Qosmio F50: No installable VirtualPC

Similar Questions

• Qosmio F50-12 b - list command installation Driver for Windows 7 64 bit

  Hello

  I need the * driver installation and list order list * of my * QOSMIO F50-12B - PQF55E * for * WINDOWS 7 - 64

  For example:
  Install in order:

  1-chipset utility
  2-value Pack
  3 Touchpad Driver
  ... and so on.

  The required the mailys expert solutions. _

  Thank you.

  Hi kurtb,.

  The "C3PO" user already post the order of installation for Windows 7 64-bit on Qosmio F50. Did you find this thread?
  [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=210636]
  > {Quote: title = C3PO wrote:}
  >
  >} {quote} - Windows 7
  > - Chipset driver
  > - Storage Manager
  > - Display driver
  > - Driver sound
  > Driver LAN.
  > - WLAN driver
  > - Bluetooth driver
  > - Infrared driver
  > - Utility modem
  > - Driver card reader
  > - Webcam driver
  > - Toshiba Value Added Package
  > Support utility - Toshiba Flash Cards

  And if the FN keys do not work after installing Windows 7 you should check this interesting thread:
  [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=184578]

• Qosmio F50 - need to update the BIOS in the order of installation Win7 64-bit

  Dear community,

  I plan to upgrade to Windows 7 64 bit. My laptop is Toshiba Qosmio F50 - 10 M with a VISTA32bit preinstalled.

  Is it necessary to update the prior consent of BIOS install the new OS? I read that there is a BIOS update Fa? ¼r VISTA64bit available, but none that I discovered for Win7 64 bit.

  Can give you a hint?

  I am confident and happy to own a laptop as powerful but this not filled OS named VISTA makes me nuts more in addition to reading all these great reports about the benefits of Windows7!

  Looking forward to read your welcome responses

  Yours,
  Starmind

  Hello

  Is there a BIOS for Vista 32 bit and 64 bit.
  There is no special Win 7 BIOS.

  If you want to install Win 7 64 bit, I advise to use the BIOS for Vista 64-bit. If you want to install Win 7 32 bit-> choose vista 32-bit BIOS.

  Generally, it should be possible to upgrade the BIOS under Win 7 so, but because that it s a BIOS for the Vista operating system, I recommend upgrading the BIOS in Vista.

• Not possible to install the printer on the Qosmio F50

  I have a Qosmio F50 - 10 M, running on Vista 32 bit SP2.
  I tried several times to install a new color printer HP Laserjet MFP276nw 200 without success. The error text is not specific...
  The installation software, I should contact my provider of system support.
  Well, I'm here...

  Does anyone have any ideas how to install this printer on my system?

  Kind regards
  Kai

  To be honest with this problem. If your laptop works well, and the OS is stable why laptop of the manufacturer must be responsible if there is a problem with the installation of the software of third party?

  In my opinion, you should contact the printer manufacturer software and ask why you cannot install their software on many working Windows System. I use HP 120 Envy with my machine and I had no problem at all (win7 64 bit).

• Impossible to install Win7 on my Qosmio F50

  Hello
  I hope you can help me in my problem. I have laptop old model Qosmio F50 - 10G #. PQF55E-00V012AR. It is installed windows vista Home premium. For my desired to change my OS to windows 7, I reformat real proper installation.

  the problem is, it can be install any OS same win XP and win Vista.

  Windows Vista and Windows 7 this page that I load the hard disk system. It cannot detect the hard drive. I'm trying to install the driver AHCI of it but his failure, now, even windows xp cannot install, it's error when he reach windows boot.

  What can I do if I installed an operating system?
  Help, please.

  I put t really know what the problem is here. By default the BIOS settings and try again to install Win7.
  Do you use the original Microsoft installation disc?

  Start your laptop and press F12 to get into the boot menu. When the menu is displayed on the screen put Win7 disc in ODD, choose the CD/DVD drive and press the button enter.

  What happen exactly when you do this?

