ACS RADIUS lost: 11051 RADIUS packet contains invalid state attribute

Similar Questions

• AAA ACS RADIUS ASA administrative access

  We have an ASA 8.2 we'd like to AAA to configure ssh access using a 5.5 running ACS RADIUS.

  Can get users authenticate, but ASA retains user record in user EXEC instead level privileged EXEC.

  Installation on the ASA:

  RADIUS protocol Server AAA rad-group1
  AAA-server host of rad-Group1 (inside_pd) rad-server-1
  key *.
  AAA-server host of rad-Group1 (inside_pd) rad-Server-2
  key *.
  authentication AAA ssh console LOCAL rad-group1
  AAA authentication telnet console LOCAL rad-group1
  HTTP authentication AAA console LOCAL rad-group1
  AAA authorization exec-authentication server

  Have you tried pushing various combinations of these attributes of the ACS:

  Value CVPN3000/ASA/PIX7.x-Priviledge-Level = 15
  Value of RADIUS-IETF Service-Type = administrative (6)
  Cisco-av-pair value = "" shell: priv-lvl = 15 ""

  Hi Phil,

  You are able to manage the privilege level is assigned to a user with Ganymede, however, you are not able to go to privilege level without enable authentication, unless you go to 9.1 (5) code.

• ACS RADIUS timeout with WLC 7.0 5.0

  Hi guys,.

  I'm setting up a device Cisco Secure ACS 1120 running 5.0.0.21 ACS to manage the RADIUS of a Cisco WLC 5508 device query running the 7.0.116.0 version.

  • These devices have open communication on all ports - no firewall or ACL
  • they have successful ping communication

  The following statements illustrate some but not all debugging I did to make sure that each device works properly in isolation.

  • Using the simple windows (radserv2.exe) instead of the Cisco ACS RADIUS server
    • This works and the WLC gets answer my fortune Server RADIUS
  • Using a simple windows EAP client to query the ACS using the RADIUS protocol
    • This works and the FAC processes the RADIUS request and sends a response
  • Placed a customer wireshark on the network to inspect the time-out.
    • Wireshark saves the package to the WLC for GBA using port 1812 but does not see responses to GBA package

  At the moment I have the

  1. WLC accepting wireless client association and
  2. sending the query RADIUS (EAP - TLS, PEAP and EAP-FAST) for GBA,
  3. the WLC receives no answer and generates a timeout message and separates the client.
     1. Note this is not a rejection or a similar message, the simple ACS does not even the package. i.e. There is absolutely nothing in the logs of ACS to suggest that he had even received a package of radius of the WLC.

  In summary the WLC and GBA properly operate independently, but they do not communicate via radius.

  Any help appreciated thanks

  It seems that you use ACS 5.0 without tasks.

  For your information, the version of the product is now up to 5.2 and 5.3 ACS should soon be released

  I recall there was a problem with ACS 5.0 with WLC operations that has been resolved in patch for 5.0

  I'm not sure of the specific CDETS but can be:

  CSCsy17858 Any manipulation of Tunnel-Type & Tunnel-Client-Endpoint uploading incorrect

  ACS 5.0 has a rollup with all the patches being accumulated approach

  My recommendation would be to download the patch 8 for ACS 5.0: 5.0.0.21.8

  Patch can be downloaded from CEC

  To install a patch set a repository on ACS (cumulative patches are larger than 32 MB, you can not use TFTP to it), copy the patch file in the repository, click ACS CLI:

  # acs patch installs repository

• I lost the toolbar that contains my favorite - where could I find

  I had to update my google and install the latest version and I lost the tool bar containing my favorites.

  Hello

  • Which toolbar you are making reference to?
  • What browser do you use?

