QBE and the field date

Similar Questions

• Update the field Date according to the date of another field

  Hi I have a field called "contract end Date" which I update manually according to the contract, and a field called "notify contract end Date" I want to be updated automatically with the "end of contract date" - 45 days.
  Is this possible via workflow? can someone give me the syntax that works? If I want to manually insert the value of the field 'Date to end the contract to notify' it will overwrite it?
  Thank you, David

  Hello!

  Create your workflow on your object type, select the before saving the trigger modification event, put the following condition:

  [< contract end date >] <>MEADOW ("< the contract end date > '")

  And in action, update the field End Date of the contract to notify with end Date of contract - 45 and check the replacement value. You contract end Date field must be with the type date.

  I hope this will help, do not hesitate to ask for more!

  Max

• I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  Do you still have the MBP? If so you can manually copy and paste the files you need.

  If you do not have the pro more, you need to buy a USB key and plug it into the MBA... use it as a target. Once you have a system file of the previous laptop again, you have to manually choose what to copy across.

• Error: 0xc000012f and the KERNEL DATA PAGE FAULT

  My son has a laptop of game.  Since last week, he experienced extreme problems.  A constant if the following errors: 0xc000012f and the KERNEL DATA PAGE FAULT.  Although I'm not technologically savvy, I tried the obvious in running virus scan and visiting different communities for troubleshooting tips.  When you run the antivirus (paid service) analysis, the system hangs and the system restarts.  I attended ASUS website in the hope of getting more advice than to have to provide access to the laptop of my son to a technician who gave me some insurance for the better part of 45 minutes that he help and troubleshooting problems.  He highlighted a very detailed chart of downtown action (reliable?), which looked pretty serious.  Suffice it to say, the conversation ended when he asked a one-time fixed fee of $200.  When I refused, he went to stop everything.  I would simply like to take any action that will further damage the laptop of my son. I paid $3K for this system.  Is someone can you please help me solve these problems?  I was going to buy a registry cleaner but was informed in an online community chat room not to do so that these products are not reliable.  Thank you all in advance for your review and taking the time to help me.

  Original title: need assistance immediately please.

   We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found here

  If you have any questions regarding the procedure, please ask

  
  

  I find the files DMP prayed and tried their zip.  I received the following: file not found or no read permission.

  I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the 'hard drive' was "fried".  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB), this is the info on the box, to replace my 750Go son.  He said that, even if was less "room" it would "fly".  The original price was $ 200 and climbing!  Give me the question my faith in humanity at this time.  Is not relevant to the prey on someones lack of knowledge.  You and the other hand, all those who try to make a difference... who are trying to help is welcomed.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

  I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the "hard drive"was"French fries".»  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB - INFORMATION ON LISTED), to replace my 750Go son.  He said that even if it was less "room" it would "fly".  The original quoite was $ 200 and climbing! Give me the question my faith in humanity at this time.  Seems very inappropriate to prey on someones lcak of knowledge.  You on the other hand and those who try to make a difference... who are trying to help, should be commended.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

• Windows Live Alerts to the email address and the password, date of birth, ect... to veryify the e-mail account is active for real?

  Victorinox original title: Windows Live Mail alert.

  WIndows Live Alerts to the email address and the password, date of birth, ect... to veryify the e-mail account is active for real?

  Hello

  The question you have posted is better suited to the support of Windows Live Mail. I recommend you ask your question to the Windows Live Mail support for assistance.

  Hope the helps of information.

• I get a Script Error failed. I think it is because the domain name is on page 1 and the field with the calculation is on page 2.

  I get a Script Error failed. I think it is because the domain name is on page 1 and the field with the calculation is on page 2.

  The formula is just + Cash.  I don't know how to tell him to look on Page 1.  If I use the same domain on Page 1, the formula works so I know that this is not something in the name of the field.

  

  It received NO response

  Page1.cash should do it. If not, you can use CTRL + click to enter its name in your script.

  1. Select the field that you add the script.
  2. Scroll the design view until you can see the object whose name you need. (Is not necessary if the object is already in mode)
  3. Click inside the script window to place the cursor where you want the name of the other object.
  4. Hold down the CTRL key while clicking the object whose name you need.

• What port bulk charge and reset the field data, using SSL?  Are there more ports beyond 7002 just?

