Push the work stoppages until the re-installation of application

Similar Questions

• Problem with push the screen of an application

  Hello

  I developed an application with another point of entry. I have the main GUI application and an application that listens for push notifications. The background listener auto starts when the unit is turned on and tuned to push. When it receives the push message, it displays a popupscreen with the options 'launch' and 'Cancel '. By pressing 'start' should open the graphical application by pressing the main screen of the application. However, I get "ClassCastException" and I have no idea why.

  I looked around and the process is similar to what I did, but somehow, it does not work for me. Can someone explain or show me how to push a background application screen?

  See you soon!

  Welcome to the forums!

  I guess as you push a display context global [and maybe modal] 'launch' and 'Cancel' buttons. When you press 'start', then, you should not just push a screen - you should actually run the main application!

  To do this, you must create an application with the appropriate settings and say ApplicationManager descriptor to run it. Take a look at the documentation ApplicationManager, especially the section "running an application with different arguments. Make sure the arguments are according to the needs of your main application, not the bottom one.

  Only one problem: what happens if your application is already running but reduced? Don't worry - you try to run the same application with the same arguments will activate one already running!

  Good luck!

• Drag and drop work stoppages until the computer restarts

  We are experiencing a problem on some machines (Windows 7 SP1 64 bit) where slide - déposer ceases to function in all applications.

  For example, in Windows Explorer, you can initiate the drag, but when you release the mouse button to make the 'drop' the drag image/icon remains right on the screen.  Once you press the ESC operation key drag is cancelled and slide it image/icon disappears.

  There seems to be a sequence of actions in various applications as the user doest that tests the problem.  Even after closing all applications and even restarting Windows Explorer, disconnect and reconnect the mouse, the problem persists.  A reboot seems to be necessary to solve the problem.  We cannot identify any resource that is used as memory, GDI and user handles objects, etc., to the top.   Windows Process Monitor and Process Explorer have not ben useful.

  Do we know if there are a few key resources being locked that prevents drag it / move to fill?

  Actually figured this out in part.  It seems to be related to an application that has been hanging mouse events and leaving the passage of events in a bad state of a certain type.

• Push the response time of application assessment Service

  Hello

  How long it takes to receive the credentials for the assessment of the Push function?

  I did a request 3 days ago and has not received anything yet.

  Thank you

  I just got the credentials if the answer is about 3 days :-).

• Touchpad does not work after the new installation of windows 8.1

  Hi, I have a hp envy sleekbook m6 model. in any case since I installed windows 8.1 cool my touchpad works until a point. Ill install the driver and it works fine until I have shut down the laptop computer, then restart. IM pretty sure that the driver is updated automatically and does not properly. Any help would be greatly appreciated.

  My model: HP ENVY m6-k010dx

  Hello again loplop8989l,

  Thanks for the quick response!

  Since you are able to use your TouchPad before restarting your computer, I recommend that you follow this document on How to perform a boot in Windows. This should help

  If the problem persists, I suggest to restore your system to a restore point when you first install the drivers for your TouchPad. To do this, please follow this document on using Microsoft System Restore (Windows 8).

  Once you have restored your system to when the pilots first TouchPad installation, please follow this resource on how to activate the update or disable automatic so only with the help of HP Support Assistant (Windows 8). This should help to disable automatic updates and check to see what firmware to download individually. Please install each update individually, taking note of update causes incompatibility of software with your TouchPad.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• My repertoire is not now responsible to the vehicle (VW Golf GTI MY08 with BT fiscon system) all work fine until I received the watch

  Hi all, very much has been said about the Apple Watch and the changes it makes or should I say priority, she resumed vehicle Bluetooth system.

  Since owning the Apple Watch I have has problems of Bluetooth, more with my directory does not not upward. All other functions appear to work correctly. My repertoire is not now responsible to the vehicle (VW Golf GTI MY08 with BT fiscon system) all work fine until I received the watch.

  Counsel there or just wait for an update?

  I look forward to hear from you

  < re-titled by host >

  The issues raised in your vehicle only persist when your watch is paired / with you in the car?

  I suspect either a material limitation / bandwidth here, or perhaps a software update for BT to your car system may be necessary.

• I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... its

  I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... says not compatible... it is activated in Add ons... nothing has been put to day or changedf suddenly just no toolbar and it will not tie

  RoboForm will probably have an update for Firefox 30 when Firefox 30 is actually out, if not sooner. No need to turn off the automatic updates now.

• Can I remove the 10.6 and bootcamp or windows still work with previous 10.11 installation?

  I have an early 2009 mac mini, 10.6 installed bootcamp at the same time on the hard drive. Have windows 7 installed on bootcamp.

  Recently, I removed the CD - RW drive and put in an SSD. I then installed 10.11 on this drive and use it as the startup of the operating system. I noticed that I can run applications that has been installed to 10.6, Autocad 2013 being a.

