PXI-8512 1074388957 error invalid interface

I am trying to establish communications of frame based with a PXI-8512 can map that appears in the NOT-MAX as having two ports - CAN1 and CAN2. When I try to run the example VI with CAN1 or 2 I get this message. I'm short NOR-XNET 1.6 and NI-CAN 2.7.4

Advertisement

I think that you need to install a layer of compatibility between NOR-XNET and NI-CAN.  See http://zone.ni.com/devzone/cda/tut/p/id/9717

Tags: NI Hardware

Similar Questions

  • PXI-8512/2 XNET CAN stops when bus errors occur on Spadina

    Hello, I use the PXI-8512/2 in a noisy electrical environment so I often get errors on the CAN bus. I noticed that often 8512 stops communicate. In my dual port 8512/2, 4, # LED that flashes normally will eventually turn off. However, I have other devices listening on the same bus; report errors, they continue to stay alive. Is there anyway that I can get the 8512 continue to work in the presence of errors? I use the custom device XNET for VeriStand 2009 and do not see the error handling options. In fact, I don't get any notification of errors at all. I just noticed that my incoming CAN stop signals and my leavers have no effect. Thank you.

    Hello

    You shouldn't have to remove from your devices.  Just update the configuration and engine llbs and restart the Explorer system, save your configuration and redeployment.  Let me know if you see problems.

    (There are new files also copied into the directory of device custom if you want to use the bus monitor function... so you can replace the entire record of the NOR-XNET if it's easier).

  • The PXI-8512 does support the series 2 filter or a similar mechanism to filter the messages?

    Hello

    I need to buy a couple of cards CAN interfaces for my test application and I wonder what you choose

    I already used a PXI-8461 to obtain data of the customer model under test, and due to the fact that sometimes the client bus can be very busy, but most of the messages is not interesting for my system that I use currently series 2 comparator/mask/filter to filter only the interesting messages.

    Without this filter, the PXI-8461 often returns an error due to overloading of the bus. With the filter, everything works perfectly

    Now I need to implement several testbeds with this same feature, and I plan to move to the new PXI-8512 for new.

    My question is: is the most recent PXI-8512 a device series 2 institutions? Support the filter 2 series or any other mechanism to avoid problems on the busy bus?

    Thank you for your support.

    Kind regards

    Davide

    Hi Davide.

    the PXI-8512 isn't a series 2 device. The PXI-8512 is a device of the X-NET family. X-NET is the technology whose use OR in support of CAN, LIN and FlexRay with a driver API. Series 2 devices use the former NI-CAN driver that only supports the CAN. All of the new devices are devices X-NET.

    Take a look to the following document:

    NI-CAN for NOR-XNET application migration
    http://www.NI.com/white-paper/9717/en

    On this page you will find the following statement for the function that you are already using:

    Transceiver filters were traditionally indicated for applications where only a few CAN IDs have been considered on a bus high load. In some cases, material NI-CAN support the bandwidth of the full bus, which leads to a buffer overflow. The hardware architecture OR XNET uses the engine NOR-XNET DMA-driven to eliminate the occurrence of buffer overflows. CAN of NOR-XNET interfaces are able to handle high load bus and transmitting at the maximum rate without coupling to buffer overrun. If your applications use the hardware filters extensively, NOR recommend setting up CAN opposes, or by reading the bus while using Network Interface objects. The best option for these applications is to modify your code to use the API OR-XNET native.

    Best regards, Stephan

  • Error invalid number

    Dear Experts

    In fact, we have two packages one is master and another package which is subpart of the master package...

    Now the question is when I run only subpart, it works well. If run master and then to Subpart package and then the package is a failure...

    When I checked the error code is not a valid number. When I checked the code the error occurs during insertion...

    in my sql developer, I tried this insertion and I don't have any error invalid number.

    When I run simply Subpart together then I don't have this error number it runs successfully...

