PWR turned SX50 HS. Screen only works for review...

Similar Questions

• Recently, I went to the Apple Store in Easton, because I broke my screen. After that I got my fixed screen it worked for a little while but now it does not meet my contact

  Recently, I went to the Apple Store in Easton, because I broke my screen. After I got my fixed screen, it worked for a little while but now it does not meet my contact, Apple is responsible for this and how do I get my screen works again?

  Take it back to the Apple Store. Repairs made by Apple retail stores are still covered by the warranty.

• Synchronize the dictionary of data with model only works for models imported?

  When I imported data dictionary model (file-> import-> data dictionary) then in relational model the two buttons "Synchronize Data with Model Dictionary" and "Synchronize model with Data Dictionary" works very well.
  
  But when I model created from scratch and I'm clicking on the buttons "Synchronize data dictionary with the model" or "Synchronize model with Data Dictionary" nothing happens.
  
  It works only for models imported?
  
  (Data model EA 3.3)

  Hello

  Yes, Synchronize only works for objects that were imported to the original (like Synchronize uses the information entered during the import to determine which database connection and the database object to compare to).

  If your model is not imported, you can achieve the same effect as follows:
  -Open the template in Data Modeler and also open the relevant physical model.
  -Do an Import of data dictionary, select the objects you want to compare with that.

  After the import phase, this will display the dialog box to compare, showing the differences between the objects imported from the database and your model.

  Note that if you intend to generate the DDL to update your database of the difference (as in "synchronize with Model Data Dictionary"), you must select the "Swap Target Model" option in step 2 (select database schema) data dictionary import wizard.

  David

• Problem dual screen ' after working for a while, the screen of my laptop turns off.

  Original title: Problem dual screen

  I use two screens (laptop screen and separate screen) to work. Windows 7 operating system. After working for a while, my laptop screen goes blank as if he goes to the standby mode. The monitor never goes out. Is - this cos win 7 does not support the spl double screen laptop computer and monitor at the time of amse?

  Support COMPUTER told me he can't stand not and laptops are not designed to function as a two screens? Please notify.

  KR

  bs3dm

  Portable computers support two monitors. The problem may be caused by two reasons:

  1. incorrect power setting.
  2. the problem with the drivers.
  1. you can download and open Microsoft Fix it for the question.
  2. update the display drivers. If no update is available, uninstall the drivers (and software), restart the PC, install the drivers (and software), restart the PC and then check.

• Flash player only works for a single user on the PC

  I'm running a PC with Windows XP and IE8 there are two accounts on the PC, one for me and one for my wife, we are both members of the Administrators group on the computer. It was that I installed everything on my account. Then he was asked to update Adobe once, the installation failed, and since it does not work on his account.

  I've been through the knowledge base and uninstalled using the Adobe cleaning tool. I haven't used any other third-party tool, although I use the microsoft file to clean the registry. I even went up to now as uninstall adobe all other relevant documents and turn off my Norton antivirus to do a reinstall.

  I do not have or that run the system only works antivirus.

  The flash drive installed large on my journal, like the installation of ActiveX. It worked great (for me) when my wife recorded it did not work. So I ran the Adobe clean uninstall once again and then tried to install my wifes log. Installed fine but adobe flash activeX will not settle, it fails to half way through.

  I then go to my login and it installs and works for me, but not on hers.

  Any ideas would be really helpful

  Thank you

  I had a similar problem except Flash worked on some sites on one account administrator and all sites on the other. After deleting Java and re - installing and removing the Flash and reinstalling still had the same problem on this account of an administrator.

  I then deleted the history of full navigation on the account that did not work and 'Bingo', it worked. Who knows? Don't know what actually helped but remove history solved the problem in the end. Sometimes the simplest things solve the problem?

• Control values defined by the Index function only works for a running VI?

  I've never used set of control values based on the Index before so I decided to compare it against two other ways to set the controls on the front panel, by using the invoke Ctrl.Val.Set node and nodes for the value property. But if the VI which I am trying to set the controls does not work I get error 1000 say "The VI isn't in a State compatible with this operation." When I run the VI which I am trying to set the controls, I get an error. This is VI really only work if the VI is running? I can't set the values before calling the VI to run dynamically?

  I wonder why you do so in the first place.

  a bit of history. This feature was added to the problem write to items in front by reference is about 1000 times slower than writing to the Terminal. I think that this feature works by writing directly to the transfer buffer. It always ends up by being slower than writing to the Terminal, but only about 10 times slower.

  My company made use of this new feature. We needed it because we have updated thousands of values of frontage on the same VI by reference and labview couldn't keep it up (Yes, probably could have worked around him in a different way, but there is more detail than this...). If your ' e does not update thousands of articles, probably you should not use this feature. Performance savings is not worth the additional development effort it takes.

  It does not work probably because the transfer buffer does not exist when the vi is not running

• How can I get Vista navigation pane to only work for a specific folder view?

  I am running Windows Vista classic folders. Significant irritation is that I want to have the navigation pane enabled for the _only_ in my computer/Windows Explorer folder. I don't want that it activated for other folders with groups of icons for programs.