  Hi, we have short components configuration problems in an implementation of SSL Linux 64.  The rest of the components work, but not the load mass and reset the data domain.  We believe that this could be a problem to port because the environment is locked by defalut.  7003-8000 ports will not be open by default.

  On the side of the design, we have the arguments defined VM as below, which appear correct.

  Djavax.net.ssl.keyStore=/disk1/Oracle/Middleware/user_projects/domains/endeca_integrator_service_domain/security/ssh/endecaServerClientCert.ks-Djavax.net.ssl.keyStorePassword=***-Djavax.net.ssl.trustStore=/disk1/Oracle/Middleware/user_projects/domains/endeca_integrator_service_domain/security/ssh/endecaServerTrustStore.ks-Djavax.net.ssl.trustStorePassword=***

  any thoughts?

  You can configure the port ranges that short Server will use.  This applies to both ports of the primary for web services (usually 7001/7002 for Non-SSL/SSL) as well as the underlying ports that are listening on the areas of individual data.

  Almost everything is going through the ports of short primary server (7001/7002) to lock things should not be a problem, as the "traffic" would come from the local computer.  That said, by exploiting the essential ingest functionality requires a direct contact between Integrator (or Integrator Server) connection and the data domain.  If the ports are not open and inclusive tent ingestion of a different area, you'll get failures.

  As with anything related to SSL, I recommend always get your sorted environment (open ports, firewall, etc.), then activation of SSL.  If you are not sure about ports AND you are not entirely sure of the configuration of SSL, it can be very difficult to solve the two simulanteously.

  Patrick Rafferty

  Branchbird

• As of the field Date is not displayed

  Hello

  I have a date custom field where I have to select a date. I used it for the touchscreen. Now I want to implemnt it in no touch. But to not touch, I am able to select the date, but it does not appear in the field. I used a flag that I've initialized as false. I write a method like below:

  public String getDateFromPicker() {
          String format = "MM/dd/yyyy";
          SimpleDateFormat dt = new SimpleDateFormat(format);
          String date = dt.format(new Date(getDate()));
          if (flag ){
              return date;
          }
          else{
  
              return "";
          }
      }
  

  For the touch screen, I used the code to enter the date below value:

      protected boolean touchEvent(TouchEvent message) {
          flag=true;
          return super.touchEvent(message);
      }
  

  In Touch no I used the code instead of the above code below:

    public boolean keyDown(int keycode, int time)
      {
          if (Keypad.KEY_ENTER == Keypad.key(keycode))
          {
              flag = true;
              return true;
          }
          return super.keyDown(keycode, time);
      }
  

  But it still doesn't work. I use 8900 Simulator for Non touch and 9530 for touch. And I'm on BB OS 5.0.0.

  Please help me...

  Hi simon,.

  After a long period of time. I solve this problem. In fact, I used this indicator due to the means of display mode when its value is false, then the date is not displayed.

  I solved it by using the NavigationClick() method.

  Thanks for your time.

• Date format for the field date

  Hello

  I'm stuck with formatting issues after that try to various forums, but none of them worked so far...

  Now, the question is I have two fields on the form date both are of date data type and I checked the type of attribute VO also data...

  Among the parameters fields like messagestyledtext are messageinputtext...

  It's weird when I checked the dates with system.out.println, it displays in the format as follows:

  Value LevelIIAppeal before 2015-08-20

  LevelIIAppeal value before August 20, 2015

  I tried below is the code in LICs both methods but none of them: alert

  java.sql.Date date1;

  SimpleDateFormat sformat = new SimpleDateFormat("dd-MMM-yyyy");        

  If (UVO.getCurrentRow () .getAttribute ("LevelIiAppealDeadline")! = null) {}

  String LevelIIAppeal = (String) UVO.getCurrentRow ().getAttribute("LevelIiAppealDeadline").toString ();

  String str_newDate = sformat.format (LevelIIAppeal);

  System.out.println ("value entered LevelIIAppeal" + str_newDate);

  2nd method

  Try

  {

  Date1 = new java.sql.Date (sformat.parse (LevelIIAppeal) .getTime ());

  }

  catch (System.Exception e)

  {

  Date1 = null;

  }

  System.out.println ("value entered LevelIIAppeal" + str_newDate);

  Help, please.