  What I would do is make hard drive on the old hard drive space by removing the 10.6. I can do this without destroying the current installation of bootcamp and windows 7 install?

  Due to the limited space on the SSD drive, after removing 10.6 I want to update my old applications and install less 10.11 but actually during the installation, install the actual application on the old hard drive files. Of course I know that it works, as stated above and previous experience.

  Fundamental question needs to be able to always use bootcamp and windows 7 install I have now, even after the removal of 10.6. Is this possible?

  Once Windows is installed (W7 in your case), it is autonomous. But it is very sensitive to partitioning of the changes/resizing efforts.

  If you want to keep the old Applications (10.6) intact and on the old disk, but use the 10.11 on the SSD, the only space you get in return is at the heart of 10.6 OS. It is usually 16 to 32GB.

  If you have verified that each of your applications is fully functional under 10.11, backup Applications on an external drive and erase only 10.6 partition. Create a reader of 'Fusion' between the SSD and the old HARD drive 10.6 and then drag Applications from the external drive in the Fusion drive application. It will also give you performance SSD for your Applications, rather than leave it on the HARD drive part that will slow them down.

• Satellite L300 - external screen works fine until the Windows login

  Hello world

  I am trying to use an external display with my Toshiba Satellite L300 and it works up until I have to Log in Windows (or in Ubuntu just had the same problem).

  At this point, the laptop does not seem to recognize the external display more and jump using the internal screen again.

  It might be relevant: I'm using dual boot Win XP and Ubuntu Hardy.
  The problem occurs in both systems.

  Someone knows how to fix this?

  user111

  Maybe the resolution is set too high?

  Try a lower resolution and an update of the BIOS.

• 5210 kodak printer, when I print the document runs through the printer, but nothing prints, suggestions. worked fine until today after a move

  everything looks ok, but when I print the paper passes through the printer but nothing prints, suggestions. worked fine until today after a move

  Check with Kodak support or website to see if there's a test or a diagnostic process that you can run to identify the problem with the printer.  It is not likely to be a problem of Windows at this point.

• Error "the HP Installer has stopped working" in Windows 7

  I have a hp deskjet printer 1660.  I downloaded the driver to install it on my Acer laptop several times but I can't seem to reach the stage of extraction.  Its extracts but then no window opens later.  I have a Windows 7 operating system, which can make?   Can firewalls or else be interrupting the driver installation?

  OK Antonio99 after doing some work that you told me about the processor, I found the answer and now my printer prints.  It turns out that I had to install a patch, whatever that is.  Here is the link for instructions, I followed

  http://support.HP.com/us-en/document/c02073861

  Thank you for your interest and your help.

  Greetings from Bahamas

• iTunes won't uninstall on my XP Professional version 2002. I get an error message that says that the Windows Installer does not work.

  Original title: itunes won't uninstall on my XP Professional version 2002.

  iTunes won't uninstall on my XP Professional version 2002.  I tried to delete all files from apple and it will let me delete the Apple software update.  I get an error MOUSSOKI that says that Windows Setup does not work.  What should I do?

  Hello

  Run the tool fixit in the following article and check:

  Diagnose and solve the program installation and uninstallation problems automatically

• I put the e-mail shortcut key to open Gmail, but it turns into Hotmail whenever I start my computer. I go to options and it is on Gmail, I click on it but do not change it and it works fine until I restart. That is what it is? Thank you!

  I put the e-mail shortcut key to open Gmail, but it turns into Hotmail whenever I start my computer. I go to options and it is on Gmail.  I click on it but do not change it and it works fine until I restart. Everything else works fine. That is what it is? Thank you!

  gezer2u,

  Try to record your username, then back in then try to restart your computer and see if the problem still persists.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• My Windows Installer does not work. Msg I get: the Windows Installer Service could not be accessed.

  Can't install or uninstall I get this msg.  The Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly. Contact your support team. HELP please.

  Hello Monica and DuaneWolfe,.
   
  
  Thanks for posting in the Microsoft Community. I understand that the Windows Installer does not work on the computer windows vista. I also noticed that there is another thread of yours, with the same question, and the thread was answered by Yaqub K August 30, 2012.
  
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-the-Windows-Installer-service-could-not-be/354c393e-CCCA-42AD-9952-4aa70bfdb336
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest you to consult the help article mentioned in this thread and let us know the status of the issue.

  
  Please avoid creating threads in duplicate on the same issue. You can reply to this thread if you need help and I'll be more than happy to help you.

• I can't get my updates. the Windows Installer does not work how to fix it

  I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?

  http://support.Microsoft.com/kb/2438651#reso1

  See the above article, I suggest you use not Fixit, but it's your choice.

  For manually fixit it you follow the steps in the resolution.

  fyip