/ Q on disks shared with the MP configuration

Similar Questions

• Satellite U300-13U - iTunes has detected a problem with the audio configuration

  Please can someone help me? I have a laptop U300-13U and that you have installed iTunes on it. However, when I open iTunes I get an error message saying 'iTunes has detected a problem with the audio configuration and may not play correctly' which is an understatement - it does not at all!

  I uninstalled, reinstalled iTunes and Quicktime, but in vain. I have searched and exhausted the iTunes support boards but have nowhere either. The sound is fine as I can read CDs with no problems at all. The only suggestion I can get is that there may be a problem with the audio device magnet is not Apple and vice versa.

  Does anyone have AN idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play his music!

  Thank you so much.

  Hello

  I don t use iTunes so I m not an expert player but first of all, you must give us some important information:
  -What operating system do you use?
  -Are you using the factory settings (Toshiba Recovery disk) or your own version of Windows
  -Do you have the yellow exclamation marks in Device Manager?

  OK, iTunes says that there is an audio configuration problem so do you trying to update the audio driver? If this isn't the case, you should try it.
  See the Web from Toshiba site for an update and see what happens. Then validate your result:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Welcome them

• Mac Air 1.3 Ghz i5, 4 GB ram end of 2013 everyone upgraded to El Capitan with the same configuration?

  worried about the going 10.10.5 Yosemite to El Capitan. Especially with only 4 GB of ram. Have 256 GB SSD HARD drive

  would appreciate an answer from people already have the upgrade.problems with the same configuration? slower?

  FWIW, the El Capitan applications are no different from Yosemite. In fact, it is easier on resources in some areas. The main thing you need to worry is to make sure the software and equipment to use is compatible. Make sure you have a good backup in case you change your mind and want to downgrade.

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• Vimeo can be played with the current configuration (tablets only presentation)

  I'm working on a site with configurations desktop, tablet or phone. I have a Vimeo video in all versions, my problem is in the presentation of the tablet. I have a message on the video who said: it can be played with the current configuration. Everything works fine (desktop PC and telephone) in the online site. I don't know what I need to make changes. Appreciate help with this. Thank you, Alan

  PS tried changing the Vimeo with a YouTube video, always get an error on the site online.

  It seems that it was not software based on the Web service.  I published the site from home tonight and everything works perfectly.

• Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any w

  Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any way around this? sounds to me ridiculous

  Contacted Adobe Support and they recommended to configure the new Adobe ID?

• A web site with the IIS configuration network location

  Is there information on how to set up a web site to a network location.  I have a shared directory of Mac that I have access to my Windows Vista pc.  I have a Server IIS Web on this PC and want to test the Mac files with the IIS Web server on the Windows computer.  I created a site in IIS and pointed on the shared drive, this resulted in an error: cannot read the web.config configuration file.  I tried a different approach: create a local site to wwwroot, then create a virtual directory.  This brought the same error: the requested page cannot be accessed because the configuration data of the page are invalid.  I have IIS 7 on Windows Vista Business Edition.

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the forums of IIS. Please post your question in the following link for assistance:

  Link to the forum:

  http://forums.IIS.NET/1047.aspx

• Confused about the disk space with the photo library

  I understand that Photos uses hard links, and that therefore the photo library should not take much more space than the old Aperture library. But in a sense, I think that's not strictly true, and ' t actually takes this amount of space.

  My current photo library is 174 GB. The old library of opening that I imported in April is 155 GBs I have a couple of other files in images, representing perhaps 10 MBs. Finder reports my folder of photos using 330 GBs.

  Worse still, the disk hard integer (which is 500 GB) said I have only about 8 GB of free. When I look at the files that take the place, it seems that the GBs 330 is exact, so the vast majority of the use of the disk is duplicated libraries.

  I kind of thought maybe I had actually an extra GBs 155 or something, because old files of opening were now linked to the photo library. But this doesn't seem to be the case.

  Can someone explain this to me? I want to blow the Aperture library, because I have no intention to never use Aperture again, but I'm afraid that there are files in this library that have never in Photos, so duplication.

  Thank you!

  My current photo library is 174 GB. The old library of opening that I imported in April is 155 GBs I have a couple of other files in images, representing perhaps 10 MBs. Finder reports my folder of photos using 330 GBs.

  Storing hard linked files is reported incorrectly.

  This is because the hard linked files are identical to the original files, and so the storage is counted twice by the Finder.