  Thank you.

  MK

  MK,

  As I've said several times, the format of an object of type 'Date' have no significance. You can just skip the date object to the PL/SQL (format are not important, if passing as Date).

  You can refer to the blog below if you want to see how to move Date of page to PL/SQL. : Oracle tips of Johny: OAF: sample code to call the PL/SQL of OA Framework procedure

  Also to check format specifc #2 and #3 format (not not mandatory in this case, I guess): Oracle advice of Johny: OFA/ADF/Java: playing with Dates in Oracle Application Framework

  Close the message if you got this job.

  See you soon

  AJ

• Filling of updated by and the last Date of update in Wizard generated shape tab

  Version 4.2.6.00.03

  Hello

  I have a wizard generated shape tab and I have to fill two columns last updated by and last Date of update.

  I have a horrible time to do something which should be easy enough.

  I created a page process:

  BEGIN

  BECAUSE me in 1... APEX_APPLICATION.g_f01. COUNTY

  LOOP

  UPDATE high_level_estimate

  SET last_updated_date = SYSDATE

  , last_updated_by =: APP_USER

  WHERE high_level_estimate_id = APEX_APPLICATION.g_f03 (i);

  END LOOP;

  END;

  But the columns are not updated.

  The primary key column and the primary key column appears in do not appear that's why I think the columns are not updated.

  So when a new row is added or an existing row is updated when the user clicks on the button submit these two columns need to be updated.

  Can someone help me get this to work?

  Can what information I provide?

  Thank you

  Joe

  Jen,

  Wow! Thanks for checking back!

  I had finally it works. Sorry I didn't update the post.

  I used the trigger approach, although I do not like but it is.

  What I did try to find out which of these two areas were the origin of the problem. So said the two fields in the query and ran the page and update the page and there is no error of course since I commented on the columns.

  Then I've uncommented a column, repeated updates, and worked, and this column has been updated.

  I uncommented the other column, repeated that updates and work again and again update the two columns.

  I have NO IDEA why. Somehow something has been corrupted, and comment and uncomment the columns set.

  I have no change to relax during this process. The relaxation I posted earlier is the same code.

  Thank you very much for your help Jen!

  Thank you

  Joe

• How can I select the first date (at least) and the corresponding date of two different tables source?

  I have 2 tables, INVOICE and INVOICE_REFNUM similar to below. I'm writing a query that withdrawing the first date (less) for a single record remaining the two tables. Each table records the receipt of invoices, but according to the source of the received invoice some may reside in INVOICE_REFNUM and others the INVOICE table. I also use DECODE on the topic of INVOICE_SOURCE, when the date less is taken from the INVOICE table that contains that field, so if the date is in the field INVOICE_REFNUM DECODE is not necessary. Example:

  INVOICE (table)

  INVOICE_GID INVOICE_SOURCE INSERT_DATE

  ABC. AVRT123 I HAVE 11/03/2012-15:49:32

  ABC. CNWY234 G 12/03/2012 14:07:30

  ABC. UPGF678 M 15/03/2012 20:21:54

  INVOICE_REFNUM (table)

  INVOICE_GID INVOICE_REFNUM_QUAL INVOICE_REFNUM_VALUE INSERT_DATE

  ABC. AVRT123 SOURCE ACS 11/03/2012 14:49:32

  ABC. CNWY234 SOURCE CSA 12/03/2012 13:07:30

  ABC. UPGF678 SOURCE ACS 15/03/2012 21:21:54

  My decode statement is: DECODE ("INVOICE_SOURCE, 'I', 'IDE', 'G', ' Auto-Pay", ', 'Manual')

  If I were to write a query on these two tables, the output will resemble the following:

  INVOICE_GID INVOICE_SOURCE INSERT_DATE

  ABC. AVRT123 ACS 11/03/2012 14:49:32

  ABC. CNWY234 ACS 12/03/2012 13:07:30

  ABC. UPGF678 Manual 15/03/2012 20:21:54

  I worked on it for 2 days, and I was able to pull a date by using the following SQL code, but cannot determine how to extract the corresponding source:

  SELECT THE LEAST (GLOGOWNER. INVOICE_REFNUM. INSERT_DATE, GLOGOWNER. THE INVOICE. INSERT_DATE) AS 'DATE OF THE INVOICE.

