Does not start after using the recovery Toshiba Tecra M5 - disk

Similar Questions

• My copy registered and checked for XP Pro SP3 does not start after changing the motherboard. Second problem is that I can't find my original install of XP Pro disc.

  After failing to find the source of reliable performance from my PC, I decided to bite the bullet and replace the motherboard, memory and the CPU. I installed a triple base 435 Athlon and a motherboard Gigabyte MA74GMT. Awarded PC again started the first time - but Windows will not, I get a number of options but none work - safe mode brings up several lines of messages on the partition of multi (0) disk (0) rdisk (0).

  A previous post suggested that a similar message meant some kind of malware but if I replace the old motherboard, processor and memory Windows works very well - in fact I use it now.

  Do I have an option but to reinstall Windows from a CD? Otherwise I have a problem - I can't find the installation discs for each piece of software except my Windows XP Pro! I do repair discs?

  Thanks for your help.

  Hi DaGeLi,

  · Provide us with the complete message you receive.

  Follow the methods below:

  Method 1:

  You were able to start the first time, you can try to boot to the last known good configuration and check the results. Link to get the procedure please refer to: how to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  Method 2:

  If it doesn't then you can follow the procedure from the below mentioned link. As you do not have the Windows XP CD you can follow the procedure if you have already installed on the computer to recovery console

  How do I recover from a corrupted registry that prevents Windows XP startup:http://support.microsoft.com/kb/307545

  Otherwise, you may need to make the boot floppies. See the link for the procedure below:

  http://support.Microsoft.com/kb/310994

  You can also contact the manufacturer of the system to get the Windows XP CD.

  For reference: how to fix a computer that does not start:http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think

• Computer does not start after running the utility Boot Lenovo.

  Hello
  I replaced the power supply with a CX550M of Corsair, increased memory by exchanging the 4 GB to 8 GB for a 16 GB total, I added a hybrid 2 TB Seagate HDD and all worked fine until yesterday, about 1 month.
  Yesterday, I decided to run all the tests of the Lenovo startup disk and after that I restarted, the computer does not start.
  When I press the power button, the fan starts and it stops after 3 or 4 seconds and nothing happens, the monitor says no signal, I removed the external USB disk and printer, I reoved the second drive and the same thing heppens.
  Any idea what this problem could be? Would it be a bad power supply?
  Thank you

  Mario

  Resolved, I erased the memory CMOS, moved to following ankle boot, back up the cmos.

  Thank you

• Black screen, high regular of underscore on the left does not start after reflashing the BIOS F.38 on HP2000-363NR

  HP2000 363NR, recently tried flashing the BIOS F.38 (here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116227-1&cc=us&dlc=&lc=en&o... ) to solve a problem of overheating.

  Well, it was a mistake.

  Now it does not start at all.

  Fans spinning upwards. Hard disk rotates.

  By pressing ESC, F1, F2, F9, F10 and F11 at startup to give appropriate (fast!) messages but then go to the same place:

  Black screen with flashing underscore in the top left. Leave it to this screen has no effect.

  Never see no text except the quick messages in the lower left (or "Press the ESC key for the system menu" down left based on nothing).

  Out and the relocation of memory does not work. Boot with a DIMM module does not work. Now hold power for one minute while the battery and plug on does not work.

  Battery is fully charged.

  OS is Windows 7 64 bit Home Premium, came with the laptop.

  Is it possible to return this BIOS?

  -Me

  Thanks to Xraytim in the post below, short-circuit the battery CMOS me returned to the previous BIOS. Need to remove card system as a whole to achieve this * beep * connector, but 34 screws later (34 = some # between 15 and 50), BIOS is back, problem solved.

  Thanks for the forum!

  -Tim

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/DV9858ca-won-t-boot-after-BIOS-update-won-t-power-with-AC/TD-p/555547

• T400s does not start after cleaning the keyboard

  Hello. I cleaned by T400s keyboard today after a few juice reaches the keys and the laptop does not start anymore. I removed the battery and the power cord, tried to deceive the 10 times, press the power button / stop, no still no results.

  Reset the CMOS does solve the problem?

  At first glance it seems that the laptop is powered LED fingerprint reader is turned on, but it turns off as soon as I unplug the charger.

  Any suggestions? Thanks in advance.

  This probably means that your keyboard is dead and need a replacement, which is pretty cheap from ebay.

• OptiPlex 755 USFF does not start after changing the cmos battery

  I have a desktop Optiplex 755 USFF requiring the cmos battery to replace. After the replacement of the computer will not start. It brings up the menu windows start, the sasfe mode, safe mode with network set mode command prompt, security, last know good configuration and boot normally. Any option will bring to the top of the WIndows XP loading screen and then re-boot of the computer right back to the start screen. A big loop. I can get the hard drive to boot in an Optiplex GX280 without problem. I was told of the motherboard needs to be replaced, but I changed the units of the system and the same thing with this hard drive.

