Put the new image into an existing project

Similar Questions

• Y at - it a simple method to move the new images in an album existing?

  I don't understand why it must be so difficult just to get a new image into an existing album! It seems to me that Adobe has created a simple workflow method to accomplish this simple task. After watching of many FAQ questions / answers, it looks like a number of people have asked the same question but also received a large number of responses of type "get around" to move the images in an existing album.

  For example, one method was to create a new album with a smilar name, then merge the album into existing 'main' album. There must be an easier way to get this done.

  Thank you.

  Happy to help you.

• Strategy to put the new 320 gig HD (Vista Ultimate) i in my Inspiron E1505?

  I chose XP - pro, when I bought my E1505 two years ago, but I knew I'd finally Vista so I made sure that the notebook had the necessary material.

  Well, that time is here now, and I decided that I put Vista on a new HD but keep my old 100 gig HD just as there are (under XP - pro)... just in case.

  So I acquired a new concert 320 HD caddy, a new copy under license of Vista Ultimate (with SP 1 including disc) and the Dell "Reinstall MediaDirect" DVD. Now I will download all the drviers of Dell Vista and put them on an external HD (and CD) so I'll have to their loan.

  I think it's all that I need (pls advise otherwise true) and, according to the Vista Upgrade Advisor, my Inspiron should be Ultimate without any problems.

  Here's my current strategy. I would like your comments.

  1. Put the new HD into the caddy and install
  2. Run the DVD in Dell MediaDirect
  3. Install Vista Ultimate
  4. Installation of SP1
  5. Install the drivers
  6. Reinstall the software (MS Office, Adobe, etc.)

  Seems nice and simple, so I'm probably missing something... Am I?

  JO

  
  

• I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture. How can I fix it?

  I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture.

  How can I fix it? Someone please help

  Hello

  What operating system do you use?

  If you are using windows 7, I suggest you to follow the link and set the picture on the screen of the link fill and check.

  Make changes to your desktop wallpaper slideshow

  http://Windows.Microsoft.com/en-us/Windows7/make-changes-to-your-desktop-background-slide-show

• I put the new version of paint on my XP?

  I put the new version of MS Paint on my current version of WINDOWS XP. Can you /.

  Hello, Gary SPierce,.

  No, you can't.  The latest version of paint is only for the latest version of Windows. Because the painting is integrated into the package of Windows you cannot uninstall and then install a more modern version.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Hello.. I've forgotten the answers to my security questions... I do not have the chance to remember the... What can I do now? No idea how delet old questions and put the new ones? PLEASEEE help me

  Hello.. I've forgotten the answers to my security questions... I do not have the chance to remember the... What can I do now? No idea how delet old questions and put the new ones? PLEASEEE help me

  Hello

  If you set an alternate e-mail address, you can reset your security questions. Follow the instructions here to check if this option is available:

  If you forgot the answers to your questions of security of Apple ID - Apple Support

  Otherwise, you will need to contact the Apple Support. The information is available here:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• 46YL863: change TV channels - delay before the new image appears

  Hope someone can advise me please on an "issue" that's appeared recently with my 46YL863 TV.
  I say 'problem' rather than problem in case it's something to do with my settings, which is the cause.

  When I change channels I notice that there is a delay of several seconds of the current image to the new. I narrowed down it to this happens only when you switch from a HD channel to a one SD card, or from a SD card on a HD.

  In these circumstances the screen will first black, then blue and after a couple more seconds the new image of the string will appear.
  Switch between HD or SD channels and the new image appears almost immediately.

  This happened before the last two days, so either a fault has developed or I changed a setting in some way.

  I tried other plugs of HDMI input and the situation is the same.
  Any suggestions please?

  Thank you.

  > I tried other plugs of HDMI input and the situation is the same.
  This means that you are using an external decoder which receives signals from TV?

• Add the new PS4100 to an existing group

  Hello

  anyone would be able to explain the process of adding a new table to an existing group, please?

  We have a new PS4100 which was delivered with the 7.0.15 Firmware but the Group has a range of PS4000 on Firmware 8.0.5.

  How can I upgrade the firmware on the new PS4100 before running the Setup utility?

  Thank you very much

  Tom

  Let the new Member to join an EMPTY pool as the "default" (its still a void in our environments) or create an and name the program installation or maintenance.

