put an end to a queue

I copied the code for this post: http://zone.ni.com/devzone/cda/epd/p/id/1959, however, the vi is an older version of Labview.

Above all, 'not a queue vi', is no longer available at least in the 2009 version. So how do I end the while loop once the last item is out.

This is the block diagram of the site OR:

It's my own emulation using the 2009 version, as you can see, the while loop there is a function "not a queue vi", which I cannot find in the 2009 version.

I even tried the number of items in the queue of the waiting state Get vi '= 0', then wired the output at the terminal stop, but also had a wiring error.

Hi ade.

You must check the cluster of error (which you should do anyway in a good program...)! (You chose one of the examples written for LV6 or even older, which should be updated by EITHER sooner or later...)

When you release the queue, it is incorrect to the EEG of reference. The GetQueueStatus feature then gives you an error that you can analyze. Complete your error ('invalid reference') looping...

Tags: NI Software

Similar Questions

  • Error: Put an end to this cluster node due to unrecoverable service failure

    Our group had some kind of fault which appeared only today. The origin seems to have been almost a month ago, but the symptoms have shown barely.

    The node in question is a stand-alone instance running a DistributedCache service with local storage. It produces the following to standard output the Jan-22:

    Coherence < error >: put an end to this cluster node due to unrecoverable service failure

    It has definitely failed today with OutOfMemoryError: Java heap space.

    We lack consistency - 3.5.2.jar.

    Q1: Looks like this node failed on Jan - 22 and yet we have not noticed. What is the best way to monitor the status of the node?
    Q2: What could be the root cause of such a mistake?

    I found the following in the log:

    2011-01-22 01:18:58, 296 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:18:58.296/9910749.462 Oracle coherence EE 3.5.2/463 < error > (thread = Cluster, Member = 33): attempt to retrieve (due to soft timeout) guard {Daemon = DistributedCache}
    2011-01-22 01:18:58, 296 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:18:58.296/9910749.462 Oracle coherence EE 3.5.2/463 < error > (thread = Cluster, Member = 33): attempt to retrieve (due to soft timeout) guard {Daemon = DistributedCache}
    2011-01-22 01:19:04, 772 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:04.772/9910755.938 Oracle coherence EE 3.5.2/463 < error > (thread = Cluster, Member = 33): termination monitored running (due to hard timeout) guard {Daemon = DistributedCache}
    2011-01-22 01:19:04, 772 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:04.772/9910755.938 Oracle coherence EE 3.5.2/463 < error > (thread = Cluster, Member = 33): termination monitored running (due to hard timeout) guard {Daemon = DistributedCache}
    2011-01-22 01:19:05, 785 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:05.785/9910756.951 Oracle coherence EE 3.5.2/463 < error > (thread = thin wire, Member = 33): Full Thread Dump

    Thread [reference Manager 10, System]
    java.lang.Object.wait (Native Method)
    java.lang.Object.wait(Object.java:485)
    java.lang.ref.Reference$ ReferenceHandler.run (Reference.java:116)

