Qosmio G10-105 t - it work fully to the Canada?

Hello, I live in the Canada and I think to buy the Qosmio G10 Toshiba Europe. Is could someone please tell me if the computer will work correctly in the Canada. In addition, if there are problems would I be able to correct by the purchase of additional hardware to Toshiba Canada.

Hello

Can you tell me please why would you buy laptops from Toshiba Europe? Is there a reason for this?

Tags: Toshiba

Similar Questions

  • Qosmio G10-105: the screen is black

    I was asked to look at a Qosmio G10-105 by a friend who claims that it functioned very well until one day "the screen went black.

    It seems to start fine but there is absolutely no image on the screen with backlight, no and no image "Dim". The problem is that when I plug in an external display there is also no image at all however becomes the external display backlit, but that's all.

    Can I assume that this is neither the inverter, backlight screen or I get no image on an external display?

    Is it likely to be the graphics card? If so, is it replaceable or it is part of the motherboard?

    I tried 2 external displays

    Any help / ideas would be appreciated...

    Thank you
    Rob

    > Is it likely to be the graphics card? If so, is it replaceable or it is part of the motherboard?
    Hmm. It really looks like a graphics card problem
    It was a good idea to connect the external monitor to check if the same problem would appear on the second screen that there is a simpler way to find out if this problem could be linked to the TFT screen or the graphics card.

    The GPU chip set on the motherboard and in most cases (in your case too) the whole motherboard must be replaced :(

    Unfortunately, but it looks like an expensive affair :(

  • Tuner TV on Qosmio G10-105

    I just want to know when the TV tuner will be available for the G10-105 to the Portugal or if the the other Qosmios TV tuner fits on mine.

    Hello
    the best way to learn about this model is to contact a local Toshiba Service partner to the Portugal. They normally have information on the date of release of a model.

    Good bye

  • Qosmio G10-105: standard VGA need driver for Vista

    Hello

    I want software for standard VGA graphics adapt nVIDIA GeForce Go 6600 for Vista

    Please help me

    I put t know what you mean by software for standard VGA graphic card, but I guess you a looking for a driver for Vista graphics card.

    Unfortunately, Vista is not supported on the Qosmio G10 and F10 series and therefore a graphics driver doesn t exist on the driver page.

  • Qosmio G10: OS does not work properly (very slow)

    I have the same problem with the CPU. Pc slows down extremely, sometimes it's back to normal, but after a few seconds, it's like hell once again. I tried various OS (Win xp Home, Xp Pro and XP MCE) so far, but none of them does not solve the prob. I tried then to see if I can slow down the CPU manually, but that did not work, either. Kinda funny, because I had no probs virus, nothing.

    Actually I don't really know what I should do now.
    If there is anyone out there with the same problem, let me know, if all is well there is someone who has solved.
    Otherwise, I'll go with linux, maybe that's going to work.

    Anyway, please if anyone has good suggestions...

    Thanks in advance

    CU

    pistolpete

    Hello

    In my opinion, you should install OS using recovery media. The image content designed Toshiba all drivers necessary, and it should works well. It has been tested and there should not be any problem. If the antivirus application is installed it can slow down the BONE quickly (as in my case).

    Like I said, the recovery DVDs to use for the installation of the OS and enjoy life.

    Good bye

  • Qosmio G10-105: need driver VGA standard

    Hello

    I want software for standard VGA graphics adapt nVIDIA GeForce Go 6600 for xp

    Please help me

    The graphics driver for this laptop can be found on the European driver Toshiba page!

  • Qosmio G10: DVD-R and DVD + RW are the CD when inserted

    When viewing my empty DVD drive via Windows Explorer, it displays "DVD - RAM drive".
    When I put a blank disc DVD-R or DVD + RW (brand new Phillips) in the drive, the description of the car immediately passes to 'CD player', and I only get audio options.

    I have never managed to write on a DVD from this machine. It is a completely standard generation, running XP Media Center.
    It will play all CDs and DVDs I've tried. It is supposed to write in all DVD formats.

    I've written on a CD without any problem previously - and (try to) DVD writing I disabled the "Enable CD writing on this automatic diaphragm.

    Can someone tell me what I need to do?

    Thank you very much...

