Qosmio F750-030 - the fan noise so that the closing

Similar Questions

• Qosmio-F750-120 makes wired noise

  Hello

  I purchased a Qosmio F750-120 3 weeks and it has a problem that I have can´t fix.
  At random times (and increased when using more memory) jams for a second or two, making a strange noise.

  What can be?

  Thanks in advance.

  I think this is related to the overloading of the system.
  Perhaps this noise appears if running applications stresses the CPU. In this case, you may notice a short interruption.

• Qosmio F750 - some keys on the keyboard stoped working

  Hello

  Since 3 months ago, I have a Toshiba Qosmio F750. The other day, I have just the laptop powered and noticed some keys (a, b, n, enter...) didn't work at all. I tried to clean blowing under the keyboard and nothing. In the windows start these keys do not work. Anyone with the same problem?

  Someone knows how to fix this?
  Is quite annoying to have to use an external keyboard with a laptop 3 month old...

  Thank you!

  The same happens when you use the operating system in safe mode?

• How to watch 3D without glasses on Qosmio F750-11R?

  Hello, I know that this question has been asked many times before, however, I can't seem to find a useful answer (related to my laptop series) anywhere.

  Most of the time the answer is to re - install the X-tunes already pre-installed.
  It is not preinstalled. I updated all the drivers and downloaded all of the proposed programmes.

  It doesn't always seem to work.
  I can convert something in 3d, but then it shows just the screen twice vertically.
  I thought that this should be easy (as suggested by the ads and the very useful note packed with the laptop). I'm not a computer genius, but it shouldn't be this hard?

  Can someone please explain to me how to do this?
  In addition to the 3d dvd I would like to play MP4 and. AVI files as well.

  Thank you!

  Hello

  > How to watch 3D without glasses on Qosmio F750-11R?

  First of all its imporntat to know if your Qosmio F750 is equipped with a 15.6 LCD FHD GLASSES FREE 3D.

  Only F750 units with a glasses free 3D LCD supports 3D without extra 3D glasses.

  Find the plug on the page of Toshiba for the Qosmio F750-11R and unfortunately, it seems that the laptop does NOT support free glasses 3D display.
  http://nl.computers.Toshiba-Europe.com/innovation/product/Qosmio-F750-11R/1115695/toshibaShop/false/

  This is also the reason why the X-tune software was not preinstalled on your laptop

• Fan noise after changing graphics - Qosmio F10-101

  Two months ago, I had my graphics from nvidia fx 5700 for nvidia geforce go 6600.
  Since my computer toshiba qosmio f10-101. After changing the old graphics card there is a fan noise that starts and stops every 2 minutes, it makes me crazy whenever I'm hear.

  Can someone tell me if this is normal and if they know if the specific card is noisy in any laptop? or if there are ways to remove this noise or to maximize the speed of the noise. ??

  Post edited by: marlena

  Hello Marlena

  The Qosmio forum, you can find some similar topics with some interesting comments. On the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10944&messageID=42103

  Good bye

• Qosmio F750 - how to disable the user locking after the closure of the laptop?

  Hello

  I have a Qosmio laptop, F750 and I would keep it active after the closing of the screen keyboard. At the time you close the screen that the user is locked and my remote via WiFi connection does not recognize the laptop is ON more.

  I use iTunes with their Remote app to control music on the laptop and want to have the laptop running in the background with the display closed, but as soon as I do this I lose the connection.
  I disabled the hibernation in the power settings, but this only works if the screen remains open.

  Any help would be appreciated.
  Thank you

  Which is really strange.
  When you open the power settings in the Panel on the left side you will find the option choose closing the cover. Set it to do nothing and to test it.

  > and want to have the laptop running in the background with the display closed
  Why? Leave it open. The key is that the screen is off and you can assign parameters of energy too.

• Qosmio F750 - how to change the graphics memory dedicated to 2 GB...

  In order to get my Qosmio F750 ready to run some games, I've updated all the drivers on via the toshiba Web site and the NVIDIA site also the software downloading. This includes upgrading the BIOS to version 2.00.

