Qosmio F750 - 3D is 3D (Win8) mode

Similar Questions

• Qosmio F750-10N - question on 2D and 3D display modes

  Hello

  I recently bought a Toshiba Qosmio F750 10N and it seems that she has two display cards and can support different resolutions in 3D and 2D mode.

  Is anyone aware of how go in 2D only mode to access a slightly higher resolution to 1366 x 768 capable 3D mode? None of the software control panels seem to be able to switch to 2D only mode in order to access a higher resolution.

  Of the product - the following internal video modes are supported: resolution: 2D mode: 1920 x 1080, 3D mode: equivalent to 1366 x 768

  Look forward to any assistance.

  Concerning

  Post edited by: neural

  Hello

  I agree with Akuma.
  Go to display properties.

  Make a right click on the desktop allows you to change the theme and the resolution of the screen.
  You can also click the Customize option after right clicking on the desktop and in the lower left corner, click on the option called display.
  You will find the ability to change the resolution.

  Notes; the 1 920 x 1080 is only available in 2D mode.

• Qosmio-F750-10N and Win8.1 - were not able to get the right BT drivers

  Hello

  Since upgrading my HARD drive and installing Windows 8 (.1), I was not able to get the right drivers for my Qosmio F750-10N Bluetooth.

  If I go through the section of drivers download site, the drop-down boxes of language and the region appear to be defective, so it shows me all the drivers.

  Tried to install a Toshiba Bluetooth stack generic but it doesn't seem to be able to recognize my Bluetooth device. Also tried to go through the Atheros website without much luck.

  Please could someone help or maybe post a link to a download mirror.

  Thank you very much.

  Hello

  First of all, it seems that the 8.1 win is not supported for Qosmio F750.
  So I might be difficult to operate BT

  However, AFAIK the Qosmio F750-10N was equipped with an Atheros AR9285 Wifi/BT card.

  This means that a single module shares the WiFi network and BT and you need to install the Atheros BT filter driver.
  Next to the BT filter installed, must install the driver of Toshiba system to win 8.1
  The pilot of this system must be installed before the filter of BT driver.

  But like I said: 8.1 win is not supported for this Qosmio unit and you won't find drivers Win 8.1 download section in the driver F750.

  But you should try the drivers released for the other, more recent Qosmio series; i.e. X 870

  Good luck

• Qosmio F750 - touch buttons does not work after Windows update 10

  I use a laptop Qosmio F750 (PQF75A-02Y00Q).

  Installed on the computer the previous operating system was Windows 7 Home Premium 64-bit. Then, I upgraded the operating system to Windows 64-bit edition 10.

  As expected, this change would cause problems to appear. The thing that is really bothers me right now is that the touch of the keys in the top right of the keyboard do not work as expected.

  The buttons respond always if you touch them, but they do nothing on the screen. for the most part. When I touch the Volume Up / Volume keys down, they work as expected. However, the key Mute, the button Play/Pause, the Wifi key on / off and Mode (as well as the key to toshiba bulletin board) eco button do nothing.

  Curiously, when I manually turn eco mode from the power settings mode eco button again turns the green.

  My last question is, how can I fix this so that ALL keys work as expected?
  
  -----------------------------------------------------------------------------------------------------------------

  I noticed that the recognition facial webcam was funny things as well, but everything what needed to be done was to recalibrate the installation for that to make it work again.
  Curiously, all the FN key functions work well.

  In addition to the question in bold, there are all the other drivers should I install to improve/restore functionality to my laptop? As the page of Windows 8?

  Hello

  I have the same problem since update 8.1 and now after 10 update, even more I lost the 3d display function since I updated to 8.1.
  MY QOSMIO is PQF75E-F750

• Qosmio F750 - glass free 3D 3D non-active

  I changed HD, first with the last drivers I could activate 1080 p 3d games I saw them in 3D.

  now I've changed my hd, I installed the drive recovery
  I installed the same driver version

  The nvidia control panel active 3D

  3D game does not start

  NVIDIA 3d test does not start 3D

  Xtune see 3D test

  Hello

  I guess you can adjust track settings by using the X-Tune: software.

