PX1237E HARD drive - 1 40 disconnects from the "Windows 2000 Server".

Similar Questions

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

  Original title: recovery of original windows 8

  When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

  Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

  Hello Vishal,

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

  See the suggestions posted by Andre Da Costa replied on March 7, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

  In addition to this, see:

  Product key lost or misplaced (certificate of authenticity) for Windows

  If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

  Hope this information was useful.

• Can't access the files from the HARD drive of any account on the windows computer 7

  Hello

  When I tried to connect my Western digital external hard drive to a 32-bit desktop P 3 with a Windows XP SP1, then this HARD drive is not detected. Then I tried to copy his WD driver ITS a USB Flash drive, then isntalled all the WD HARD drive was always plugged into my computer. After that, the HARD drive was identified by computer and appear in my computer. As I thought that this folder has been created by the installation of the driver, did not exist on my HARD drive before connected to the desktop computer.

  When I plugged my WD HDDagain to my laptop HP with Windows 7 SP1 64 bit and I tried open this folder, and then the main folder only opened without facing access denied, however, access to all of its subfolders, and the files inside it has been declined.

  In addition, althoguh the username admin Curernet "Mohammad" can open the folder of human "83f04ce083fb03083bb88e50", as shown in the screenshot above, it can not access all of the subfolders, files in the main folder, and to access, I will need to use the scecurity tab. Thus, it would be absolute nonsense, if I want to have access to all of the subfolders, I will need to use the security for each tab.

  How do I gain access to all of the subfolders with use of the Security tab once the time (i.e. as long as all subfolders are inside the main folder, then simply use the main folder security tab?

  

  As long as the current username "Mohammad" can open the folder of "83f04ce083fb03083bb88e50" man, "Mohammad" is so allowed system to have access to the main folder as shown in the screenshot above, then I think that the username 'Mohammad' will have to reach all subfolders as well. However, when you try to open any subfolder or file, then the current user 'Mohammad' name could not have access to all of the subfolders in the main folder and all subfolders or files opening gave me this error below (screenshots below)

  

  

  I tried to remove this main folder, however, each time, I found myself with a loop "you need permission SYSTEM to make changes to this file.

  

  Original title: file access denied

  Groan.  It is so easy to fix, and you should have gotten a lot better support now.  Surprisingly, the worst suggestion came directly from the "Microsoft Support Engineer" Reda Singh, his suggestion potentially compromising the security of your computer while doing absolutely nothing to solve the problem.  Fortunately, it seems like you didn't do something quite right and so the script was not run.

  First of all, let me explain why this difficult access occurs in the first place.  Originally, you had three 'users' granted access to training, SYSTEM, Administrators, and Mohammad.  SYSTEM allows Windows to read your disk, and retrieve things like its label.  It can also allow your antivirus software to access the drive.  Because this OPTION is enabled, Administrators is not accomplish anything, even if you are an administrator.  As long as this OPTION is enabled, this permission only works for programs, that you manually raised to run as administrator.  This leaves access to the drive depend on the last entry, Mohammad.  The problem is the SID behind Mohammad is only good on the computer, it was created, so if you connect this HARD drive on another computer, no access is allowed!  Enter the security on the other computer dialog box, you can either see something "could not read permissions" or you will see the SYSTEM, directorsand a third entry with a long series of numbers.  It's your first computer Mohammad , and it will not work on another computer.

  It is not surprising that you're facing this problem because you are using the drive on multiple computers, which is running XP that is not UAC.  Here's how to unlock a storage drive (in Windows 7) so that it can be normally accessed in any PC without any permissions problem:

  1. Press [Windows] (or click on the circles to start), and then type "user account control".
  2. In the search results, click on "change user account control settings."
  3. Drag the slider to "never notify".
  4. Click [OK] to confirm the changes and restart your computer.
  5. Open Windows Explorer, right-click on the affected drive, and then click Properties -> Security (tab)-> [Advanced]-> owner (tab)-> [change].
  6. You should be on a dialog box that asks what you want to change the owner.  Click on Administrators.
  7. Check Replace owner of subcontainers and objects, and click [OK].  Windows should start processing all the files on the disc.  This may take a few minutes.
  8. When it's done, click [OK] to close the property message and then close out of all other dialog boxes.
  9. In Windows Explorer, click the drive affected again, and then click Properties -> Security (tab)-> [Advanced]-> [edit permissions].
  10. Now in the dialog box Advanced security settings , click the button [delete] repeatedly to remove all permission entries.
  11. Add SYSTEM and grant full control.
      1. Click on [Add...].
      2. Type 'SYSTEM' and press [Enter].
      3. Check full control in the allow column and press [Enter].
  12. Add Administrators and grant full control.
  13. Add users and grant Full control.
  14. In the dialog box Advanced security settings , you should have three entrances of permissions: SYSTEM Administratorsand users, all granted full control.  Check "Replace all permissions of child object with permissions inheritable from this object" and click [OK].
  15. Click [Yes] to confirm the replacement of permissions.  Again, Windows start to process all files on the disk, which may take a few minutes.
  16. When he finishes, close to all the dialog boxes and check that all records are now accessible.  You may have to refresh (or close and reopen) explore to see the changes.
  17. Assuming that it worked, we will re-enable UAC to reduce the vulnerability of temporary security, that we created earlier.  Press [Windows] and then type 'user account control '.
  18. In the search results, click on "change user account control settings."
  19. Drag the slider to the position below the top (position #2, by default).
  20. Click [OK] and restart your computer.  Now, the files remain accessible.

