Push the details of notifications: 'Number of devices' and 'sent devices' metric

Similar Questions

• Notifications of events generated and sent to EWS counts for TMSXE

  Hello world

  My account of EWS has been installed for TMSXE receives notifications of events planning and trying to find a way to turn it off.  When I go to system-> Notification of events and for the TMSXE account management, it is not configured to receive any notifications.  Yet, it does.

  If I add notifications for other events (for example start-up), the account TMSXE receives e-mails for charging machines, as well as planning events.

  It seems that TMS is stuck with the idea that it is to send this information to the TMSXE account.  What is a behavior of the integration of the Exchange with TMSXE?  Can it be disabled?

  Thank you

  Shawn

  Hey

  It happens that if you enable the user tmsxe as 'User integration Exchange' there is a checkbox if you change the user. Just uncheck it. This setting will be deleted in a future of tms versions because it is no longer used.

  / Magnus

  Sent by Cisco Support technique iPhone App

• I bought my laptop in 2009 and have the paperwork. Was supposed to receive and be upgraded to winndsows 7 but never received this notification and have always Yes paperwork to prove it.

  I bought my laptop in 2009 and have the paperwork. Was supposed to receive and be upgraded to winndsows 7 but never received this notification and have always Yes paperwork to prove it. It was just 3 months before windows 7 came out.

  Sorry, the offer ended two years ago. The free upgrade was offered from the manufacturer of the computer.

  I heard that if you buy Vista you get a copy of Windows 7 free
  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010. Manufacturers can choose to offer the option for a shorter period on the details of their PCs. offer, price, and delivery upgrade methods will vary.

• Replicate data on the next page with number of fixed fields in the Layout

  Here is a delicate question. I have a report that generates a kind of detailed report Master. This report will print on a pre-printed form.
  
  1 1/3 of the Page is dedicated to logos and company information.
  2. second part 1/3 of the page is dedicated to the information of the customer (name, address, Phone/Fax details)
  3. last part 1/3 of the page is the detail that can accommodate up to 4 lines. In this section, there are individual fields for 4 lines. The goal is to show up to 4 cases in detail, and if there are more records read from the cursor (more than 4), then I need to print the header section again since it's the same client and detailed reviews starting in the folder number 9 followed by 17 and so on.
  
  I am populating the header and the detail in a column records form and not in the main query. The main request is quite simple, it is fair to all customers based on a ZIP Code. This is why, there is only one group of repetition and all elements (Master record) and the detailed reports (which are basically different fields placed one under another) are part of the same repeating group. They are populated in a column formula and not a request.
  
  That said, it's a very heavy way to adopt this approach? The report already exists in this State and I need to make some changes and this function I'm talking about would be a big jump.
  
  Thank you
  
  Published by: Roxyrollers on August 2, 2012 15:18
  
  Published by: Roxyrollers on August 2, 2012 15:41

  1 1/3 of the Page is dedicated to logos and company information.
  2. second part 1/3 of the page is dedicated to the information of the customer (name, address, Phone/Fax details)

  Select Print on all pages... - for the 2 above

• My CSS box doesn't seem to push the text of the road

  Hi guys,.
  
  Have a look here
  
  I have just managed to get boxes CSS working on my site and you will see have applied to the right of a number of pages and added the links. I looked the site locally and online last night from my machine and everything seemed to work as expected.
  
  However, I just had to work and had a look at some of the pages and the text box is not A - did not seem enough to surround all of the linked text and B extended - pushed the text surrounding the road enough so now there is a horrible overlap that going on.
  
  If I set the height of the box properties to something like 150 (can't quite remem) I guess that's what is originally A and B? So, how then set the properties of the box so that it will shorten or extend according to the amount of text that I put in - just leave blank the field height property?
  
  I hope you can help guys!
  
  Let me know if you need more information.
  
