Qosmio F50 - 133, infrared non-operational

Similar Questions

• Point floating invalid Qosmio F50: not of WebCam - operation & issue FN

  1. After installing various software on my F50, the webcam no longer works and I get an error "floating point invalid Operation."
  However, the internal cam works when I use the move controller.

  2. after the installation of new Zone Alarm Security Suite the function of the 'FN' key always ends with a blue screen (something to with IRQ and Flash memory on the disk, the message appears fast enough so I do not know exact wording)

  Can someone help a solution and workaround?

  Thanks for help

  For the guys from Toshiba.
  I got a couple of Toshibas not in the last few years and after awhile of verious software installation some problem or the other gets up, cant, a put some funktions in ROME, so that no other software will cause no problem.
  I turned off automatic function of MicroSoft Update, because I also had problems after an automatic update.

  > 1. After the installation of various software on my F50, the webcam no longer works and I get an error "floating point invalid Operation."
  However, the internal cam works when I use the move controller.
  I recommend reinstall the VAP (value added package).
  The VAP contains several applications that control the FN keys.
  Notes; the previous PPV should be removed everything first.

  > 2. After installing the new Zone Alarm Security Suite the function of the 'FN' key always ends with a blue screen (something to with IRQ and Flash memory on the disk, the message appears fast enough so I do not know exact wording)
  I had the Zone Alarm Security Suite also but I wasn't satisfied because this firewall locked some applications that were installed on my HARD drive
  Several times the laptop froze because running applications not can start due to Zone Alarm
  I m not a fan of this software, so in my opinion, you should remove the he and the BSOD should disappear.

  Welcome them

• Qosmio F50 - 10 M - infrared driver for Windows 7 64 bit missing

  I want to change my OS from VISTA (32 bit) to Windows 7 (64-bit), I'm on downloading all the drivers needed for the proper functioning of my laptop in the future.

  When the choice of my laptop (Qosmio F50 - 10 M) and operating system (Windows7 - 64 bit) there is no more infrared driver (for my remote).

  Do I need to have a driver for the infrared interface (which I have and is downloadable with VISTA32)?
  If Yes, where can I get it?

  Thank you very much for the help!

  Kind regards
  starmind

  Hi Starmind_1,

  I n t have remote to test my Qosmio F50 so that I can t but if there is no driver for Windows 7, I guess that the 64 bit Vista driver should work fine on Windows 7. In addition most Vista drivers also work on Windows 7 so it s worth a try! :)

  But from my own experience, I can say that Windows 7 64 bit works like a charm on Qosmio F50 and in my opinion better than Vista. I used all the drivers from the official website of Toshiba and don t have problems.
  Everything works great! :)

• Qosmio F50 - Webcam Error - Invalid floating point operation

  Hello

  I have a Qosmio F50 (4 weeks) problem is after two weeks webcam stopped working * not valid floating point operation *.
  I have to close the program via the Task Manager, * software camera Wizard does not *.

  Have you tried next.
  Update all drivers, System Restore

  Toshiba help line after all the efforts suggest all reinstall them it is aggressive for me, because he would lose some software on the laptop that I had to transfer old PCs and had to plead with some software companies to transfer (as a single license etc.).

  If someone else has had this problem and is there a simple solution

  Will be

  Hmm, you could remove the software of the webcam of the system and could remove too the webcam from the Device Manager.
  Then you could clean the operating system using the CCLeaner

  This software is free and it can clean the registry and the system. I use it very often.
  Then restart the laptop and try to reinstall the software of webcam again.

  Good luck

• Qosmio F50-108 - question of front operation panel

  Hello, I have a qosmio F50-108 and the front panel does not work me, I think I uninstall a program. Please link to the driver. Thanks Astier

  Sorry for my bad English

  Hi Astier

  Sorry, but I don't understand what you are meaning exactly façade?
  Do you mean like the Toshiba control buttons (play, pause, stop, etc.)

  If you are which means these buttons and if you deleted a driver that controls these buttons then a solution should be easy.

  First of al, you should try to define the operating system at the beginning of time until you have deleted this driver. To do this you must use the system restore utility.

  Second, if the procedure described above does not work, try reinstalling the VAP (value added package).

• Qosmio F50 - need to update the BIOS in the order of installation Win7 64-bit

  Dear community,

  I plan to upgrade to Windows 7 64 bit. My laptop is Toshiba Qosmio F50 - 10 M with a VISTA32bit preinstalled.

  Is it necessary to update the prior consent of BIOS install the new OS? I read that there is a BIOS update Fa? ¼r VISTA64bit available, but none that I discovered for Win7 64 bit.

  Can give you a hint?

  I am confident and happy to own a laptop as powerful but this not filled OS named VISTA makes me nuts more in addition to reading all these great reports about the benefits of Windows7!