    Thread [DistributedCache, 5, Cluster]
    java.nio.Bits.copyToByteArray (Native Method)
    java.nio.DirectByteBuffer.get(DirectByteBuffer.java:224)
    com.tangosol.io.nio.ByteBufferInputStream.read(ByteBufferInputStream.java:123)
    java.io.DataInputStream.readFully(DataInputStream.java:178)
    java.io.DataInputStream.readFully(DataInputStream.java:152)
    com.tangosol.util.Binary.readExternal(Binary.java:1066)
    com.tangosol.util.Binary. < init > (Binary.java:183)
    com.tangosol.io.nio.BinaryMap$ Block.readValue (BinaryMap.java:4304)
    com.tangosol.io.nio.BinaryMap$ Block.getValue (BinaryMap.java:4130)
    com.tangosol.io.nio.BinaryMap.get(BinaryMap.java:377)
    com.tangosol.io.nio.BinaryMapStore.load(BinaryMapStore.java:64)
    com.tangosol.net.cache.SerializationPagedCache$ WrapperBinaryStore.load (SerializationPagedCache.java:1547)
    com.tangosol.net.cache.SerializationPagedCache$ PagedBinaryStore.load (SerializationPagedCache.java:1097)
    com.tangosol.net.cache.SerializationMap.get(SerializationMap.java:121)
    com.tangosol.net.cache.SerializationPagedCache.get(SerializationPagedCache.java:247)
    com.tangosol.net.cache.AbstractSerializationCache$ 1.getOldValue(AbstractSerializationCache.java:315)
    com.tangosol.net.cache.OverflowMap$ Status.registerBackEvent (OverflowMap.java:4210)
    com.tangosol.net.cache.OverflowMap.onBackEvent(OverflowMap.java:2316)
    com.tangosol.net.cache.OverflowMap$ BackMapListener.onMapEvent (OverflowMap.java:4544)
    com.tangosol.util.MultiplexingMapListener.entryDeleted(MultiplexingMapListener.java:49)
    com.tangosol.util.MapEvent.dispatch(MapEvent.java:214)
    com.tangosol.util.MapEvent.dispatch(MapEvent.java:166)
    com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
    com.tangosol.net.cache.AbstractSerializationCache.dispatchEvent(AbstractSerializationCache.java:338)
    com.tangosol.net.cache.AbstractSerializationCache.dispatchPendingEvent(AbstractSerializationCache.java:321)
    com.tangosol.net.cache.AbstractSerializationCache.removeBlind(AbstractSerializationCache.java:155)
    com.tangosol.net.cache.SerializationPagedCache.removeBlind(SerializationPagedCache.java:348)
    com.tangosol.util.AbstractKeyBasedMap$ KeySet.remove (AbstractKeyBasedMap.java:556)
    com.tangosol.net.cache.OverflowMap.removeInternal(OverflowMap.java:1299)
    com.tangosol.net.cache.OverflowMap.remove(OverflowMap.java:380)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ Storage.clear (DistributedCache.CDB:24)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onClearRequest(DistributedCache.CDB:32)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ClearRequest.run (DistributedCache.CDB:1)
    com.tangosol.coherence.component.net.message.requestMessage.DistributedCacheRequest.onReceived(DistributedCacheRequest.CDB:12)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
    java.lang.Thread.run(Thread.java:619)

    Thread [finalizer, 8, System]
    java.lang.Object.wait (Native Method)
    java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
    java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
    java.lang.ref.Finalizer$ FinalizerThread.run (Finalizer.java:159)

    Thread [PacketReceiver, 7, Cluster]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketReceiver.onWait(PacketReceiver.CDB:2)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [RMI TCP Accept 0, 5, System]
    java.net.PlainSocketImpl.socketAccept (Native Method)
    java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
    java.net.ServerSocket.implAccept(ServerSocket.java:453)
    java.net.ServerSocket.accept(ServerSocket.java:421)
    sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.executeAcceptLoop (TCPTransport.java:369)
    sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.run (TCPTransport.java:341)
    java.lang.Thread.run(Thread.java:619)

    Thread [PacketSpeaker, 8, Cluster]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.queue.ConcurrentQueue.waitForEntry(ConcurrentQueue.CDB:16)
    com.tangosol.coherence.component.util.queue.ConcurrentQueue.remove(ConcurrentQueue.CDB:7)
    com.tangosol.coherence.component.util.Queue.remove(Queue.CDB:1)
    com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketSpeaker.onNotify(PacketSpeaker.CDB:62)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
    java.lang.Thread.run(Thread.java:619)

    Thread[logger@9216774 3.5.2/463,3,main]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [PacketListener1, 8, Cluster]
    java.net.PlainDatagramSocketImpl.receive0 (Native Method)
    java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
    java.net.DatagramSocket.receive(DatagramSocket.java:712)
    com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
    com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
    com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
    java.lang.Thread.run(Thread.java:619)

    Thread [main, 5, main]
    java.lang.Object.wait (Native Method)
    com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:79)
    com.networkfleet.cacheserver.Launcher.main(Launcher.java:122)