  If this is google chrome, I suggest you to contact google support. Do follow link below:

  http://www.Google.com/support/

  If you are referring to Favorites in Internet Explorer:

   

  Favorites can be found at the followinng location

  \FavoritesUSERNAMEC:\Users\

   

• lost all the images contained in the "my pictures" file on the hard disk while using Windows Live Photo Gallery

  I lost all the images contained in the "my pictures" file on the hard drive.  The files are there but when I open the files they are all empty. It's like some 50 folders and each folder contained about 25 or so images jpg. I lost the using the "windows live photo gallery» I found a thread that someone else has had this problem and only one answer was to check the checkbox 'Show hidden files'. I have done this no luck there. When I open "windows live photo gallery" all records are on the left of the window but empty. I did not send any of these files to the "trash".  Can someone tell me how to recover these?

  You ran the scanner of MS too? It will take some time, but it must be done. If a virus is responsible for it must be nuked before he can ravage any more.

  Send all the pictures? You can still recover these - and get some help course in order to avoid this sort of thing. External hard drives and online storage are worth a small spending to protect valuable files. I also keep the dvd - outdated image files but enough fix if even they can deteriorate over time (but don't we all!)

  Let us know if the scan MS lands anything - run the full scan - it will take time.

  Best - R

• PL/SQL: ORA-00904: "CONTAINS": invalid identifier

  create or replace
  PF_SEARCH PACKAGE BODY
  IS
  
  PROCEDURE PF_QUICK_SEARCH
  (
  Help keyword VARCHAR2 DEFAULT NULL,
  locale VARCHAR2 DEFAULT NULL,
  VARCHAR2 DEFAULT NULL, catalogue
  VARCHAR2 NULL by DEFAULT, price list
  minCount INTEGER by DEFAULT 5,
  maxCount INTEGER by DEFAULT 1000,
  searchCount OUT INTEGER,
  categorySet OUT cursorType,
  productSet OUT cursorType
  )
  
  AS
  
  BEGIN
  
  SELECT count (*)
  IN searchCount
  OF dcs_pf_product_trans t1,.
  dcs_prd_prdinfo t2,
  dcs_price t3
  WHERE t1.product_id = t3.product_id
  AND t3.price_list = price list
  AND t2.product_id = t1.product_id
  AND (((CONTAINS(t1.product_id,searchWord,0) > 0
  OR CONTAINS (t1.manufacturer_part_number, searchWord, 1) > 0
  OR CONTAINS(t1.vendor_name,searchWord,2) > 0
  OR CONTAINS(t1.display_name,searchWord,3) > 0
  OR CONTAINS(t1.long_description,searchWord,4) > 0)
  AND t2.catalog_id = catalog)
  AND (t1.locale_id = local));
  
  
  
  
  IF searchCount < = minCount THEN
  OPEN for ProductSet
  SELECT t1.product_id
  OF dcs_pf_product_trans t1,.
  dcs_prd_prdinfo t2,
  dcs_price t3
  WHERE t1.product_id = t3.product_id
  AND t3.price_list = price list
  AND t2.product_id = t1.product_id
  AND (((CONTAINS(t1.product_id,searchWord,0) > 0
  OR CONTAINS (t1.manufacturer_part_number, searchWord, 1) > 0
  OR CONTAINS(t1.vendor_name,searchWord,2) > 0
  OR CONTAINS(t1.display_name,searchWord,3) > 0
  OR CONTAINS(t1.long_description,searchWord,4) > 0)
  AND t2.catalog_id = catalog)
  AND (t1.locale_id = local));
  
  ON THE OTHER
  IF searchCount > maxCount THEN
  OPEN for CategorySet
  SELECT DISTINCT t3.cat_lvl1_id, t3.cat_lvl2_id, t3.cat_lvl3_id
  OF dcs_pf_product_trans t1,.
  dcs_prd_prdinfo t2,
  dcs_pf_search_cat t3,
  dcs_price t4
  WHERE t1.product_id = t4.product_id
  AND t4.price_list = price list
  AND t2.product_id = t1.product_id
  AND (((CONTAINS(t1.product_id,searchWord,0) > 0
  OR CONTAINS (t1.manufacturer_part_number, searchWord, 1) > 0
  OR CONTAINS(t1.vendor_name,searchWord,2) > 0
  OR CONTAINS(t1.display_name,searchWord,3) > 0
  OR CONTAINS(t1.long_description,searchWord,4) > 0)
  AND t2.catalog_id = catalog)
  AND (t1.locale_id = local))
  AND t2.product_info_id = t3.product_info_id
  ORDER BY t3.cat_lvl1_id, t3.cat_lvl2_id, t3.cat_lvl3_id;
  
