BlackBerry Smartphones Blackberry Dead - water damage - data recovery is not possible?

Similar Questions

• Broken screen - data recovery is not possible?

  Hi all

  I have a RAZR Maxx HD with a digitizer of cracking, the screen is not visible at all. Is it possible to connect it to my laptop to extract data before that I have to send it back (since I already have the insurance replacement)?

  I know there are mirror screen programs out there, but they all need developer and debug USB mode to be marketed. I do not have access to a HD screen, otherwise I would use micro-HD cable and a mouse.

  Difficult situation, but I'm open to suggestions! Thank you!

  Do you know someone who has a Lapdock? Lapdocks do not work real well with the series of HD, but work well enough for your application. Except that I don't have really any suggestions. No no not the USB debugging checked really keeps you return to use ADB as well. Wish I could help you more.

• VMWare Data Recovery does not properly

  Hello

  I use VMWare (VDR 2.0 - with Vsphere 5) data recovery tool. I'm tempted to save a virtual machine and the VDR said the backup was successful. But I can't restore the virtual computer. When I checked the log, I found that the vmdk is not saved.

  26/07/2012 10:22:31: normal backup using Backup1
  26/07/2012 10:23:18: created snapshot '_datarecovery_ '.
  26/07/2012 10:23:19: copy "vm1' destined ' / MNT /.
  26/07/2012 10:23:19: independent labels 'vm-153. "[datastore1] vm1/vm1.vmdk ' is not saved
  26/07/2012 10:24:13: deleted snapshot '_datarecovery_ '.
  26/07/2012 10:24:14: task completed successfully
  26/07/2012 10:24:14: finished: 3 files, 26KO
  26/07/2012 10:24:14: performance: 0.1 MB/minute
  26/07/2012 10:24:14: duration: 00:01:43 (00:00:48 idle/load/preparation)

  I use the default backup device provided with the VDR. (Cent OS 5.5). I backup virtual machines on a NFS mounted in this machine (VDR) centos.

  Can someone help me understand the problem? any help would be appreciated.

  Newspapers say it all: "26/07/2012 10:23:19: independent labels 'vm-153." "" [datastore1] vm1/vm1.vmdk "unsaved."

  This VMDK is configured as independent VMDK, independently discs are "made not snapshot ' type of drives and because of this VDR will not back up these disks.

  First of all you need to know why this drive is configured as apolitical, apolitical fashion isn't really necessary then stop VM and remove "Apolitical" mode option of this hard drive in the hardware configuration of the VM.

• Satellite A660 - 11 M - drive HARD recovery is not possible

  Hello.

  I bought the satellite A660 - 11 M two months ago. A week before, he started to cause a problem that when turned on, boot HARD drive is not possible in the first place and boot priority option page is shown. Only after that I have reset a start command, it started.

  To resolve this issue for good, I decided to format the HARD drive using the HDD recovery procedure. Unfortunately, I had to cancel this procedure after 2 minutes, and the start-up is not possible at all since then. He continues to display the message "Boot failure" etc. and staging to the BIOS screen. So, I can not access the recovery procedure even if I keep the F8 key. I am afraid that a recovery on the HARD drive partition can have been damaged due to the forced cancellation.

  I have not created a DVD of my own laptop recovery, and the only option seems to buy one from Toshiba (https://backupmedia.toshiba.eu/landing.aspx). Before you order a recovery disc, I would ask if my problem can be solved using the disc. Anyone who has experience with the recovery disc could advise me? Another question is to know if a standard warranty let me send to Toshiba ASP? Thank you for reading.

  Hello

  > Another question is to know if a standard warranty let me send to Toshiba ASP?
  Warranty only covers hardware issues.

  Question you seems to be related to a software problem.
  Therefore, I doubt that installation of the OS would be covered by the warranty.
  You should order the recovery disk and must attempt to define the notebook back to factory settings.
  Then you should check the features of the laptop.

  Good luck

• Smartphones blackBerry torch water damage

  My flashlight accidentally fall into the water. I just removed the battery immediately. After awhile, I inserted the battery and the phone worked fine. The very next day evening the LED started to blink twice with an interval of two seconds. It not swicthing on. ThenIdisassembleditandblownhotair, thn I assembled it. Butinvain.

  REMOVE THE BATTERY FROM YOUR BB NOW!

  Run, don't walk, to this FAQ:

  • http://http :// www.ehow.com/how_7307294_dry-out-blackberry-rice.html

  Do what it says, including the maximum recommended wait time (or even more for a long time... maybe 5 days). Marketing your BB between her getting wet and do this process reduces the chances of success. In addition, the only predictable thing in the intrusion of moisture in a BB (indeed, any electronic device) is that the results will be unpredictable. I've seen some return immediately and be well. I have seen that others do not work. I've seen more a little run and then die later. And every thing in between.