  Looking forward to read your welcome responses

  Yours,
  Starmind

  Hello

  Is there a BIOS for Vista 32 bit and 64 bit.
  There is no special Win 7 BIOS.

  If you want to install Win 7 64 bit, I advise to use the BIOS for Vista 64-bit. If you want to install Win 7 32 bit-> choose vista 32-bit BIOS.

  Generally, it should be possible to upgrade the BIOS under Win 7 so, but because that it s a BIOS for the Vista operating system, I recommend upgrading the BIOS in Vista.

• Qosmio F50 - order Driver Install on Vista 64-bit

  Hello

  I have a laptop Qosmio F50 - 10 M with vista 32 bit home premium preinstaled.
  I bought a new Vista ultimate x 64 operating system. I want to make a fresh reinstal but I now also is VERY important the driver installation in order to have a perfect result.

  Can someone help me?
  Sory for my bad English.

  Hello

  I installed Vista 64-bit on friends Qosmio F50 with success and here are the order of the facilities:

  Windows Vista SP1 64-bit
  Driver Chipset V8.7.0.1007
  Storage Manager
  Display Driver nVidia
  Audio driver
  Network driver
  Pilot of the Alps touchpad
  or
  Synaptics Touchpad Driver
  Card reader controller
  TOSHIBA Modem driver
  Modem region Select Motorola V2.2.3.x
  WLAN Intel Driver
  or
  Atheros WLAN Driver
  or
  WLAN Driver Realtek
  Driver webcam
  64-bit Bluetooth stack
  Infrared driver
  TV tuner
  Value Added Package
  Hardware configuration
  Password utility
  Memory card support
  Fingerprint utility
  Config Free
  WPS library
  Assist
  Dolby Control Center
  Acoustic silencer
  TOSHIBA DVD player
  TRS driver
  HDMI Control Manager
  TOSHIBA gesture controller
  FaceRecognition

  Good luck!

• Wake up the Qosmio F50 - 10G system mode 'sleep' and boots account locked window

  Why when the laptop is put to sleep and left for a while, flashing light and stops when you press the power button / laptop will wake up showing the BIOS screen then boots in the window account locked?

  Why I get this is event viewer? Source ACPI
  The embedded controller (EC) data returned when none was requested.
  The BIOS may try to access the European Community without synchronization with the operating system.
  These data will be ignored. No further action is necessary; However, you should check with the manufacturer of your computer for an updated BIOS.

  When Windows 7 starts, the icons on the desktop, menu start and records are white then start then normal fill when seen once again, any reason why?

  I used Windows 7 drivers.

  Thank you

  Hey mate,

  I have too many Qosmio F50 and you can change the option if, after hibernate or stand-by the account should be locked or not. As far as I know that this can be changed in power management.

  About this window of Event Viewer, I never heard talk about this and my Qosmio F50 works fairly well with Windows 7. You have installed all the drivers for it? You have yellow exclamation marks in Device Manager?

  I also used Windows 7 drivers, but did you download from the Toshiba page? These drivers are pre-tested and normally should work pretty well.

• Need to WIn8.1 webcam driver for Qosmio F50-108

  Hi all!
  I'm looking for Toshiba Qosmio F50 - 108 the camera driver. I have windows 8.1.

  Someone know where I can find it?

  As much as I know Toshiba does not have webcam driver for Win8/Win8.1.
  Operating system uses the standard Microsoft driver.

  I think this Qosmio is old enough laptop model. But in general, I don't know if your Qosmio is supported for Win8/Win8.1 or not?

• Impossible to install Win7 on my Qosmio F50

  Hello
  I hope you can help me in my problem. I have laptop old model Qosmio F50 - 10G #. PQF55E-00V012AR. It is installed windows vista Home premium. For my desired to change my OS to windows 7, I reformat real proper installation.

  the problem is, it can be install any OS same win XP and win Vista.

  Windows Vista and Windows 7 this page that I load the hard disk system. It cannot detect the hard drive. I'm trying to install the driver AHCI of it but his failure, now, even windows xp cannot install, it's error when he reach windows boot.

  What can I do if I installed an operating system?
  Help, please.

  I put t really know what the problem is here. By default the BIOS settings and try again to install Win7.
  Do you use the original Microsoft installation disc?

  Start your laptop and press F12 to get into the boot menu. When the menu is displayed on the screen put Win7 disc in ODD, choose the CD/DVD drive and press the button enter.

  What happen exactly when you do this?

• Problem on the Qosmio F50 - 10Z card reader

  I had this problem for a while, he started with the original OS Vista 32-bit, so I decided to buy the cd to upgrade toshiba for windows 7, after the update level, everything worked fine, except for the card reader, regardless of how many times I have installed/uninstalled, installed the driver, it wouldn't work!