  ON THE OTHER
  
  OPEN for CategorySet
  SELECT DISTINCT t3.cat_lvl1_id, t3.cat_lvl2_id, t3.cat_lvl3_id
  OF dcs_pf_product_trans t1,.
  dcs_prd_prdinfo t2,
  dcs_pf_search_cat t3,
  dcs_price t4
  WHERE t1.product_id = t4.product_id
  AND t4.price_list = price list
  AND t2.product_id = t1.product_id
  AND (((CONTAINS(t1.product_id,searchWord,0) > 0
  OR CONTAINS (t1.manufacturer_part_number, searchWord, 1) > 0
  OR CONTAINS(t1.vendor_name,searchWord,2) > 0
  OR CONTAINS(t1.display_name,searchWord,3) > 0
  OR CONTAINS(t1.long_description,searchWord,4) > 0)
  AND t2.catalog_id = catalog)
  AND (t1.locale_id = local))
  AND t2.product_info_id = t3.product_info_id
  ORDER BY t3.cat_lvl1_id, t3.cat_lvl2_id, t3.cat_lvl3_id;
  
  
  OPEN for ProductSet
  SELECT t1.product_id
  OF dcs_pf_product_trans t1,.
  dcs_prd_prdinfo t2,
  dcs_price t3
  WHERE t1.product_id = t3.product_id
  AND t3.price_list = price list
  AND t2.product_id = t1.product_id
  AND (((CONTAINS(t1.product_id,searchWord,0) > 0
  OR CONTAINS (t1.manufacturer_part_number, searchWord, 1) > 0
  OR CONTAINS(t1.vendor_name,searchWord,2) > 0
  OR CONTAINS(t1.display_name,searchWord,3) > 0
  OR CONTAINS(t1.long_description,searchWord,4) > 0)
  AND t2.catalog_id = catalog)
  AND (t1.locale_id = local));
  
  END IF;
  END IF;
  
  END PF_QUICK_SEARCH;
  
  PROCEDURE PF_CATEGORY_SEARCH
  (
  Help keyword VARCHAR2 DEFAULT NULL,
  locale VARCHAR2 DEFAULT NULL,
  VARCHAR2 DEFAULT NULL, catalogue
  VARCHAR2 NULL by DEFAULT, price list
  parentCat VARCHAR2 DEFAULT NULL,
  productSet OUT cursorType
  )
  
  AS
  
  BEGIN
  
  OPEN for ProductSet
  SELECT t4.product_id
  OF dcs_pf_product_trans t1,.
  dcs_prd_prdinfo t2,
  dcs_price t3,
  dcs_product t4
  WHERE t1.product_id = t3.product_id
  AND t3.price_list = price list
  AND t2.product_id = t1.product_id
  AND (((CONTAINS(t1.product_id,searchWord,0) > 0
  OR CONTAINS (t1.manufacturer_part_number, searchWord, 1) > 0
  OR CONTAINS(t1.vendor_name,searchWord,2) > 0
  OR CONTAINS(t1.display_name,searchWord,3) > 0
  OR CONTAINS(t1.long_description,searchWord,4) > 0)
  AND t2.catalog_id = catalog)
  AND (t1.locale_id = local))
  AND t1.product_id = t4.product_id
  AND t4.parent_cat_id = parentCat;
  
  
  END PF_CATEGORY_SEARCH;
  
  PROCEDURE PF_GENERIC_FULL_SEARCH
  (
  SQLQuery VARCHAR2 DEFAULT NULL,
  sqlCountQuery VARCHAR2 DEFAULT NULL,
  categoryQuery VARCHAR2 DEFAULT NULL,
  minCount INTEGER by DEFAULT 5,
  maxCount INTEGER by DEFAULT 1000,
  count ON the WHOLE,
  countSet OUT cursorType,
  categorySet OUT cursorType,
  productSet OUT cursorType
  )
  AS
  
  searchCount INTEGER.
  
