Q in the use of the Q Protocol

Similar Questions

• How to prevent the FF loading all Web sites using the HTTPS protocol

  FF is trying to load initially all Web sites using the HTTPS protocol, including of mozilla.org. Then I get the error of no reliable connection of course. Mozilla .org is the "invalid security certificate" and "the issuer of the certificate is unknown." I tried to delete the file cert8.db as suggested elsewhere but that did not help. If there is an option for this somewhere, I can't find it. I have the latest version of FF and Win7 running. Thanks for the help.

  There must be some sites that are still using a secure connection, as http://www.amazon.com/. If even a link to Amazon is redirected, you can check if you have an extension like HTTPS Everywhere.

  For Mozilla sites, Yes, you establish a secure connection.

  But you shouldn't get certificate errors! When you get this for virtually all secure sites, the problem is usually as follows:

  (1) error of date, time, or time zone who throw checks validity of the certificates of your system. Sometimes allowing to use a timesource on the internet, the computers can introduce this problem.

  (2) not be set up to work with your security software that intercepts and filter secure connections from Firefox. Products with this feature include Avast, BitDefender, ESET, Kaspersky; AVG has a shield search function which can cause this error on search sites.

  (3) malicious software on your system for the interception of secure connections.

  So... who is?

  If you have any of these specific security products, which would be the first thing to check. We might be able to help with specific next steps based on what you have if you tell us.

  Alternatively, you can examine the certificate to which Firefox is opposed to see if the issuer information pointing to the culprit. Take for example my test page:

  https://jeffersonscher.com/RES/jstest.php

  You should see a section "I understand the risks" in the page. If you expand this section, you will find a button Add Exception. You don't need to complete the process of adding an exception (I suggest not adding one until we know that it is not a problem of malware), but you can use the dialog box to display the information that makes Firefox suspicious.

  Click Add an Exception, and then view. If the view is not enabled, try first the button get certificate. Then in the certificate Viewer, refer to the section "issued by". What do you find here, or under the hierarchy of certificates? I have attached a screenshot for comparison of screen.

• How to find the security protocol used by a site in firefox to version 24.6.0

  I'm unable to find the security protocol used by the site, either SSL or TLS 1.0 or 1.2.

  I see my answer above is marked as useless, so I guess it doesn't help for Firefox 24.

  You should be able to see which version of the TLS Protocol and encryption to agree to the current use of press.
  You can use the above posted extension or check in the Security tab of the Web Console (Firefox/tools > Web Developer).
  24 Firefox supports only TLS 1.0 (security.tls.version.max = 1), so that only leaves you with Protocol to guess.

  • http://KB.mozillazine.org/security.TLS.version. *
  • 0 means SSL 3.0, TLS 1.0 means 1, 2 means TLS 1.1, 3 means TLS 1.2 etc..

  In Firefox 24 you have the Security tab in "tools > Page Info > Security" to see what level of encryption is used, and you do not see what costume of encryption is used.
  To find you would have to disable any combination of encryption algorithm by setting the Pref security.ssls false and allow both until you get a secure connection.

• Is the server protocol multimedia Microsoft supports IPv6 traffic? Can if so someone tell me how to use any application that supports Microsoft media server protocol?

  Is the server protocol multimedia Microsoft supports IPv6 traffic? Can if so someone tell me how to use any application that supports Microsoft media server protocol?

  There is some information about technet, for example:
   
  http://TechNet.Microsoft.com/en-us/library/ee126148
   
  Depending on where you're going with this, you will find probably more people
  able to discuss in the technet promedia and networking forums.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

  Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

  Hello X-x_MaGiC_x-X,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Try to download the correct and up-to-date drivers.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• an address incompatible with the requested protocol was used

  After I have upgrade of windows 7 starter edition to windows 7 Home Edition premium, I can't do a bluetooth file transfer and the following message appears: an address incompatible with the requested protocol was used.

  Hello
  How do you transfer the file?