  This should straighten the permissions of your disk storage so that you can use it again.  You may need to empty the trash on this drive after changing permissions.

  Don't do this procedure on your C:\ drive, it will seriously reduce the security of your Windows installation.  This is for the readers of storage only.  If you need access to a specific file that you created to C:\, you can safely do the steps above on this issue, but never on the C:\ drive itself.  Please note that when you perform this procedure on a folder instead of a hard drive, you will need to replace this step #10:

  10. now in the dialog box Advanced security settings , uncheck the box "Include permissions can be inherited from the parent to this object" and click [delete] to confirm.  If some permission entries remain, click [Remove] until they are all gone.

  The concept is the same in Windows Vista, even if the exact steps differ from the foregoing at least Windows 8.  In Windows 8, you must also disable UAC with a registry tweak because, unlike Windows 7, UAC remains on even when the value of "Never notify", giving rise to all sorts of problems in Explorer tries to work with file permissions.

  Oh and to answer one other question I saw you ask from the beginning: this folder of the .net Framework was created by .net Framework Installer.  He breaks all the rules and frustrating unpacks his junk everywhere where it feels like.  I got it decompress on a front SD card, making the installation would take forever.  After installing the .net Framework, you probably disconnected the drive before restarting your computer, so these files let me.  Or the installation crashed and started you again.  Meanwhile, installs the failure left its Temp files behind.  It was supposed to remove the folder when the installation is complete.  You can remove safely as the folder manually.

• Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive

  Hello

  I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.

  I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.

  I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.

  I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?

  See you soon

  Usually start up to a blank screen without the Apple Logo, may report one of the following:

  • Hardware failure
  • Boot drive is not recognized as valid and updated updated
  • OS X essential software is missing, hurt moved or renamed or corrupt
  • A firmware update is necessary

  No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.

  Alternatively, you can try holding down the C key to try to boot from the external drive.

  If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.

  Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up.  This can help to identify hardware problems.

• Update hard drive and transfer data from the old disk

  I want to spend my hard drive in a 1 TB and the transfer of the data from my old drive again.

  Thank you teacher sounds like a good plan to me.

  Solutions & KUDO

• If I bought a new internal hard drive, can I transfer windows hard drive fom that came from the computer to the new, or do I have to buy another software package full of windows?

  What should I do to get windows vista on the new hard drive on the old, because I would like to upgrade to windows 7 since vista when I transferred transversely to the new.

  Your license of Vista will be OK to reinstall it on a hard drive replacement on the same computer.

  Hard disk manufacturers provide normally cloning software to do what you want to do.

  Look at your new Hard Drive manufacturer's Web site.

  Or there are 3rd Party software (cost the same money if): http://www.acronis.com.au/homecomputing/products/trueimage/

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  See you soon.

  Mick Murphy - Microsoft partner

• How can we ranked music saved on an external hard drive be re-imported in the windows media player 11? My operating system is Windows XP.

  All the music in question files saved on an external hard drive because I had to reinstall the operating system on my pc.

  All the music in question files saved on an external hard drive because I had to reinstall the operating system on my pc.

  ===========================================
  The following article might be worth a visit:

  Windows Media Player 11 - organize and search your digital media collection
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/library

  Thanks for your help!

  ====================================
  You are welcome and thank you for the comments.

• IMac-formatted external hard drive is not detected in the window computer

  I had formatted my drive external hard seagate new with the imac. now the problem is that it is detected in the iMac and not in my computer window. kindly help me in the detection of seagate in my computer window

  What format do you have selected?

  Ciao.

• My white disc light WD external network is no longer visible in the Finder since the upgrade to El Capitan, drive always is accessible from the Windows PC network.