  See you soon,.
  James

  JamesFryer wrote:
  So, how I can set the
  > Properties dialog so that it will reduce or extend according to the amount of text
  > I put inside the it - just leave the height property area in white?

  Yes. The answer is to never set the height of a box that contains text
  (unless its for a scrolling region). Leave the amount of text in the box of
  determine the height.

• Update of the detail block

  Hello
  
  I have 3 blocks on my form for example something like order number, line number and the quantity ordered. Order number is master block and line number is it's detail & line number is a master of order of quantity as is the detail. Line number and the quantity ordered cannot update or insert on.
  
  I set up so that when I ask order number, it gives different numbers of line and the quantity associated with the number of the line.
  
  for example
  
  Order number 2020222787972
  
  Number of line 1
  2
  3
  
  Quantity ordered 45
  
  where 45 is the quantity ordered for the line number 1.
  
  I want to be able to double-click on a different line number and when I do it has the quantity ordered of update to take account of the quantity ordered for the line number with this order number, but I don't know how to write the trigger to do this.
  
  Could someone offer any help?
  
  Thank you much much in advance,
  
  Published by: user6549864 on October 17, 2008 01:01

  Assume that the lines are in block SUMMARY summary field id and block ONLINE

  You can do the following:

  :SUMMARY.QUANTITYITEM:=:LINE.QUANTITYITEM;
  

  places in a WHEN-MOUSE-DOUBLE-CLICK-trigger on the line to block works when doubleclicking, placed in a TIMES-NEWS-RECORD-INSTANCE-trigger is change when navuigating to the specific line. In the case of showing during navigation, it would be still more senseful to place the point summary point in block PAY directly and set "no property of elements poster"1 and set article summarized as mirror-element for the original amount column

  hope this helps

• pay with paypal without going into the details in the form of Fund BC

  We are trying to reduce barriers for our clients on the Fund.

  Currently on our order page that the user would still have to fill in all their details, and then select "paypal" as their method of payment, then transfer them to paypal in order to fill the box, connect or fill in their details again, then return to our site.

  I can see if someone has implemented a solution where a customer can jump directly on paypal if that's the method of payment that they would prefer to use without having to enter their details in the form of registration of order?

  Is it still possible?

  If I simply ignore the js form validation if their method of payment is paypal I am currently getting:

  ERROR: An error has occurred. Your web form should capture customer name and email address. Fix this problem and reinsert your web form on your web page.

  See you soon

  Pat

  
  

  Hey Pat,

  I don't think it can be done in British Colombia. BC needs to know which order site

  comes as a result of the IPN. If you disable javascript on the

  registration form before you submit and then send the form, you will have

  see that BC will take you to a blank page after the presentation. But if you

  Look at the source of the blank page, you will see that there is a hidden form

  on it, which gets presented by javascript. This is because who POST at

  PayPal must come within the client browser or otherwise, how do you

  Send a customer to PayPal with a post request.

  But anyway, take a look at this form BC submits. If you can somehow get the

  Command ID and some other stuff that BC sends to paypal, you may get it

  work. He did years that I watched this. I don't know if BC will be

  able to capture the NPI post, enter the details of PayPal sends in return and

  Store them on the agenda. It's something that you need to test.

  See you soon,.

  M

  The game, July 30, 2015 11:40, Patrick-W [email protected]>

• Disable the button new add tab CSS specifications of the trade while displaying the Notification number GTIN message duplicate

  Hi Ron,

  I need to disable the Add button again in the CSS tab on specification of the trade while displaying the Notification number GTIN message duplicate.

  If it does not duplicate notification displayed GTIN message not necessary to disable the Add button again in the CSS tab. Please see the screen shot for more information.

  You said same thing as below mentioned in bold.

  2. you can lock whole sectors, such as the CSS section, you use an extension called SectionLevelEditing. You can read about it in the Guide of extensibility, which will guide you to a more detailed document.