  So I used the recovery cd, not once BUT TWICE, and nothing helps I sent to repair.
  I received a message on a piece of paper telling me that it would work on the original operating system, I thought that they had something fixed.
  Then I used the recovery cd AGAIN and to my excitement thrown short to see any yellow explanation points I put a micro sd card (2 GB) that worked when I bought this laptop first and got no response.
  The biggest problem is that my warranty is now closed!, so basically, I've been HIT MORE, cause the memory card slot does NOT WORK and it wasn't a software problem!

  Any reccomendations?

  Hi karimtarek,

  Which driver version you are using on Vista and Windows 7? My Qosmio F50 is running Windows 7 and I m using the version of the driver on Toshiba page 1.00.29.02.
  You use the same version?

  In addition, it would be interesting to know if the SD card has worked once you have received the notebook service center back. Have you tested before or did you start installation recovery immediately?

  Have you tried different brands of SD cards? I always use the SanDisk Extreme cards because they did not no problem.
  In addition, you could try updating the BIOS. Maybe this works if you are using an older version

  Last but not least if it s does not always work and you think that it s a hardware malfunction, ask at the center of service again. If you speak a bit with technicians, maybe they can fix it as a gesture of goodwill.

  Good luck! :)

• Qosmio F50 - black screen on startup

  Hello

  I have a Toshiba Qosmio F50 and something very wired that happened to me today, I was just on the internet and I got bored so I took off the laptop.
  After maybe 10 minutes I restarted it upward and the screen is all black, I can hear the cell phone that works but the screen is all black and I tried to connect to a monitor and he won t do anything, even with the HDMI port.

  Any help is welcome
  Thank you.

  Try please to start several times to see if the same thing will happen again and again.
  After start the leave during a period of time see if you hear the typical sound of windows operating system starts. Then try to use the FN + F5 key combination to see if you can switch to the back of the office.

• Qosmio F50-12 b Win7 64 bit driver problems affects Fn, Power Saver, Tablet

  Hello

  I have Toshiba Qosmio F50 - 12 b. initially, I have Vista Ultimate 32 bit, then I refresh installation of Windows 7 Ultimate 64-bit...
  This is the problem,

  I installed all the drivers for my operating system and the computer, but I can not installed or activated FN key, TouchPad, PowerSaver of Toshiba and the keys palpable above the keys of Func/digital as Dolbly, Media Center, Forward, Backward, Mute-, lights-touchpad on - off utility.

  ? also tried vista 64 drivers for these things, but nothing works to them.
  I tried auto updater Toshiba win 7driver tool (tsi4win7.exe), but nothing changes.
  I need help on this situation... Is anyone know how active these utilities, in particular the FN keys and touchpad!

  Thank you...

  I hope that the Toshiba support my voice up and help this time :)

  Hi mate

  The 64-bit value Wi7 package and Support of Flash memory card utility must be installed.
  Flash Card Support utility controls the FN keys and you should install it, after installation of VAP.

  Also the media control buttons should work after the installation of the package value.

• Media bar stopped working on my Qosmio F50-126

  I have a Qosmio F50-126 and bar media (next to the switch) stopped working and answer since I did the cover... the lights in the corners has also stopped working.

  What is the problem?
  Please help me...

  >.. Since I did the recovery
  Can you please explain what do you mean exactly.
  As part of the recovery, I understand you have installed the operating system using recovery Toshiba installation image and now you're using your laptop with the factory settings. Am I right about that?

  Have you can be installed some additional software or Windows updates?

  I mean question like what is the problem is pretty funny?
  Can you imagine I ask follow you: I can't start my car, what is the problem?
  What you can say about it, not much. Just speculating what may be the reason.

  If possible, reinstall the OS and test it immediately without having to install additional stuff. It should work well.

• Question of updating the BIOS for Qosmio F50 - 10 k

  Hiya:

  + This Bios update adds functionality to your system. +
  + (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard. +
  "+ When the computer turns on, the BIOS is launched to perform various functions to start). +

  + For detailed updated information, please refer to Toshiba-setting to update BIOS Information +.

  + Toshiba - 2.00 - WIN32 Qosmio F50 +.

  It will work on toshiba F50 - 10 k, Windows xp, sp 3?

  [Notebook-> Qosmio-Qosmio series > F-> Qosmio F50 | http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU]

  Post edited by: kirekk

  Qosmio F50 - 10 k belongs to the series of PQF55E.
  If you want to update the BIOS, you will need to use the BIOS exactly for the F50 PQF55E series.

  The European driver Toshiba page provides BIOS for Vista 32-bit and 64-bit OS.
  But this does not mean that you cannot use the Win XP

  I think you can use the Win XP but the fact is that the BIOS has been optimized for Vista and not XP

  The BIOS update should work also on XP, but in some rare cases the update cannot be performed and in this case, you will need to the Toshiba preinstalled the operating system in order to update the BIOS