  Method 1:
  Try to perform the audit and the clean boot if this can help,
  Here is the link: http://support.microsoft.com/kb/929135
  Note: When you're done to diagnose, follow step 7 in the article to start the normal start

  Method 2:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
   
  You can try the steps and check.
  (a) click Start and then click Run.
  (b) type regedit and then click OK.
  (c) locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {e0cbf06c-cd8b-4647-bb8a-263b43f0f974}
  (d) right click on the folder, click on delete.
  (e) exit and restart
   
  Method 3:
  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

• Windows could not transfer files. An address incompatible with the requested protocol was used.

  Microsoft. It's so hard to get where you want to go on the site.

  I wish they still had the cat where you enter just a few things, and for free, it instantly opens a window of instant messaging to chat with microsoft.

  Well, I have a dongle bt USB and when I right click and click send a file, it gives an error

  Windows could not transfer files. An address incompatible with the requested protocol was used.

  With windows xp, I plug it and he can move 2 drivers, "microsoft bluetooth enumerator" and "generic bluetooth radio".

  in windows 7, it installs the same 2 drivers

  I pair the device from the phone and it didn't work. while I was looking for the computer and it does not even, but file transfer

  It works totally fine XP and with the same drivers! just different os versions.

  I went to Device Manager, click on set to update driver and he know that later is installed

  BTW, it's a generic radio bt, and it was $10 do9ller micro dongle.

  However, there is no brand name.

  but it works under windows xp? but not 7?

  Windows xp and windows 7 are duel boot, so it's the same material, b/c windows xp and windows 7 is on the same hardware

  If I use the VM vmware, I can transfer files

  Microsoft sucks... I mean except xp. He is old, but it's the best version of windows there, Runnin' on minimum 16 MB of ram and 400 mhz cpu... I luv xp, no more errors

  Hello

  Check if the same device works fine on another computer with Windows 7 installed. Also, try to send files from the phone to the PC and check what is happening.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  You can try the steps below and check if that helps get the Bluetooth dongle to work.

  (a) click Start and then click Run.

  (b) type regedit and then click OK.

  (c) locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {e0cbf06c-cd8b-4647-bb8a-263b43f0f974}

  (d) right click on the folder, click on delete.

  (e) exit and restart

  Now, try to find your device and send the file. It should work.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• QuickSet C20 (software: TC5.0.0.273156) in 8.6.2.20000 - 2 Communications Manager using the SIP protocol.

  All,

  I am trying to record a QuickSet C20 with the following scenario:

  Endpoint registration C20 (software: TC5.0.0.273156) in 8.6.2.20000 - 2 Communications Manager using the SIP protocol.

  My URI format is: [email protected] / * / (the IP address of the CUCM)

  I tried different settings in CUCM and QuickSet C20, but without success.

  Status in CUCM:

  Inscription: unknown
  IP address: unknown

  Status in C20 QuickSet:

  Failure / failed to save. Unprotected. Unverified.

  Note: The C20 QuickSet Gets the correct IP address.

  Can someone help me?

  Waiting,.

  Lucian Medeiros

  I would try to use the version of the following software:

  cmterm - s52000tc5_1_0_280662.cop.sgn

  Downloadable at:

  http://www.Cisco.com/Cisco/software/release.html?&mdfid=283613658&CATID=280789323&softwareid=280886992&release=TC5.1.0-CUCM&rellifecycle=&relind=available&RelType=all

  Not to mention that I would look at:

  http://www.Cisco.com/en/us/products/ps11424/prod_maintenance_guides_list.html

  In particular:

     http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/TC5/administration_guide/cts_endpoint_administration_ucm86_quick_start_guide_tc51.PDF

• Multimedia file sharing only works if the two devices are connected using the same protocol

  So I'm frustrated!