    Thread [dispatcher Signal, 9, System]

    Thread [RMI TCP Accept-41006, 5, System]
    java.net.PlainSocketImpl.socketAccept (Native Method)
    java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
    java.net.ServerSocket.implAccept(ServerSocket.java:453)
    java.net.ServerSocket.accept(ServerSocket.java:421)
    sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.executeAcceptLoop (TCPTransport.java:369)
    sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.run (TCPTransport.java:341)
    java.lang.Thread.run(Thread.java:619)

    Cluster thread
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [TcpRingListener, 6, Cluster]
    java.net.PlainSocketImpl.socketAccept (Native Method)
    java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
    java.net.ServerSocket.implAccept(ServerSocket.java:453)
    java.net.ServerSocket.accept(ServerSocket.java:421)
    com.tangosol.coherence.component.net.socket.TcpSocketAccepter.accept(TcpSocketAccepter.CDB:18)
    com.tangosol.coherence.component.util.daemon.TcpRingListener.acceptConnection(TcpRingListener.CDB:10)
    com.tangosol.coherence.component.util.daemon.TcpRingListener.onNotify(TcpRingListener.CDB:9)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
    java.lang.Thread.run(Thread.java:619)

    Thread [PacketPublisher, 6, Cluster]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.onWait(PacketPublisher.CDB:2)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [RMI TCP Accept 0, 5, System]
    java.net.PlainSocketImpl.socketAccept (Native Method)
    java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
    java.net.ServerSocket.implAccept(ServerSocket.java:453)
    java.net.ServerSocket.accept(ServerSocket.java:421)
    sun.management.jmxremote.LocalRMIServerSocketFactory$ 1.accept(LocalRMIServerSocketFactory.java:34)
    sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.executeAcceptLoop (TCPTransport.java:369)
    sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.run (TCPTransport.java:341)
    java.lang.Thread.run(Thread.java:619)

    Thread [PacketListenerN, 8, Cluster]
    java.net.PlainDatagramSocketImpl.receive0 (Native Method)
    java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
    java.net.DatagramSocket.receive(DatagramSocket.java:712)
    com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
    com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
    com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
    java.lang.Thread.run(Thread.java:619)

    Thread [Invocation: management, 5, Cluster]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [DistributedCache:PofDistributedCache, 5, Cluster]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [Invocation: management: EventDispatcher, 5, Cluster]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.daemon.queueProcessor.Service$ EventDispatcher.onWait (Service.CDB:7)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [Thread termination, 5, Cluster]
    java.lang.Thread.dumpThreads (Native Method)
    java.lang.Thread.getAllStackTraces(Thread.java:1487)
    sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:597)
    com.tangosol.net.GuardSupport.logStackTraces(GuardSupport.java:791)
    com.tangosol.coherence.component.net.Cluster.onServiceFailed(Cluster.CDB:5)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$ Guard.terminate (Grid.CDB:17)
    com.tangosol.net.GuardSupport$ 2.run(GuardSupport.java:652)
    java.lang.Thread.run(Thread.java:619)

    2011-01-22 01:19:05, 785 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:05.785/9910756.951 Oracle coherence EE 3.5.2/463 < error > (thread = thin wire, Member = 33): Full Thread Dump

    Thread [reference Manager 10, System]
    java.lang.Object.wait (Native Method)
    java.lang.Object.wait(Object.java:485)
    java.lang.ref.Reference$ ReferenceHandler.run (Reference.java:116)