    When I run the master package calling this subpart, then I get an error invalid number.

    can you please how to debug or explore the problem...

    Best regards

    ASP.

    If you need a solution to get out variables for 11.1.1.5 to take a look at the procedure, generic, as demonstrated at the following link

    Variables to run wrong for older versions of the ODI | EMP DEV

    put this procedure in a package and run just before that your interface is running but after all variables have been defined and it will list the values of the variables in the operator and if all goes well to highlight the rogue variable

  • ERROR: Invalid input. home page loading IE load properly?

    Try to load the homepage of our local Government to the:
    http://www.addisontx.gov
    results in a blank screen otherwise with the following message is displayed at the top left:

    ERROR: Invalid input. Use the back button on the browser to go to the previous page.

    This page will load free error in Internet Explorer. The problem existed before my update of Firefox in version 9.0.1

    Hello

    Please try after deleting cookies and if it persists, try a Ctrl + F5 refresh: (Alt + T) Tools > clear recent history... (or Ctrl + Shift + Del), next to range of time:, select all, click Details , and check the Cookies. CTRL + F5 Refresh allows bypasses cache and brings in the new page.

    Clear recent history

    ...............................................................................................................................

    Useful links:

    Everything on tools > Options

    Beyond the tools > Options - about: config

    Subject: config entries

    Information page (Alt + T) tools > Page Info, right-click > view Page information

    Keyboard shortcuts

    View without Plugins

    Files & Firefox profile folder

    Firefox commands

    Basic troubleshooting

    After the upgrade

    Safe mode

    Extensions of the issues

    Troubleshooting Extensions and themes

    Troubleshooting Plugins

    Test Plugins

  • Synchronize PXI-8512/2 and DAQ, PXI-6220 CAN

    Hello

    I read some examples and other posts on the topic "sync", but I need more information.

    I'm using a PXI-8512/2 with an older application, based on the API of frame. Several frames are transmitted and received periodically, and I need to enter a unique ID of arbitration which has a cycle of ~ 5 ms.

    At the same time, I need a task of data acquisition (analog input) with a sampling frequency of 1000 Hz.

    The challenge is, I need to have the same time base for the analog input and CAN.

    As far as I understand, the timestamps CAN are created in the PXI-8512. The timestamp of the start of the DAQ tasks is based on the time of OS (Windows).

    Transmission/reception CAN must be running still (to perpetuate the ECU), and the data acquisition task will be triggered manually.

    I found the example '\nican\Frame - base with NI - DAQmx.llb\CAN Frame entry API DAQmx Input.vi'. It fits my needs? There is a comment saying: "the departure of AI uses the same sampling as CAN. What it means? The sampling frequency of my CAN is fundamentally different from DAQ. But I have to be able to associate each sample DAQ for a CAN of armature (same time base).

    Thank you for any information helping to clarify.

    Concerning

    Hello

    Sorry, I don't know why I thought you had an X-Series. There is also an example for the other series with the XNET driver:

    Synchronize PXI - CAN with analog DAQmx of entry (using the PXI-Clk10) .vi

    Kind regards

    Heinz

  • Version with ControlLogix - link cRIO (implicit messaging), "(Code 16 #0315) problem" connection request error: invalid segment type ""

    I have developed and delivered a system in Germany several years ago.  He worked then.  But the cRIO was damaged and replaced by a newer model, and does not now.  I suspect (and Support technical OR agree) it's a problem of software version, which could be solved with the NOT-MAX Software Installer.  But I do not have access to the system myself, and correspondence is slow and tedious.

    The original system was a cRIO-9073, developed with LabView 2009.  He used the implicit Messaging.  The ID of Instance, sizes, IP addresses, etc everything has worked very well.