  GLOGOWNER. THE INVOICE. INVOICE_GID,

  DECODE (GLOGOWNER. THE INVOICE. INVOICE_SOURCE, 'I', 'IDE', 'G', 'Auto-Pay', ', 'Manual').

  GLOGOWNER. INVOICE_REFNUM. INVOICE_REFNUM_VALUE

  OF GLOGOWNER. INVOICE

  LEFT JOIN GLOGOWNER. INVOICE_REFNUM

  ON GLOGOWNER. THE INVOICE. INVOICE_GID = GLOGOWNER. INVOICE_REFNUM. INVOICE_GID

  WHERE GLOGOWNER. INVOICE_REFNUM. INVOICE_REFNUM_VALUE = "ACS."

  AND GLOGOWNER. INVOICE_REFNUM. INVOICE_REFNUM_QUAL_GID = 'SOURCE '.

  AND GLOGOWNER. THE INVOICE. INVOICE_TYPE = 'I '.

  ORDER OF GLOGOWNER. THE INVOICE. INVOICE_GID

  Any help is greatly appreciated!

  Best regards

  -Adam

  Hello

  Is that what you want?

  SELECT i.invoice_gid

  CASE

  WHEN ir.insert_date<= i.insert_date ="" then ="">

  WHEN i.invoice_souce = 'I' and THEN 'EDI '.

  WHEN i.invoice_souce = 'G' THEN 'debit '.

  WHEN i.invoice_souce = am' THEN 'manual '.

  END AS invoice_source

  , The LEAST (i.insert_date, ir.insert_date) AS insert_date

  I have the Bill OF

  JOIN invoice_refnum ON i.invoice_gid = ir.invoice_gid ir

  WHERE ir.invoice_refnum_value = 'ACS '.

  AND ir.invoice_refnum_qual_gid = 'SOURCE '.

  AND i.invoice_type = 'I '.

  ORDER BY i.invoice_gid

  ;

  There is no reason to do an outer join if you only want the lines with specific values anyway.

  What happens if the 2 tables have exactly the same invoice_date?  The query above takes the invoice_source of invoice_refnum in this case, but that can easily be changed.

  Or the other of the insert_dates can be NULL?

  I hope that answers your question.

  Otherwise, thank you post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also after the results you want from these data (otherwise what you have already posted).

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002#9362002

• How to change the font color or the background color of the field date. MinValue based on its value

  Hello world

  jdev Studio Edition Version 11.1.2.3.0.

  I have a date field of the entry in the table of the adf. I want to change its color (font or background) if the date is less than the current date.

  I use jdev Studio Edition Version 11.1.2.3.0.

  Thank you

  You must have a date property in a bean that allows you to get the current date. That you can use in a for EL compare to the date in the table and set the inlinestyle as accordingly

  #{lt mybean.currentdate row.datetocheck?-color: Red ":" "}

  mybean. CurrentDate is the method that returns the current date of the bean method.

  Timo

• Question of validation for the field date/calendar

  I want to use the regular Date field, but not sure what is the best way to validate user input.

  The display Format that I use is "DD MMM YYYY",

  If the user is using the calendar to select the date, no problem.

  However, the user can also type things in this area without using the built-in calendar,

  What should I do when the user types "MM/DD/YYYY" (eg. "19/09/2011")?

  How to validate that?

  If I put a validation schema "DD MMM YYY" in the validation tab, it doesn't seem to work.

  so, please help.

  Add the same schema in the Validation model/edit section and make sure that you include a model of Validation Message text in the dialog box informing the user that forms await you. If they enter the wrong format your message text appears then make it informative.

  Paul

• "UDP receiver.vi" does not work on the type of "public" network but on a private type and the field. Why so much?

  I have a configuration Ethernet with 'UDP sender.vi' and "UDP receiver.vi" basically back in as the eponymous example shipped in LabVIEW examples i.e. pair. Nothing special and quite basic.

  The UDP sender regularly sends out UDP (30 bytes) packets to the receiver using the number of receivers IP and port 80. However, the port number is not interest to the problem.