    Thread [DistributedCache, 5, Cluster]
    java.nio.Bits.copyToByteArray (Native Method)
    java.nio.DirectByteBuffer.get(DirectByteBuffer.java:224)
    com.tangosol.io.nio.ByteBufferInputStream.read(ByteBufferInputStream.java:123)
    java.io.DataInputStream.readFully(DataInputStream.java:178)
    java.io.DataInputStream.readFully(DataInputStream.java:152)
    com.tangosol.util.Binary.readExternal(Binary.java:1066)
    com.tangosol.util.Binary. < init > (Binary.java:183)
    com.tangosol.io.nio.BinaryMap$ Block.readValue (BinaryMap.java:4304)
    com.tangosol.io.nio.BinaryMap$ Block.getValue (BinaryMap.java:4130)
    com.tangosol.io.nio.BinaryMap.get(BinaryMap.java:377)
    com.tangosol.io.nio.BinaryMapStore.load(BinaryMapStore.java:64)
    com.tangosol.net.cache.SerializationPagedCache$ WrapperBinaryStore.load (SerializationPagedCache.java:1547)
    com.tangosol.net.cache.SerializationPagedCache$ PagedBinaryStore.load (SerializationPagedCache.java:1097)
    com.tangosol.net.cache.SerializationMap.get(SerializationMap.java:121)
    com.tangosol.net.cache.SerializationPagedCache.get(SerializationPagedCache.java:247)
    com.tangosol.net.cache.AbstractSerializationCache$ 1.getOldValue(AbstractSerializationCache.java:315)
    com.tangosol.net.cache.OverflowMap$ Status.registerBackEvent (OverflowMap.java:4210)
    com.tangosol.net.cache.OverflowMap.onBackEvent(OverflowMap.java:2316)
    com.tangosol.net.cache.OverflowMap$ BackMapListener.onMapEvent (OverflowMap.java:4544)
    com.tangosol.util.MultiplexingMapListener.entryDeleted(MultiplexingMapListener.java:49)
    com.tangosol.util.MapEvent.dispatch(MapEvent.java:214)
    com.tangosol.util.MapEvent.dispatch(MapEvent.java:166)
    com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
    com.tangosol.net.cache.AbstractSerializationCache.dispatchEvent(AbstractSerializationCache.java:338)
    com.tangosol.net.cache.AbstractSerializationCache.dispatchPendingEvent(AbstractSerializationCache.java:321)
    com.tangosol.net.cache.AbstractSerializationCache.removeBlind(AbstractSerializationCache.java:155)
    com.tangosol.net.cache.SerializationPagedCache.removeBlind(SerializationPagedCache.java:348)
    com.tangosol.util.AbstractKeyBasedMap$ KeySet.remove (AbstractKeyBasedMap.java:556)
    com.tangosol.net.cache.OverflowMap.removeInternal(OverflowMap.java:1299)
    com.tangosol.net.cache.OverflowMap.remove(OverflowMap.java:380)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ Storage.clear (DistributedCache.CDB:24)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onClearRequest(DistributedCache.CDB:32)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ClearRequest.run (DistributedCache.CDB:1)
    com.tangosol.coherence.component.net.message.requestMessage.DistributedCacheRequest.onReceived(DistributedCacheRequest.CDB:12)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
    java.lang.Thread.run(Thread.java:619)

    Thread [finalizer, 8, System]
    java.lang.Object.wait (Native Method)
    java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
    java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
    java.lang.ref.Finalizer$ FinalizerThread.run (Finalizer.java:159)

    Thread [PacketReceiver, 7, Cluster]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketReceiver.onWait(PacketReceiver.CDB:2)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [RMI TCP Accept 0, 5, System]
    java.net.PlainSocketImpl.socketAccept (Native Method)
    java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
    java.net.ServerSocket.implAccept(ServerSocket.java:453)
    java.net.ServerSocket.accept(ServerSocket.java:421)
    sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.executeAcceptLoop (TCPTransport.java:369)
    sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.run (TCPTransport.java:341)
    java.lang.Thread.run(Thread.java:619)

    Thread [PacketSpeaker, 8, Cluster]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.queue.ConcurrentQueue.waitForEntry(ConcurrentQueue.CDB:16)
    com.tangosol.coherence.component.util.queue.ConcurrentQueue.remove(ConcurrentQueue.CDB:7)
    com.tangosol.coherence.component.util.Queue.remove(Queue.CDB:1)
    com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketSpeaker.onNotify(PacketSpeaker.CDB:62)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
    java.lang.Thread.run(Thread.java:619)