  According to the [laptop specifications given on the Toshiba site | http://www.mytoshiba.com.au/products/computers/qosmio/f750/pqf75a-02y00q/specifications].

  I should have the following allocation of memory for the graphics:
  "4095 MB Total: 2048 MB of memory dedicated + 2047 MB shared memory.

  When I check the window Information on the performance and tools, I'm getting shows the following information:

  Graphics
  --------------------------------------------------------------------------------

  Display type card Intel(r) HD Graphics 3000
  Total available graphics memory: 1 696 MB
  Dedicated graphics memory: 64 MB
  Dedicated system memory: 0 MB
  Shared system memory: 1632 MB
  Display adapter driver version: 9.18.13.1422
  The primary monitor resolution: 1366 x 768
  DirectX version: DirectX 10

  Of course, when I look at the specifications of the laptop, I realize that the current graphic memory allocation matches the economy power Mode i.e. allocation of graphics when running on battery

  Normally, it would be nice, however, I don't see any change in the displayed info even when I'm running on current alternative.
  I checked all my power settings, but even when everything is set to "performance mode", the information displayed is the same.
  I try to look in the system bios to change manually the graphical distribution but none this option doesn't exist. Rather all options are defined in performance mode...

  So my final question is, * how can I change memory allocation performance mode graph as it is stated in the specifications of the system? *
  Is this something that happens automatically without changing the displayed Info?
  Is there a driver that I forgot to update? An update of the driver caused cela?
  A BIOS update caused this?

  On a side note, the audit of the DirectX Diagnostic tool, I have the version of directx is displayed as version 11. So I thought that the problem was with the displayed information. But even on the Diagnostic tool gives me the same information.

  I would be very grateful if someone could help me with this.

  Thank you
  Jean-Pierre

  Hello

  This is controlled automatically by the graphics driver.
  If the application that is running would require more RAM (IE game), the graphics card would control this value and I would add some of the memory to the memory of the graphics card.

• BIOS update solved the Portege M400 fan noise

  The new version of BIOS (1.8) for Portege M400 solves the problem of fan noise. The Readme.txt explains that the temperature will rise only in three degrees. Very important, very recommended patch for users of M400.

  Now I can use my tablet in my business meetings without having to give explanations to customers of the fan noise.

  Greetings.

  Hello Jose

  It is very nice to hear that you are happy now. I read your previous assignments and I can understand you this annoying issue with cooling fan, but now you can see this laptop manufacturer is trying to make the product better, even if the product is on the market.

  I am also certain that customer s comments can help identify the problem if persist und after this systematic search for the solution or change for the better.

• Numlock stops working on the Qosmio F750

  Hello

  I have a Qosmio F750-11 t. Four days ago, I started my laptop and discovered my num lock stops working. The light still comes on, but the buttons do not respond. I can't turn the NumLock or off and I can ' t produce numbers more with him (or use the pgup pgdn buttons when it should be off).

  I have read a few things on the forum (.com) and updated the BIOS to the latest version, restarted it, but nothing works.

  I bought the laptop 3 months ago only. I would be grateful if someone could help me with this.

  Thank you!

  Post edited by: Tino.Bos

  Hmm, I would say that its dysfunction of the keyboard.
  You can use the Num Lock button using an external USB keyboard?

• Impossible to get free 3D glasses to work on the Qosmio F750

  Hello

  I tried to make it work on my Qosmio F750 without success. whenever I try to not calibrate the 3D using the face recognition, theres no poping window until the recognition of face, am I missing any driver?

  Hello

  Can you please post exact model laptop number?

  Usually the X-Tune: software must be pre-installed on a Qosmio F750.
  This software allows you to calibrate the 3D effect.
  http://APS2.toshiba-tro.de/KB0/TSB1C038D0000R01.htm

  Please be sure that Super-d Driver IC (V1.0.1613.809 or later) has been installed
  All these software and drivers should be available on the Toshiba driver page.