  If you are wanting to keep lock editable, but section towards the bottom/remove the button Add a new one just so you can use the UIe feature Extensions, also documented in the extensibility Guide.

  As suggested, I had crossed the SectionLevelEditing document. but I don't get anything in the document.

  Even my requirement is condition based on the button Add a new on the CSS tab.

  I tried another way

  (1) I got to add new button id with developer tools (ctl01_CtlInitialPublication1_ctlCollapsibleContentContainer_ctl00_btnAddNew)

  (2) what properties should be used by pulling the new id button.

  I am faced with the question. Please let me know some suggestions.

  Thank you

  Floquet

  In the JavaScript code, could you try to filter by some special keywords in your notification of duplicate instead of code GTIN number # .writing C NET.

  In user interface Extensions, it has only allowed to extend the JavaScript code.

• Did not push the file control point (no space available on the device)

  Hello

  I use Proliat HP DL 380 G5.  8 GB (RAM) 61 GB of space

  (RAID0 + 1) second HARD drive has failed while working on a HARD drive at the moment...

  After 20-25 minutes, I can't ping my VM OS which is Windows 7 (active)... and events, I see this error...
  Did not push the file checkpoint at 05:00 (no space available on the device).

  Details of the event:
  	Type: error Description: Error message on WINDOWS-PRTG on localhost.localdomain ha-Datacenter: impossible to reach 5.3 GB of file control point: no space is available on the device. Time: 09/12/2015-10:05:31
  Error stack:
  	Did not push the file checkpoint at 05:00 (no space available on the device). Failed to prepare the file ' / vmfs/volumes/56653def-ccd90fc3-0a42-001b783701ae/WINDOWS-PRTG/./WINDOWS-PRTG-f1e094f5.vmem ': 28 (no space available on the device). An error occurred during registration: 28 (no space available on the device). Impossible to suspend the virtual machine: msg.suspend.error.SUSPEND_E_NOSPACE.
  Additional event details:
  	Type ID: error Build host: 3029758 Target object Type: ComputeResource Type of data center: data center The host object type: HostSystem VirtualMachine object type: VirtualMachine ChainId: 201

  Could you help me solve this problem?

  Thanks in advance

  * Note * I found the solution... Before I used the system of virtualization and Citrix (XENSERVER) there was little different. That's why I'm stuck on a few easy steps... Well, the problem was that I use 61GB HDD, 5.5 GB of memory. When I create the VM I "ve used the maximum size of HARD drive and left no space for the SWAP file. I used 58 GB, and you have to assume + memory size, this means, 58 GB + 5.5 GB...   So who is right for which I didn't have enough space. Hopefully someone will find it useful. See you soon,.

• Need to disable CGI, I have two-factor authentication, but I don't have the phone number or device with me. What can I do?

  Need to disable CGI, I have two-factor authentication, but I don't have the phone number or device with me. What can I do?

  For Apple ID - Apple Support two-factor authentication

  If I can not connect, how I again to access my account?

  If you can't sign in, reset your password, or receive verification codes, you can account recovery application to restore access to your account. Account recovery is an automatic process designed to help you back into your account as soon as possible while denying access to anyone who might be impersonating you. It may take a few days - or more - depending on the specific account information, you provide to verify your identity.

  It will be your option. If you try to find an iPhone with locking Activation that you don't remember the password, you can remove the account from the iPhone with the help of Apple's Support with the receipt of the initial purchase of the iPhone as a way to prove that you are the real owner of this iPhone.

• Where is the detail on the 10 devices listed on my iTunes account?

  How can I get detailed information on all 10 devices listed on my iTunes account?  The current descriptions are so imprecise, that I can't say what devices are w

  It should not be vague, but depends also on the details that you're talking about. It should show what device and the current battery charge, but the unit must be connected to your computer.

  Try the instructions here > locate and view your device in iTunes - Apple Support

• Windows Explorer; Size of folder and the number of files does not appear on the Details view.

