened in a sloppy "battery."  Naturally, when I hover over the battery, miniature windows display each file.  After that I have a good number of them open (for example, around 10, 11 or 12), stacked icons convert a vertical list.  Is there a way to force this vertical list, even with also open some two or more db?

  If you have Windows 7 Pro or Ultimate, you can use Group Policy.  Otherwise, you will need to perform a small registry change.

  For Pro or Ultimate, see method 1 here--> http://helpdeskgeek.com/windows-7/disable-taskbar-thumbnail-previews-windows-7/

  For any version of Windows 7 (also allows you to set the number of preview windows that appear before moving on to the list), see--> http://www.sevenforums.com/tutorials/75804-taskbar-list-thumbnail-previews-mode-change.html

• Is there a way to disable automatically minimize windows.

  OT: WIndows open the screen management?

  In Windows 7, when moving windows around, open window minimizes them automatically. Is there a way to disable this option?

  Is the window you move minimizing all of a sudden, or is it all the other windows on the desktop?

  If its all others, this sounds like "Aero Shake" - http://windows.microsoft.com/en-us/windows7/products/features/shake

  If it is "Aero Shake" then see if that helps - http://www.sevenforums.com/tutorials/74845-aero-shake-enable-disable.html if you have Group Policy Editor and use the Reg files, back up your PC first, or at least set a restore point and backup of your registry. OR see http://www.howtogeek.com/howto/windows-7/disable-aero-shake-in-windows-7/ for an alternative.

  However, it is probably a safer method that seems to work -http://www.guidingtech.com/5548/quicklu-disable-aero-snap-shake-windows-7/ so its probably worth a try first of all see if it does what you want.

• Is there a way to prevent Microsoft to change the name of the driver of a scanner to #2?

  I support the scanners as part of my work, and I often that a scanner driver will get automatically renamed by Windows with a "#2" after the name of the original driver. Is there a way to avoid this? The reason is that we have created an application that stores information to scan to use when scanning documents, but it loses connection if the scanner automatically gets renamed.

  Sometimes users are plugging the scanner on a different port while the other times, unexpected events, such as power outages, cause scanners rename themselves to try to restore the functionality but just to break our application. I think at this point, it would be better to disable the naming of autopilot for other USB ports (if there is a way to do it) because we would rather users not being able to scan at all and let us know so that we can resolve the issue that in order to restore the functionality and the user thinks that he is well again , but in fact does not work in our application.

  I don't know if this would require a change to the registry, changes in Device Manager or something else. Thank you for your consideration.

  Hi MSwick,

  Thanks for posting in the Microsoft Community.

  If I understand correctly you are facing problems with the scanner. In order to quickly provide a solution, please answer these questions:

  1. is the scanner connected to a domain network?

  2. how many computers are connected to a network?

  If the scanner is a domain network, I'd recommend posting your query in the TechNet Forums.

   

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  If you need further assistance, please answer and we will be happy to help you.

• Is there a way to detect all the keys that the user clicked in AS3?

  Hi all

  Quick question - is there a way to detect all the keys that the user clicked using the AS3 code? I have pimples on my project and I want to that they be disabled once the user has clicked on it, but I wonder if there is a function that I can write that will automatically disable all keys that the user clicked once?

  Thank you!

  Here is an example where the buttons share the same handler... try it and see if it works (I can't due to not having Flash on hand).  The only problem that I could expect it not to love the evt.currentTarget is not identifiable as a particular class type, but sometimes it can't.  If this is the case there is an easy solution.

  Btn1.addEventListener (MouseEvent.CLICK, processBtnClick);

  btn2.addEventListener (MouseEvent.CLICK, processBtnClick);

  function processBtnClick(evt:MouseEvent):void {}

  evt.currentTarget.removeEventListener (MouseEvent.CLICK, processBtnClick)

  }

  If you also want to keep track of which buttons were clicked already you can store in an array...

  var clickedButtons:Array = new Array();

  Btn1.addEventListener (MouseEvent.CLICK, processBtnClick);

  btn2.addEventListener (MouseEvent.CLICK, processBtnClick);

  function processBtnClick(evt:MouseEvent):void {}

  evt.currentTarget.removeEventListener (MouseEvent.CLICK, processBtnClick)

  clickedButtons.push (evt.currentTarget)

  }

• Is there a way to make the search of texts in the database?