  I tried to reinstall the operating system and get all the way to "starting windows" and then the blue screen stop error message 0x0000007B (0xF7A10524, 0xC0000034, 0x00000000, 0x00000000) dead. The computer is WIndows XP SP3, 1 GB of ram with 80 GB hard drive. It seems that the Setup program does not recognize the hard drive.

  Any help would be appreciated.

  After several hours of experimentation, I finally found the correct BIOS settings in order to get the computer to boot. There are three BIOS settings that need to be changed or check settings by default so that it can work. SATA 0 must be activated, SATA operations must be changed from AHCI, ATA and in the modular Bay, by default "far-sighted" should be replaced by the IDE. Save the settings and start the computer to the right upwards.

• VCenter 5.1 does not start after joining the domain

  I have a VCenter Server 5.1 that I had to join the domain. The domain controller has died and I had to rebuild the domain from the ground controller. It is early in the generation of the environment and the user does not backup turns yet. The SQL database is on another virtual machine which I added to the domain and at least I think I have fixed the AD accounts on the SQL Server. I ping the SQL server machine vcenter server. I also have a Web server that uses the SQL Server and it works correctly. All thought that the web server uses a SQL account and not a Windows account. Having said that it's the VCenter error I get. I don't know where I can get more detailed logs. VCenter service dies as soon as I try to start it.

  Here's the log of events

  Application error event ID 1000

  Name of the failing application: vpxd.exe, version: 5.1.0.35539, time stamp: 0x514d6239

  Name of the failed module: vmacore.dll, version: 5.1.0.35539, time stamp: 0x514d5992

  Exception code: 0xc0000005 fault offset: 0x00000000000022f7 failed process id: 0xbd0

  Start time of application vulnerabilities: 0x01cefb39789687d1

  The failing application path: D:\Program Files\VMware\Infrastructure\VirtualCenter Server\vpxd.exe

  Path of the failing module: D:\Program Files\VMware\Infrastructure\VirtualCenter Server\vmacore.dll

  Report ID: bf5595b0-672c-11e3-958d-000c2944f450

  Just rebuilt the VCenter server, was faster than to try to fix it.

• Satellite Pro S300-120 does not start after replacing the CMOS battery

  Hello

  My friends laptop - a S300-120 - was having a few problems.

  I replaced some parts about this before, including a screen crack with no problems.

  However, he began to refuse to start saying "out of battery CMOS, Press F1 to enter setup". Of course you would have to do this, set the date and time, except & restart only to get the same message. We have replaced the CMOS battery with a with the same serial number and now the laptop will not boot.

  It does one of two things.

  It is one) seems to turn, turn to the top disk & CD player, cooling fan is 100%, then flashes the POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.

  Or (b) turns on, turntable, does not turn up to cooling fan, POWER ON witness remains stable, no response from the keyboard or LCD.

  I re-assembled the laptop several times & can not find all the missing fittings or obvious signs of damage.

  The only thing I can think is that the motherboard has been damaged - somehow find replacements is delicate.

  Any ideas?

  Hello

  (> It is a) appears to turn on, turn the disk & CD player, cooling fan goes to 100% and then flashes him

  POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.
  Usually, if the voltage in abnormal feeding malfunctions when IN DC will be blinking orange.

  In my opinion, it looks like a problem with the motherboard :(
  Eventually, you will need to replace the mobo ;(

• Does not start after replacing the cmos battery

  HP m8430f, Vista Home Premium.  Worked very well but sometimes had to restart using "pulsed" F10 (5 seconds) then wait 5 seconds, and then F5, then ENTER, F10, then ENTER.

  I suspected the CMOS battery, so I removed it.  He tested "fair."  Got a new CR2032.  He attached the test counter, so it's okay  "I WAITED ALL NIGHT BEFORE REPLACING.  But the computer does not restart.  I went through the steps above and still no luck.  What to do next?  Thank you, Joe

  FIXED!  I removed the battery (I had to remove the sound card to get in the first place to the battery).  I waved it around a little when you reinstall.  Now it's working.  What I've done, I have no idea, but it works now.  Sorry for the post, but I was desperate.  Joe

• WINDOWS 8 PRO DOES NOT START AFTER UPGRADING THE BIOS

  ACER Aspire 4730z

  I just updated my BIOS version. And after the easy upgrade restarted my laptop. And boom. My Win8 is not start now... help me :((

  Hello

  You will need to maybe get into your bios and restore the order of boot device... You would think that would be already fixed properly, but sometimes it isn't.

• VCenter Service does not start after changing the port number

  Hi all

  Accidentally, I changed the port number for the Vcenter server from the portal of VCenter 10443 and dint realize that the Java application uses 10443 so.

  Could not start the server vcenter service, because its raise an error saying 10443 port is already im currently byt used another application.

  I tried to stop the Java service, in order to start the vcenter service and make changes to port again, numbers but I am unable to stop the java application.

  Please, if anyone knows how to change the number of Vcenter via config port or any other way, please throw a comment... Its much appreciated.

  Thank you

  Nirmal

  If you use the MSSQL database, locate WebService.Ports.http in the VPX_PARAMETER table and change to the correct port.

• Database does not start after losing the current log file.