  If the table has joined this pool complete the configuration as Ports IP/network, RAID level and so on. I prefer a complete reconstruction and not a fast initialization, but it's your choice. Updated the FW and also check the FW drive.

  Try to ping the new IP addresses of existing hosts and if everything is OK, move member in your production area.

  Kind regards

  Joerg

• Die only lead to T3500 - can I put the new (soon to be OS drive) in the second slot?

  T3500 with single drive

  Windows 7 pro 64-bit

  Original Dell drive (Seagate) is dying, according to Seatools. Cannot get Seatools for DOS to boot so can not do follow-up proposed by Seatools.

  The disk OS must ALWAYS be in the first place?

  Or can I leave the player dying in the first slot and put the new in slot 2?

  I saved the player dying on a disc USB external, and done the checkdisk for several hours.

  New drive (WD) Acronis, so hopefully I can just clone the old drive to the new. But I could always use wise counsel on this part as well.

  You need not connect by USB disk. Connection to a free SATA port will be much faster. You need a cloning utility that you can put on a CD or a bootable flash drive, then just select the origin and destination drive.

• [3750 x] switch was able to start on the new image

  Hello

  I have updated the firmware of my switches 3750 x (19 switches in the Group 8 battery) with the new version. But 2 switches with a stack of 3 cannot take the last version. They are the same model, I do not understand why they cannot start on the new image.

  New version: 15.0 (2) SE7

  Old version: 12.2 (58) SE2

  Switches information

  17 switches that works

  WS-C3750X-24 15.0 (2) SE7 C3750E-UNIVERSALK9-M

  Revision number of the model: A0
  Motherboard revision number: A0
  Model number: WS-C3750X-24 t-S

  Of the 2Switches that does not work

  WS-C3750X-24 12.2 SE2 (58) C3750E-UNIVERSALK9-M

  Revision number of the model: A0
  Motherboard revision number: C0
  Model number: WS-C3750X-24 t-S

  It's the only different, I found between the 2 switches with all other switches,

  Loading images

  In step 1 it load the image, but it will not start and in the end, it loads the old image and boot top.

  Loading ' flash: c3750e-universalk9 - mz.150 - 2.SE7.bin "... @.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  @@@@@@@@@@...

  File "flash: c3750e-universalk9 - mz.150 - 2.SE7.bin ' unzipped and installed, point of entry: 0 x 3000
  execution of...

  "Loading Flash:/c3750e-universalk9-mz.122-58.SE2.bin"...@@@ ".

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  @@@@@@@@@@...

  The switch that has the latest version can not see the other 2 stacks. At the moment the only solution I found is the downgrade of the switch with version 15.

  Kind regards

  The latest version that starts with success on this device is 15.0 (1) SE3

  The 15.0 (2) * or 15.2. * the images do not start and lead the suspended device during the @ as stated above.

  So, it seems than Cisco already broken that in 2012. I almost can't believe it.

• How to load images into layers or project

  How to load images into layers or projects.  I know how to use open to open a picture, but I was looking for a way load an image to resize to fit in a specific part of a layer or load an image, then one more.

  Yes, a script would be best for what you want to do, but you might be able to do it with an action. I haven't used actions too because I prefer scripting.

• Addition of the new Image and text to an existing Page created with Tables

  Work in DW 5.5

  I try to add a new image/link and a small amount of text to an existing web page that was created with tables and centered.  I use AP div tags. One for the image and one for the text.  Everything works fine, but I can't get the new anchor points and to re - center with the rest of the page.  I'm not able to get around the "absolute positioning".  I tried different solutions of various tutorials but I can't make them work with tables.

  Added items are a Facebook button and text.

  Go to: http://www.sugarhollowfarms.NET/index.html See the problem.

  Help, please. I'm not that experienced.

  First, make a back up of the page before you implement the changes below!