    The current system is a cRIO-9074, with LabView DURATION 14.0 (I guess that LV 2014), Scan Engine 4.3, NI - Industrial Communications for Ethernet/IP 14.0.0, etc.  Programs FPGA and processor are responsible and seem to work in the cRIO.  The "EthernetIP Set Assembly Instance Data.vi' will return no error.  But the PLC just pointing out "(Code 16 #0315)" connection request error: invalid segment type "."  We looked at intellectual property (the mistake was different), sizes and body #s.

    The PLC doesn't have to all be modified.

    Anyone know if there is no problem of compatibility with LV-2014 and Ethernet/IP 14.0.0?  Or if there are all the other required packages?

    I am including the NOT-Max reports.

    Hi ZX81

    To help you 2009 application to work with the new cRIO, you must deploy it to the device. You must in order to deploy the cRIO, make sure it has the same versions of software that you used with the old cRIO.

    You can format the cRIO NI MAX and deploy the application of LV, 2009. However, if you do not have access to the cRIO or your client does not have the necessary software, you can deploy the application in another cRIO with software (cRIO same model and same modules as your client) and create a picture of it and send it to your customer so that it can deploy the cRIO even without the software on his computer. The following document explains how to do this.

    Utility of RAD

    WenR

  • No identifier CAN correct with the NI PXI-8512

    Hello

    This morning, I had a good Communication running with my device via the PXI-8512 OR XNET.

    I worked with the XNET Read(Frame_CAN).vi

    My computer crashed, and after that, nothing works anymore. I'm afraid I've changed something in VI and registered, but I don't know what.

    Y at - it the posibiltity perhaps reinstall the XNET library or something like that?

    Thanks for your help!

    Found the solution,

    I changed the xnet.llb

    Uninstall the driver X-NET and then reinstall it. Everything works fine again.

  • PXI-8512 software compatibility issues

    I have a PXI-8512 CAN module high speed in my system. My PXI controller a real-time OS. I'm having some problems and tried to identify the problem.

    My question:

    Are there known problems with the PXI-8512 compaitbility using the NI-CAN 2.7.4 software installed on a system in real-time?

    It was a problem with my code. I announced my CAN messages to a queue and it sometimes took a long time for the message BOX to be actually defined. Never understood why the 2012 of LAbWindows/CVI has worked better than the 2013 but found a work around so my problem is solved.

  • Windows 2003 server the trial verson activation error: "invalid product key. Pls Help.

    I am trying to activate my trial 360days WIn 2003 version but the error: "INVALID PRODUCT KEY".

    Please any help?

    It seems that the trial was for the RC2 release of the server - not the release.

    It is time-bommbed and it has expired yonks.

  • ERROR: Invalid Allocation, 1610612738 bytes in Links 2003 running Windows 7 ultimate 32-bit edition

    Hello

    To solve the problem that I have, program uninstalled, rebooted machine. Has conducted an audit of the registry and remove the entries from 7 registry errors in Links 2003. Rebooted the machine. Installed Links 2003, installed patch 1.05, 1.07, and Links2k3-nvidia_win7_FINAL. I also tried to launch, links 2003 Safe Mode and still, I get this error message: ERROR: Invalid allocation, 1610612738 bytes. Any help would be greatly appreciated.

    ERROR: Invalid allocation, 1610612738 bytes

    Processor registers EAX = 0 x 00000000 EBX = 0 x 00000000 ECX = 00000000 EDX = 00000000 Flags x 0 x 0 = 0 x 00000000
    = ESI = 0X00000000 EDI 0X00000000 EBP = 0X0012F4A8 ESP = 0X0012F348 EIP = = 0X00000000
    EIP (0X00000000)? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ??
    ESP (0X0012F348) 0012F35C 0012F634 0012F62C 01DC3DC0 60000002 00010000 000001A 9 03C20DE0
    00000100 0000002D 01DC4258 00000200 0000003D 01FDFDB0 76F5491C 00000014
    75206AC4 84027F1C 00000674 75206E93 75206E9E 0031007E 75206E9E 004C002E