• Problem on the Qosmio F50 - 10Z card reader

  I had this problem for a while, he started with the original OS Vista 32-bit, so I decided to buy the cd to upgrade toshiba for windows 7, after the update level, everything worked fine, except for the card reader, regardless of how many times I have installed/uninstalled, installed the driver, it wouldn't work!

  So I used the recovery cd, not once BUT TWICE, and nothing helps I sent to repair.
  I received a message on a piece of paper telling me that it would work on the original operating system, I thought that they had something fixed.
  Then I used the recovery cd AGAIN and to my excitement thrown short to see any yellow explanation points I put a micro sd card (2 GB) that worked when I bought this laptop first and got no response.
  The biggest problem is that my warranty is now closed!, so basically, I've been HIT MORE, cause the memory card slot does NOT WORK and it wasn't a software problem!

  Any reccomendations?

  Hi karimtarek,

  Which driver version you are using on Vista and Windows 7? My Qosmio F50 is running Windows 7 and I m using the version of the driver on Toshiba page 1.00.29.02.
  You use the same version?

  In addition, it would be interesting to know if the SD card has worked once you have received the notebook service center back. Have you tested before or did you start installation recovery immediately?

  Have you tried different brands of SD cards? I always use the SanDisk Extreme cards because they did not no problem.
  In addition, you could try updating the BIOS. Maybe this works if you are using an older version

  Last but not least if it s does not always work and you think that it s a hardware malfunction, ask at the center of service again. If you speak a bit with technicians, maybe they can fix it as a gesture of goodwill.

  Good luck! :)

• Little help for a Qosmio F50 and win 8 is required

  Hello

  I have an old Qosmio F50 and since he still has enough power to manage Windows 8 I decided to give it a try. What I did is a clean install of WIN 8 x 64 pro and I used a mixture of various models of Toshiba drivers and third parties. The results were not bad, since everything works except for a weird thing.

  Specifically, I used:
  -Drivers of the Chipset V, 9.4.0.1022 directly from Intel.
  -V with Toshiba HD processor driver, 1.0.2.71
  -Enecir v. 2.7.4.1 drivers
  -Realtek High definition audio drivers R271
  V battery Bluetooth 8.00.12 (T)
  -VGA Nvidia 320.49 drivers
  -ALPS V8.x0.303.206 drivers for the touchpad
  -Camera assistant software v 1.7.260.0526L (a bit unstable and settings reset every now and then, but always functional.) The most recent camera app couldn't handle the old Chicony)
  -Everything was provided by Windows Update.

  And finally, I used:
  Toshiba 1.00.6626.06 function key, cards Flash 1.51.8.2C (version b) .and v.1.3.3.64 SpecApp.exe (aka the button support)

  The only problem I have is with the touch media buttons. While working as it should and I can remap them with the SpecApp.exe very well, they do a crazy thing:
  Sometimes, as well as the proper functioning of the button will open also calculator of windows which is quite annoying. I tried many things including the search in the registry, but I couldn't find a way to solve it, so if someone could help that would be great.

  Other than this problem, everything works just perfect, including all FN keys.

  Thank you for reading and if you have an idea I'm all ears.

  It is always a challenge to such experiences as new installation OS on an old machine and unsupported. Let's see if someone else with the same machine had success with Win8.

  Anyway, there is always something that will not work correctly. The key is that most of the stuff works well, so if you will not be able to find the solution for touch buttons, in my view, that it's not so bad.

• Qosmio F50 - the hard drive recovery?

  Hello

  I had a very big problem.
  I've made a few changes with my Vista regs and then I was unable to start again.
  So, I started the recovery program (second HARD drive), backed up my files and selected whole HARD drive recovery.

  Well, now problem - everything was going well, but when I walked into the Vista installation I had to shut down the computer.
  Now, when I start up the pc and load Vista I message I need to reinstall my computer again.

