Qosmio F50-108: speakers still work same headphones are connected

Similar Questions

• Speakers get muted when headphones are connected

  HP TouchSmart 520

  Windows 7

  The built-in speakers put muted when headphones are connected.

  Hello

  I had the same problem recently with the urge of 23 I use at work, so I plugged the headphones in the speaker to the back of the computer. The music now plays only through the headphones.

  When the computer is seen from behind, the speaker on your desire output jack is probably close to the lower right. It looks like your headphone output, but it has a small icon that looks a bit like this:
  (((.)))

  In addition, a member of the forum named emmarose has had the same problem; That's how she solved: "the problem was solved when I deleted and reloaded the sound driver," she wrote.

• HP ENVY23 - D6U52AV #ABA: speakers put muted when headphones are connected

  I tried after an option provided in other post but does not solve my problem in windows 10

  Try the following steps to see if they solve your problem.

  1 right-click on the icon sound in playback devices select system tray

  2. click on speakers (no helmet) so no default device makes your default device

  3. click on the recording tab

  4. click on mix stereo click right properties

  5. go to the listening tab

  6 playback through this device make sure that your headset is not selected

  7. repeat the process for your headphones by ensuring that the reading is not through speakers so

  Thanks for the reply with more details.  It is similar in appearance to me that help me in another forum.  But all the measures I mentioned it solve my problem and now I don't see any problem between audio switching between the built-in speaker or headphones.

  Concerning

• Qosmio F50-108 - rustling sound in the speakers for a second or two

  I recently purchased Toshiba Qosmio F50-108. I am very satisfied; the only thing that bothers me is the rustling sound in the speakers. The rustling sound appears only occasionally on higher volume (system volume) and Winamp or WMP volume and lasts for a second or two. It is not such a problem bi but it's embarrassing to hear the rustling all the few minutes when listening to music.

  Harman/Kardon speakers have also some reputation so I t think that rustling is normal. If someone else got the same problem with speakers, please answer.

  Well, what to say, I think that it s a normal question if you want to hear music on the volume level high. Almost all the speakers would be rustle a little bit some time if you increase the volume to maximum.

  But if you think it's a hardware problem, then you must contact the Toshiba ASP in your country for a control.

  Welcome them

• Qosmio F50 - 108 b - issue of upgrade hardware

  Hello!

  I have the Qosmio F50-108 b. I am considering buying the new processor for my pm45 chipset, but I can't find information about my support for the cpu bios. I stopped the Q9100... its very very fast. The chipset support, but what the BIOS? I think that to give a chance to the ddr3 memory, so I buy two Privateers 4 GB ddr3 1333, which I suppose to work normally on 1066... Maybe a little more if I can clock the FSB: P.

  BTW I have successfully recorded video (9700M GTS) of 540 clock 1325 shader 799 mhz to 690 memory memory clock 1700 shader 1040 Central. Just be sure to clean your computer from inside well so that the heat will not stop you: P

  You know more about its use at these frequencies? I hope the laptop takes care of everything? Advice please on future updates to this subject :)

  > The chipset support, but what about the BIOS?

  This is not mentioned on any page of Toshiba which I could find in the internet ;(
  But I guess you would have a good chance using a CPU that is taken in charge by the chipset, but it's my personal opinion

  In addition, I found this doc from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

• Qosmio F50-108 - monitor flicker

  Hello! I have a Qosmio F50-108, and recently, I noticed that the screen flickers.

  It looks like a neon sign that is on out. Fortunately, which happened yet, but I'm really afraid that my monitor can suddenly go blank one day. No matter which option to choose, and whether or not its clogged, it still happens.

  Has anyone ever encountered this problem? Help.

  You have this problem on the internal or external screen?
  If a display is flashing, the screen itself is faulty, the FL tube is the cause of the error

  I think your laptop is relatively new, so I would go to an ASP. They can check your laptop, to order parts and change if it of necessary.

• Qosmio F50-108: How do I use the NVIDIA SLI technology

  I own a laptop Qosmio F50-108 and it has a Nvidia GeForce 9700 M GTS graphics card that supports NVIDIA Sli technology.

  How to use this feature?

  Hello

  AFAIK your Qosmio model was equipped with card NVIDIA GeForce 9700 GTS * M * graphics chip.
  It should support the PureVideo HD, HybridPower, etc.

  The HybridPower is a switch between performance or battery life.
  If you need more graphics power, you can turn it on and if the graphic power is not needed, you could disable to extend the battery working time.

  AFAIK the HybridPower can be enabled in Vista manually Power Options in Vista and in according to some gossip in the next time that the nVidia driver should control this function automatically. But these are only a few gossip that I found on various Web sites.

  Maybe this can be useful:
  http://HotHardware.com/articles/NVIDIA_Hybrid_SLI_and_nForce_700a_Chipsets/

  Big names

• Weird problem with Qosmio F50-108 - power power button

  Hello

  I have strange problem with button / stop on Toshiba Qosmio F50-108 - pressing the power button won't start the computer. Now, the computer starts only when I press the first button to the right of the power button (Toshiba button Support).

