Qosmio F10 - 136 and D-video output

Similar Questions

• Controller drivers/video display Qosmio F10-136

  I'm in the middle of reinstalling everything on my computer laptop Qosmio F10-136. I used the Toshiba site display drivers. However, in the video controller Device Manager shows an error, and the drivers are not installed. The graphics card is a nVidia GeForce FX go5700. Scrolling up and down pages in Internet Explorer is very slow.

  Also when I go to display settings-advanced-adapter graphics card properties is not displayed under adapter type.

  Someone knows what's the problem? I need to download the drivers to elsewhere?

  Thank you

  Ben

  Hello

  The graphics driver on the European driver Toshiba page works and can be installed correctly.
  I think you did something wrong.

  Try to reinstall the graphics driver again.

  Remove the graphics controller from the list of Device Manager and restart the laptop.
  Then try to reinstall the driver again. I recommend to install in the Device Manager.
  Choose graphics card, update driver, and then point to the downloaded graphics driver and complete the installation.

  See you soon

• Qosmio F10-136 - cannot install all drivers

  I have a Qosmio F10-136.

  I recently formatted hard drive. Because I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available on the Toshiba site, but I did not install all the drivers except the wireless LAN. Most of the configurations of driver refuse to run at all, some seem to install the files, but the driver is not detected.

  Please notify.

  Hello

  Do you have what OS installed on your Qosmio laptop?
  AFAIK the F10-136 is a European model and so you can download all drivers here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you use Windows XP, you can find the installation instructions document. Use this list as a recommended driver installation order.
  Usually the drivers must be installed first, and then Tools. You should start with the chipset drivers.

  Good bye

• Qosmio F10-136 VGA does not work with the INVENTOR

  Hi, I bought a qosmio f10-136, I use CAD/CAM software and when I started working on the INVENTOR he used to close, when I contacted AUTODESK they told me that my VGA is not certified for use with INVENTOR 10.0, I tried to update my VGA driver toshiba but Web site it still was usless, is there a solution for this problem?

  [Edited by: admin November 13 05 10:25]

  Have you tried to run the program compatibility Wizard?

• Qosmio F10-136: straps on screen

  Hello
  Qosmio F10-136, I bought three months ago. Yesterday I get problem, only when starting (where is the qosmio logo is appear) of the computer and start the windows I have vertical straps on the screen. I can't install the graphics driver, because the office is not appear and the computer restarts by itself, and they're trying to go on the security mode, so that the computer should work without graphics driver...
  Maybe someone had a problem. Please advice.

  Hello

  As far as I know it of possible remove and install dryers in safe mode. In my opinion, you must start the machine in SafeMode (F8) and then reinstall the latest graphics driver. I found two graphics drivers for this device. One for the other for Win XP and Win MCE.
  Please visit the Web from Toshiba.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Good luck

  Best regards

• Satellite 5105 and 5205 video output bad piece (US)

  The video output is good on the 5105.

  The image on the LCD will not give a complete picture. Thirdly, the bottom is either hidden or replica the upper third of the image. Most likely, I see a drooping white or gray. This occurred when starting, too.

  I replaced the LCD screen with another of a deceased 5205. This time, only the first third shows an image. The lower 2/3 seem to be blackened.
  In addition, the Toshiba Spalsh screen logo does not appear at startup (maybe it's because it's in the field of electricity failure).
  I have not checked the State of the screen LCD 5205. I also forgot to connect this laptop to external video, when I used the
  5205 LCD.

  I just want to confirm the video cable needs replacing.

  I would like to know how completely detach from the Palm of the lower chassis. I read the instructions provided by the sticky thread. I'm stuck at the point where he seconded the palmrest except for the area around the speakers ' top'. Better yet, should what cables I detach before completely disassemble the palmrest?

  Once this is done, I intend to replace the video cable, but I also see what looks like a metal shield in the middle of the laptop. Any thoughts on treatment that, too?

  Blurred image of 5105: http://img526.imageshack.us/i/toshiba510501.jpg/
  Then the lower part is gradually degraded: http://img29.imageshack.us/i/toshiba510502.jpg/
  and: http://img196.imageshack.us/i/toshiba510504.jpg/
  and go: http://img262.imageshack.us/i/toshiba510503.jpg/

  Then I rebooted the 5105: http://img196.imageshack.us/i/toshiba510505.jpg/

  The 5205 is even more colorful!

  http://img12.imageshack.us/i/toshiba520501.jpg/
  http://img150.imageshack.us/i/toshiba520502.jpg/
  http://img262.imageshack.us/i/toshiba520503.jpg/
  http://img526.imageshack.us/i/toshiba520504.jpg/

  I'm afraid I forgot to test the video output on the 5205.

  I also posted this on Notebook Review.

  Thanks for reading!

  Hello

  I; m afraid; It looks a bit like a graphics card problem...
  If replacing the screen did not help the GPU could be affected.
  In this case, the motherboard should be replaced. It would be the worst case, because a motherboard is the most expensive part for laptop.

  In addition, you will not find any what manual disassembly here on the Toshiba page.
  These manuals are not for use public and created only for the technicians of the ASP.

  But the world wide web contains lot of information and I would recommend to google for some details.

• Qosmio X 500 and an HDMI output does not automatically

  Sorry for my English...

  Hello.

  I have a Qosmio x 500 recently that runs on Windows 8.1

  Previously, when I plugged the PC to TV hdmi cable, I had (Samsung TV), a beep on the PC, binding and done automatically? the TV is on (if it was in standby).

  I could even control the PC with the TV remote control, put a film, break, etc... Super convenient!

  Source indicated on the TV Anynet + pc Toshiba.
  And when I switched with the TV remote control at the TV, the screen of the PC is turned on.
  *
  Off, despite attempts repeated at least 5 software (drivers)? Different certified Toshiba HDMI, I didn't do it and I have to manually switch to see the PC on the TV (choose the HDMI source on the TV).

  HDMICtrlMan is a folder where, after installation, there are:
  ChangeOutput.exe
  HCMSoundChanger.exe
  HDMICtrlCfg.exe
  HDMICtrlMan.exe

  But nothing works!

  I've also updated the audio and video driver: gforce gts 360 m
  But now I want!

  And I don't know the progression of the computer when you connect an HDMI cable (depending on the graphics chip?).

  If someone has an idea or experience of this problem, thanks in advance

  You have installed Windows 8.1 on Qosmio X 500 but the Win 8.1 is not possible on this model of laptop and so there is no drivers Win 8.1 available.

  The page of the Toshiba UE driver provides control manager HDMI and remote Manager for Win 7.
  HDMI Control Manager is required for the HDMI controller and TOSHIBA Remote Control Manager improves the support for a remote control on your Qosmio X 500.

  I guess that you are not able to use all the features of laptop HDMI due to lack of software for Win 8.1.

  Maybe you can try the software and drivers Win 8.1 released for other series of Qosmio as Qosmio 875

• Qosmio F10-136 - power management

  I was starting my Qosmio and while he started and almost ready to work, a poped message saying

  Power management error
  A fatal error has occurred. The program will end. Code: 0x51A

  I tried a few more times to start always get the same message.
  I uninstalled and reinstalled the software from the CD of utilities & tools give me the same message every time.
  I have also reinstalled the 'Modules' by following the instructions on the CD front of re-installation of 'power management.

  Any help will be appreciated. Thank you

  Hello

  Well, it's not easy to say why this error occurs.
  AFAIK, you must the common Modules before you install power management.
  Did you install other programs? On the Toshiba site I found two Power Saver downloads. One for Win MCE and another for Win Xp. I propose to download the right version to reinstall this utility.

  Good bye

• CPU speed wrong Qosmio F10-136

  Hello
  My processor is running at 598 MHz not 1.7 GHz as it should.

  598 probably the FSB.

  The BIOS update does not work either 1.20 THAT WIN will not work because the motherboard has been replaced and the Geforce 6600 G/card installed.

  Then
  1. How can I get the correct CPU?
  2 update the BIOS to F10 with new motherboards?

  Hope you can help.

  Hello

  The case is clear buddy the motherboard has been changed and the technician forgot to update the firmware. The laptop must be sent again to the ASP because they must write your Bios and your system processor information

  Sorry for this bad news thinks but there is nothing to do without additional assistance from EPA

  Good luck

• Several problems with Qosmio F10-136

  Howdy

  Having trouble with my F10, which began a few days ago...
  -He can't wake up after hibernation (freeze - black screen)
  -freeze in closin XP (gel - "shutting down... "mssg. doesn't matter if im tryin to shut down the system or reboot)
  -100% by 'system' process cpu usage (start-up time has not changed...)

  Updated the bios, I did format and reinstall OS twice already, problems arise again so I guess it's some kind of hardware problem.
  Maybe the power supply?
  Have no idea...

  Any ideas?

  any suggestions appreciated

  Hello

  It is not easy to say with certainty what the problem is here. You may have updated RAM or something?
  I don't think it has something to with the power supply, but if you want to have a clear answer the cell phone must be controlled by technicians.

  You did the right thing with the new installation of the OS, but if the problem persists, it must be something with the hardware. I hope that you have installed the image of recovery for test purposes.

• Qosmio F10 display and sound card drivers do not install

  Hello, my hard drive went, and the replacement, we used the toshiba recovery disc.

  We have installed the Intel chip software, then the driver NVIDIA. It says its installed but makes no difference after you restart the computer. Audio driver begins to install and then says driver not found. We have downloaded the new drivers and get the same results.

  The operating system is XP home. Any notice are apperciated.

  Hi sweet,

  > It says its installed but makes no difference after you restart the computer.
  What difference do? After the driver installation, your computer will start in the same way as before so I know what a difference you expect after installing the driver.

  As Akuma written normally after using the disk recovery, all the drivers and tools are pre-installed. You have yellow exclamation marks in Device Manager?

• Qosmio F10-136: the fan never stops after the games?

  Hi, bought this laptop 2 days ago. Build is average... too crack I would say; the keyboard easily dips when you press; the screen is very good (especially for texts, photos look washed out).

  When you go to a high-end gaming, saying Deus Ex 2, the fan is used full throttle of course... Exit to Windows 10 minutes later, the fan continues will and... forever, blowing cold air.

  During the normal work of Windows, the fan is used from time to time, but fortunately shuts down after 45 seconds... I timed it.

  Go ahead and resume immediately or even if a "power different setting", it stops immediately. Someone forget of course somewhere in the driver to turn it off.

  I also see that there are two vents. The one at the back doesn't seem to be anything blowing. Or is it a contribution?

  Hello

  As far as I know the general cooling vents are placed on the left side.
  Did you see if the fan runs at the bottom of the unit? In my view, there are the cooling holes. The air flow more coolant on the left side.
  For more, if you play games on this device all devices run with high performance.
  (map chart, CPU, strip memory, etc.). All parts of this produce a lot of heat. In this case, the cooling fans run also the best performance. In my opinion it is not a position or fault cooling.

  To protect against overheating, the CPU has an internal temperature sensor. If the temperature of computer s reaches a certain level, the cooling fan is turned on or processing speed is lowered. You can control the temperature of the CPU by turning the fan first, then if necessary, reduce the speed of the CPU. Or, by lowering the speed of the CPU first, then if necessary by turning on the fan.

  Good bye

• Qosmio F10-136 - no sound after installing WXP Pro

  I reformatted my hard drive using the recovery CD, after which, I installed Windows XP Pro. Originally, it was Windows Home Edition that was previously installed. Now, the sound is missing and some components more.

  I tried to download the audio drivers from the Web from Toshiba support site but it didn t work. When executing the installation of the software Sound Max of Analog Devices, Inc., a guest of error is displayed "driver not found, please reboot your computer and reinstall again". Can someone help me on this?
  Thank you.

  First of all buddy you need to update the XP to the last State. I mean to install the XP2 and all patches and fixes available!

  Then you must download all the available drivers, tools and utilities for XP and should install it in the right order.

  The right installation order is mentioned in the installation instructions txt file.

  XP audio driver Analog Devices Inc. v5.12.0.1.5160 is available on the page and it works for sure!

  Check it!

• F10-136 transmitter cable not included?

  I just bought the Qosmio F10-136, according to the Quickstart F10 (number 5) list, there should be an infrared emitter cable, it is not one inside the box
  does anyone know if there must be one and the laptop works using infrared?

  Hello

  You have posted several messages on this topic. In the first post, you want to know the contents of the box of Qosmio F20 - 136 and now something on F10 - 136.
  What cell phone do you have? F20 or F10?

  Nevertheless, the F10 shipped only with the power cable, cable Modem (if current modem) and the video cable. I put t found information on infrared cable and I have never heard such cable.

  As far as I know the Toshiba remote was delivered with this device. This remote, you can use with the Qosmio player.

  Good bye

• Battlefield II works lumpy on my Qosmio F10

  My question to EA:

  I have a Toshiba Qosmio F10-136 with a Nvidia Geoforce FX Go5700 128 MB graphics card but am knows the lumpy graphics, stall during the game Battlefield 2.

  The drivers are up to date that Toshiba and those embedded in the disc does not support the Go series.

  How can I get the game to run smoothly?

  Help please.
  Thank you

  This is the response from EA:

  Double-click on the C: drive
  Double-click the "Windows" folder
  Double-click the folder "Temp".
  Hold down the 'CTRL' key and press 'A' to select all.
  Press "Delete" on your keyboard and accept invites him "are you sure you want to delete these files.

  Adjust your monitors to default games of 60 hz refresh rate

  Right-click on your desktop and choose Properties.
  Click the settings tab in the display properties window.
  Click the Advanced button.
  Click the monitor tab.
  Change the list box dropdown screen refresh rate to 60 hz.
  Click apply and close all open windows.

  PATCH for BF2 v1.01 now available!
  The patch for v1.01 Battlefield 2 is now available for download. This update replaces v1.01 and fixes the memory of such leak. With this update, we've made available an unclassified update server for a file server not updated for Linux and Win32.
  http://www.eagames.com/official/battlefield/Battlefield2/us/editorial.jsp?src=communityupdate_071505

  If you need further assistance on this subject or any Electronic Arts games in the future, please visit our website and view our extensive Self Help knowledgebase, http://support.ea.com.

  Please send us an email about any significant change or development with your question.
  Thanks for choosing EA Games!
  Victor O
  Electronics Arts Technical Support

  Any news on the new drivers from Toshiba?

  Hello Norsk

  The response from EA is a standard response, and it is well known that the laptop users are to use drivers designed by the manufacturers of portable. As you know the graphics cards used in laptops are not so powerful as the desktop graphics cards. There are various reasons for this, but the most important is overheating.

  You can try to use the driver provided by the manufacturer of the graphics card, but there is no guarantee that it can be installed properly. The only thing I can recommend is to play games using the low graphics settings.

  I have the same situation with my Satellite P20, but using the low graphics settings I am able to play my favorite games.

  Good bye