    Details of the machine
    ===============
    Name of executable: C:\Links 2003\LINKSMMIII. EXE
    Executable hour, date: 19:49:12 Tuesday 3/30/2010
    Command line:
    Current directory: C:\Links 2003
    Currently, date: 19:05:49 Tuesday 6/22/2010
    GameOS build version: Version 1.1 02/11/2000
    Software rasterizer: c:\links 2003\assets\binaries\blade.dll (size 282 693 bytes)
    Username: Mike Harrison
    Computer name: HICHAMCHGORA
    Processor: 2812 MHz AMD 3DNow unknown MMX! Model SSE = 10, Type = 15, Stepping 0 = (6 processors)
    Cache information: unknown
    L2 w/r/rw speed: 4 cycles 22496 Mbps, 4 cycles 22496 Mbps, 4 cycles 22496 Mbps
    Main memory r/w/rw speed: 14 cycles 6427 MB/s, 13 cycles 6921 Mbps, 10 Mbps 8998 cycles
    W/r/rw video memory speed: 204 cycles 441 MB/s, 38 cycles 2368 Mbps, 289 cycles 311 Mbps
    W/r/rw memory AGP speed: 204 cycles 441 MB/s, 37 2432 Mbps, 288 cycles cycles 312 MB/s
    Operating system: Windows (6.1.7600)
    DirectX version: 9.04.00.0904
    Since booted time: 2 h 45 m 25 s
    In the logic of the game time: 0 h 0 m s 0.62 (on frame 3)
    App running time: 0 h 0 m s 0.62
    Physical memory: 2 147 483 647 bytes (2048 Meg)
    Physical memory available: 2 147 483 647 bytes (2048 Meg)
    The swap file size: 4294967295 bytes (0 Meg)
    Available page file: 4294967295 bytes (0 Meg)
    Virtual memory: 2,147,352,576 bytes (2048 Meg)
    Virtual memory available: 1,937,620,992 bytes (1848 Meg)
    Amount of the used battery: 3172 bytes
    Memory load: 31%
    Desktop video mode: 32bpp 1920,1080
    Mode when the accident occurred: full screen 1920 x 1080 x 32 (NVIDIA GeForce GT 220)
    Networked Machine: No.
    Executable version: 01.08.06.2200
    PCI Chipset: unknown

    Path of Threads process Pri
    ==========================================
    TaskHost.exe: 8: 8: C:\Windows\system32\taskhost.exe
    DWM.exe: 13:5: C:\Windows\system32\Dwm.exe
    BCU.exe: 8:6: C:\Program Files\DeviceVM\Browser Configuration Utility\BCU.exe
    RoxioBurnLauncher.exe: 8:8: C:\Program SharedCOM 2010\Roxio Burn\RoxioBurnLauncher.exe
    VxBlockServer.exe: 8:5: C:\Program Files\Common PX storage Engine\VxBlockServer.exe
    SetPoint.exe: 8:5: C:\Program Files\Logitech\SetPoint\SetPoint.exe
    KHALMNPR. EXE:-08:27: C:\Program Files\Fichiers Files\Logishrd\KHAL2\KHALMNPR. EXE
    RtHDVCpl.EXE: 8, 9: C:\Program Files\Realtek\Audio\HDA\RtHDVCpl.EXE
    Skype.exe: 08:20: C:\Program Files\Skype\Phone\Skype.exe
    LinksLauncher.exe: 8:1: C:\Links 2003\LinksLauncher.exe
    LINKSMMIII. EXE: 08:16: C:\Links 2003\LINKSMMIII. EXE