• Qosmio-F750-10N and Win8.1 - were not able to get the right BT drivers

  Hello

  Since upgrading my HARD drive and installing Windows 8 (.1), I was not able to get the right drivers for my Qosmio F750-10N Bluetooth.

  If I go through the section of drivers download site, the drop-down boxes of language and the region appear to be defective, so it shows me all the drivers.

  Tried to install a Toshiba Bluetooth stack generic but it doesn't seem to be able to recognize my Bluetooth device. Also tried to go through the Atheros website without much luck.

  Please could someone help or maybe post a link to a download mirror.

  Thank you very much.

  Hello

  First of all, it seems that the 8.1 win is not supported for Qosmio F750.
  So I might be difficult to operate BT

  However, AFAIK the Qosmio F750-10N was equipped with an Atheros AR9285 Wifi/BT card.

  This means that a single module shares the WiFi network and BT and you need to install the Atheros BT filter driver.
  Next to the BT filter installed, must install the driver of Toshiba system to win 8.1
  The pilot of this system must be installed before the filter of BT driver.

  But like I said: 8.1 win is not supported for this Qosmio unit and you won't find drivers Win 8.1 download section in the driver F750.

  But you should try the drivers released for the other, more recent Qosmio series; i.e. X 870

  Good luck

• Satellite L650 1NC - the fan noise

  I bought the laptop in February 2011 and the fan noise deteriorated over time, now. I've read many threads in this forum and elsewhere about this problem and I think that the problems are basically the same.

  Now that I've read some that messages stating that the new BIOS, released in September have apparently solved the problem, I did a BIOS update (Version 2.3) to meet the same problem again.

  The fan stops when the temperature is below a certain threshold, in my case according to CoreTemp it seems to be at about 50-55 ° C. At the moment the fan turns off, which is also confirmed by the monitor of health indicating the 0% fan speed.
  This leads to the CPU temperature increases until the fan is used to about 55-60% fanspeed.
  This process repeats every 15-20 seconds and is very annoying.

  It gets worse, but if I start to actually do something like a request to open from the web browser - nothing serious, really, I don't want to start even complain about the noise while game/watch movies.
  The fan speed will be 70-75% as soon as the CPU gets the work to be done.
  The noise that results is unacceptable for 20-30 seconds.

  Noise is an important factor for me. At the University I can't use it as my fellow students are too distracted by its noise. To work my colleagues began to complain as well.
  As I use my cell phone while being out of my own office/home it is basically useless for me now.

  Has anyone else still issues after the recent updates to the BIOS?
  Is there a way to put the fan always runs at around 30-40%?

  All opinions are appreciated.

  Hello

  Cooling module performance depend on the internal temperature.
  If the temperature arise at a higher level, the fan must turn more quickly to prevent equipment overheating it's usual behavior.

  But you can try to change some Windows 7 power management settings.
  This will reduce the performance of the CPU and the dissipation of the heat and that should slow down the activity of the fan too.

  Here is instruction how to change the Windows 7 power management.
  + How to manage Windows 7 power management features.
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  TOSHIBA Power Saver Settings options are interesting: cooling method and processor power management

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• It will never be a 3D for the Qosmio F750 update?

  Don't you think that it will always be an update for the use of 3D with games or other applications beside using Kevin screenmode and iz3D utility?

  I've heard rumors that Toshiba is planning something for the 4th quarter...

  > Do you think that it will always be an update for the use of 3D with games or other applications beside using Kevin utility screenmode and iz3D?

  + Qosmio F750 portable free glasses 3D - content taken in charge and software +.
  http://APS2.toshiba-tro.de/KB0/TSB1A037N0000R01.htm

  3D still images (planned to be supported)

• I've used folio 13-1007tu. The fan noise is a bit much!

  Is there something to do to reduce the fan noise.

  I already check the fan grille.

  I use that laptop with ms office and watch the video clip.

  I recommend you to update the latest version of the BIOS for your laptop support and driver download page on hp.com and navigate the document following that will help you reduce the FAN noise.

  http://support.HP.com/us-en/document/c01007591

  I hope this helps!