  I spent an hour trying to get my Windows 7 computer to share my music with my XBox 360. I have two machines on my network, one connected by Ethernet to the router and the other connected by WiFi. I tried everything I could find online to get the WiFi connected machine appears in the "Music Player" on my XBox system - follow all sharing, make sure that my router has UPnP, restarted a bouquet of services, etc..
  Nothing! During this time, my machine connected to Ethernet was watching me in the face. He has appeared on the XBox without problem. I started to compare the settings on both machines and found no difference.
  Then I remembered, boredom, I had setting up WiFi sync for Windows Phone my wife. In fact, it was this session of troubleshooting that lead me to put this machine on the WiFi in the first place! Seems to set up WiFi sync, Windows Phone and the target of the machine must be, not only connected to the same network (obviously), but for some reason any the $ @$ crazy, both connected by WiFi. I just connected this computer by WiFi - not happy, a faster speed with my wired connection - and immediately fixed the problem itself.
  Then, remembering that, I moved my XBox WiFi network and - presto - my second machine appears without a problem.
  My question is... WTF! ???
  This is ridiculous - this is the same network! Why things must be connected using the same protocol?

  Hi, Edward Petersen,.

  Please contact the Microsoft community. I'll help you solve the problem with sharing music using media sharing.

  Some routers isolate the cable connections and wireless, you can check if you have the option in the configuration of the router to share media

  If the problem occurs, you can contact the router manufacturer for assistance.

  Hope this information helps. If you need help with Windows, simply reply that we will be happy

  to help you.

• How to change or add to the e-mail program uses the mailto protocol in Windows 8.

  How can I change the path of a program that is used as the default e-mail program in Protocol preferences? When I click on the line for the messaging protocols, I get the following box:

  

  I want to continue to use Foxmail, but after a relocation, it is on my C: drive. (Don't ask why is once stood on my G: drive.) The explanation is too boring). How can I change the current Protocol to change the G and C, or how can I simply add the version of the C: drive as a new Protocol?

  The question is not essential, but I'm curious why Microsoft has replaced the much simpler method under Windows 7 with her bugaboo limited-option.

  Thank you

  Ron

  Thanks, Zig - Zag...

  Minutes after posting my question, it occurred to me that I could make changes to the registry, I did and who does not, so far.

  Interesting on your first proposal - choose Foxmail in the list of programs that can be selected as default values - Foxmail is not among them. Nor are any other programs that you expect to be in the list, such as Photoshop, Notepad, BitTorrent, WinZip, Clipmate, and in fact most of the programs I have which are alternatives to Ms programs

  Ron

  I don't work for Microsoft either.

• Expose the service as a Web service proxy using the sb Protocol

  Hello world.

  My team and I worked on a project of integration between multiple applications. So we created all the OSB projects necessary to connect applications and now I'm working on a web application that reads several newspapers who leave these integrations in the database in order to watch what happens when they are executed. Right now, I need my web application to be able to reprocess or retry messages that present a problem or are in an error state.

  To this end, we have developed a proxy with a sb protocol that allow us to communicate with other services dynamic proxy just in him passing the name of the proxy, its functioning and the message of the body. And finally, here's my question for you guys.

  How do I expose this last proxy (with the sb Protocol) as a web service so I can consume it for action to reprocess/try again?

  Thank you.

  Don't think that you need a Proxy service with SB Protocol at all. As I understand it, your process will be like this:

  1 web app bed DB logs to see what documents need to be submitted again

  2. web App must call OSB to resubmit the log message to correct the proxy.

  What you can do is create a WSDL based proxy HTTP to OSB for a new presentation, Web application must call this proxy and passes the body, the name of the target (full path) service, target service type HTTP (Proxy or Business), target the operation name (optional, like e-mail or type XML services everything will not associated with surgery). You can add a dynamic routing node in the HTTP proxy that calls the proxy target based on information coming from the Web App.

  SB Protocol should be used in a Proxy service if you want to call a Proxy deployed in a single domain of OSB on another area of OSB or composites Oracle SOA. Here, the consumer will be the Web application, so it needs to be a HTTP proxy and not SB.

  P.S.: You should also consider sending transport/custom headers as well, not only the body for your new design be more reusable.