  Well, they say nothing about how load the recovery file but I have no option for this - only emergency mode, with the support of network, etc., but without recovery emergency. Moreover, when I select emergency mode, I can't load Vista-it says I need to run the Setup in normal mode, which told to re - install. Yep, circle-_-.

  Model: Qosmio F50

  Do you think that when I erase all the Vista disc manually - for example with linux, and then start the computer, I get a possibility to load the second part of the drive to start the installation?

  Thanks in advance because I'm really despair

  Hello

  > So, I started the recovery program (second HARD drive), backed up my files and selected whole HARD drive recovery.
  I'm a bit confused of m.
  How do recover you the laptop?
  Have you used the Toshiba HDD recovery option which could be launched by pressing F8, select fix my computer-> Toshiba Recovery?

  Usually, it is a procedure how to start the Toshiba HDD recovery.

  I guess you didn't create a recovery Toshiba drive in the past is good?
  It was a big mistake buddy because the recovery disk would help you in difficult situations

  Well, as I said above; You can try to start the HARD drive recovery. If this will not help you I think that you would need a Toshiba Recovery disk.
  You can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Qosmio F50-12 b Win7 64 bit driver problems affects Fn, Power Saver, Tablet

  Hello

  I have Toshiba Qosmio F50 - 12 b. initially, I have Vista Ultimate 32 bit, then I refresh installation of Windows 7 Ultimate 64-bit...
  This is the problem,

  I installed all the drivers for my operating system and the computer, but I can not installed or activated FN key, TouchPad, PowerSaver of Toshiba and the keys palpable above the keys of Func/digital as Dolbly, Media Center, Forward, Backward, Mute-, lights-touchpad on - off utility.

  ? also tried vista 64 drivers for these things, but nothing works to them.
  I tried auto updater Toshiba win 7driver tool (tsi4win7.exe), but nothing changes.
  I need help on this situation... Is anyone know how active these utilities, in particular the FN keys and touchpad!

  Thank you...

  I hope that the Toshiba support my voice up and help this time :)

  Hi mate

  The 64-bit value Wi7 package and Support of Flash memory card utility must be installed.
  Flash Card Support utility controls the FN keys and you should install it, after installation of VAP.

  Also the media control buttons should work after the installation of the package value.

• Qosmio F50 - 133, infrared non-operational

  I have a qosmio F50-133, in which, after a new installation of license Windows 7 (upgrade Toshiba) I can t use the built in infrared device.

  I use infrared communication with multiple devices, it is therefore a very important communication port.

  In addition, in the settings folder of device (under computer/device settings) it s nothing information bad and there, under devices of human interface, a correct installation of the IR receiver ENE CIR HID and Microsoft ehome transceiver

  Can you please help me solve this issue!

  As far as I know, after completing the upgrade Toshiba you must insert composite CD again to install the missing drivers.
  On the Toshiba download page, I see driver infrared listed for Win7, so try to reinstall Vista version 2.5.0.0.

• Media bar stopped working on my Qosmio F50-126

  I have a Qosmio F50-126 and bar media (next to the switch) stopped working and answer since I did the cover... the lights in the corners has also stopped working.

  What is the problem?
  Please help me...

  >.. Since I did the recovery
  Can you please explain what do you mean exactly.
  As part of the recovery, I understand you have installed the operating system using recovery Toshiba installation image and now you're using your laptop with the factory settings. Am I right about that?

  Have you can be installed some additional software or Windows updates?

  I mean question like what is the problem is pretty funny?
  Can you imagine I ask follow you: I can't start my car, what is the problem?
  What you can say about it, not much. Just speculating what may be the reason.

  If possible, reinstall the OS and test it immediately without having to install additional stuff. It should work well.

• Re: Qosmio F50 - 10M - how to install the 64-bit version of BIOS?

  Hello guys,.

  I've updated my Qosmio F50 for Windows7 Professional 64-bit by installing the scratch (deleting these VISA32bit; from formatting the partition/hard drive).