  Good luck!

• SDS data recovery drive not question

  Hello

  Posted yesterday on how to transfer my data from my SDD on my MBP and gave some indications on how to use a disk utility and the external drive. Can someone update it please?

  TIA

  Disk utility can only clone your SSD on an external drive, if that's what you want to do. If you want to copy some files using Drag and Drop.

  Clone El Capitan on a new disc

  1. Restart the computer. Immediately after the chime, press Command - R until the Apple logo and progress bar appear.
  2. When the Utility Menu appears, select disk utility and click on the continue button.
  3. Loading disk utility, select the disk (usually, the entrance Out-bumpy) in the list aside.
  4. Click the Partition tab in the main window of disk utility. A panel will fall.
  5. Set the GUID partition scheme.
  6. Define the type of Format Mac OS extended (journaled).
  7. Click on the apply button, then click the fact when it is active.
  8. Select the new Seagate drive and then restore in the edict of disk utility menu.
  9. In the drop-down list, select the volume you want to clone.
  10. Click apply to start the process.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

• BASIC data recovery, does not

  Greetings,
  I'm going out of my mind in this one. I have a problem with the help of httpservice:
  
  I can have mangled the code of tweaking and tweaking more, trying to get him back to what either. I usually end up 'result' as string.
  
  I have another part of the application is using the remote object and it returns the data, so I'm assuming that the server is configured correctly. I was originally with cfreturn, then cfxml, then I just pasted a generic xml on the page and tried to get it back. Page of cold fusion, with the XML control, kick off a debugging email so I know that it goes to the page I can't get all the data.
  
  Any suggestions would be greatly appreciated!
  Thank you
  -Kevin
  
  
  
  

  Firstly, it is wrong:
  SearchResult = ResultEvent.RESULT;
  'ResultEvent.RESULT' is a constant, not the property that contains the data. You want to:
  SearchResult = event.result;

  "Then set HTTPService.resultFormat ='e4x '. You do not want the default resultFormat ="object", unless you are sure that you do and you know why.

  [Bindable]
  public var _xmlSearchResult:XML;

  Then in the Manager to:
  public void httpResult(event:ResultEvent):void {}
  _xmlSearchResult = XML (event);
  Alert.Show (_xmlSearchResult.ToXmlString ()); You must enable tracing for debugging. Alert can cause focus problems.

  Tracy

• Qosmio X 500 - 10V - 300MBit WLan data transmission is not possible

  Jin

  I only am not able to get the 5 = 300MBit to the Wlan. I have only the 2.4 MHz (150 Mbps) connection. It is a netgear 3700. With the old Satellite P100, I get the signal, and it is possible to connect the signal of 5G.

  The same I get with my plant-laptop - it is also possible.

  How can I get the 5G connection?

  Greatings
  Jim

  Hello

  What should I say? First of all try to update the driver WLAN. So check the download page for the driver Toshiba for your Qosmio X 500.

  After that, I would recommend updating BIOS if you can find a newer version.
  Check it!

  Also, make sure that the WLAN energy saving is disabled in Windows Power Management.

  Sorry, but everything that s what I can say at the moment.

• Pavilion p6537c: Dead Win 7 C drive, should I go direct to 10 for a new disk? Ideas on data recovery?

  Question: Installing an operating system on the new replacement drive:

  750 GB hard drive on my Win 7 Home Premium desktop is completely dead. [See data recovery? below.] With regard to the new replacement unit 1 TB, I don't have recovery discs (my bad) and can get a USB bootable HP for $30 in 5 days.  But if I will Windows 10 in any case, would it not easier to simply direct that, assuming that I can download from the MS site?  Is this possible or do I have a valid Windows installed before 'upgrade '?  I have the serial number of windows etc. since it is a 64-bit licensed machine Win 7 legit bought new at HP.  There cpu: AMD Phenom II X 4 830 (D) 2.8 GHz and 6 Gig of RAM. Tips appreciated!

  DATA RECOVERY question: C drive would not start at all in a local computer store and they refer only to the people of data recovery. Any ideas how I could do this, or at least try, me? Otherwise, any suggestions on the most cost-effective way to get what I can (if any) out of the disc?  I don't have an idea as to why/how it has failed or the status of the Board at this point.

  Thank you very much!!

  Tommy

  From W10 v1511 that you do not have to enter a key when it is stored in the bios, W10 will find that during the installation, so you can just go right to the 10 and spend 8 installation.

  Even if it is not stored in the bios, you can enter a product key valid W7 orW8 during installation of W10 and he will accept it.

• Data recovery is running indefinitivly

  Hello

  running VMWare Vcenter 5.0.