  BEGIN
  
  CountSet OPEN for sqlCountQuery;
  SEEK countSet INTO searchCount;
  County: = searchCount;
  
  IF searchCount < = minCount THEN
  ProductSet OPEN for sqlquery;
  ON THE OTHER
  IF searchCount > maxCount THEN
  CategorySet OPEN for categoryQuery;
  ON THE OTHER
  CategorySet OPEN for categoryQuery;
  ProductSet OPEN for sqlquery;
  END IF;
  END IF;
  
  END PF_GENERIC_FULL_SEARCH;
  
  PROCEDURE PF_GENERIC_PROD_SEARCH
  (
  SQLQuery VARCHAR2 DEFAULT NULL,
  productSet OUT cursorType
  )
  
  AS
  BEGIN
  ProductSet OPEN for sqlquery;
  
  END PF_GENERIC_PROD_SEARCH;
  
  END PF_SEARCH;
  ----------------------------------------
  
  Package body PFCA4. PF_SEARCH@US_DEV_WD1_PFCA4
  Error (22.2): PL/SQL: statement ignored
  Error (34.5): PL/SQL: ORA-00904: "CONTAINS": invalid identifier
  Error (43.5): PL/SQL: statement ignored
  Error (54.5): PL/SQL: ORA-00904: "CONTAINS": invalid identifier
  Error (61.7): PL/SQL: statement ignored
  Error (73,14): PL/SQL: ORA-00904: "CONTAINS": invalid identifier
  Error (82.7): PL/SQL: statement ignored
  Error (94,14): PL/SQL: ORA-00904: "CONTAINS": invalid identifier
  Error (102.6): PL/SQL: statement ignored
  Error (113.5): PL/SQL: ORA-00904: "CONTAINS": invalid identifier
  Error (137,5): PL/SQL: statement ignored
  Error (149,5): PL/SQL: ORA-00904: "CONTAINS": invalid identifier
  ---------------

  Think you that trying to do something like that?

  CONTAINS(t1.manufacturer_part_number,searchWord,1) > 0
  

  How would you do the same thing with INSTR or SIMILAR?

  select * from dual where instr('Test','st') > 0;
  select * from dual where 'ABCXD' like '%' || dummy || '%';
  

• Index entry contains invalid characters

  I inserted 11000 index markers in the text (laws in a book of business or great law) files, and import that they appear correctly in the index Panel. But when I want to generate the index, the dreaded message arrives:

  "The index could not be generated. One or more index entries contains invalid characters. Please remove all invalid characters from the index entries. »

  From what I've been able to collect discussions found elsewhere, this is sometimes caused by caractΦres inserted as separators etc. in the dialog box 'Generate the Index', but it's not those, I checked.

  Also, most of the entries are very similar (cases and articles) and I tried to generate an index with just a few pages of text containing the same type of entries, and then it works fine.

  Any suggestions?

  Make a copy of your document.

  Then, start cutting it upward. Remove half the story (or half of the pages). Problem still there?

  Remove the half once again? Repeat, repeat, repeat.

  Isolate the text at the origin of the problem.

  Perhaps begin by making sure it actually works with a single sentence, however.

• The NTVDM CPU has encountered an invalid statement

  I tried to fix this problem and I went "bleeping computer" and has not been able to solve.  When restarting a black screen and a pop-up message was on my screen. I briefly searched in google how to handle this, but I would like an answer of personlized more. Here is the info that was in the message:

  16-bit MS-DOS subsystem

  C:\Windows\system32\runonce.exe
  NTVDM CPU has encountered an invalid statement.
  CS:11f5 IP:0100 OP: ff d8 ff e1 00 choose 'Close' to end the application. "

  Also, I went into the Task Manager to close the message and there is something listed that seemed that there might be something to do with it.

  csrstub.exe - allows LUA launch 16-bit applications

  My computer also usually during start-up will go to a disk check, it goes through the process and restarts, but I never noticed a difference in the performance of the computer. My computer crashes also up and I have to restart manually, sometimes several times.