  It's as if the buttons have been activated. The power button is still able to stop the laptop or put on standby when you press on, but it no longer starts. Recently, I had my laptop on the service, but I put t know if it has been opened or not. Is it possible that the problem is hardware related or is - this serious just of system configuration? It would help if I Flash the BIOS? Otherwise I will take to the service again.

  Thank you for the answers!

  Hello

  If the laptop was on the service, please call them and explain the situation. Start button / stop is only the button that can be used for the specification of switching on and, as far as I know, it cannot be changed with certain parameters.

  I assume that there must be a contact problem.

  Call and see what they say on this subject.

• Cannot install Windows XP on the Qosmio F50-108

  I got the Qosmio F50-108 with Vista.

  I dislike Vista so I tried to install XP.
  Unfrtunatelly, I get a BSOD every time XP takes over for the first time (startup). Usually, when there is a problem of sata, XP tells you while there's no HARD drive, but I do not get this message, I get a BSOD.
  I don't know why there is no support for XP in fact I know that Microsoft paid toshiba to stop supporting Windows XP.

  Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.

  I know that there is a possibility, I know that an update of the bios might help, but toshiba does not.
  Dear Sirs to Toshiba, I know you know what I have to do in order to get XP running on a Toshiba computer, so please, help me.

  Hi guys

  You can install XP on each laptop Toshiba. But you knew how! : D

  Your Windows XP CD must contain the SP2. This is important because the new laptops no matter which manufacturer need SP2 patches due to some hardware compatibility issues!
  Without the SP2, you will receive a BSOD!

  Then, the new notebooks support SATA drives hard and new SATA controllers!
  Windows XP and Vista operating systems do not contain the SATA drivers, and therefore you must include first before running the installer of the OS.
  Or you can disable the SATA in the BIOS. You will need to switch from AHCI to compatibility mode.

  Then, you must install the XP window successfully.

  So finally, I must say that I really don't understand these comments like this:
  > Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.
  OK, I see you're frustrated because you cannot install the operating system, but he must know that this is not a problem of laptop, but it is only a case or a knowledge!
  So maybe you should learn more about new technologies and you'll know how things are working. ;)

  To all here-> greetings & peace;)

• Qosmio F50-108 - question of front operation panel

  Hello, I have a qosmio F50-108 and the front panel does not work me, I think I uninstall a program. Please link to the driver. Thanks Astier

  Sorry for my bad English

  Hi Astier

  Sorry, but I don't understand what you are meaning exactly façade?
  Do you mean like the Toshiba control buttons (play, pause, stop, etc.)

  If you are which means these buttons and if you deleted a driver that controls these buttons then a solution should be easy.

  First of al, you should try to define the operating system at the beginning of time until you have deleted this driver. To do this you must use the system restore utility.

  Second, if the procedure described above does not work, try reinstalling the VAP (value added package).

• Need to WIn8.1 webcam driver for Qosmio F50-108

  Hi all!
  I'm looking for Toshiba Qosmio F50 - 108 the camera driver. I have windows 8.1.

  Someone know where I can find it?

  As much as I know Toshiba does not have webcam driver for Win8/Win8.1.
  Operating system uses the standard Microsoft driver.

  I think this Qosmio is old enough laptop model. But in general, I don't know if your Qosmio is supported for Win8/Win8.1 or not?

• Need some guide to the Qosmio F50-108

  Hello

  I was wondering if I can get a guide how on my qosmio F50-108... my fan makes a big noise really.
  I want to check what is going on... my warranty has expired 4 months ago... So can I get a guide please?

  Problem is that the "Maintenance manuals" are not a public document and cannot be downloaded.
  You want to disassemble your laptop and clen it upward?

• Qosmio F50 internal mic not working not

  Hello

  The internal mic on my Qosmio F50 has suddenly stopped working. I tried to configure, but it doesn't seem to be picking up all the sounds. I have also tried reinstalling the sound and chipset drivers but had no luck.

  Help, please.

  Hello

  You must also make sure that the webcam software is open (in the taskbar) when you use the internal mic.
  As has already been suggested but the user above, the microphone is a part of the webcam and you can configure the internal mic in the webcam Chicony help software.

  Welcome them

• Re: Screen color configuration for Qosmio F50-108

  Hello
  Can you please tell me what color of screen configuration you use for toshiba Qosmio F50-108?
  Mine seems quite strange...

  Thank you

  I always use default color settings, and I'm happy with it.
  You have some problems with the display of colors?

• I could use a second HDD in my Qosmio F50-108

  I could put a second HDD in my Qosmio F50-108...

  What should I be careful?

  What HARD drive to buy?

  Thank you...

  Post edited by: dpasinis

  I doubt that this is possible.

  As I m not wrong not the F50-108 belongs to the series of PQF55E and verification of this series of models, I found and the info that this laptop supports a 320 GB (5400 RPM) SATA HDD but it doesn t support the second HDD.

  However, I would recommend checking the bottom of the unit. Is there a possibility for an upgrade of the HARD drive then you should find a second HARD drive with a SATA HDD connector Bay.

  Concerning