  See: Six colors: the (hard) link between iPhoto and photo

  The library of Photos that is created from your Aperture library should have approximately the same size as the original opening library, but the image inside the library are stored on the same disk as the same pictures blocks in the original Aperture library.

  But once you start working with the new photos of library, more links will break for the preview images.  If you change a photo, a new preview will created, and who will no longer be linked to the preview in Aperture. It will be saved there less storage, so. Also, if you used a custom size for previews in Aperture, the new extracted in pictures will need extra storage.

  Or, if you use iCloud library synchronization with iCloud may break references.  Original on your Mac could be replaced by iCloud original during synchronization and verification duplicates.

  If you no longer use the Aperture library, move it to an external drive to free storage on the internal drive.  If you discover missing photos in the photo library, you can access the Aperture library on external drive as well.

  See this document on what kind of reader to use: use locally mounted volumes extended, Mac OS X for your Aperture library

• variable single process shared with the single element fifo reading arbitrary values

  Hello

  my request in real-time has a motion control loop and a loop of data acquisition. Before the move, the starting position is read once in the motion control loop and recorded as a shared single process with fifo variable single active element (I want to save only the last value). The starting position is then read several times in the loop of the acquisition of data and compared to the actual position. The movement is stopped in the DAQ loop when the difference between the starting position and the actual position reaches a certain displacement of the target.

  Now to my problem: the starting position is read in the loop of data acquisition of the variable correctly shared in the first round after having been written. Then it keeps read an arbitrary value that I have no idea where it came from. How can this happen?

  I summarize: I write the starting position once and then read it several times to calculate the actual shift...

  Thanks in advance for any help! Kind regards

  Grun80

  Hey,.

  It is a strange behavior, usually the variable should return the last value written. You write the variable in another place of the code too? You debug the application?

  What is the RT platform you are working? Version of LabVIEW?

  I suggest using a "functional Global Variable" and see if you still get this random values.

  Christian

• Windows experience index for two different laptops with the same configuration of maximum output power

  [I have two almost identical laptops Lenovo T61p and running W7 64 Ultimate b: has] has an Intel T7700 processor and 8 GB of RAM. [B] has a CPU of Intel T8300 with 4 GB of RAM. They are clocked at 2.6 GHz and have identical hard drives.

  When the system is running Windows Experience Index, it does to 2.6 GHz. It doesn't matter what is the result.

  When the system B runs the WEI, it becomes 780 MHz. In the end, he will return to run at 2.6 GHz. Needless to say that it will reduce its index to I / 2 of the other system. During any normal operation, the processor remains a 2.6 GHz

  All other values of the indices are similar and irrelevant.

  As far as I checked, the two system has the same configuration of power to maximum performance, I did not miss something. MSCONFIG are also identical.

  Any ideas about where to look to fix this behavior?

  See you soon

  Rolando

  WEI is a meaningless number that does not reflect anything in reality.  You win nothing in this hunt.  Because it is a useless number, that it has been deleted in windows 8

• What is the problem with the BizTalk configuration tool?

  I just installed BizTalk Server 2010 (developer edition) and I restarted my computer, but the Configuration tool will not charge. Instead of loading the configuration tool, a dialog box displays saying "another instance of this program is already running" with the title saying "error". I am sure that no other instances of the configuration tool are already running. What's not here? If anyone can help me, that would be greatly appreciated.

  Hi NateKoepke,

   
  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems with the installation of BizTalk Server 2010. Please correct me that I misunderstood.
   
  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
  http://social.msdn.Microsoft.com/forums/en-us/biztalkgeneral/threads/

• Problem with the SOA Configuration - to be able to configure the FCM or tax supplies - Oracle EPM 11.1.2.4

  Hello gurus,

  I followed the steps below to configure Oracle SOA on Windows Server 2008 R2.

  1 update the file hosts with the IP and hostname

  2 disabled IPv6 teredo

  netsh interface set disabled state Teredo

  3. restarted the machine

  4. start SQL server and SQL Agent services and browser.

  5. a SOA database created with owner - his

  6. run the following queries on the database - master selected on the upper left corner of management studio

  ALTER database SET of SOA READ_COMMITTED_SNAPSHOT ON

  ALTER database SOA COLLATE SQL_Latin1_General_CP1_CS_AS

  7. restart of SQL server and SQL agent services

  8 copied the instjdbc.sql file and the file x64sqljdbc.dll from the WL_HOME/server/lib to Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\

  9 renamed the file x64sqljdbc in sqljdbc.dll

  10. navigate to C:\Program Files\Microsoft SQL Server\100\Tools\Binn and run the following command

  SQLCMD. EXE "FUSION1124" s - U SA Pei test #123-i c:\log.txt o "C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\instjdbc.sql '.