    Version numbers of DLLS
    ===================
    Msvcrt.DLL - Version 7.0.7600.16385 - found in C:\Windows\system32
    'Msvcrtd.dll' is not found
    Msvcirt.DLL - Version 6.1.7600.16385 - found in C:\Windows\system32
    'Msvcirtd.dll' is not found
    amstream.DLL - Version 6.6.7600.16385
    Quartz.DLL - Version 6.6.7600.16385
    Ir50_32.DLL - Version R.5.10.15.2.55
    Dsound.DLL - Version 6.1.7600.16385
    Dinput.DLL - Version 6.1.7600.16385
    D3dim.DLL - Version 6.1.7600.16385
    Ddraw.DLL - Version 6.1.7600.16385
    dplayx.DLL - Version 6.1.7600.16385

    Audio device 0 (current) - (HW disabled mix)
    ==============
    Description: Realtek Digital Output (Optical) (Realtek High Definition Audio)
    Driver file: {0.0.0.00000000}. {cdc8ecc5-7109-4d8d-9ac9-dacfb4f56528}
    Data of the driver file: can not find the driver file
    CERTIFIED: No.
    EMULDRIVER: No.
    CONTINUOUSRATE: Yes
    PRIMARYMONO: Yes
    PRIMARYSTEREO: Yes
    PRIMARY8BIT: Yes
    PRIMARY16BIT: Yes
    SECONDARYMONO: Yes
    SECONDARYSTEREO: Yes
    SECONDARY8BIT: Yes
    SECONDARY16BIT: Yes
    MinSecondarySampleRate: 100
    MaxSecondarySampleRate: 200000
    PrimaryBuffers: 1
    MaxHwMixingAllBuffers: 1
    MaxHwMixingStaticBuffers: 1
    MaxHwMixingStreamingBuffers: 1
    FreeHwMixingAllBuffers: 0
    FreeHwMixingStaticBuffers: 0
    FreeHwMixingStreamingBuffers: 0
    MaxHw3DAllBuffers: 0
    MaxHw3DStaticBuffers: 0
    MaxHw3DStreamingBuffers: 0
    FreeHw3DAllBuffers: 0
    FreeHw3DStaticBuffers: 0
    FreeHw3DStreamingBuffers: 0
    TotalHwMemBytes: 0
    FreeHwMemBytes: 0
    MaxContigFreeHwMemBytes: 0
    UnlockTransferRateHwBuffers: 0
    PlayCpuOverheadSwBuffers: 0