    Thread[logger@9216774 3.5.2/463,3,main]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [PacketListener1, 8, Cluster]
    java.net.PlainDatagramSocketImpl.receive0 (Native Method)
    java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
    java.net.DatagramSocket.receive(DatagramSocket.java:712)
    com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
    com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
    com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
    java.lang.Thread.run(Thread.java:619)

    Thread [main, 5, main]
    java.lang.Object.wait (Native Method)
    com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:79)
    com.networkfleet.cacheserver.Launcher.main(Launcher.java:122)

    Thread [dispatcher Signal, 9, System]

    Thread [RMI TCP Accept-41006, 5, System]
    java.net.PlainSocketImpl.socketAccept (Native Method)
    java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
    java.net.ServerSocket.implAccept(ServerSocket.java:453)
    java.net.ServerSocket.accept(ServerSocket.java:421)
    sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.executeAcceptLoop (TCPTransport.java:369)
    sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.run (TCPTransport.java:341)
    java.lang.Thread.run(Thread.java:619)

    Cluster thread
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [TcpRingListener, 6, Cluster]
    java.net.PlainSocketImpl.socketAccept (Native Method)
    java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
    java.net.ServerSocket.implAccept(ServerSocket.java:453)
    java.net.ServerSocket.accept(ServerSocket.java:421)
    com.tangosol.coherence.component.net.socket.TcpSocketAccepter.accept(TcpSocketAccepter.CDB:18)
    com.tangosol.coherence.component.util.daemon.TcpRingListener.acceptConnection(TcpRingListener.CDB:10)
    com.tangosol.coherence.component.util.daemon.TcpRingListener.onNotify(TcpRingListener.CDB:9)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
    java.lang.Thread.run(Thread.java:619)

    Thread [PacketPublisher, 6, Cluster]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.onWait(PacketPublisher.CDB:2)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [RMI TCP Accept 0, 5, System]
    java.net.PlainSocketImpl.socketAccept (Native Method)
    java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
    java.net.ServerSocket.implAccept(ServerSocket.java:453)
    java.net.ServerSocket.accept(ServerSocket.java:421)
    sun.management.jmxremote.LocalRMIServerSocketFactory$ 1.accept(LocalRMIServerSocketFactory.java:34)
    sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.executeAcceptLoop (TCPTransport.java:369)
    sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.run (TCPTransport.java:341)
    java.lang.Thread.run(Thread.java:619)

    Thread [PacketListenerN, 8, Cluster]
    java.net.PlainDatagramSocketImpl.receive0 (Native Method)
    java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
    java.net.DatagramSocket.receive(DatagramSocket.java:712)
    com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
    com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
    com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
    java.lang.Thread.run(Thread.java:619)

    Thread [Invocation: management, 5, Cluster]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [DistributedCache:PofDistributedCache, 5, Cluster]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [Invocation: management: EventDispatcher, 5, Cluster]
    java.lang.Object.wait (Native Method)
    com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
    com.tangosol.coherence.component.util.daemon.queueProcessor.Service$ EventDispatcher.onWait (Service.CDB:7)
    com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
    java.lang.Thread.run(Thread.java:619)

    Thread [Thread termination, 5, Cluster]
    java.lang.Thread.dumpThreads (Native Method)
    java.lang.Thread.getAllStackTraces(Thread.java:1487)
    sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:597)
    com.tangosol.net.GuardSupport.logStackTraces(GuardSupport.java:791)
    com.tangosol.coherence.component.net.Cluster.onServiceFailed(Cluster.CDB:5)
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$ Guard.terminate (Grid.CDB:17)
    com.tangosol.net.GuardSupport$ 2.run(GuardSupport.java:652)
    java.lang.Thread.run(Thread.java:619)