  I ran malwarebytes and it is clean, MiniToolBox deleted three things, run ESET scan and it was clean.

  I get occasional blue screens, sometimes they say 'bad pool head' but I don't know what that means.

  I had blue screens and I worked with someone online ran many scans and could not find any problems and suspect it is the hard drive. I was under warranty and I replaced the hard drive, but I always get blue screens. My windows updates are underway, all my programs are up to date.

  I don't know what to do with this problem. I really need help.

  Any help to fix this would be greatly appreciated. Thank you!

  Hello

  ·         You get a code of error with blue screen "bad pool head '?

  Follow these methods and check if that helps.

  Method 1:

  Step 1:

  Check if you have the similar problem in safe mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2:

  Follow the article to perform the clean boot on the computer:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

   

  Method 2:

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem still persists. To see how to the SFC Scan click on the link below and follow the steps in the Kb article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Follow the steps in the article, and check if that helps.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

   

   

  Method 4:

  A pool header problem is a problem with the allocation of memory for Windows. Device driver problems are probably the most common, but it can have various causes, including defective or other writing problems disc and problems with some routers. (In theory, RAM problems would be suspect for pool memory problems).

  If you have Windows Vista DVD you can try to run the Startup Repair and The Windows Memory Diagnostic tool to check and Windows Recovery mode if it helps.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Alternatively, you can use the command prompt on the recovery mode windows to perform analysis and error correction on a drive letter of your choice by running "chkdsk x:" where x is the letter of your drive. Type the below command on command prompt, and then press ENTER:

   

  X:\>chkdsk/f

  /F Corrects errors on the disk

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Package in an invalid state - compiles ok

  I created a package with 2 procedures. The package compiles correctly, no error found. My "SELECT * from object" shows the packet with INVALID = STATUS.
  
  If I try to call a procedure in the package says "ORA-06575 package or the function is in an invalid state.»
  
  I tried to recompile the package: 'ALTER PKAXINT COMPILE PACKAGE BODY', but nothing helped. And the essential point being that there is absolutely no error in compilation...

  Which tool you use to recompile the package... ?

  If you run following query you can see errors.

  SELECT *
  FROM user_errors
  WHERE name = 'Package Name';
  

• Application failure: invalid statement 4

  After upgrading to Mac OS Sierra, I get "4 the invalid statement" when running applications that worked on El Capitan (on MacBook Pro 2015). Different pages from 2009 indicate that the executable file runs a statement of unknown or not CPU supported. Other items show the incorrect return values. How is it possible for applications that work on the same machine under El Capitan?

  Y at - it new security / firewall app from Sierra which could cause this? Anyone else seeing this?

  Quote including "BREW" applications and programming tools (Haskell, cabal, maven)

  Have you checked to see if there are any available updates for applications that are giving you problems?

• I GET AN ERROR AFTER EACH UPDATE/MAINTENANCE OF THE GAME, CABAL ONLINE. ERROR MSG: 16-BIT subsystem "ERROR: NTVDM CPU has encountered an invalid statement." Close to terminate the program.

  I GET AN ERROR AFTER EACH UPDATE/MAINTENANCE OF THE GAME, CABAL ONLINE. ERROR MSG: 16-BIT subsystem "ERROR:"NTVDM CPU has met an invalid statement. " Close to terminate the program. "The file may be corrupt is either the update.exe from the game or the command.com in windows system32. This has happened before, and the only thing that I did to get the game back is to perform a system recovery (which im gona not remake). I want to know how to prevent the "update.exe" or command.com to be corrupted every update of the game. I tried to contact the manufacturer of the game, but they do not seem to respond immediately. and their forums are not as useful as I thought it would be. PLEASE HELP ME!