    Video device 0
    ==============
    Description: NVIDIA GeForce GT 220
    Company / Chipset: nVidia.
    Driver file: nvd3dum.dll
    Driver size: 9 386 600 bytes
    Driver date: 22:55:32 Saturday 4/3/2010
    Attributes: Final Version, Private Build
    Driver version: 8.17.11.9745
    Version: 8.17.11.9745
    Hardware ID: 10DE.0A20 (Rev 162, Subsys 0 x 12253842)
    Video memory: 2,375,872,512 bytes (2266 Meg)
    Mem texture map: 1,034,485,760 bytes (987 Meg)
    AGP texture memory: 1,341,386,752 bytes (1279 Meg)
    Modes of FourCC: NV12 NV24 YV12, UYVY, YUY2 AI44 AI88 AYUV AIP8 AV12 PLFF NVMD NVDP NVDB SSAA ATOC
    Texture formats: 555 1555 4444 565 0888 8888 bump N→∞ (8,8) bump map N→∞ (8,8) FourCC (1TXD) FourCC (2TXD) (3TXD) FourCC FourCC (4TXD) FourCC (5TXD) FourCC (SCVN) FourCC (UHVN) FourCC (SHVN)
    Z buffer formats: 16 bit Z 32 bit Z (Z = 32 (0xffffff00) template = 8 (0xff)) (Z = 32 (0xffffff) template = 8 (0xff000000)) 32 bit Z 24 bit Z
    modes 16 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
    mode 32 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
    CERTIFIED: No.
    DRAWPRIMITIVES2: Yes
    DRAWPRIMITIVES2EX: Yes
    DRAWPRIMTLVERTEX: Yes
    FLIPINTERVAL: Yes
    FLIPNOVSYNC: Yes
    NO2DDURING3DSCENE: No.
    NONLOCALVIDMEM: Yes
    NOPAGELOCKREQUIRED: No.
    CALIBRATE the GAMMA: No.
    PRIMARYGAMMA: Yes
    ZBuffer: 16 24
    Rendering depth: 16 32
    Texture size: 1 x 1 to 8192 x 8192
    Maximum U, v coords: 8192.0
    Cutting guard :-100000000,-100000000 to 100000000,100000000
    AlphaTest NotEqual: Yes
    Lack of mixture of the CBC:
    Lack of mixture Dest:
    Texture AGP: Yes
    Texture coords: 8
    Mix the steps: 8
    The Textures of max: 8
    Hardware T & L: Yes
    Vertex Blending: 4
    Maximum lights: 8
    Clip planes: 8
    Mix Lightmap: Ok
    Mix Specularmap: Ok
    Mixture of detail: Ok
    Vid linear memory: Yes
    SELECTARG1: Yes
    SELECTARG2: Yes
    ADD: Yes
    ADDSIGNED: Yes
    SUBTRACT: Yes
    MODULATE: Yes
    MODULATE2X: Yes
    MODULATE4X: Yes
    BLENDCURRENTALPHA: Yes
    BLENDDIFFUSEALPHA: Yes
    BLENDTEXTUREALPHA: Yes
    BUMPENVMAP: Yes
    BUMPENVMAPLUMINANCE: Yes
    DOTPRODUCT3: Yes
    ANISOTROPY: Yes
    ANTIALIASSORTINDEP: Yes
    FOGTABLE: Yes
    FOGVERTEX: Yes
    FOGRANGE: Yes
    WFOG: Yes
    WBUFFER: No.
    MIPMAPLODBIAS: Yes
    WBUFFER: No.
    ZBUFFERLESSHSR: No.
    MIPNEAREST: Yes
    LINEARMIPLINEAR: Yes
    DONOTSTRIPELEMENTS: Yes
    TEXTURE CLAMP: Yes
    BORDER TEXTURE: Yes
    MIRROR of TEXTURE: Yes
    ALPHAGOURAUDBLEND: Yes
    SQUAREONLY: No.
    COLORFLATMONO: Yes
    COLORGOURAUDMONO: Yes
    COLORFLATRGB: Yes
    COLORGOURAUDRGB: Yes
    SPECULARFLATRGB: Yes
    SPECULARGOURAUDRGB: No.