    2011-01-22 01:19:06, 738 consistency Logger@9216774 3.5.2/463 INFO 2011-01-22 01:19:06.738/9910757.904 Oracle coherence EE 3.5.2/463 < Info > (thread = main, Member = 33): Restarting Service: DistributedCache
    2011-01-22 01:19:06, 738 consistency Logger@9216774 3.5.2/463 INFO 2011-01-22 01:19:06.738/9910757.904 Oracle coherence EE 3.5.2/463 < Info > (thread = main, Member = 33): Restarting Service: DistributedCache
    2011-01-22 01:19:06, 738 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:06.738/9910757.904 Oracle coherence EE < error > 3.5.2/463 (thread = main, Member = 33): could not restart services: java.lang.IllegalStateException: failed to unregister: Distr
    butedCache {Name = DistributedCache State = (SERVICE_STARTED), LocalStorage = active, PartitionCount = 257, BackupCount = 1, AssignedPartitions = 16, BackupPartitions = 16}
    2011-01-22 01:19:06, 738 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:06.738/9910757.904 Oracle coherence EE < error > 3.5.2/463 (thread = main, Member = 33): could not restart services: java.lang.IllegalStateException: failed to unregister: Distr
    butedCache {Name = DistributedCache State = (SERVICE_STARTED), LocalStorage = active, PartitionCount = 257, BackupCount = 1, AssignedPartitions = 16, BackupPartitions = 16}

    Hello

    It seems that the problem is in this case the call to clear() which will attempt to load all the entries stored in the overflow system to emit events of cache to the listeners. Probably, this requires much more memory, there are lots of Java available, so the OOM.

    Our recommendation in that case is to call destroy() as this will bypass the same shot.

    / Charlie

  • How to put an end to my monthly storage iCloud - iPad

    I want to put an end to my monthly storage iCloud on my iPad.  How do I do this without losing the photos, applications etc. that are already on the cloud?

    Rosalind

    Mmake that all your files are copied or synced to your computer. Then only unsubscribe icloud.

  • Cannot put an end to calls on Skype for WP 8.1

    Hi all

    I can't put an end to calls to fixed/mobile phones on Skype for WP 8.1.

    I have the touch screen and it just goes black (as it is in standby mode) while my finger is on it. Screen appears again when I remove my finger. Appeal does not end. The only way is the other person to end the call or me to turn off my phone.

    All solutions? Looks like a pretty major bug.

    Thank you

    Hey,.

    and thank you for your additional info/effort.

    After some research, we have learned that it is a problem experienced with the Lumia 630/635 and she's been fixed to WP8.1 update 1. Wp8.1 update 1 deployment was launched and it will come to the Lumia 630/635 so.

    You can check if it is available by going to settings-> check updates to phone for updates.

    BR

    Jake Kunnari

  • When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

    When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

    This has happened

    A few times a week

    is after update of Firefox 3.6.4

    I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

  • Some performances are not completed to help put an end to everything in the model of parallel processes

    Hello

    This question confued me recently, I would use a parallel process of model and to finish running at the same time.

    If there are action steps in order, it seemed that will put an end to the execution of all.

    However, I put a wait instead of steps of the action function, there are a few executions not interrupted while I pressed the button finish everything in the toolbar.

    Hope someone can give me help. Thank you very much.

    PS. the number of testsockets has the value 9 in my teststand.

    I ran your sequence again, and I have reproduced the issue.

    It seems the action of the polls Test for success/failure of the VI at full speed.

    It will consume your CPU resource to 100%.

    So I add some delay in the VI to prevent election full speed.

    Please see the following block diagram.

    I tried and it seems resolved the problem.

    Ting

  • Press any key to put an end to an exe BACKS run in system.exe VI

    Hi I am running some old programs exe based BACK.  Two programs that run one after the other, loop and redo (variables are modified for each loop) the first exe program requires the user to "press any key" to put an end (close window CMD.  When I start my VI using the sub - VI system.exe to run DOS programs I have to "Press any key" to close the window and leave my VI to continue a loop.  Or if I use the option 'Until the end', I find myself with a bunch of Windows CMD to close at the end.  There must be a simple way to "simulate a key shot" Plan B is to train a monkey to sit in front of the key board...

    I using Labview 2013 under windows XP / 7

    Thank you

    Check out this post.  If this does not work for you, you can try to use SendKey in a Powershell script.  Good luck.

