Qosmio F10 and TV connection via SCART?

Similar Questions

• Try to synchronize a mobile laptop and it connects via bluetooth, but will not be synchronized

  try to synchronize a mobile laptop and it connects via bluetooth but will not synchronize what I am doing wrong

   
  Moved from feedback
  Original title: device

  "You run a form any of sync on the PC software, usually supplied with the ' phone or available for download on the ' phone manufacturers site.

  As you do not tell us that "phone and helps OS it runs there is little more we can give."

• I recently installed Windows 7 and you connect via RDP.

  * Original title: activation of Aero?

  Hi, I recently installed Windows 7 and you connect via RDP. When I plugged in, I was greeted with Standard Windows, I went in tge customization panel but when I click on an aero theme, said that some parts of the theme have been disabled because I was using remote desktop. Is there a way I can enable Aero via Remote Desktop?

  Aero feature is disabled in all versions except versions ultimate and Enterprise

  Aero glass remoting

  https://en.Wikipedia.org/wiki/Windows_7_editions#Comparison_chart

• QOSMIO F10 and play games such as the XIII or the battlefield

  I have a QOSMIO F10 with XP Home Edition operating system
  I live in Iran. I installed a professional XP on my laptop too and most of the games that he is in Iran are cracked. I have problems with games. Some games load without problem these FIFA 2005, but some of them will not load.
  Once I installed XIII in standard mode and it will not load again I installed even play clean
  then it loads only once, and now even once it does not load.
  I don't know what I'm doing?
  Please guide me.
  TX
  Amir

  Hey Amir,

  As you know, more recent games manufacturers use very sophisticated on their CD/DVD copy protection techniques and it is not always possible to circumvent these routines successfully.

  The effect of this is that the CD will not always load or run correctly. Some will complete the loading process, but will not then allow the game to run. Sometimes, the game will work but in reduced mode with no options available active game.

  Unfortunately I don't know any way to avoid this happening other than to try to get the real game CD if possible.

  Good luck with your game of :>)

• Qosmio F10 and dual channel

  Hello

  I have a Qosmio F10 with 512 MB, and I want to upgrade to 1024. I don't know if my qosmio supports Dual Channel. Can I add a sodimm pc2700 512 MB module and two-channel will work or I need exactly the same model of my laptop.

  TNX!
  Rood

  Hello

  Qosmio F10 uses DDR RAM modules. This modules support dual channel.
  As far as I know that you can upgrade the memory of max 2048MB and these modules are supported:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

• HP wireless printer (3545) showing only printer and scanner, connected via Wireless

  When I connect via USB, I see Print/Scan option in the settings system-> Printers & Scanners

  But when I connect through wireless, I only Print

  What is the problem?

  Even in the HP utilities, I don't see this option "Scan to Computer" when it is connected to the wireless printer

  Hi TahseenJamal,

  Thanks for the video, which has been most useful.

  I suspect that the router can be not broadcast the Hello Protocol as it did in the past. To resolve this problem, please follow the instructions below.

  1. Out of the router, unplug the power cable
  2. Out of the printer, unplug the power cable
  3. Stop the Mac
  4. Give up everything for 1 minute and then reconnect the router
  5. Once sighted routers are on, reconnect the printer to the
  6. When the wireless printer is solid, turn on the Mac
  7. Now try to add the printer that you had previously, you should now see the Hello or Hello printer multifunction beside him.

  If this does not resolve the problem, it could be the printer. Follow the steps below.

  On the front panel of the printer, the arrow down to settings, then press OK. Down arrow for wireless and press OK. In the wireless menu, go to IPV6 and turn it off. Once IPV6 is disabled, try to add the printer in the preferences system again.

  Please let me know if either of these solutions solve the problem and if one of them, please also let me know, thanks.

• I have a laptop Windows XP and win7, connected via a wireless router.

  I have a portable desktop and win7 winXP connected via a wireless router.  Can see the XP machine with the file full access Win 7 but not vice versa.  On XP, clicking on C: of the laptop gives error "C: is not accessible. You have no permissions... "How can I fix it?  As far as I can tell all together relevant upward is correct on Win7.  No password have been set.

  Hello

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• Qosmio E10 and TV-out via D-video COMPONENT

  Hey all,.
  I would like to have some explanations about the D-video on the port of the Qosmio (especially for the E10 but I guess it applies on other Qosmio models as well)
  From what I have gathered, this port (D-video) is similar to the output of the GameCube component. It is commonly used in the Japan to connect video equipment upscale to HD TV.

  So here's my question: how is the European model of the Qosmios are budled with a "D-video cable SCART?
  Since Scart induces only RGB and port D-video outputs (not composite) COMPONENT, I don't understand how that would work AT ALL.

  In addition, in the USA, Canada and Japan, Qosmio models are provided with this D-video to RCA component cable
  (http://209.167.114.38/support//TECHSUPPORT/Tsbs/all/-TSB001078-79/Qosmio%20Accessory/Qosmio%20Component%20Video%20Adaptor%20Cable.gif). This isn't your standard RCA output (3 caps NOT give ' composite + sound "but only video signals"Y, Cr & Cb")

  (so basically the answer by Feliks on this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2064&tstart=90 does not apply to all)

  Please help me understand because it's a big mystery to me ;)
  Thanks for any input on this.
  Later,.

  Alcahest

  Hello

  Unfortunately, Europe is still a step behind the United States and the Japan. As far as I know at the moment there is no possibility to connect the portable computers directly to the HDTV. I didn't tried yet (must buy HD TV ;)) but on the net I found some interesting pages that recommend to use the PC to video converters HDTV.)

  This theme is very interesting and I will be very grateful if you write again and share with us some useful information.

  Good luck!

• Qosmio F10 - how to connect VCR to the Qosmio

  I'm trying to connect my analog VCR / my laptop to save some old tapes.

  Follow the instructions exactly as detailed in the user guide, but I can't get a picture. Used both Svideo composite without joy!

  Someone had the same problem and anyone know a fix?

  Thank you in advance.

  CT

  Hi Anthony,.

  I spent a futile a few hours by train to do it with my Satellite A30 until I have realized that the adapter SCART I was using was a single input device, so I wasn't getting any signal from the VCR to my laptop. I changed the adapter SCART to a version switchable and made sure that it passed to the "output" mode and it worked very well.

  I never managed to get a picture of S-video in color, black and white only. I gave up in the end and returned to composite connections that worked perfectly.

  HTH

• Qosmio F10 and receiver TV - or not in my case

  I have set up my Qosmio to receive the satellite through the cable SCART (and Yes, I changed the BIOS as described). It changes beautifully satellite channels on the TV, but does not display the image on the laptop. Have tried every combination I can think overall upward but he always said not to find a signal. All I get is a black screen, both in the editing of the scene and 'live TV '. I checked my satellite and quality signal strength and they are both good.
  Any ideas gratefully received.

  Hello tracie

  As far as I know your unit a video port and video output. Have you already checked in s operating manuals which ports are video - in ports? I'm not sure but cable SCART is no plug-in software component video port. If you want to use the TV tuner, you can use S-Video port, Composite or coaxial in antenna.

• Qosmio F10 and external LCD

  I want to be able to get out my screen VGA Samsung 323 t its best resolution is 1280 x 768 is possible to get this resolution out of the F10? The nearest running 1024 x 768 (1280 x 720), but is noticibly infirior to my 1280 x 768 required.
  Any ideas?

  Hello

  I don t think that this resolution is possible on the F10.
  In addition the drivers for this device you will only find on the cd or on you site Web from Toshiba.

  Concerning

• Qosmio F10 and WinDVD Creator: capture unrecognized devices

  A similar problem in a previous post, but the proposed solution does not work. I am trying to record from VCR using the creator, but it lists no capture device, despite video and audio going OK on composite in. I have to do to get to recognize the entries?

  [Edited by: admin on 12 February 06 18:49]

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=9908

  very interesting discussion on the record a video on a DVD.

  Good bye

• How to connect the external Qosmio TV and VCR

  I'm nowhere with this are there instructions written on this.

  Best regards Walter Bisset

  [email protected]

  [Edited by: admin]

  Hello Walter

  I put t know what Qosmio model you have but as far as I know everything is described in s operating manuals. One of my friends has a Qosmio F10 and I checked manuals s use of his unit and in the page 154 (9-13), there is description how you can connect to external TV using S-video output port.

  Good luck!

• Qosmio F10-101: after change of graphics output d-video card does not work

  Hello
  I had a problem with my qosmio F10 and after service, changed the graphics card from Nvidia Geforce 5700 6600. But when I tried to switch the LCD for the TV screen, I could not use my d-video out (SCART nb exit). I could not change display properties TV format because these settings the value NTSC and shadow. You have an idea? How can I solve this problem before the service...
  Thank you

  Hello

  The G10 has installed the utility of development of Toshiba and this tool has controlled the TV out put and the PAL, NTSC settings.
  Check if it is available on your Qosmio F10 and change the settings if necessary.

  Furthermore, it would not be a bad idea to access the BIOS and check if there are any options that can move from a PAL, NTSC

• Grafic card GForce 5700 disordered for Qosmio F10

  Adapter GForce 5700 128 MB out of order twice.
  Did he now someone why he happen to model Toshiba Qosmio F10
  How to connect to the service provider in Ukrain

  Hello

  It is always possible that some parts are not available at this time. It s nothing unusual.
  In my opinion, if the service provider has no parts in stock in Ukraine parts must be ordered form the Toshiba district or elsewhere.

  I remember that someone in this forum suggested that a graphics card was unserviceable and the laptop has been upgraded with a different graphic card better.
  You can contact the ASP in your country. The contact information you will find on the page of Toshiba:
  http://EU.computers.Toshiba-Europe.com/--> Support and downloads--> support page--> find an authorized Service Center