    Video device 1
    ==============
    Description: NVIDIA GeForce GT 220
    Company / Chipset: nVidia.
    Driver file: nvd3dum.dll
    Driver size: 9 386 600 bytes
    Driver date: 22:55:32 Saturday 4/3/2010
    Attributes: Final Version, Private Build
    Driver version: 8.17.11.9745
    Version: 8.17.11.9745
    Hardware ID: 10DE.0A20 (Rev 162, Subsys 0 x 12253842)
    Video memory: 2,375,872,512 bytes (2266 Meg)
    Mem texture map: 1,034,485,760 bytes (987 Meg)
    AGP texture memory: 1,341,386,752 bytes (1279 Meg)
    Modes of FourCC: NV12 NV24 YV12, UYVY, YUY2 AI44 AI88 AYUV AIP8 AV12 PLFF NVMD NVDP NVDB SSAA ATOC
    Texture formats: 555 1555 4444 565 0888 8888 bump N→∞ (8,8) bump map N→∞ (8,8) FourCC (1TXD) FourCC (2TXD) (3TXD) FourCC FourCC (4TXD) FourCC (5TXD) FourCC (SCVN) FourCC (UHVN) FourCC (SHVN)
    Z buffer formats: 16 bit Z 32 bit Z (Z = 32 (0xffffff00) template = 8 (0xff)) (Z = 32 (0xffffff) template = 8 (0xff000000)) 32 bit Z 24 bit Z
    modes 16 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
    mode 32 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
    CERTIFIED: No.
    DRAWPRIMITIVES2: Yes
    DRAWPRIMITIVES2EX: Yes
    DRAWPRIMTLVERTEX: Yes
    FLIPINTERVAL: Yes
    FLIPNOVSYNC: Yes
    NO2DDURING3DSCENE: No.
    NONLOCALVIDMEM: Yes
    NOPAGELOCKREQUIRED: No.
    CALIBRATE the GAMMA: No.
    PRIMARYGAMMA: Yes
    ZBuffer: 16 24
    Rendering depth: 16 32
    Texture size: 1 x 1 to 8192 x 8192
    Maximum U, v coords: 8192.0
    Cutting guard :-100000000,-100000000 to 100000000,100000000
    AlphaTest NotEqual: Yes
    Lack of mixture of the CBC:
    Lack of mixture Dest:
    Texture AGP: Yes
    Texture coords: 8
    Mix the steps: 8
    The Textures of max: 8
    Hardware T & L: Yes
    Vertex Blending: 4
    Maximum lights: 8
    Clip planes: 8
    Mix Lightmap: Ok
    Mix Specularmap: Ok
    Mixture of detail: Ok
    Vid linear memory: Yes
    SELECTARG1: Yes
    SELECTARG2: Yes
    ADD: Yes
    ADDSIGNED: Yes
    SUBTRACT: Yes
    MODULATE: Yes
    MODULATE2X: Yes
    MODULATE4X: Yes
    BLENDCURRENTALPHA: Yes
    BLENDDIFFUSEALPHA: Yes
    BLENDTEXTUREALPHA: Yes
    BUMPENVMAP: Yes
    BUMPENVMAPLUMINANCE: Yes
    DOTPRODUCT3: Yes
    ANISOTROPY: Yes
    ANTIALIASSORTINDEP: Yes
    FOGTABLE: Yes
    FOGVERTEX: Yes
    FOGRANGE: Yes
    WFOG: Yes
    WBUFFER: No.
    MIPMAPLODBIAS: Yes
    WBUFFER: No.
    ZBUFFERLESSHSR: No.
    MIPNEAREST: Yes
    LINEARMIPLINEAR: Yes
    DONOTSTRIPELEMENTS: Yes
    TEXTURE CLAMP: Yes
    BORDER TEXTURE: Yes
    MIRROR of TEXTURE: Yes
    ALPHAGOURAUDBLEND: Yes
    SQUAREONLY: No.
    COLORFLATMONO: Yes
    COLORGOURAUDMONO: Yes
    COLORFLATRGB: Yes
    COLORGOURAUDRGB: Yes
    SPECULARFLATRGB: Yes
    SPECULARGOURAUDRGB: No.

    Hello again,

    I want to thank each and everyone of you for your input to try to help solve the problems I've had with links.

    I am happy to report that I played my first round in nearly two weeks in this... Morning. The problem is a corrupted file, .l3. I have a little more 1 100 PoliAnis' and am not sure which one is, but I can play. I tried whenever I took one of the following folders on until I finally took the PolyAni folder:

    WAVs, mops, Custom photos of players, sky, Clubs, PIN code files and finally, all but one of PolyAni files. That after taking all but one of the frequented out of the folder PolyAni links has started without giving me the error of attribution not valid.

    Thanks again to you all for your help.

    Sincerely,

    Mike

    Really_Rotten

  • GGetting advapi32.dll error invalid function on bootcamp

    Original title: at the start, I am reciving an error "invalid function advapi32.dll" almost all start-ups. How can I troubleshoot this to clear the error?

    Do not know what is the origin, online searches, just trying to sell me programs to erase it. some answers say hardware problems, software. all my gear works as far as I can see, no errors in the hardware Manager.

    Win xp SP3.

    Thanks in advance for any help!