  When navigating through Windows Explorer, it is apparently not available to display the file size or the number of files without looking at the properties of the specific folder.

  Is it possible to have a sub-category that can display * file size * and * file Count * in a tree of files so that its more fast walk a tree longer?

  Thank you

  You can point to the folder to see the size, but not the details can show it as questioning the disc for all of these values causes the massive shift (especially in a corporate network, the traffic generated by the query can bring down a network).

  The method of scoring looks like this:

  

• Windows could not connect to the System Event Notification service. As an administrator, you can view the log of the events system for more details

  Original title:

  Office blocked in the classic theme.

  This morning when I started my computer, I noticed that it displays the following error message:

  "Windows cannot connect to the System Event Notification Service service. This problem prevents limited users to logon to the system. As long as administrator, you can review the system the event log for more details on the reasons, the service has not responded. »

  I went through the event log and found three errors:

  Name of the error: Service Control Manager
  Event ID: 7022

  "The Windows Audio service hung on starting."

  Name of the error: Application Popup

  Event ID: 875

  "Pilot atksgt.sys has been blocked by a load."

  Name of the error: Service Control Manager

  Event ID: 7000

  "Atksgt service failed to start due to the following error:
  This driver has been blocked by a load.

  There is no new hardware or installed software, virus/malware analyses provided no results. The only effect I can see is that the office is stuck in classic mode and options for the Aero themes are disabled.

  Any help is appreciated.

  I would like to use system restore to set up Windows in a few days.

• 'Blackberry Internet Browsing Service' to push the service on device with BES

  Hi, expert, from this link: http://supportforums.blackberry.com/t5/BlackBerry-Push-Development/Push-registration-returns-rc-1000..., we have the Service book called 'Blackberry Internet Browsing Service' or 'BIS-B '. In service to push page, I saw that too.

  It worried me a little. Let's support our agent for device with BES with Push using the blackberry infrastructure. "Blackberry Internet Browsing Service" will still be available for the device associated with BES? If this isn't the case, it would be great forced to use infrastructure Blackberry push service.  I tesed on my device that is associated with a BES, but I'm not sure it will work for all cases. Any confirm on that?

  Pushing to BES only devices is done via the Server BES not BIS push server. This is why companies like the solution BlackBerry because they control their own devices and have the option to only allow the 3rd third party to interact with devices. Some companies allow BIS books on device of service and others not - his company policy.

• Questions of blackBerry Smartphones pushing the mobile CRM application to the BB 8830 devices

  I have problems getting an application to install on the BlackBerry devices used throughout our society.

  I am using BB 8830 (OS 4.5) devices on the network of Verizon Wireless and collaborated with BlackBerry Manager v4.1 on our BES. I'm trying to push a mobile CRM software application for these devices using a Software Configuration implemented in the BlackBerry Manager. I have successfully pushed an old version of this app for these devices in the past using other Config software. I did the following before trying to get the app:

  1. installation of the portable software on the BES.

  2. has created a folder under %CommonProgramFiles%\Research-en Motion\Shared\Applications to hold .cod files .alx files and APP then their copied in the folder.

  3 created the software index by running loader.exe /index from the command prompt.

  4. about control and strategies COMPUTER was preconfigured for older software config, we used successfully, then we have the same ones used when creating the configuration of the software for this mobile CRM software

  5 assigned a COMPUTER policy to users that allows the software to install on their devices

  6. check that all BlackBerry Services associated with this process are running

  When I would assign the software to the user and then select deploy Application, it would immediately act as though the software has been installed on the device showing the Application as being up to date and the Config like OK. The it policy gets well positioned on the device, but no application appears.

  Can someone help me understand what Miss me, and why the app is never pushed?

  Figured it out. There is a setting on the server that has always acted as if the previous version of the application has been installed, even if it has been removed from the device. Weird, but once I deleted that setting, it allowed me to get the new application.