  Here are the step by step instructions:
  [SuperD software X-Tune to adjust the 3D effect on the Qosmio F750 | http://aps2.toshiba-tro.de/kb0/TSB1C038D0000R01.htm]

  In addition to 3D games support (supported only in mode full screen resolution 1920 x 1080) on the Qosmio F750 4 following updates must be installed:
  (V8.17.12.9039 or later) NVIDIA display driver
  Super-D IC driver (V1.0.1613.809 or later)
  TOSHIBA drive Blu - ray (V1.01.299 or later)
  BIOS (V2.00 or later version)

  Please visit our driver download portal and select the corresponding model of laptop. Download and install the above updates. You can also update will be distributed via the Toshiba Service Station.

  _Source: _
  [Support for glasses free 3D mode for games on the Qosmio F750 | http://aps2.toshiba-tro.de/kb0/TSB1C038G0000R01.htm]

• Qosmio F750 - how to change the graphics memory dedicated to 2 GB...

  In order to get my Qosmio F750 ready to run some games, I've updated all the drivers on via the toshiba Web site and the NVIDIA site also the software downloading. This includes upgrading the BIOS to version 2.00.

  According to the [laptop specifications given on the Toshiba site | http://www.mytoshiba.com.au/products/computers/qosmio/f750/pqf75a-02y00q/specifications].

  I should have the following allocation of memory for the graphics:
  "4095 MB Total: 2048 MB of memory dedicated + 2047 MB shared memory.

  When I check the window Information on the performance and tools, I'm getting shows the following information:

  Graphics
  --------------------------------------------------------------------------------

  Display type card Intel(r) HD Graphics 3000
  Total available graphics memory: 1 696 MB
  Dedicated graphics memory: 64 MB
  Dedicated system memory: 0 MB
  Shared system memory: 1632 MB
  Display adapter driver version: 9.18.13.1422
  The primary monitor resolution: 1366 x 768
  DirectX version: DirectX 10

  Of course, when I look at the specifications of the laptop, I realize that the current graphic memory allocation matches the economy power Mode i.e. allocation of graphics when running on battery

  Normally, it would be nice, however, I don't see any change in the displayed info even when I'm running on current alternative.
  I checked all my power settings, but even when everything is set to "performance mode", the information displayed is the same.
  I try to look in the system bios to change manually the graphical distribution but none this option doesn't exist. Rather all options are defined in performance mode...

  So my final question is, * how can I change memory allocation performance mode graph as it is stated in the specifications of the system? *
  Is this something that happens automatically without changing the displayed Info?
  Is there a driver that I forgot to update? An update of the driver caused cela?
  A BIOS update caused this?

  On a side note, the audit of the DirectX Diagnostic tool, I have the version of directx is displayed as version 11. So I thought that the problem was with the displayed information. But even on the Diagnostic tool gives me the same information.

  I would be very grateful if someone could help me with this.

  Thank you
  Jean-Pierre

  Hello

  This is controlled automatically by the graphics driver.
  If the application that is running would require more RAM (IE game), the graphics card would control this value and I would add some of the memory to the memory of the graphics card.

• Programming to stereoscopic 3D on Qosmio F750 11U (free 3D glasses)

  Hi people,
  I love the new material, have had a good day, install all the drivers and the wonderful
  tool of
  [http://coxcoppes.nl/3DScreenActivator]
  but have not yet discovered how to see demos of 3D software.
  Blu - Ray run usually in 3D after I fiddled with the controls of the Toshiba Blu - Ray player.

  My question: How can I program it using the * JavaFX, c# & WPF * or * Java3D * so that I see the image with depth?
  I tried various JavaFX 2 demos, but none appeared "miraculously" with depth, even when I use the 3DScreenActivator.