  But I find that when I turn it on for the first folder, it becomes activated for all. On the other hand, if I turn it off for a program icon folder, it is disabled for all files, including the Windows Explorer.

  So, how to customize the navigation pane to make it work for a folder specific _only_?

  The other models are for music or photos or videos or Documents (and I can't remember the fifth).  They show the different columns and present different data sorted differently.  I don't think they will solve your problem.

  Some general information here is on models and how to set any records that might be of interest to you (but will not solve your problem, I think):

  Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show how to reset the display settings for the Windows File Explorer, disable Automatic folder Type Discovery (which is I think what you want)and increase the folder display the cache to make Vista do not forget the display settings, the folder type template, the size or the position of a specific window for when it was still closed to the location of specific path.

  It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program http://autosizer.en.softonic.com/ to resize them.

  Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

  Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)

  I hope this helps in your situation.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Envy Touch: Sound only works for about 1 hour after I restart. Then suddenly stops.

  Product: HP ENVY Sleekbook 4 t-1000 CTO

  Model: KD1A99UA #ABA

  Operating system: Windows 7

  When I restart my computer, my sound works for an hour or two and then suddenyl turns off. It does this with or without a helmet. It works again as soon as I restart the computer, but I would really do not have to restart my computer every hour just to get the sound to work.

  Also-download of Windows 8 is not an option because a large part of my work is incompatiable with windows 8

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  If the pesists of the problem, right click on the speaker icon in the taskbar, then select playback devices.  Right click 'Speakers and headphones' (or speakers/HP), and then select Properties.  Select the Advanced tab, and then remove the check box "allow applications to take exclusive control of this device."  Click apply and then click Ok to save this change.

  Restart the laptop.

  Kind regards

  DP - K

• the iPhone screen is not responding and only works for short periods of time when I use siri for an indefinite period.

  Then my phone 3 days ago started having a screen is unresponsive. I just found someone else who has the same problems as me. My screen is white and gray, flickering vertical lines at the top of my screen, sometimes extending to the bottom of the screen. My iPhone 6 s more screen shows only these lines when I use Siri for what it is, which is a little strange. To make things even more bizarre my screen becomes sensitive occasionally, but only when I'm talking about Siri for an indefinite period. One of the things I had in common with a question that someone asked who had similar problems that me was that, when these lines flickering, vertical, white and gray, the iPhone will eventually type things randomly on its own. Such as random apps or opening of the things randomly without my intervention. A unfortunate thing is that when this happens it selects things like that to end a call or facetime. I already know that the cost is $329 remedy since its considered as "other" in the apple repair options and I am also out of warranty, so I wanted to know if there is any other explanation for this. It made my phone very difficult to use these days now...

  Im going to guess that your phone is actually a 6 + and not a s 6 +, which means that your phone is suffering from simple plu epidemic of iPhones of all time - to the epidemic ic touch.  It is unrelated to Siri and tricks of the 'home', the lack of contact button that gets worse with time and flashing bars gray is the presentation of the default signature.  It's a failure level Council of integrated circuit chips that control touch and it is a design flaw in the jury of 6 + that Apple does not recognize.  You can send for microsoldering of the Board of Directors to resolve the underlying anomaly for half of the cost of your options at Apple--assuming that you are not interested in protecting your out of warranty at Apple options.

• Toshiba 32W2433DG auto stop signal only works for the analog TV

  I recently bought a 32W2433DG led TV.
  This TV has supposedly auto signal feature where if no signal is found for 15 minutes, the TV is supposed to go in standby mode.

  However, the only way I've seen this work, is if the TV is on analog TV.
  None of the other methods of entry, either digital like hdmi or analog as the SCART, don't trigger the minute 15 none of signal strength.

  Surely, this must be a bug in the firmware?

  I wouldn't mind this problem IF I could get the TV to go to 'snow' (the method of analog TV input) after having turned off my hdmi device, but unfortunately, it seems that want to switch to analog tv after using another entry SOMETIMES turn off a unit SCART.

  I also wouldn't mind, if the regular automatic power down when idle could be reduced by default 4 hours to say 1 hour.

  The file firmware would be somehow modded to allow energy standby more short time (run it via a hex editor?)?

  I don t think that the firmware could be modded or edited by joint customers of TV.
  If new firmware is available, you should be able to download the file from the Toshiba page: http://www.toshiba-om.net/firmware.php

• "Scan to computer" the printer only works for admins

  HP Officejet 6700, OS X Lion. Latest version of the software.

  Only admin users can scan the printer using the screen touch "Scan to Computer".  The non-admin users get communication errors. The computer is listed and after choosing works very well if the admin user is the active connection. But if a standard user is the current user, then it does not work. Scanning HP utility does not connect on the standard user account to "Activate the Scan of the computer". That translates into a communication error. But return to the admin, and it connects.

  Surely, it works in a context of user multi for non-admins. Do the other admin users is not an option.