    You are welcome. Marking of one (or several) of our responses as RESPONSE will officially close your thread. (No, you can't score a the answers as RESPONSE.)

  • How can I fix the 800cccdd or the fatal error: invalid argument errors?

    I installed Windows Live Mail on the client with Windows XP Pro SP3 machine after having problems with Outlook Express.

    I migrated their accounts more and they have the same problems in two e-mail clients.
    "Your IMAP server closed the connection. This can happen if you have left the connection idle too long. »
    IDLE completed

    Configuration:
    Account: * e-mail address is removed from the privacy *.
    Server: mail.example.co.uk
    Username: info + example.co.uk
    Protocol: IMAP
    Port: 143
    Secure (SSL): 0
    Code: 800cccdd
    Other times I may receive this error message:
    We received a notification on your ' * address email is removed from the privacy *' account: Fatal error: Invalid argument
    I tried this on other computers that are running Microsoft Outlook and Mozilla Thunderbird, without errors or problems.
    He was works well, only recently, we started to see this question, no changes on the server or the client have been changed (to the best of my knowledge).
    Can anyone say more?
    Thank you.

    I deleted a double "Junk E-mail" folder by using the mapi connection (could use OWA) and then was able to use the Imap Protocol.  I hope this helps.

  • Error message: Error Invalid backweb version 1.1.50 Runner - 887648OSL

    Original title: error message

    What does this message mean? "Error Invalid backweb version 1.1.50 Runner - 887648OSL.

    Hello

    1. Once you get this error message?
    2. have you done any change in software on the computer lately?

    Method 1.
    First of all I ask you to run a virus scan and online check. Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
     
    a. follow the link below to start the free online scan:
    http://OneCare.live.com/site/en-us/default.htm
    b. run the malware removal tool from Microsoft.
    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
    c. I recommend you to install the free security software from Microsoft, which is easy to install and updates automatically
    Here is the link to download.
    http://www.Microsoft.com/securepc

    Method 2.
    After removing a spyware or a virus that the program would require the spy software must be installed in order to run, without it you will get the Run Time error again. This program runs on startup, so you will need to uninstall the program that had the spyware that are associated with. We can use the boot minimum troubleshooting to find this program.
    You need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • IE Script error: invalid argument

    Try to download the Vista CD. I get the message:
    IE Script error
    Line38
    2 tank
    Error: Invalid Argument
    Code 0
    URL file:///E:webfiles/template.js

    Hi al184doll,

    Thank you for using answers Forum.

    The script makes error refers to an error in the code that was written for the Web site.

    "Line38, Char 2" is the line of code and the character which is the origin of the problem on the Web site.

    You can contact the webmaster for the website to see if a resolution is available.

    I hope this helps.
    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • In Contacts, how to print a mailing list?

    Hello I need to print a list of all the names in a specific mailing list. The instructions in the help of Contacts do not work. They say "to highlight the individual or in a group, go to file > print.»  All that happens when I do it is that it offers

  • cRIO-9024 - supports SSH (Secure Shell) network?

    The Shell Server enable secure (sshd) in the measurement software & automation for the cRIO-9024 OR is not available. Usually, this would be an option as shown here: http://www.NI.com/white-paper/14626/en/ The cRIO-9024 OR does support SSH? Do I need

  • Activation of the module

    I had to install LabVIEW on another computer, but when I tried to run my screws saved, IMAQ vision screws were not all installed.  I couldn't, so I transferred the vision above an old computer as suggested here http://digital.ni.com/public.nsf/allkb/

  • 9211 module and IR thermocouple

    Hello world Once more I need a little guidance from the community.  I work on a new device and uses a cRIO-9074 chassis with a TC 9211 module. I'm trying to connect a mini IR thermocouple (link below, OS36SM-K-140F part number) for one of my measurem

  • How prevents from automatically duplicate e-mail messages?

    All my emails received on my cogeco via Outlook Express email address are duplicated.