  Hello
  
  I'm working on oracle 10.2.0 by mistake I lost my current log file. and I have no backup of it. my database is stopped. my database is in nonarchivelog mode.
  
  I use the command sequence to overcome
  

  SQL> shutdown immediate
  ORA-01109: database not open
  
  
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup mount
  ORACLE instance started.
  
  Total System Global Area  536870912 bytes
  Fixed Size                  1250044 bytes
  Variable Size             297798916 bytes
  Database Buffers          230686720 bytes
  Redo Buffers                7135232 bytes
  Database mounted.
  SQL> DROP LOGFILE 2;
  DROP LOGFILE 2
       *
  ERROR at line 1:
  ORA-00950: invalid DROP option
  
  
  SQL> alter databasE drop logfile member 'D:\oracle\product\10.2.0\oradata\NEO\REDO02.LOG';
  alter databasE drop logfile member 'D:\oracle\product\10.2.0\oradata\NEO\REDO02.LOG'
  *
  ERROR at line 1:
  ORA-00361: cannot remove last log member
  D:\oracle\product\10.2.0\oradata\NEO\REDO02.LOG for group 2

  any suggestions
  
  Thank you
  Umesh
  
  Published by: Umesh Sharma on November 27, 2008 05:30

  With DB in MOUNT State try as follows:

  SQL > recover database until cancel

  type to cancel immediately, if necessary, then

  SQL > alter database open resetlogs;

• Windows does not start after changing the partition with external software

  Hello

  I messed up and followed some bad advice.  Water under the bridge, but I want to recover my bootcamp partition if possible.  I've seen several messages with the right process, but decided to post hear instead of assumptions.  I am running OS X El Capitan on an early 2011 MacBook Pro.  My 256 GB SSD is a bit pressed and tried to be too stingy with the Boot Camp partition, so my current troubles after resizing.  I have 10 Windows on the bootcamp partition.

  I'm going to throw a bunch of data from my survey here.

  Capella: ~ list of the ronh$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 250,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 190,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 58.7 GB disk0s5

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 190,2 disk1

  Logical volume on disk0s2

  B6DC811B-004D-4245-83C9-8FAA0B51FD9E

  Unencrypted

  Capella: ~ list of cs ronh$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 487E3580-D1BE-4A6D-A33C-38C8DD8ABA34

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 190546800640 B (190.5 GB)

  Free space: 19005440 B (19.0 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 190546800640 B (190.5 GB)

  |

  + -> 37BE876E-8E51-47C3-8D62-001EC021DE56 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +-> Logical Volume B6DC811B-004D-4245-83C9-8FAA0B51FD9E

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 190175473664 B (190.2 GB)

  Reversible: Yes (no required decryption)

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  Capella: ~ ronh$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 250059350016; SectorSize = 512; blocks = 488397168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 488397167

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 372161720 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  372571360 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  373840896 1024

  373841920 114554880 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  335 488396800

  488397135 32 table dry GPT

  488397167 1 dry GPT header

  of gdisk.

  Command (? for help): p

  Disk/dev/rdisk0: 488397168 sectors, GiB 232.9

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: FD5932B4-069B-4CCE-A2EE-99AB5720CA17

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 488397134

  The partitions will be aligned with the boundaries of sector 8

  Total free space is 1365 sectors (682,5 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 372571359 177.5 giB AF05 Macintosh HD

  3 372571360 373840895 619.9 MiB AB00 Recovery HD

  5 373841920 488396799 54.6 giB 0700 BOOTCAMP

  

  It is worth spending time to recover?  Thank you.

  Ron

  1. can you describe the problem and the steps you took to get here?

  2 can scroll you down to the next MS data (after that highlighted) and press 'p' to the list of files? Press ESC, once only, to return to this list.

• T530 does not start after upgrading the bios to V2.65

  Hello..

  I flashed the Bios to V2.65 under Win 10 via Lenovo Systemupdate.

  After the restart I had set default Bios and save the changes.

  Start the laptop it hang in a window to select the boot device.

  When I press on my Samsung SSD EVO nothing happened.

  I'm trying to reinstall the Bios with boot-CD. Tool said: there is no need, organic cause is real.

  Downgrade to old Bios in possible (?) not...

  It please can someone tell how to fix this?

  It comes to my work machine, and this is a disaster!

  Thanks MajorM

  Hello..

  found the solution...

  > Disable menu security-> "secure starting".

  > Start menu: UEFI/Legacy Boot-> legacy set or both

  too long, I remember. I never had problems with the bios updates.

  but it was my last... never touch a running system

  See you soon...

  MajorM

• Apps does not start after reformatting the drive

  Recently, I turned off my creative cloud on my main machine apps because I need reformat the boot partition. After the reformat everytime I try to run an application, I wonder to sign, once the thank you screen the app will not launch (except Photoshop). Everything works fine on my laptop school.

  I'm on OS x 10.6.8. Also, I use Retrospect to clone my system to the reformatted disk. I'm suspicious that this might be the cause, but I'm also worried about making things worse if I try to reinstall a new system.

  Installation of a new system solved the problem