  I was wondering if there is a way to push the search of texts in the database.

  Specifically, I'm looking for a way to create a DocumentTermMatrix and work on it in the database.

  Company R Oracle provides any type of text mining functions or is there a way to push the standard package R tm is run in the database?

  Thank you

  Mike

  Mike,

  Oracle Enterprise R does not include the extraction of specific text features, but because it can exploit data in extraction of features Oracle database, it may inherit the ability to analyze textual data using the tm or other related packages of NOTCH. We provide examples of use of packages open source R with ore in the Oracle Enterprise of R User Guide and training materials. Here are some links to help you:

  See the section called "Run R calculation in Oracle Database":

  http://docs.Oracle.com/CD/E11882_01/doc.112/e36761/using.htm#OREUG163

  See slide 25:

  http://www.Oracle.com/technetwork/database/options/advanced-analytics/r-Enterprise/ore-trng3-transprncylayer-1501636.PDF

  Any R package used with ore must be installed with the R on the database server and client of R.

  Sherry

• Is there a way to: export images in DICOM media in Illustrator?

  I am trying to find a way to automatically import images from DICOM media sets (Digital Imaging and Communications in Medicine) in Illustrator. To be more specific I need to load up to about 20 images of heart-slice of DICOM CD or any other type of archiving systems in Illustrator.

  These clips of MRI DICOM display slices of heart pulsing in systole (when the heart is the smallest) and diastolic (when the heart is larger) and intermediate phases (systole and diastole are two temporal phases of the cardiac cycle, represented by numbers of time), at various topographic locations (they would be represented by number range, or space). I'd like to be able to enter the number of slices (space numbers) in systole and diastole (number of times), then with the push of a button to import the respective jpeg images in Illustrator.

  This thread is related to a previous "is there a way to calculate the area of a shape?

  I would be very happy to help.

  AVI

  Hi George, I can give it a try. I sent a message, please check.

• Is there a way to upload my iWeb site?

  I lost my iWeb domain, is there a way to access my site and download it?

  Kind regards

  Paul

  Yes, you can access your site on your server and if you connect to your server with a program such as Cyberduck ftp, then you can download your iWeb site files, but remember that as he is a published site, these are all html files and it won't be good for you because iWeb is no import , so will be unable to open html files.

  If you have lost your domain.sites files that iWeb uses, then you will need to re - build your Web site from scratch, but as iWeb is not taken in charge and for the past 4 years, I would re-build your site with another application that it is actively updated.

  Take a look at EverWeb here.

• Is there a way to read the settings in a .pst file?

  Hi all!

  I looked everywhere for info on this and found nothing. Anyone know how to read the settings contained in a .pst file? I found some that I really like, but would like to know what they are doing. In other words, what are the different used FX and what are their settings? I would use some other users have created as a starting point to create my own channels of FX. Open in a text editor doesn't show something like:

  @^@^@D^@^A^A^@^@^@^@^KEMAGPPST^@^@^A^H^@^@^@^@Âp^@^@^@^@^@^@^@^@^@^@^@^@^@^@¿< 80 > ^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @? < 80 > ^ @^ @@ ^ @^ @^ @

  Is there a way to show somehow what they do and what they use the settings?

  Thank you!

  You're right, the settings file contain only of the code when opened in a text editor.

  But why don't you just open settings in a project, this way of seeing exactly what Plugins are loaded. Opening of the plug-in window will show you their parameters.

  The only restriction is that GarageBand has only a limited view of Plugin window which can not show all settings. To do this you must open in Logic Pro X.

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Is there a way to repair a movie?

  Added a dialog to a movie that was properly recorded in a file previously, but now it won't open. Is there a way to 'fix' a movie?

  I'm not sure I understand. Which, in my opinion, you say that you have added a voice over a clip in your movie and it played ok but after have closed and reopened iMovie movie is fine but voice over does not play. He will play in the project media browser?