  Problem is roughly according to the title. I had a white WD external light of diving for quite awhile now and I currently plugged it on the same network switch as my iMac, and the printer. Since the upgrade to the latest version (pretty sure it's) El Capitan I see is no longer the drive in Finder. There is an old Windows PC that is connected to another network down switch and who can access the drive of property. I have reset the drive and the iMac and replaced the local network cable.

  I have some technical knowledge, but I'm not a COMPUTER guru.

  Ch6tty

  Can connect you via CMD-K (to connect to the server) and type the IP address / name of the network-share?

• How can I access the Internet in Windows 2000 server w/AD?

  I installed the unit in the Windows 2000 server as AD and DNS server is the local IP address in the ownership of the network.

  How can I set DNS server to connect to the Internet?

  Thank you

  Under the server name in DNS, you will see the SEARCH BOX towards the FRONT. There will be a POINT "." it. Delete the point, close dns, dns or reopen and forwarders will be available.

• How can I change lightroom 5 previews smart on the book of mac pro (mbp) when lightroom master image files 5 are on my external hard drive is disconnected from the mbp

  How can I change lightroom 5 previews smart on the book of mac pro (mbp) when lightroom master image files 5 are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external hard drive the mbp, I get the pop following window: "external hard drive A" disc could not be ejected because it uses 'Lightroom '. Exit this application and try out this disc again. When I do that and restart Lightroom 5, Adobe Photoshop Lightroom - screen select catalog appears, but does not list my external hard drive A as a choice.

  I've been reviewing Adobe's Lightroom Help | Smart web page Previews Lightroom 5 and still have not been able to understand what I am doing wrong. Any help would be appreciated.

  HI Thomas,

  Thank you very much for your suggestions! They finally gave me the direction I go solve the problems I had. Basically, the Mac Book Pro based Lightroom irdata files still had thumbnails. Once I removed the and redirected Lightroom external hard disk, smart previews of the external drive work when the player is well off the MBP. Much obliged.

  I was wondering if you have any suggestions on how to backup all the files content and related data of Lightroom that exists on the external hard drive to another external hard drive as a backup? Ideally, it would be great if I could be able to launch security HD since the Mac Book Pro and do the work of Lightroom with the backup image files and intelligent previews correctly. Thanks again. Your help has been invaluable.

• How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.         I realize that the reformatting is not always necessary, but I caught a few viruses (despite anti-virus running) and I need to start with a clean hard drive.

  On Friday, January 9, 2015 14:30:32 + 0000, BlueKodak wrote:

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.

  You must go into the BIOS and change the boot on CD order
  first push.

  How to get into your BIOS? It is not dependent on Windows, but on what he
  motherboard/BIOS card that you have. In fact, you need access to the
  BIOS before Windows begins to start. A common method is to press
  the key delete when you turn on first, but this is not necessarily true
  for your computer. Watch the display carefully when you start first;
  There is often a message here to tell you what to do. If this is not the case, check
  your system documentation or check with your provider.

• External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management.

  External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management. But when I checked in system information, it is also displayed device but sectors and the tracs where showing the value 0.

  Hello Sharan,

  These links may help:

  http://TechNet.Microsoft.com/en-us/library/cc750198.aspx

  http://TechNet.Microsoft.com/en-us/library/cc977219.aspx

• How to install Win7 on new hard drive and still access all the files from the hard drives of previous Vista?

  I currently have a Windows Vista PC. It has two SATA drives, one with the operating system, the one I use for storage.

  I want to buy a new SATA hard drive and install a new copy of Windows 7 top.

  I want to know the steps to follow to do this. My plan is this:

  1. turn the pc power off and open the case.

  2. remove the old hard disks

  3. plug the new empty hard drive

  4. turn on the pc and the insertion of the disc to install to Win7 for DVD-ROM drive

  5. enter in the bios and put the DVD-ROM as first boot device

  6. install win 7 on new hard drive.

  Is this correct?

  Because my next question is important:

  7. Turning off the computer.

  8 reconnect the two old hard drives. New total number of SATA drives connected = three.

  Now when I restart the PC and login to Win 7, it lists two other drives as, for example, D:\ and E:\ readers?

  How can I make this work?

  Thank you very much!

  Thanks for your reply, but I don't want to dual boot. I just want to have the hard drive as the master drive Windows7 and the old two drives as slaves, where I can access files as the pictures and letters.

  Any help would be appreciated!

  Well, I would disconnect all drives hard current interns, then connect the new hard drive, reinstall Windows 7, re - attach the old readers as slaves and copy all the data you need to on the disc of Windows 7.

  See:

  How connect a SATA Hard Disk as a slave . eHow.com
  Single, master and slave drives and Jumpering