Qosmio F10-136: the fan never stops after the games?

Similar Questions

• Qosmio F10-136 VGA does not work with the INVENTOR

  Hi, I bought a qosmio f10-136, I use CAD/CAM software and when I started working on the INVENTOR he used to close, when I contacted AUTODESK they told me that my VGA is not certified for use with INVENTOR 10.0, I tried to update my VGA driver toshiba but Web site it still was usless, is there a solution for this problem?

  [Edited by: admin November 13 05 10:25]

  Have you tried to run the program compatibility Wizard?

• Qosmio F10-136 - cannot install all drivers

  I have a Qosmio F10-136.

  I recently formatted hard drive. Because I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available on the Toshiba site, but I did not install all the drivers except the wireless LAN. Most of the configurations of driver refuse to run at all, some seem to install the files, but the driver is not detected.

  Please notify.

  Hello

  Do you have what OS installed on your Qosmio laptop?
  AFAIK the F10-136 is a European model and so you can download all drivers here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you use Windows XP, you can find the installation instructions document. Use this list as a recommended driver installation order.
  Usually the drivers must be installed first, and then Tools. You should start with the chipset drivers.

  Good bye

• Qosmio F10 - 136 and D-video output

  I have a Qosmio F10-136, I want to use the D-video output with cable SCART. I ve tried to change BIOS, VIEW the section, but through the various options it s PAL (SCART) NOT. Only PAL (S-Video), 525 p. 750, 1125i, 525i NTSC (US), NTSC (Japan).
  My BIOS version is 1.20, I've followed the instructions of the FAQ5300XK0012R01 and TSB4A00TK000MR0.

  Hello

  Is your unit pre-installed with original recovery media and if the display driver is original Toshiba designed one?

• Qosmio F10-136: straps on screen

  Hello
  Qosmio F10-136, I bought three months ago. Yesterday I get problem, only when starting (where is the qosmio logo is appear) of the computer and start the windows I have vertical straps on the screen. I can't install the graphics driver, because the office is not appear and the computer restarts by itself, and they're trying to go on the security mode, so that the computer should work without graphics driver...
  Maybe someone had a problem. Please advice.

  Hello

  As far as I know it of possible remove and install dryers in safe mode. In my opinion, you must start the machine in SafeMode (F8) and then reinstall the latest graphics driver. I found two graphics drivers for this device. One for the other for Win XP and Win MCE.
  Please visit the Web from Toshiba.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Good luck

  Best regards

• Controller drivers/video display Qosmio F10-136

  I'm in the middle of reinstalling everything on my computer laptop Qosmio F10-136. I used the Toshiba site display drivers. However, in the video controller Device Manager shows an error, and the drivers are not installed. The graphics card is a nVidia GeForce FX go5700. Scrolling up and down pages in Internet Explorer is very slow.

  Also when I go to display settings-advanced-adapter graphics card properties is not displayed under adapter type.

  Someone knows what's the problem? I need to download the drivers to elsewhere?

  Thank you

  Ben

  Hello

  The graphics driver on the European driver Toshiba page works and can be installed correctly.
  I think you did something wrong.

  Try to reinstall the graphics driver again.

  Remove the graphics controller from the list of Device Manager and restart the laptop.
  Then try to reinstall the driver again. I recommend to install in the Device Manager.
  Choose graphics card, update driver, and then point to the downloaded graphics driver and complete the installation.

  See you soon

• Tecra A7 fan never stops

  Hello!
  I have a Tecra A7-108 and still the fan blows air. He don't never stops, even if the laptop is idle and with the utility of standby power configured for the lowest consumption. Because I had a problem with my laptop, I took to the guarantee and asked to look to see if the fan has problems. They said that it was defective, so they changed it. Even with a new fan, he refuzes to stop blowing air (stops only when I turn off the laptop :)). I think it may be a software or a bios problem, even though I've recently updated the bios to version 2.0. Could someone help me?

  Hello Vlad

  What to say! I know very well that stronger cooling fan is very annoying, especially if the device works under full CPU speed (depending on application). I have a Qosmio G20 and the same situation is in my case. The fact is that cell phones have a lot more power and performance does not compare to older models.

  This cooling fan noise is unfortunately present on most laptops that you can find on the market. What's important is what is the priority for the notebook manufacturers. I think that Toshiba's strategy is to protect the material. I've read many reports and tests with the different laptop models. Believe me, in the end it is better to buy some manufacturers known as Toshiba's cell phone.

  My Qosmio is also noisier than my old Satellite P20 but cooling fan don t race at full speed all the time. How is it with your Tecra? Is - this permanent cooling fan amusements at full speed?

• Satellite A500 - fans never stops

  Hello

  I did some experiments with methods of cooling of vista...

  First of all, when I start my satellite A500, something like three minutes before the fan to start very quickly.
  When I opened the Toshiba PC Health monitor, temperatures never exceed 40 ° C, but the fan runs at 70%
  Then temperatures decline to something like 35 ° C, but the fan never cease!

  It's exactly the same with the two methods of cooling of the vista power management or the difference is really subtle.

  But a strange thing is when I change the method's cooling performance to economy of execution while the fan is running, then it stops! And it starts again only when the CPU start to become warmer. But again, it remains always under 40 ° C. I think that's not so hot... and the fan noise is annoying when I want to have quiet little.

  So in my opinion, there is a problem.
  If I could change the settings in the economy mode, I would reduce the speed of the fan and I would like to raise the temperature when the fan should start. And when the temperature decreases the fan should stop or slow down to become quieter...