  Take the bit of code below to

  ...... to..........

  and insert it directly after the opening tag div FWTableContainer and before your opening table tag (see location below):

  ">

  Join us
  

  on Facebook

  Then add - position: relative; -to the css of FWTableContainer (as shown below):

  {#FWTableContainer209091602}

  / * The div master to make sure that our contextual menus get properly aligned.  Be careful when you play with this one. */

  position: relative;

  margin: auto;

  Width: 800px;

  height: 600px;

  text-align: left;

  top: 20px;

  background-image: url(images/homepage_new3.jpg);

  border: medium solid #336600;

  position: relative;

  }

  Edit the css for FBlogo to as below:

  {#FBlogo}

  position: absolute;

  left: 700px;

  top: 380px;

  Width: 91px;

  z-index: 1;

  text-align: center;

  }

  Edit the css for bodytext as below:

  {.bodytext}

  do-family: Verdana, Arial, Helvetica, without serif.

  do-size: 11px;

  line-height: 13px;

  margin: 0;

  padding: 0;

  }

• How to integrate the htm files translated into an existing project?

  I work with RoboHelp HTML 7.03 and have inherited a webhelp project that was created with an earlier version (RoboHelp for Word 5.0 or an earlier version). Even before I had the chance to get wet feet and having never used before RoboHelp, asked me to send the project for the translation into French. Not knowing the files to send, I've zipped all and sent it. Translation company returned files htm, hhc and perfect.

  Now, my problem is how can I get these translated files in my project so that I can generate a system of online help that I can give to my developers?

  I read the article by Ben Minson and have tried to follow him with the project, I found myself with that. No chance! I read also elsewhere where people just made copies of their project and just drop the files translated into place and place the English files. I have not tried because I know exactly how to copy the project: copy to a new location or create a new project and copy the specific files from the old project?

  I would greatly appreciate help or advice I can get on this problem.

  Thanks in advance,

  Bill

  htm, hhc, and perfect files is usually exactly what needs to be translated.

  If that's what they delivered...

  -Make a copy of the English help, with Windows Explorer and rename the root folder, so that you can clearly see it's French project.

  -Check that the files in a folder structure that matches the original. If this is the case, copy the htm, hhc files and copied perfect helps the project.

  -Open the updated with RoboHelp help project. Check the settings of the project, under the file menu and change the necessary help to the French language. Verify that the default output is what you want (probably WebHelp).

  -Generating assistance.

  That should do it.

• Put the new email in the current folder

  By:

  Change | Accounts settings | (account). Copies & folders | "When sending messages, automatically:

  There is an option for the "responses of Place in the folder of the message being replied to.

  I would like a way to do exactly that, except with the answers, but with the new email I'm compose/send. It seems quite natural.

  For example, I have several clients and a folder for each client. When I answer to my customers, the answers come in appropriate customer records. Perfect. But when I write a new message to a client, is it not logical to also put this message in the folder of the respective customer? Instead, will all my mail sent to my "sent" folder, and I have to remember to fish out them and drag them into the respective customer records. It is a nuisance.

  I hope that it is already a feature. If this is not the case, this consider a request feature.

  This add-on makes it?

  https://addons.Mozilla.org/en-us/Thunderbird/addon/copy-sent-to-current/

  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

• Put the new upgrade of Windows 10 on my 500 gig SSD and make the main drive (C :)

  Original title: Windows 10

  You want to install (upgrade) new Windows 7 Pro 64) Windows 10.  No problem.

  Here's my question and need help.  I want to put the upgrade of Windows new 10 on my 500 gig SSD and make the main drive (C :)  Just got new PC and the SSD is not yet installed in the new machine.

  Is there a way to do this?  I can install the SSD drive in the pc without problems.  But the pc is set up with the C: drive in the primary.  As I understand it, the update will work, but it will not be for the SSD.

  Suggestions?  Is this possible?

  Windows 7 installation will have to be eliminated if its currently on a separate disk. Which means you have to start over.

  I would first disconnect the hard drive with your Windows 7 installation.

  Install the SSD drive, then install Windows Pro 10 on this subject.

  Download and create a bootable copy of Windows 10 Pro:

  How to download official Windows 10 ISO files

  Demarrer start from the installation media, and then select the SSD during installation:

  How to: perform a clean installation of Windows 10

  Reconnect the hard drive, then format the installation hard disk.

  Option to consider:

  Create an image of the installation of Windows 7 system restore it on SSD, and then upgrade to Windows 10.

  How to pass Windows 7 to a bigger hard drive - books...

  Disconnect the hard drive, connect the SSD drive, then restore image and then upgrade to Windows Pro 10

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Check out the YouTube video below:

  How to properly set up the SSD as boot drive and the HARD drive...