• Ideas re: ' Connect-VIServer: could not connect using the requested protocol "failure

  I know, it's a matter of weakness, but I hit the wall on this one. I've even got desperate enough that bouncing private LuD, and I tried everything we discussed, but I'm still @ deadlocked.

  I developed and tested several scripts that I am finally ready to go with Prod.

  I get this error when I am trying to connect to Vcenter server or host of the cmndline of vitoolkit (and obviously in scripts).

  «Connect-VIServer: could not connect using the requested protocol.»

  I'm runing the vitoolkit FROM the server VCenter, so I wouldn't exepct the local to be a problem connection. I expect calls the ESX servers as questions) (we have several firewalls in the game). But even once, on-site I would not expect a problem.

  I checked my ports of VC and even more precisely called listener in the connect command, but it does not help.

  I tried to watch the ports through various lines of command, but I don't see anything.

  Any suggestions?

  Add - confirm: $false and it won't be quick.

  =====

  Carter Shanklin

  Read the PowerCLI Blog
  [Follow me on Twitter |] http://twitter.com/cshanklin]

• read the serial port management using the SRM Protocol

  Hello

  I have a gas analyzer that communicates with the PC via the serial port.

  This is the "Industrial VarioPlus SRM".

  I have attached a PDF file that describes the communication protocol.

  I'm trying to decode the data that are sent from the parser, but I can't do it.

  I have attached the vi in which I made some effort.

  Any help is appreciated, at least for a single value in the data stream.

  Thank you.

  
  

• Canon printer does not connect via the IPP Protocol

  I work in a company that sells printers offices/schools/etc. Yesterday, we received a call from a customer indicating that the Copier, we sold them connected not to a new computer they bought.

  I went to the site and noticed that the computers in question were all purchased during 3 months and all loaded with Mac OS X El Capitan. Most was registered on 10.11.3, and some 10.11.2 and 10.11.1. All computers work turned Yosemite.

  We receive a message somewhere in the sense of "Communication error. This printer may not be able to [print], you want to save it anyway? »

  It was a cannon imageRUNNER Advanced C5235. The client declares that if he saved the printer, it would not be able to print, but would still see jams paper, messages and other statutes of the computer printer toner. After attempting to remove and reinstall the printer using the most recent driver available on the Canon Website, we received the same error, the customer received. We escalated it to Canon support, who asked us to choose LPD instead of the PPI for the Protocol, allowing the printer to you connect and start printing on all devices running El Capitan.

  After further research, to my knowledge, the ISB is more recent and has more features that the LPD, although I couldn't find much on it so I was uncertain about the origins of these two protocols, except that they were introduced in the 1990s. I know it's kind of vague, but is better/more recent than PPI LPD? If so, great. Otherwise, is there a way to solve this problem and get computers that run El Capitan to connect correctly using IPP?

  The problem here is that the driver Canon UFR2 or PS that was used on the Mac to print in ADVANCE of Canon C52xx does not support PPI. This is why you must use an alternative Protocol.

  Note that it is possible to print to the C5255 using the PPI, but you need to use the Canon PPDs which means the copier must have the kit installed Postscript printer and you get not the pretty picture base views the pilot UFR2 and PS to give you.

  Second point is that the Canon UFR2 and PS drivers, it is preferable to use HP Jetdirect-Socket to the LPD protocol. He sent larger packets and verifies the status of the target unit - LPD simply sends data to the fixed IP address so if the printer has a problem you don't get this information until you walk up to the photocopier.

  I hope this helps. Answer if you need more information.

• Toshiba Wireless Manager - not possible to choose the authentication protocol

  Hello

  I use for my Toshiba Wireless Manager mobile broadband connections. In a connection profile, it is not possible for me to choose what authentication protocol to use. In the Advanced Settings tab, the authentication section is grayed out. Using the program is mentioned that you can change the authentication settings.

  Concerning

  Post edited by: malo

  Hello

  As far as I know to create a new profile.
  Then you could add the APN, user name, password and authentication protocol
  But my knowledge in most of the cases, the SIM card is detected automatically and no manual work is required. If you do not need to choose the authentication protocol

  Welcome them