  The sender and the receiver are different machines, but the two LabVIEW 2011sp1/32, Win7/64
  If it is running on a domain network, it works very well. If it runs on a 'public' (Windows Firewall terminology) using the network - IP number data comes through in the Receiver.vi 'UDP '!

  I checked what is obvious:

  1. The packets arrive actually in the network interface (checked with Wireshark) UDP receiver computers. For example. Connection via the sender's public network and firewall it meets on his way there.
  2. firewall on the receiver PC is open for incoming traffic on port 80 for the public (and private + domain name) and open for all programs and allowing the crossing side (there is a router with NAT translation upstream). We even tried to disable the firewall completely - no change.
  3. A program with a similar function as ' UDP Receiver.vi ' but written in C++ running in the same exact state, works as expected.
  4. same "UDP Receiver.vi" running on a target RT (sbRIO9606 or cRIO9024) and off the coast of the exact same cables copper - works as expected.
  5. It is tested on several PCs with the same results.

     For example. everything is, as far as I can see, according to the 'books', and again, I must have missed at least one book. The data arrives in the PC network stack - otherwise the program c ++ would work either. So what is done differently in LabVIEW?

  Any suggestions as to why a C++ program or a RIO can read the 'public' port UDP, but such a LabVIEW program cannot? And especially what can be done to solve it.

  Thank you
  Henning

  There are many other services that is blocked by nature in Windows when you use a network connection of type 'Public '.  Have you added an exclusion for LabVIEW so LabVIEW is not blocked when using a network of type "Public"?

• The vulnerability is the CC and the fields of e-mail when sending group messages?

  I have a friend who is a challenge to me when I advised her to use the BCC field instead of the CC field to send group messages.
  I've been in there for years and this was one of the fundamental pieces of advice that we would give users on our network to prevent the spread of the virus and spam and to be perfectly honest, I thought it was a given since e-mail is sent in plaintext and therefore can be analyzed.  The question I have, are vulnerable to what Email address when it is used in the CC field or virus and malware seeks to steal addresses?  Also to throw away spammers as well.

  Thank you, sugi2k.

  Hi sugi2k,

  With assistance from the ICC is also how to send group messages, but I do it mainly for individual members of the group do not get to see all addresses of electronic mail to any person to whom I sent the message.  As far as I know, there is no almost difference between using the field or the CC field to send emails (although IAB a little better to hide the address, but it can still be found if you are the recipient or the sender of this JIU).  In general, this isn't how the malware and hackers work.  That's all simply too cumbersome and time-consuming to do by checking the addresses in the individual emails (if it is possible and very difficult to defend against if they can intercept the mail-, but generally found from the account of the recipient and not the sending account and generally because that most people choose to automatically add new senders of e-mail to their list of contacts and this is where the vulnerability usually occurs).

  Here is an article on the differences between the BCC and CC: http://email.about.com/od/emailnetiquette/a/cc_and_bcc.htm.  You will notice that it addresses of anonymity than the main on safety (but there are benefits of security regarding anonymity and the inabiility of other recipients to view the BCC recipients).

  Most malware and piracy occurs because someone comes to your contact list or address book or see everything simply your email address somewhere (maybe of you sent to someone who has been infected or a real pirate) and uses different techniques to make it look like SPAM and other things they send is from you when you're not actually send anything.  If they arrived at your list of book or contact addresses or someone that you are listed as a contact (probably using another method - I don't think these fields themselves are more susceptible to malware or hacking than anything else on your computer - if they have installed the keystroker malicious software or programs (everything that you type can be made available to them, unless detect you and remove malware or hacking tool), they can send to each of them (probably with an attempt to infect their systems included as well).

  In short, while they are not invulnerable, they are as safe as anything else (although IAB will limit the number of people who see the addresses of any group that can help their share where you don't know if they have been compromised) on your system.  The real problem with the e-mails is not sending them, but to receive for having "a surprise" with her that compromise your system and allows a person access to your contacts or address book - but they will not often also for entries in the messages sent and if they do, then the entries to one of these fields on your computer If it has been compromised is possible (not only e-mails but documents and about anything).

  If you are concerned that these things, use a program to encrypt messages and require recipients to have a decryption code to open.  It can still be broken by a pirate, but is much more difficult and requires a much more sophisticated hacker.

  I hope this helps.

  Good luck!