  Standard users can use the HP scanning app on the computer, but the family loves the conveinence of the button "Scan of the computer. Its a nice feature. But seems broken.

  Fixed it! I just needed you to give me advice in the right direction. File on the file plist property seemed incorrect, so I changed to match the other hp plist file:

  iMac27:LaunchAgents pdivita$ ls-l * hp *.
  -rwxr-xr-x 1 pdivita admin 395 com.hp.devicemonitor.plist May 26, 2012
  -rwxr-xr-x 1 root wheel 673 com.hp.messagecenter.launcher.plist January 19, 2010
  iMac27:LaunchAgents pdivita$ sudo chown root: wheel com.hp.devicemonitor.plist
  Password:
  iMac27:LaunchAgents pdivita$ ls-l * hp *.
  -rwxr-xr-x 1 root wheel 395 com.hp.devicemonitor.plist May 26, 2012
  -rwxr-xr-x 1 root wheel 673 com.hp.messagecenter.launcher.plist January 19, 2010

  He now works in any account. Possible sound when I tried to fix my problem of no printing in January, one of the suggestions involved edit this file plist for HP Device monitor has not started, because it has been reported to cause problems in the past. Too bad repair disk permissions did not catch it. Thank you very much. Scan of the computer is a nice feature. (Although, the constant polling of devices HP monitor I see in the activity monitor always makes me nervous.)

• G7 Pavilion: Pavilion g7 keyboard only works for the password

  I was recently given a grandma g7 Pavilion.  She barely used.  The keyboard won't let me enter her password but completely stops working after the password is entered.  He may have had an external keyboard used previously, but is not fixed now.  I read on the forum and tried all the fixes I've seen.  I tried: disconnect the battery taking then now power button for 30 seconds, put the battery back and plug in the unit, turn on press the ESC key to make Bios restore default.  Left battery, instslled all the updates, uninstalled keyboard under devices and rebooted.  Tried the trick of screen ctrl and print.  He strives to enter the password, so it has the ability to work.  Very frustrating.  The keyboard icon returns to the settings but I can't click on it.  Help, please!

  Hello

  As the keyboard works until you connect, check the following.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the "ease of access Center.

  Select the option "make the keyboard easier to use".

  If there is a check mark next to 'Turn on filter keys', click the box to Remove , and then click apply and then click Ok to save this change.

  Kind regards

  DP - K

• AiO S40 - touch screen only works on the on-screen keyboard

  Machine has three months - IdeaCentre S40-40, 8.1 Windows, renovated, very few programs installed.

  The touch screen worked until now in each program the way it was assumed. But then the clicking has stopped working. So, only when you click, it does not. You can see on the desktop when you tap on the screen, the gray circle reacts to the amount of pressure on the screen.

  In Internet Explorer, for example, the works of scrolling, resizing (with two fingers) works, but isn't new by clicking on.

  If I open the keyboard on the screen, the keyboard works - you can actually click on the keys, and it does not. Nowhere else in Windows, it doesn't.

  Because I see some responses to touch, I don't think it's a hardware problem.

  I removed HID-touch in Device Manager and rebooted. Same result.

  I have disabled the service of keyboard on screen/touchscreen - same result.

  I reinstalled the driver of keyboard and mouse from Lenovo site - same result.

  I tried to calibrate the screen, but I can not because it does not yet meet the first, click on the cross.

  Any ideas anyone?

  Dear spidey101,

  Thank you for your response.

  Totally forgot to update the BIOS. That solved the problem and now the touchscreen works again without a hitch.

  Thank you once again!

• HP Pavilion dv6-black screen only works with the external monitor

  I discovered that my screen was not turn on yesterday when I tried to turn on my laptop. Fortunately I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I can not really be restricted to my living room or office to use my laptop.  Y at - it easy fixes to this, or is my only option to take it to someone with experience that replace the monitor for me?

  Hello

  Given the external screen display there are so few opportunities...

  -Sun display-project is a flashlight on the screen and check if you can see the bottom - if background is visible while it is the backlight in the LCD screen that needs to be replaced.

  - Display dark: if it is completely black and nothing is visible when you Flash light on the screen, then it is due to the LCD screen itself might be a broken screen (a cable that connects to the motherboard screen) or could be inverter LCD.

  If the laptop is still under warranty so I recommend you call HP tech support and they will be able to get it fixed for you.

• Satellite 1110 series only works for 12 seconds and then powers down

  We have several series of 1110 (Z14 and Z20) laptops and one of them fails to start correctly. Everything works perfectly for 12 seconds, and then it turns off. Each time at exactly 12 seconds.

  Does anyone have any suggestions where I should start looking?

  I've already replaced everything stands (up to the CPU), but without result. There seems to be something inside the motherboard BTK20.

  Thank you

  > There seems to be something inside the motherboard BTK20.

  Seems so if you replaced the common areas like RAM, HARD drive and the processor then the last part would be the motherboard

  But what do you think an overheating problem?
  I mean that the laptop could close because of the higher temperature
  I recommend to check this maybe the thermal grease should be renewed, clean the fans and check again