  Thank you very much
  and I would be interested in communicating with everyone who's going in that direction, or wants to.

  > How can I program it using JavaFX, c# & WPF or same Java3D so that I see the image with depth?

  I don't think it's a good place for this theme, here you can find common users of Toshiba and not 3D programmers and experts.

  But I found this doc from Toshiba:
  + Qosmio F750 portable free glasses 3D - content taken in charge and software +.
  http://APS2.toshiba-tro.de/KB0/TSB1A037N0000R01.htm

  glasses free 3D games is already supported, but some updates are needed:
  + Support of glasses free 3D mode for games on the Qosmio F750 +.
  http://APS2.toshiba-tro.de/KB0/TSB1C038G0000R01.htm

• Qosmio F750-11v - problem reading Blu - Ray 2d - 3d conversion

  Hello.

  Can anyone help please?

  I have a laptop Qosmio F750-11v 3d and although I can use the disk drive Toshiba Blu - Ray to convert standard DVDs to play in 3d using the 2d - 3d conversion tool integrated in the drive and they work great and also appreciate and understand that I can not reading Blu - Ray DVD and convert them using the same way 2d - 3d conversion tool. May I ask why, when I bought the New Avengers 3d Blu - Ray Disc I don't see it 3D even when I activated the drive on the "3d method" tab and active the check box for "turn on 3d Blu - Ray disc mode"?

  The software of face recognition using webcam of the tracks OK.
  I get an error message when you try to play the disc 3d does not recognize that a 3d Blu - Ray player is being used or that I have a computer 3d?
  All my drivers are up to date etc.

  Why can I not see a true 3d images generated on my pc drive?

  Confused?

  Al.

  Hello

  AFAIK you can use Toshiba video player for playback of DVDs and video files.
  But NOT Blu - ray discs!
  To read disc blue ray, you need to use the WinDVD BD for Toshiba, is another tool installed on the laptop.

  But beware: ONLY Toshiba video player supports converting 2D to 3D

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• Question about 3D games on Qosmio F750 - 1013 X

  Hello

  Now that I look at 3D movies work very well for me... I think try 3D games.

  First of all... in order for me to play games in 3D, what I buy labeled games like 3D games or component of Nividia in the laptop can kind of convert all 3D games?

  Can someone guide me through the steps to play a 3D game?
  Examples of games that I can play 3D?

  See you soon!

  Hello

  Please take a look here.
  + Support of glasses free 3D mode for games on the Qosmio F750 +.
  http://APS2.toshiba-tro.de/KB0/TSB1C038G0000R01.htm

• Qosmio F750-030 - the fan noise so that the closing

  I purchased a Qosmio F750-030 in September 2011 for the first weeks, it worked perfectly, but after a few weeks the fan has started to make noises when she stops.
  Looks like a jet and it is really very strong. I don't a not to worry about this at first. But generally, it runs at 50-55% now, whenever I try to do more than one thing about it, he climbs up to 70% and starting to make the same noise.

  I put it on the Eco mode which prevents him from jump that high. But now I'm starting to worry about all the noise it makes when it stops. I stopped to use it as well because of this, but it's just a waste since I paid a lot for it, it's still under warranty, but I wanted to know if anyone has any ideas why it would do this or I'm better off just ringtone Toshiba and see if they can fix it.

  I understand the CPU needs to cool down but I had a lot of laptops and it is the first which makes kind
  Noise?

  Please help me any suggestions would be very grateful.

  Please change the parameters for the method of optimized cooling battery. This option can be found in the advanced power options > Toshiba power saver.
  This will reduce the cooling fan activity and your laptop will run quietly.

  When the laptop turns off all background processes should be stopped. In this case the laptop runs faster and it is not uncommon that cooling fan runs faster. I assume that you have installed additional software that runs in the background and it is the reason why you didn t hear cooling fan in the past.
  Believe me there is no reason to panic.