    Full disclosure, I did none of these, can't vouch for their usefulness.

  • I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

    frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

    Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

    On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

    ``````~~~~`````

    In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

    In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

    It may be useful to eliminate equipment defects

    Type of memory in the search box of start and choose Memory diagnosis

    In a command prompt (type command in the start search box then right click and choose Run as administrator) type

    CHKDSK c: /r

    If you have more than one drive replace C: with the other drive letters.

    Search for corrupted files by typing at the command prompt

    sfc/scannow

    You can clean boot troubleshooting http://support.microsoft.com/kb/331796

  • Outlook Express error: 'your server suddenly put an end to the connection. Error: 10053 and error number: 0x800CCC0F. »

    original title: problems outlook express

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Object ", account: 'pop.windstream.net', server: 'smtp.windstream.net', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10053, error number: 0x800CCC0F

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: "pop.windstream.net', server: 'pop.windstream.net', Protocol: POP3, server response: '+ OK 3787 bytes', Port: 110, secure (SSL): no, error number: 0x800CCC0F

    There was a problem connecting to your e-mail server. Your password was rejected. Account: "pop.windstream.net" (1), server: 'pop.windstream.net', Protocol: POP3, server response: '-ERR user name or password.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

    Connect with your e-mail server. They know what is your password.

  • Cannot put an end to the programs

    Whenever a program crashes on my computer, and I try to put an end to this program, I can't do it.  It's as if the pane "end of program" also blocks.  So, I have to turn off the machine.  Anyone know what I can do?

    Instead of finding ways to put an end to the program when your computer crashes, I recommend you to understand why your computer is locking up and fix it in place.

    If turn you your machine (I guess than the power button), you will soon have a new post that looks like this:

    My system does not boot and I see a message like this:
    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

    Then someone will offer to you try to repair your system with KB307545 and which will not help you either.

    XP has a built-in mechanism that is designed only to help diagnose the locking systems, freeze or crash, and it is very useful.

    I suggest to use (that's what it is) after general troubleshooting basic steps are exhausted.

    You know - easy as questions... What is the program that is locked?

    I would also say everyone with blocking XP problems starting their own new topic so they can be worked separately, or this thread is going to be annoying quickly.

    Thankfully, I'm not a moderator (Fortunately, I don't have no control on the operation of this forum).

    Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

    Please provide additional information on your system:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a CD/DVD drive work?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    What you see you don't think you need to see?

    What do not you think that you should see?

    Fill in the blank: my system worked well until: _.

    Click Start, run and enter in the box:

    Msinfo32

    Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

    For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

    There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

    This will minimize back Q & A and eliminate guesswork.

    Perform scans for malware, and then fix any problems:

    Download, install, update and do a full scan with these free malware detection programs:

    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.

    They can be uninstalled later if you wish.

    Do, or do not. There is no test.

    I decided to implement the points for a new puppy instead of a pony!

  • Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

    You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.

    Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

    t-4-2

  • Error code: 0x800CCC0F, your server suddenly put an end to the connection when sending emails with attachments

    Original title: send Inbox problems

    If I attach a pdf file to my outgoing mail, it lies in the Outbox and will not send then I get an error message, send e-mails with no attactments is no problem

    If you have your anti-virus value analyze them, disable the e-mail scanning.
    It is redundant and doesn't interfere with the transmission, especially with Windows
    Mail.
     
    --
    Dave N.
    MS - MVP (Mail)
    Windows 7 Ultimate 64
    "wynnieboy" wrote in message
    News: * e-mail address is removed from the privacy... *
     
    After my rarlier question if I add an attachment to an e-mail, it will be
    do not send and this is the error message
     
    Your server suddenly put an end to the connection. Possible for causes
    It include server problems, network problems, or a long period of
    inactivity. 'A last try', account: 'imap.aol.com', server:
    'smtp.aol.com', Protocol: SMTP, Port: 465, secure (SSL): Yes, Socket error:
    10053, error number: 0x800CCC0F
     
     

    Windows 7 Ultimate 64

  • Disable "Do you want to put an end to this process?" pop up

    What is a necessity to do to eliminate that pop-up of the elimination of the unnecessary process (do you want to put an end to this process?) that anyone gets any time we use the Task Manager to remove a process? Do it!!