  I installed the BIOS version 2.20 update 64 bit installation process stopped saying something like: "you already have the latest version of the bios. Of course, I made the misstake install the bios with the same number of version 2.20 while I used vista, but this version was the 32 bit one.

  How can I convince the computer to accept the 64 bit version of the BIOS installed (because it seems not to recognize that it is different) and what are the special benefits from 64 to 32-bit version of the BIOS?

  Thank you for your kind replies.

  Yours,
  Starmind_1

  Hey,.

  Are you sure that you have installed the WIN32 of BIOS version if this error message appears?

  Last year I also changed the BIOS to a WIN32 for WIN64 version and it was no problem. Update worked correctly, but I did this update on the preinstalled Vista version of Toshiba.

  It works when you try the update of Vista?

• Qosmio F50: How can I install Vista Business

  Hello!

  I recently bought qosmio f50 and it came with the home edition of vista...

  I need to install Vista professional.
  How can I do?
  I have to format it?
  So how do I install back all the utilities and drivers which it came with?
  I have problems with my laptop if I do this?

  Post edited by: xaralas

  Hello

  The Vista installation is not difficult.
  He just put the Vista disk in the STRANGE and then start from the disc.
  The installation will start automatically.

  But this will format your HARD drive and you will lose your installed Win XP and other files.

  > How can I install back all the utilities and drivers which it came with?
  I guess you have a Toshiba Recovery disk.
  If you want to retrieve the OS installed by Toshiba, then you need to use the Toshiba Recovery for recovery disk.

  PS: what Qosmio F do you have exactly? I ask because 108 F is not known to me

• Qosmio F50 - How can I put the keys Fn and Hotkeys to run on Windows XP?

  Hello.

  I lowered my Qosmio F50-137 to XP, found all the necessary drivers for the hardware recognition, but still looking for Fn keys and keyboard shortcuts work.

  I know (or at least think) that I need to install the "Toshiba Hotkey Utility.

  But this utility requires the "Toshiba common module" for Windows XP must be installed.
  I like the web modules two Commons for Windows XP:
  common_modules_2489A
  and
  common_modules_24895A

  The first says "this software utility does not support this system. Installation will end.
  The other said "the TVALZ driver installation failed."

  How can I do the installation work correctly? or how I do Fn keys and shortcuts keyboard works on my F-50?

  Thanks in advance
  Camusensei

  Hello

  May I ask where you found this common modules for Qosmio F50?
  I checked the page European driver of Toshiba and found only Vista drivers; 32-bit and 64-bit
  There is no drivers Win XP!

  I guess you have tried to install common Modules that are not designed for the F50 series and so this error message appears

• Install XP pro or monitoring of Qosmio F50

  Hi all

  I would buy a Qosmio F50, but it has Vista installed on it. And I prefer XP so I would like to know if it is possible to install XP pro or monitoring on this computer, because I saw that there are only the Vista and not XP drivers on the support page of the toshiba site. And if possible, could you tell me where I can find these drivers XP?
  It's the only thing that can stop me to buy the F50 (Qosmio of course, because I will never buy a Ferrari in my life lol)

  I apologize if there are errors in my text, because I am French (and you know that we are still on strike when we had to go to school to learn English lol)

  Thanks for your replies

  Theoretically, I see no problems with installation of WXP but this laptop model is not supported for Windows XP Home edition you will never be able to get 100% working. Computers laptops Qosmio are portable multimedia and if you want to use it 100% you much Toshiba designed tools and utilities.

  If the tools and utilities are not designed for Windows XP Home edition, you will be able to use your laptop for basic stuff. To be honest, I can understand your wish to install Windows XP Home edition, but you also have to look forward and learn to use the new operating system. I'm using Vista more than a year now and I am satisfied. With the right configuration, you will have good and stable operating system.

  I've also tested Windows 7 and I am sure that the system will work better than Vista. So I say buy Qosmio F50 is the right decision. Optimize Vista preinstalled and enjoy this beautiful laptop.

  You can also install Windows XP Home edition on the second partition and use two operating systems.