    Hello

    I would say to change the AutoPlay settings in the properties of the CD/DVD drive. This option you will find in the AutoPlay tab.
    Here you can choose the blank CD of content type, then the action.

    Good bye

  • Qosmio G10-122: I can't find the Qosmio player

    I buy the qosmio g10-122, but I can't find the Qosmio player in Notepad.
    I need this software and I will download this Internet but I'm not sure this could work whith my laptop.

    Hi Adriano.

    Have you checked all the stuff that was delivered with your Qosmio? There the Qosmio player installation CD?

    QOSMIO player is already preinstalled on your laptop on a hidden partition. Check the user manual. There is a detailed description how it works exactly.

  • Qosmio G10: Question about motherboard replacement

    I bought the G10 around 2 years there are in the United Kingdom and who now live in New Zealand.

    I would say it has been a faithful companion, but looking back it cost much to get anything done, because of the ridiculous prices of the FSA.

    I experienced a power supply, two hard drives, my touch pad no longer works and now the GPU (graphics card) is dead.

    I'm sure that most of the people on this forum knows, that is, replacing the motherboard because it is on board.

    I am out of warranty and replacement cost is more than a qosmio second hand of the same age.

    Having done a lot of research on the internet about it.
    I found out that Toshiba US will free of charge replace the motherboard. I asked Toshiba AUS/NZ and they refused him, that it was not a problem.

    Toshiba UK/Europe does, or is it just the Toshiba US that cares about its customers?

    [Edited by: admin on 20-Sep-2007 07:11]

    Hello

    It's very sad to hear that! :(
    I want to share my knowledge on the Toshiba us and Europe.
    As I know the Toshiba us has nothing to do with Toshiba Europe or Australia/New Zealand.
    Portable computers designed for the American market are simply different and also supports different parts and numbers; for example the Qosmio G10 or G20 are not available in the United States but only the Qosmio G15 or G25, etc.

    If you have problems with your hardware, you must contact the partner service manager authorized in your country for further assistance.

    Regarding your question.
    Yes, it really looks like a malfunction of the GPU (graphic processor unit). This graphics chip is fixed on the plateau and in the majority of cases, the whole Board needs to be replaced!
    As you know, these hardware problems could still happen because the new age books are of the high-end products that work always with high performance.
    That s nothing unusual.

    I bought a year ago from G20 and I bought an extended warranty on avoid such troubles.
    So, I always recommend buying the extended warranty in the future.

    Good luck and best regards

  • Qosmio G10: Blue screen shot and later endless reboot

    Hello!

    I found similar topics on this problem, but they were locked and left unanswered.

    My problem is this: I have not changed of _anything_ in the BIOS for a log time. I have not installed new software or hardware lately. And I have not damaged my computer or anything like that. A few days ago I read a Web page when my computer turns off suddenly. It turned on automatically, then it asks me how to restart... count up to normal restart... the blue screen of death... restarts, wonder how... I choose "Safe Mode"... BSOD. I press F8 and try all possible options, but the result is always the same.

    A blue screen indicates: "MACHINE_CHECK_EXCEPTION" or something like that. I'll send more information about blue screens later and more machine ID.

    If someone has any idea what happed and how this could be fixed, do not hesitate to write.

    I can't access Windows and I won't use CD recovery (yet) because I need to save some data to the HARD drive first.

    I say it's all simply amazing. Graphics card a year ago broke down (blue/green vertical lines, fans are going full throttle) and now this! This is the 2nd time in two years when Qosmio brokes suddenly.

    Post edited by: ADMIN

    Ok. Here's some additional context information.

    My laptop Qosmio G10-105, model PQG10E-01D016FSR. After disassembly I was not able to access the windows more - not again. Several times that I managed to get into SafeMode so far, I was able to see the text "Safe mode" in every corner of the Welcome screen, but then it crashes. Once or twice the same in normal mode, Windows on the Welcome screen appears, but then it crashes immediately. In these crashes, blue screen says "MACHINE_CHECK_EXCEPTION" or 'PFN_LIST_CORRUPT' and landfills fysical memory on disk.

    If she does not get there and computer falls down at the beginning (even if the Windows loading screen) it restarts all computer instantly. Sometimes, he does not screen blue but says the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. This error can appear four or five times in a row then it tries to start normally, but blue screen crashes again.