    I was unable to find a way to remove the warning message - I think that it is incorporated into the code.  I searched the registry and found no entry to complete the process and nothing meaningful for same Task Manager - so it must be controlled by a system file which, if we could find the same, cannot be changed by all the means available to us (which means that you or me or probably anyone outside the development of Microsoft).  I suspect that they put there to make sure that a process or service, or that is not finished by accident (which could cause the system to crash).  In fact, despite the annoyances (like you, I too would turn off if it were possible, because I am convinced that what I'm doing), I agree here because the consequences of a mistake can be severe, and too many people are not careful enough when you press the buttons.

    Then I tried to use another program, Process Explorer, http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx which is an improved version of the Task Manager. However, when I went to kill a process, I had again a confirmation warning message - if this isn't a way to bypass the confirmation message.

    Sorry if this isn't what you wanted to hear, but this confirmation message cannot be disabled.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • The application is not responding. The program can meet again if you wait. You want to put an end to this process

    Whenever logged on windows 7, I get the following message:

    "The application is not responding.  The program can meet again if you wait.
    Do you want to put an end to this process"with the choice of the end of the process and cancel.
    When I type complete the process the screen shows my wallpaper and not icons or the bar of windows at all. When I hit Cancel, the message of disappears for around one minute and shows up again.
    I can't use my phone at all in this way, so I hope you can help me.
    Sven

    Reboot the PC by using the F8 key at startup, this time select command prompt, and then follow the instructions for restoring the system;

    http://Windows.Microsoft.com/en-GB/Windows-Vista/Start-System-Restore-from-a-command-prompt

    Select a restore point to a period where it was all is OK

  • Your server suddenly put an end to the connection.

    I was trying to convey a "phishing" email my card company credit, they asked me to do, and I got this error message.  Now I can't send email. I am able to receive.  There is no ' sent' in Windows Mail 2012 I am able to delete the offending message.
    Here is the error message:
    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.
    Subject ' Fw: [bulk] notice alert - irregular activity map EXBEJVVWKK'
    Server: 'smtp.att.yahoo.com '.
    Windows Live Mail error ID: 0x800CCC0F
    Protocol: SMTP
    Port: 465
    Secure (SSL): Yes
    There is no ' sent' in Windows Mail 2012 I am able to find

    It is under the account folders in the folders pane:

Maybe you are looking for

  • HP-1272wm: Unlock Bios - 15 HP

    I'm trying to implement this laptop but cannot get bast a splash screen, asking an admin password. After three unssuccsefull attmpets of password, I get a window- System disabled [1 72054875] How should I proceed?

  • Lenovo Center's Solutions don't poster not updates to driver/BIOS?

    Hey all,. Got a new 55-H50 (AMD) and G50-45 today and updated everything, including the LSC. Desktop or portable LSC say to go to the Lenovo website for updates to the firmware/BIOS, and they both require BIOS at least. I can not really work if nothi

  • Windows Vista Home Premium freezes

    Whenever I start my computer, Windows Vista freezes up right away, or maybe after a few minutes or 20 mintues.  This problem occurs even in Safe Mode and safe mode with networking Mode.  Startup Repair doesn't accomplish anything.  Diskcheck can't fi

  • Error message: Wireless Communication has been disabled - HP OfficeJet 4620

    Hello I have a printer of HP OfficeJet 4620 network. All of a sudden the wireless light goes off, and whenever I try to turn it on by pressing the wireless button I get the followig message: "wireless communication has been disabled. Contact your net

  • objects vs C++ QML Dynamics

    normally I use ComponentDefinitions and create / destroy all my UI of QML, who works fast and easy. C++ only I use for business logic Sometimes I have to create a C++ user interface controls, in this case a sheet, because: If you use a spreadsheet wi