  fl0bot,
  The message you are getting means that there is some corrupt system files that could not be fixed.  If you look in the CBS.log file , it should tell you which files.  When you do that, you can try to replace the corrupt files.  However this seems to happen whenever you update it a game then you will need to contact their support for aid as this can be a problem for them.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• NTVDM CPU has encountered an invalid statement

  Please help me... i have an error message when I try to open the properties of my computer and dekstop

  c:\WINDOWS\system32\rundll32.exe
  the NTVDM CPU has encountered an invalid statement
  CS:0dcc IP:014E op: ff ff 00 6F 6B choose 'Close' to end the application

  Hi obyry,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• I get pop messages - up who say "NTVDM CPU has met an invalid statement.

  original title: svchost problems

  Why I get a pop up box that says svchost.exe CPU NTVDM encountered an invalid statement?

  Hi Chuck,

  There are several reasons why you may see this error message. Take a look at this thread to see if advice or troubleshooting help to solve your problem:
  http://social.msdn.Microsoft.com/forums/en-us/vssourcecontrol/thread/e5466e39-29b2-4667-96c4-6bacd8a397d4
  I hope this helps.

• Turbo c ++ error: NTVDM CPU has encountered an invalid statement

  every time I try to run TC in the bin folder, an error message appears:

  NTVDM CPU has encountered an invalid statement

  Click on close to terminate the program

  I, ve tried to reinstall TC.

  system configuration: windows XP SP3, 512 MB ram, 80 GB HDD, Pentium IV 1.8 Ghz

  These links should answer your question, I hope:

  http://social.msdn.Microsoft.com/forums/en/vssourcecontrol/thread/e5466e39-29b2-4667-96c4-6bacd8a397d4

  http://forums.techarena.in/Windows-XP-support/42112.htm

  http://www.TechSpot.com/VB/topic5039.html

  http://www.RealGeek.com/forums/NTVDM-CPU-has-encountered-an-illegal-instruction-44455.html

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.

• Continuous Windows\system32\wuauclt.exe pop up __16 bit subsystem MS-DOS error message: C:\Windows\system32\wuauclt.exe__The NTVDM CPU has encountered an invalid statement.

  have a couple of pop ups on my computer that appear every15 seconds or more. It is just an empty box with the title "Windows\system32\wuauclt.exe". Nothing in it. The other is a "16 bit MS-DOS subsystem" box with the following error message: "C:\Windows\system32\wuauclt.exe NTVDM CPU has met an invalid statement. CS:0000 IP:0077 OP:f0 37 05 02 0e choose 'Close' to end the application.

  When I choose 'close' or 'ignore' the windows go away but systematically re - appear about 15 seconds later. Now, I am just pass the windows out of the way and can use my computer like that.

  I ran scans on my computer but nothing was found.

  Since this problem started, my computer automated updates have not been installed. I understand that the above file has to do with automated updates. My Windows Update starts either in the Panel.

  I also had problems downloading the file exe running for installation on my computer since...

  Microsoft support directed me to this forum for help. Can anyone help?

  Hi Hibernatus,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. what happens when you try to start Windows update? You receive an error message?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  The question Windows Update make sure that services associated with the update of Windows running on the computer.

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Services window, double-click in the Background Intelligent Transfer Service.

  (d) under the tab general , under Startup type, click Manual, and then click apply.

  (e) click on the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (f) in the Services window, double-click the Windows Update service.

  (g) under the tab general , next to Startup type, make sure that Automatic is selected.

  (h) next to Service status, check to see if the drive is listed. If this is not the case, click pie S, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (i) in the Services window, double-click Cryptographic service.

  (j) under the tab general , next to Startup type, make sure that Automatic is selected.

  (k) next toservice status, check if the drive is listed. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (l) to close the Services window and try again to install updates to Windows.

  Also see the Microsoft article below if you use the Windows XP operating system.

  "16-bit MS-DOS subsystem" error message when you install a program

  http://support.Microsoft.com/kb/314452

  Error message when you install or start an MS-DOS-based program or 16 - bit Windows based

  http://support.Microsoft.com/kb/324767

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.