    I can't find any logic in the accident, nor a way to avoid. It seems that various errors appear randomly. I would like to know if it is a crash HARD drive or something else. Other information are also welcome.

  • Replacement card mother Qosmio G10

    After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:

    1. second HARD drive internal no more seen.
    2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
    3. always on cooling fan.

    Upgrade the motherboard consisted of:

    1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
    2. loading the CD-ROM TCN0000006 official update tool.
    3. no recovery BIOS or EC/KBC.

    Any idea?

    I m wondering how you did update the information in the DMI?
    As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.

    I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
    So maybe his bad card mother

  • Qosmio G10 - compatibility with video cards with VISTA BUSINESS

    THE VIDEO CARD IS NOT COMPATIBLE UND UPDATE THE MICROSFT HOME PAGE IS ALSO NOT OK
    PLEASE SEND ME AN UPDATE FOR TH QOSMIO G10 GRAFIK

    Hello Michael

    Qosmio G10 Vista capable laptop is? There the Vista capable label?

    http://support.toshiba-tro.de/KB0/TSB7101O80001R01.htm

  • Qosmio G10: problem with Port Monitor

    Hi all

    I have a Qosmio (G10), but I have a problem with the functions of 'Port Monitor-in '. However, I have connected my computer cassette player output ports "port monitor" with the proper cables and jack and get good sound but get no video.

    where I go wrong?

    Thanks in advance.

    Hello
    you need to go to "start / all programs/toshiba/utilities/photo Enhancement utility ' and then click 'monitor input parameters'"
    choose s-video and monitor-in.

    Good bye

  • Qosmio G10 begins with vertical lines on the screen

    Hello, can anyone help?

    When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
    In VGA mode, it begins upward, but always with the lines on the screen.
    Is there something wrong with the video card? In my view, that there are more people with this problem.
    Toshiba offered little help?

    I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

    Hello

    Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

    But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
    If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

    I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

    PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

    One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

  • Qosmio G10 134: the screen freezes after repair

    Hello

    Earlier my Qosmio G10 had to be repaired because of the vertical-bars-in-screen-and-broke-down-videocard-problem. They gave me a new motherboard and Nvidia Go 6600 and the problem was solved. I hoped... Because then I couldn't not to use the graphics card for more than 5 minutes.

    When I start playing a game, or so it takes 5, maybe 10 minutes in mind for my screen to freeze. Then precious is unresponsive to anything, even to the Microsoft-Magic-Combination-Ctrl-Alt-Del. very annoying to say the least... Does this sound familiar to anyone?

    Thanks in advance,

    Dave
    The Netherlands

    Hello

    I agree with the agramer. It is possible to s that you got different but better graphics card. On this page, I read that some users who repaired the laptop got a different card because the original of the delivered graphics card was off live.

    In this case, you should check your device for details of the map Manager and if necessary, you must install the right graphics card driver.

Maybe you are looking for

  • No sound on Satellite C650D - no driver for Win XP

    HY, I have a problem with the Satellite C650D, the pilot ofToshiba on: http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU I installed windows XP sp2 and it seems the software that they is not good... He takes out..

  • A few questions about his, BIOS and drivers on Satellite P100

    Hello Just bought the Satellite P100-188, thought I'd go with a top brand machine, however, on commissioning I am a little concerned about the quality of the speakers who tend to sizzle and distort. If right or wrong I thought that Harman Kardon woul

  • where do downloads removed when new versions are uploaded and deleted the 'old'?

    my internet secuity program found some vulnerable older downloads that require an update.  I downloaded the latest versions and then deleted the 'old' in the control panel.  (Picasa) appears on page downloaded 3.9 but when I try to install it says ve

  • Headphone Xperia Z2 in the phone does not work

    I have a problem, yesterday I was listening to the music on my xperia z2 and stop suddenly, headphones to work, I first thought that my headphones are broken but when I get back home I tested it on my PC and they worked.I tested my phone with other l

  • Change the font size in a label

    Hello I'm changing the size of the font of the text in my Label, but it seems It does not work. Here is my code: Label { text: title textStyle.fontSizeValue: 1.5 // no matter what value I use here, text height/size remains same :(( textStyle { color: