Qosmio F20 does not turn on.

Hi, I have a Qosmio F20 which now has desided not to power up.
When I plug in the adapter I have the Green AC power led and battery led lights.
However when I press the button START the Green battery LED turns off and that Orange green AC Power going to THEM. It's her!

To get the two green LEDs, I lead remover AC and battery then reinsert battery lead AC. Then the battery LED is orange for awhile before it goes green.

BTW I've updated 2 weeks RAM (2 x 1 GB), but all was fine with that until now this power issue.

Any help would be greatly appreciated.

Cordially, Steve.

Hello

Looks a little electronic power supply problem.
But have you tried to remove one of the RAMs in order to check if you could power the laptop using a single module of RAM?

You should do
One of my friends could not power the laptop because of the faulty RAM.
I think that it s no doubt worth a try.

In addition, try this:
-Disconnect the battery and AC adapter
-wait little time (1 hour)
-bring together the two parties again
-try to turn on the unit.

If two workaround solutions won't help you then a hardware problem serious has happened and in my opinion, the technician must be contacted in order to verify some parts.

Sorry, but that's all I can suggest.

Tags: Toshiba

Similar Questions

  • Qosmio F20 does not illuminate

    I have a Qosmio F20. It does not turn. When you press the power button on the blue button lights up for a second or 2. Then nothing.
    Do you have an idea what is the problem?
    Thank you

    Hello

    You connect to the AC adapter?
    If you use the AC adapter and battery all at the same time, so I would recommend removing the battery and you try to start Notepad with adapter but no battery.

    The other possibility is that there could be something wrong with the electronic power supply. In this case, the Toshiba service partner should check the device.

  • Qosmio F10 does not accept my recovery cd

    My Qosmio F10 does not accept my restore cd. It will not work in windows or dos mode. In windows, I get the error message. This recovery and applications cd is not configured to work with this machine (laptop). This cd is for: Qosmio G10, Qosmio F10.
    Please use the correct recovery and Applications cd.
    I want to format this model and would really like to use the adequate recovery cd to reinstall all applications that I don't have a windows xp disc. Recovery, one is the only one I have.

    Hello Pam

    Insert the recovery media in the drive and turn off the laptop. Wait a second and turn it on. Press the C button and keep it down. On this track, the unit will start playback DVD recovery and if you use original recovery the recovery procedure will be implemented.

    You cannot reinstall the unit if the operating system is running.
    Good bye

  • Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed

    My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
    Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.

    Help will be less appreciated.
    Thank you

    The same question again?

    Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.

  • Computer laptop Qosmio F15 does not illuminate when the power switch / stop is pressed

    My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
    Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here.

    Help will be less appreciated.

    Thank you

    I agree with kody. Of course, it is not easy to say with certainty why this happens. Who tore your laptop? Service or only you?

    To be honest, I think you did it alone. Have you used maintenance manuals?

  • When I turn my iphone sideway, the video does not turn sideway

    When I watch the video on my iphone, I usually turn my iphone sideway, the video would turn sideways to get the most out of the video. But now it does not turn sideways.  Try to find the adjustment to set the option or the recent updated version this video sideway option removed.

    Swipe up from the bottom of the screen to get to the control center. Press on the icon of a padlock on the right side until it becomes black. If the icon is white, the screen rotation is locked.

  • Toshiba Camileo P10 does not turn

    I have a toshiba camileo p10. The problem is that the camera does not turn. I tried to recharge the battery, but the red light blinks for hours.

    I tried without the battery and the charger plugged but nothing happened. I cleaned the contacts.
    All solutions?

    Have you removed the battery AND the AC adapter?
    Try this. The two parties should be removed/disconnected.
    Leave the camcorder for some time (a few hours). Press and hold button power 30 sec long. After this plug in the battery and charger.
    Wait until the battery has been charged and then try to turn on the cam by pressing the power button.

    Good luck buddy.

  • Toshiba 46HL900A does not turn on

    My TV turns completely. The Red led will turn from red to green, but the TV does not turn on? Someone knows why? Thank you

    Hardware problem might be serious... to be honest, that you have some many options troubleshooting...
    If its material of serious malfunctions, only an authorized technician would be able to help you.

  • camera does not turn on

    I tried to load camera after death, it does not at all, but the orange light is on when it is plugged, let it charge all night and still it won't turn. I videos I would like back, please help.

    The charge indicator lights orange when the charging starts. It seems that the battery is charged. Try to turn on the camera while loading and check if it is turn on.

    Note: The charging light turns off, charging is completed.

    If the camera does not turn ON even when the load is in progress, the service is required.

    You can initiate the service from the link below:

    https://eService.Sony.com/

    You can also contact our telephone support or Chat to try additional troubleshooting procedures.

    http://eSupport.Sony.com/us/p/select-System.pl?Director=contact

    Please provide model # exact camera while contacting support, so that they provide accurate information. You can locate model # on the back panel and it will start with the letters MHS.

    If my post answered your question, please mark it as "acceptable Solution".

  • Satellite PRO U300 does not turn off

    Hello

    I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

    The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

    Some details of my pc are as under:

    Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
    BIOS Version V2.00
    Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

    Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
    Thank you

    JITENDRA

    Hello

    I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

    Power on / off LED is probably what you mean (the other starting on the left).
    Anyway, you turn off your laptop using a standard on the Start button?
    Are you sure you want to use the Hibernate mode.

    Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

    Have you installed something 4 days ago? Or deleted some important application?
    Sorry, but it is not easy to say with certainty what the problem is here.

  • Qosmio Player does not not on Qosmio G30

    Hello

    I got my laptop to out of area using the Toshiba recovery cd and now the qosmio player does not work. I can not play music without having to start Windows.
    I looked in the drive of all programs-utilities Toshiba - qosmio and he says that file not found.

    Help, please

    Hello

    There is a CD that comes with your laptop called:

    For the Qosmio player recovery CD

    you have to start the laptop from this CD, in the same way that you used in the installation of the windows recovery

    and follow the instructions

    concerning
    _________________________

    Please don't forget to take a look here:
    http://forums.computers.Toshiba-Europe.com/forums/help.jspa?helpType=reward

  • Qosmio F30 does not recognize USB devices

    My new Qosmio F30 does not recognize USB devices. Displays Device Manager USB ENHANCED CONTROLLER and ROOT HUB works fine, but the machine still wants to install each device but cannot. BIOS version seems to be V1.30. I tried the devices on other machines, and they work fine.
    Is there something that I missed?

    Hello

    Before your shot the beautiful F30 can you please say what OS you are using?
    Did you use the OS from the Toshiba restore CD?
    On this CD, all drivers must be preinstalled and you don t need to install no matter what chipsets or anything like that.

  • Pavilion 15-e020tx: does not turn off pc portable hp pavilion 15-e020tx

    Hello.
    I have a pc hp laptop pavilion 15-e020tx. It does not turn off and does not wake up mode 'sleep'...

    I tried to restore my laptop to factory setting, updated everything I can, but it still does not work
    Could someone help me please

    Update the BIOS to the current version. A F.24. The direct link to the download is below.

    http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69897.exe

  • Does not turn my Iphone 6? /

    I own an iPhone 6 and I have for a year now. I turned off my phone a few hours ago and went to turn it back to the and it does not work. The apple logo appears, but the screen turns off after 5 to 10 seconds of the projected apple logo. I tried pressing the two keys and I also tried to connect my phone to itunes but it doesn't connect either.

    Press the sleep/wake and home buttons and keep them for at least 10 seconds.

    If this is not enough, take a look at these articles Support from Apple:

    If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

    Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

    More info here:https://support.apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • printer does not turn on

    My Deskjet 6980 printer has stopped working.  It has worked very well so far. Flashing lights said he needs ink. I put in the new ink. Now, it won't turn. The power supply is turned on, the works of output (without surge protector), but the printer does not turn on. In all he has no light on the printer, except light power cord in the back. I tried everything I could find online, but nothing works. My computer was still recording the printer, but since it will not power, says that it is in offline mode. Any suggestions would be helpful.

    The unit may have developed a power failure, but may be also simply in a State of error because of the fresh cartridges.  There are a few steps, I'll try in this case of troubleshooting.

    * If possible, try to remove the cartridges that you recently installed before performing a hard reset of the printer.

    * Hard reset of the printer by unplugging the device, disconnect the other end of the power cord from the wall outlet, separates the power cord of the power supply, wait 30 seconds and plug it back up.

    See also the steps described in the document, found here, to solve a lack of power.  I hope this helps.

Maybe you are looking for