  Thank you for your attention and sorry for my bad English ^^

  Hello

  You said that the fans run at 70%
  This would mean that the cooling modules run with maximum performance, if the temperature remains at the lower level. and that means that the cooling system control module working properly.

  Also you talk about the temperature of the CPU. But there are additional devices such as GPU and HDD that creates the heat dissipation.
  This means that the internal temperature would be different from the temperature of the CPU... possiby is higher...
  That could be one of the reasons why the cooling modules don't stop and run with lower performance.

  However, you should check if your BIOS is up to date.
  If the most recent version was released then it s recommended to update the BIOS.

  See you soon

• HP Envy 15 i7 window 8/8.1 - FAN never stop

  Hello

  I use this new PC, everything is ok, but the fan NEVER cease.

  I mean, as when the PC is idle, no activity, in a cold environment, the screen is off.

  I think (as in my previous laptop) that the fan would be responsible if the temperature is not too hot while here it sems that he simply never stops.

  The noise is quite always the same (it isn't one more question in addition to noise or speed), but I would like to know if there are a few settings (which I have not yet found) for a peaceful solution.

  Thank you very much

  Hello manageri,.
  
  
  
  The processor fan is designed to run continuously. Even in a cooler environment, the processor can reach alarming temperatures. A processor may have a longer duration if there's a lower temperature.
  
  
  
  If you find the fan turns entertaining, you will have solutions to reduce the speed in which it runs. "Reduce the fan noise'and'why computers generate heat, for your information."

  Kind regards.

• Qosmio F10: update the display driver

  Hi all
  I use a Qosmio F10.
  Preinstalled system shows that Windows uses a generic monitor ("default") and the NVIDIA GeForce FX Go5700 6.6.1.2 version.
  I don't know how to update the monitor driver to one Qosmio use really (and not a generic driver).
  I tried to upgrade to the latest version of the display driver by using the file update on the site of Toshiba UK, but run in a system error, the Setup program could not find the file to uninstall the original driver.
  Any idea?

  Hi Christophe,

  I don't understand what you want to do. You have already installed the new display driver (ver.6.14.10.6612).

  Furthermore the display driver depends on the graphics card not on the monitor.

  Good bye

• Qosmio F10: Sometimes the screen is off

  Hi all

  I have a Qosmio F10

  My problem is that sometimes the LCD is off that keep 3-4 seconds. In the course of the situation, computer works normally, only LCD is not a job. What do you think?

  Hello

  He s strange. This display problem occurs when using in particular or if you work with different software?
  I n t have a proper answer. Have you tried updating the Bios or display driver?
  Well, try this, maybe it will help you.

  Good bye

• Qosmio F10-136 - no sound after installing WXP Pro

  I reformatted my hard drive using the recovery CD, after which, I installed Windows XP Pro. Originally, it was Windows Home Edition that was previously installed. Now, the sound is missing and some components more.

  I tried to download the audio drivers from the Web from Toshiba support site but it didn t work. When executing the installation of the software Sound Max of Analog Devices, Inc., a guest of error is displayed "driver not found, please reboot your computer and reinstall again". Can someone help me on this?
  Thank you.

  First of all buddy you need to update the XP to the last State. I mean to install the XP2 and all patches and fixes available!

  Then you must download all the available drivers, tools and utilities for XP and should install it in the right order.

  The right installation order is mentioned in the installation instructions txt file.

  XP audio driver Analog Devices Inc. v5.12.0.1.5160 is available on the page and it works for sure!

  Check it!

• Several problems with Qosmio F10-136

  Howdy

  Having trouble with my F10, which began a few days ago...
  -He can't wake up after hibernation (freeze - black screen)
  -freeze in closin XP (gel - "shutting down... "mssg. doesn't matter if im tryin to shut down the system or reboot)
  -100% by 'system' process cpu usage (start-up time has not changed...)

  Updated the bios, I did format and reinstall OS twice already, problems arise again so I guess it's some kind of hardware problem.
  Maybe the power supply?
  Have no idea...

  Any ideas?

  any suggestions appreciated

  Hello

  It is not easy to say with certainty what the problem is here. You may have updated RAM or something?
  I don't think it has something to with the power supply, but if you want to have a clear answer the cell phone must be controlled by technicians.

  You did the right thing with the new installation of the OS, but if the problem persists, it must be something with the hardware. I hope that you have installed the image of recovery for test purposes.

• Qosmio F10-136 - power management

  I was starting my Qosmio and while he started and almost ready to work, a poped message saying

  Power management error
  A fatal error has occurred. The program will end. Code: 0x51A

  I tried a few more times to start always get the same message.
  I uninstalled and reinstalled the software from the CD of utilities & tools give me the same message every time.
  I have also reinstalled the 'Modules' by following the instructions on the CD front of re-installation of 'power management.

  Any help will be appreciated. Thank you

  Hello

  Well, it's not easy to say why this error occurs.
  AFAIK, you must the common Modules before you install power management.
  Did you install other programs? On the Toshiba site I found two Power Saver downloads. One for Win MCE and another for Win Xp. I propose to download the right version to reinstall this utility.

  Good bye

• Equium A100-147 - fan never stops

  Hello

  have a fan that once it starts to run it wont stop.
  Does anyone know of a remedy

  Thanks Chris

  On my Satellite Pro M70, cooling fan also constantly works at very low speed. I put t know how it works on your device, but it's normal. Constant running on full speed could be indication on any hardware problem but no precise explanation in your ad, I can just say: it's normal!