Q re warning on a data store: use the store of data on disk

Similar Questions

• Does not start after using the recovery Toshiba Tecra M5 - disk

  After using the restore on my Tecra M5 CD, the computer cannot even start!

  What to do in this situation?

  Hi jbdoktor,

  Does that mean exactly?
  Now, what happens if you start the computer?

  Sorry, but without this information it is difficult to help you. Maybe you should try the recovery again disk

• How to use the adapter USB Y with disk HARD 500 GB V63700-A

  Hello

  My V63700-A500GB external HARD drive is hard to work into my USB2.0 4 port adapter.

  I thought that maybe he needs more power goes into it.
  So I bought a USB - Y, but I can't find out how to use it.

  It has 2 male son of USB connector and a very narrow little that's not in taking wide slim HDD above.

  Anyone who uses these things to advise me how to?

  ... Thank you
  .. .Nick

  Of course you bought the wrong cable.
  I guess you need a USB 3.0 cable similar to [this | http://datalocker.com/wp-content/uploads/2013/09/usb3_cable_white__800px_wartermark.jpg] a

• How to add the warning message when you use the function 'print' in Adobe LiveCycle Designer

  I'm trying to make the pdf document for my business that requires the addition of a warning message while everyone to use the function 'print' page...

  Does anyone know how to add the warning message about LiveCycle Designer

  Also my supervisor mentioned something using "nag" If that sounds at all

  Not in the XML code, in the case of script of pre-publication of the "print" key. If you don't have the script editor to the top on your version of designer, you can press ctrl + shift + F5 to bring it.

• How to use the utility disk first aid for hard drive internal el captian

  How to use the utility disk first aid for hard drive internal el captian

  Select the drive and click first aid.

  If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.

• Satellite A100-549: BSOD after I used the recovery from another PC

  Hello.

  Had a few probs with my laptop and decided to recover it using another pc recovery disc.
  I get the laptop is a Toshiba a100-549. Unfortunately for some reason I can't disks that were originally with her.

  The opertaing system is Windows xp. The disks I got with a Vista.
  It loads OK but goes to a blue screen after 30 seconds and restarts. Is there a reason for this and can I do.

  I think I may need to get your hands on a good drive and load it on again.
  Someone at - it copies of drives for this laptop and able to send me their. I'll gladly pay for them...

  Colin

  Hello

  Don t user recovery drive to another PC, because it won't work.
  You can use a clean Windows OS disk or the Toshiba recovery disc.

  Why? Because the recovery disk contains an image. The image is a package containing a Windows OS, drivers and other software.
  If you want to use the recovery from another PC disk then all the drivers, tools and software distributed for this PC will be loaded on your Toshiba laptop.
  This can cause the BSOD!

  So if you n t have the Toshiba recovery disc then you should use MS Windows CD!
  Toshiba drivers can be downloaded from the Toshiba page!

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• Good way to use the concurrent data store

  Hello

  I'm developing a multithreaded C++ application that uses the C++ of Berkeley DB Library.

  In my case, I have several databases that I composed in a wooded area. It is important for me to use an environment because I need control over the cachesize parameter.

  I don't need no guarantee of transaction and have for most of the readings, so I decided to use the "simultaneous database.

  I first pre-fill all databases with a number of entries (configuration single-threaded phase) and then work on it at the same time (for most readings, but also insertions and deletions).

  I tried all kinds of different configurations, but I can't work without specifying DB_THREAD as a flag of the environment.

  I don't want to because then access all handles is synchronized sequentially according to the documentation:

  "... Note that the activation of this indicator will serialize calls to DB using the handle between the threads. If

  simultaneous scaling is important for your application, we recommend handles separate for each thread opening

  (and do not specify this indicator), rather than share handles between threads. "

  (Berkeley DB QAnywhere C++)

  So I tried to open the environment with the following indicators:

  DB_CREATE | DB_PRIVATE | DB_INIT_MPOOL | DB_INIT_CDB

  All data in this environment handles are open only with the DB_CREATE flag.

  So, since my understanding this same basic access handles need to be synchronized, I opened separate handles foreach database for each thread (opening the handles is still single-threaded).

  In my first approach, I have only made use of the object of global environment. Which does not work and gives the following during operations error message:

  DB_LOCK-> lock_put: Lock is no longer valid

  So I thought, since the same handle global env is passed to all handles separate DB, it is perhaps a race condition critical on the handful of approx.

  So in my next test, I opened also handles separate EPS in each thread (and db handles owned each).

  That does not produce an error in db, but now it seems that each thread sees its own version of the databases (I call it stat early in the life of each thread and he sees all of the empty dbs).

  What is the right way to use the concurrent data store? Each thread should really open his own set of db handles? What about the number of open handles env?

  PS: Without specifying that the DB_PRIVATE flag seems to do the job, but for performance reasons, I want all operations to perform in the cache and do not specify product DB_PRIVATE average of several writes to the disk for my scenario.

  Thanks a lot for your help.

  CD (simultaneous database) allows a single editor with multiple drives, access to the db at a given point in time.    The handle for the writer doesn't have to be shared with readers.   If you share the DB handle then calls are synchronized, but if each thread has its own handle DB then this is not the case.     Since you have an environment, DB_THREAD must be at the level of the environment.   This will allow the sharing of the environment handle.     This type of error "DB_LOCK-> lock_put: Lock is no longer valid" you can provide us your code so we can take a look.   Also what BDB version are you using?

• Detach a lun using the data store name?

  All (or Luc lol)

  I am wanting to use the disc to detach function, but instead of passing naa.id, I wish I could pass the name of a data store already disassembled data store to get the id of the naa. I would also like to pass a list of hosts, rather than to all guests who tied it.  I watched Alan functions but its going to each host rather than being able to move from a specific host.

  I took a slap at him earlier, but I'm a little confused on how to do it.

  http://www.lucd.info/2011/11/25/LUN-juggling-in-vSphere-5/

  Any help?

  With a small change to the functions of Alan, you can use a parameter of VMHost.

  In there, you specify one or more ESXi servers where the data store must be dismounted and detached.

• Creation of data store in ESXi 5 using the CLI

  Hi all

  I tried to create script to store data on a local drive to ESXi 5. I found lots of instructions for 4.1 whereby you use partedUtil to initialize the disk first and then use the vmkfstools command to create the vmfs volume and then use the command vmfs_create to vim - cmd to create the data store. However, version 5, I could only (virtually ghetto) where they don't use vmkfstools followed partedUtil and did not use vim - cmd vmfs_create. Someone can tell me if that's all that is required, or do I still need to use vmfs_create.

  Kind regards

  Vlad

  Vlad,

  You don't need to use vim - cmd vmfs_create option, the command vmkfstools appearing on my blog, which is used to create the VMFS volume, which in turn provides you with a VMFS data store. Vim - cmd did essentially the same thing if you do not use the vmkfstools command

• new-store data using the name of runtime

  Hello

  I know the name of runtime - vmhba2:0:0:201 and I would like to create a VMFS data store using PowerCLI. In the past, I'm sure I could use the runtime for the path parameter, but today I need the canonical name.

  So either 1) how to create the data store with the info I have, or 2) how obtain the canonical name of the runtime name would help me greatly.

  Thank you, Andy.

  Or all at once

  $esxName = 
  $runtimeName = "vmhba2:0:0:201" $dsName = "MyDS"
  $esx = Get-VMHost -Name $esxName $lun = Get-ScsiLun -VmHost $esx | where {$_.RuntimeName -eq $runtimeName}
  New-Datastore -VMHost $esx -Path $lun.CanonicalName
  

• How to associate the data store of the target for the newly created using the API Interface

  How to create a new Interface under project, need to associate the data store target for mappings for the interface by using APIs "."
  
  Able to get the associated interface created temporary data store. You need to associate a new database model. How to do this using the API
  
  My code is,
  
  String pCode = "DEVELOPMENT";
  Context OdiContext = (mgr.getFinder (OdiContext.class)) .findByCode (pCode) (IOdiContextFinder);
  System.out.println (Context.getLastDate ());
  
  OdiInterface pInterface = new OdiInterface ("toDeleted_Interface", pFolder, context);
  pFolder.addInterface (pInterface);
  
  The list of ds < DataSet > = pInterface.getDataSets ();
  < DataSet > iterator itr = ds.iterator ();
  DataSet ds_nxt = itr.next ();
  
  PAlias string = "HRA_TMPL_DEFNS_TL";
  pOrder int = 0;
  OdiModel pModel = (mgr.getFinder (OdiModel.class)) .findByCode ("FILE_PM_MODEL") (IOdiModelFinder);
  String pName = "HRA_TMPL_DEFNS_TL";
  OdiDataStore pUnderlyingOdiDataStore = new OdiDataStore (pModel, pName);
  SourceDataStore pSourceDataStore = new SourceDataStore (ds_nxt, false, pAlias, pOrder, pUnderlyingOdiDataStore);
  ds_nxt.addSourceDataStore (pSourceDataStore);
  
  TargetDataStore tdata = pInterface.getTargetDataStore ();
  
  If (tdata.isTemporaryDataStore ())
  {
  }

  http://odiexperts.com/creating-interface-for-single-source-and-target/
  http://odiexperts.com/creating-temporary-interface-using-ODI-SDK/

• iPhone 6 s ios9.3 I can't use the App Store or update my application?

  I have 6 s ios9.3 phone I can't use the download App Store application and updated the app?

  Hi adynorway,

  I understand that you can not update the applications or access the App Store on your iPhone 6s. Let's see if we can get smooth it

  Now, I know the article below relates to problems with connecting to the iTunes Store, but the steps are relevant to the App Store as well. I would make sure that the Date and time is correctly defined or set to automatic.

  If you cannot connect to the iTunes Store
  https://support.Apple.com/en-us/HT201400

  Nice day

• My wife and I have laptops and we want to combine the data both on a Mac. Including two Itunes accounts. This is possible by using the migration on each PC asst?

  In what concerns the transfer of data from a PC to a MAC, my wife and I have laptops and we want to combine the data both on a Mac. Including two Itunes accounts. This is possible by using the migration on each PC asst?

  You can bind the whole apple ID using family sharing. If you have trouble doing this, you can go to the apple store, and they would be happy to help you.

• Can I use the recovery CD without losing all my data?

  When I turn on my laptop satellite I get a message saying that the Windows system file is missing or damaged. The standard fix seems to be to repair using the Windows CD of Installation which of course I did not. I've also seen suggestions that sometimes chkdsk will fix the problem, but I can't run no more.

  The insert on the product recovery disc warns that all created files since I bought the laptop will be deleted. However, when I load the utility, I get two options. The first is to reinstall XP on my entire hard drive, and he told me that if I do that, I'll lose all my files. The second option is to install XP on a separate partition on my hard drive. He said nothing to lose all my data. Am I right in thinking that this second option will be to install XP, say, E: and I will then be able to run chkdsk on C:, or at least access C: and back up all my data?

  My deep gratitude for all the advice!

  Hello

  Sounds like you have an old Win XP Recovery disk

  Of general use of the Toshiba Recovery disk would be to format the whole HARD drive and therefore existing partitions will be deleted too I m not quite sure on the second option, you mentioned, maybe you would be able to choose a partition during the recovery process and would be able to install the operating system only on this partition without formatting the HARD drive but I m not 100% sure because it seems to be a former recovery procedure

  I would recommend another solution. You want to access the HARD drive to back up data. Right? Why you n start t Notepad using a Livecd such as Knoppix. In this case nothing would be installed on the HARD drive and the data on the HARD drive would not be affected so you can access important data and can move a HDD connected USB or flash memory stick

  After that, you can run the recovery procedure and might install Win XP on C.
  What do you think of this