• Qosmio F750 - some keys on the keyboard stoped working

  Hello

  Since 3 months ago, I have a Toshiba Qosmio F750. The other day, I have just the laptop powered and noticed some keys (a, b, n, enter...) didn't work at all. I tried to clean blowing under the keyboard and nothing. In the windows start these keys do not work. Anyone with the same problem?

  Someone knows how to fix this?
  Is quite annoying to have to use an external keyboard with a laptop 3 month old...

  Thank you!

  The same happens when you use the operating system in safe mode?

• Qosmio F750 - 12 p / BD - RW Pioneer BDR-TD04A - Bluray discs will not play

  Qosmio F750 - 12 p
  BD - RW Pioneer BDR-TD04A
  Windows 7 Home Premium

  Problem: Bluray discs will not play. CD will play.

  History: I did a clean install of Windows 7 and then installed 60 all the drivers from the support site for this laptop model. Or at least those that would install. Interestingly, the driver of Toshiba Bluray would not install. the installation process stated "player not found on your system" or something like that.

  What works the device currently is a 2006 (?) Microsoft driver.

  Clues? It's the second Toshiba laptop, I had to (second-hand), and they both had this problem: DVD players do not play DVD right from the start. Very annoying.

  Update:

  The "Bluray driver" mentioned above is just the own DVD from Toshiba software. It is not a driver. And it does not find the optical drive Bluray on my laptop!

  - The Bluray optical drive will play DVDs, but not of Bluray discs. I'll borrow an another DVD Bluray at the local library, to ensure that it is not a disk failure.

  -The Wifi does not work ("network controller driver is bad / missing")

  - I probably deleted the hidden partition that contains the Toshiba "system recovery disk". I have re-installed Windows and written too. [You are supposed to press "0" when the power, but it does not show the Toshiba Recovery console. I scoured the hidden with a freeware Windows partition and there is nothing usable here.]

  It is a stupid economy, not providing a system restore disk AND do not provide drivers download work. (The drivers offered on the site are simply updated). It makes the laptop value much less long term and creates bad word-of-mouth over time.

  The only station I have is to buy a Blu - Ray external drive and perhaps a Wifi dongle. Crazy.

• I can't install driver on my Qosmio F750-110 wireless

  My qosmio F750-110 has win7 home edition (64) but I have them upgraded to windows 8.1 but I wasn't happy so I desided to them downgraded to win7 profesional (64) and I put all the only drivers.the I can't get it market is the driver for wirelles and I don't know what to do.i tried to download tha driver drivers here but nothing happens.

  Please help me

  According to specification for laptop, your laptop Qosmio has Atheros WLAN + BT card inside.
  I do not know what you have installed and what is the status of the drivers in Device Manager, but all the drivers, tools and utilities that you can download driver Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp or portal Toshiba WLAN - http://aps2.toshiba-tro.de/wlan/

  When everything is installed properly you can use the WLAN connection when the wireless network adapter is correctly enabled and it can be done by using the FN + F8 key combination. It works for you?

• Qosmio F750: Toshiba Blu Ray Disc Player does not play videos in 3D

  Hallo,

  I had to re set my PC and installed then drive Blu Ray Disc tosbiha and also Super D and XTune.
  Also also made installation with xtune.

  So now, I'm trying to watch a 3D movie it is not possible to play, the system displays only 2 parallel pictures.
  In the player, Miss me the 3D icon.

  I also installed Caberlink Power DVd V13. But here also no 3D film is projected...

  Does anyone know how to enable 3D in Toshiba Player or how Cyberlink Power DVD to work with this laptop...

  Thank you

  > If I try now to watch a 3D movie, it is not possible to play, the system shows only 2 parallel pictures.
  > In the player, Miss me the 3D icon.

  See this Toshiba document:
  [3D video content not displayed in 3D when you use the disc drive Blu - ray Toshiba on the Qosmio F750 | http://aps2.toshiba-tro.de/kb0/TSB1C038C0000R01.htm]