  11 activated XA transactions in Windows-> DTC Local components services

  12 restarted SQL server and SQL agent services

  13 copied rcuHome utility for drive E and repositories created for SOA

  14. the value of Unicode support - NO (tried with Unicode on YES and NO both setting)

  15 PREFIX - value DEV

  16 selected - services Infrastructure, SOA, Messaging user and metadata Service

  17 passwords schema - test #123

  18 repo created successfully

  19. restart of SQL server and SQL agent services

  20 copied directory SOA for drive E

  21 install SOA - setup.exe - jreLoc E:\Oracle\Middleware\jdk160_35

  22 oracle Middleware home - E:\Oracle\Middleware\

  Directory of Oracle Home - Oracle_SOA1

  23 configuration started Oracle SOA

  24. create the new Weblogic domain

  25 selected

  -Oracle SOA suite

  -Oracle Enterprise Manager

  -Oracle WSM Policy Manager

  -Oracle services JRF asynchronous Webservices

  -Oracle JRF

  26 domain Name: EPMSystem

  27 powers

  Username - weblogic

  Password - test #123

  28. mode of production

  29. component JDBC schema (all selected)

  Seller: SQL

  The schema owner: his

  Schema password: test #123

  DBMS/Service: SOA

  HostName: FUSION1124

  Port: 1433

  30 connection succeeded

  31 creating the field of SOA

  32 restarted SQL server and SQL agent services

  STARTING THE SOA SERVICES

  31 start Weblogic Admin Server

  32. start the server managed by SOA

  Navigate to the following location in the cmd

  E:\Oracle\Middleware\user_projects\domains\EPMSystem\bin

  Run the command - startManagedWeblogic.cmd soa_server1

  While the Weblogic Admin service starts successfully, the SOA service does not start correctly. The "soa-infra' down remains.

  I'm stuck and not able to resolve the issue for some time now. -What are the steps I doing wrong or missing?

  Please advice.

  The problem is resolved.

  Perform step 11 first and then step 10, which would solve the problem.

• Estimated days-men to install OBIEE-FA with the standard configuration

  Hi all
  
  I'm totally new to OBIEE. I have installed the OBIEE Foundation. May I know how much time does take to get OBIEE-f installed and configured for a beginner?
  Could you please give me some advice or Ref materials to speed up my installation?
  Your help is very appreciated.
  
  Thank you very much.
  
  Eddy

  Hi Djelam22,

  Below you will find my vision of time should implement a module of OLIVIER:
  -A week to install all components (OBIEE 11 g, DAC, OLIVIER). During this week of you write an installation guide with all the print screen to reproduce your installation on a different environment.
  -Two weeks to set up a module of OBIA and load data into your OBAW (Oracle Business Analaytics Warehouse) and test data (just to see if you have data in your report). This step should make the workshop with businesses to configure your module (definition of the value of the configuration file)
  -One week to implement security as you want your username.

  So in 4 weeks, you might have an implementation for an environment, but without comprehensive testing, without customization.
  You can reduce the time with no installation guide, a workshop with companies to configure your module OBIA, no security. It depends on what you want in a first time.

  Best regards

  Benoit

• Incompatible drive with the system configuration

  Installation drive Xl all my icons turned into symbols Adobe and does not open. Dialog box indicates that the protected mode is not compatible with the configuration of the system, but still does not open even if I click to turn off protected mode. I can't open Adobe Reader either. I use Windows 7

  See http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

• Deliver Services shared with the Userid Corp.

  Hello
  
  I am facing a problem with the nicks Corp. in Shared Services. The problem is that I am able to add Corp. user IDS to a group, but I'm not able to remove some of them from the group for a reason any especially these corp ID of user who have been added weeks or months.
  
  What I've noticed, is if I add a user ID Corp. today and try to remove it today itself it's letting me do, but these IDS corp that I added to the weeks before group is not letting me remove. I tried to repel the Userid from corp right left and then saved the changes. It displays the message that the Group has changed, but when I go back and check in the group that I find the user here on the side right, where it shows all the members of the user. Not sure why this is happening.
  
  Any ideas on that? Please share your entries.
  
  Thank you.
  ~ Hervé

  -Update

  We understand that this problem is caused by a bug that is there in this version 11.1.2.0.

  Thank you!
  ~ Hervé