  When you enter data store manager Equallogic under VSphere client (V5.0), on the left column, the name of my Vcenter, and normally, under the present it seems the cluster, then the data store; but it only shows "data recovery" and not going anymore.

  So I run VSphere Client from another PC, and it worked because the same problem occur.

  What's wrong?

  Thank you to.

  Kind regards.

  Fred.

  I had the same problem & wrote a blog about it. It will be useful.

  http://patrickhoban.WordPress.com/2012/09/28/0815-2

  Kind regards

  Patrick Hoban

  http://patrickhoban.WordPress.com

• your processor does not support long mode. use a 32-bit Vmware Data Recovery distribution

  Hi all

  When I tried to start VM in Vmware Data recovery, her gives me error as

  "your cpu does not support long mode. use a 32-bit distribution"

  I tried searching for the 32-bit version of data recovery, but not able to find out.

  Help, please

  Kind regards

  Selim Desai

  You can add a 64-bit host to a virtualized session of ESXi. The ability of VT is not transmitted to a guest operating system.

• Smartphones blackBerry water damage: repairable?

  Here's my situation: since my battery would lose all fees within minutes being disconnected from the charger, I leave my Blackberry Curve 8530 permanently connected. I left a small amount of Koolaid without sugar (sugar-free doesn't mean no corrosion... right?) next to my bed, unfortunately also next to my phone, and I took a NAP.

  Now, unfortunately for me, I won't stay again in my sleep. So when I woke up, I saw my drink had been knocked down, and my phone has been soaked. I have no idea how long the phone had been soaked, and my phone is powered when it happened. The Blackberry in an Otterbox, but the compartment was still wet. The sticker in the battery water damage is bright red, and the one on the battery itself is pinkish.

  Given all this, is the repairable damage, or are all gone for good contacts? I dried my phone out and tried the rice thing, but the phone will power is no longer completely over... the red LED lights up for a few seconds and the keyboard lights up, but then it fades a little, and the screen never lights.

  Hello and welcome to the community!

  Depending on how you actually did 'rice thing', you may or may not have completed it. Because the instructions say leave it in rice, WITHOUT CONTACT WITH HER, for 3 to 5 DAYS, I suspect that you have not fully completed the process.

  The only thing that is predictable in the intrusion of moisture in a BB, it's that the results will be unpredictable. I heard about people who a BB was totally soaked for awhile to get this back to life to the rice trick. I heard about people who got a BB only a small amount of moisture never come back to life no matter what happens. I've heard everything between the two institutions. It is therefore impossible to predict the outcome of your specific situation.

  But, the more times you try to bring it to life before he had the full time in the rice for really dry, less is always coming back to life. Since you clearly already tried at least once before you fill out correctly the thing of the rice, the probability of coming back to life already declined.

  Good luck!

• BlackBerry Smartphones water damaged phone has bad signal

  My 9790 "BOLD" age of 6 months of BB washed. I had fixed and everything worked perfectly, except for the bad signal (most of the non-existent time)! I never had problems before water damage. Now I have to put my phone on specific points, the specific angles and then only, it will pick up signal with maximum 3 stripes. If anyone phones, I can't talk to them, cause now I pick up the phone, the signal goes into SOS mode or network research. I brought back to the guy who fixed it, and it replaced the ariel, without success. Any other suggestions? I still have the contract of 15 months left!

  Physical repairs are problematic, especially on a device that has been damaged by water, you never know if indeed you have solved all the problems caused by moisture or water. And dried water in a device may leave behind the salts and minerals on the circuit, which can cause problems six months later and are not detectable today.

  You might be better to start with a new device.

• BlackBerry smartphone how to recover lost data from blackberry phone?

  Hello, I deleted some photos on my Blackberry phone, how do I get back them? I have no backup!

  Jackrouslly wrote:

  What data recovery app will be working with me?  Please recommend some, thanks!

  If you use Blackberry Priv, you can try some android data recovery app, which you can find similar applications on Play store and google. I am currently using it, which has helped me recover deleted contacts and text messages. You can have a try: http://www.androidphonesoft.com/resources/recover-lost-contacts-from-android-phone.html

• Corrupted data recovery water Iphone 6

  We know anyway to get data of an Iphone that does not turn on?

  I am desperate to get my photos from my broken phone and a loan to pay for it, but I do not know if everyone can do?

  The photos I want are not saved on icloud to bring from the phone itself are the only way.

  However, it was damaged more than a month there are water and did not put in operation since

  Thank you

  The bottom line is not. You can pay a ton of money for a service of data recovery, but it is useless with the encryption using the iOS and the iPhone with your data. All what they will recover is meaningless strings of gibberish, not files and with no way to decipher gibberish it's worthless.

  Sorry, but that the data is finished now.