Tuner TV on Qosmio G10-105

Similar Questions

• Qosmio G10-105: the screen is black

  I was asked to look at a Qosmio G10-105 by a friend who claims that it functioned very well until one day "the screen went black.

  It seems to start fine but there is absolutely no image on the screen with backlight, no and no image "Dim". The problem is that when I plug in an external display there is also no image at all however becomes the external display backlit, but that's all.

  Can I assume that this is neither the inverter, backlight screen or I get no image on an external display?

  Is it likely to be the graphics card? If so, is it replaceable or it is part of the motherboard?

  I tried 2 external displays

  Any help / ideas would be appreciated...

  Thank you
  Rob

  > Is it likely to be the graphics card? If so, is it replaceable or it is part of the motherboard?
  Hmm. It really looks like a graphics card problem
  It was a good idea to connect the external monitor to check if the same problem would appear on the second screen that there is a simpler way to find out if this problem could be linked to the TFT screen or the graphics card.

  The GPU chip set on the motherboard and in most cases (in your case too) the whole motherboard must be replaced :(

  Unfortunately, but it looks like an expensive affair :(

• Qosmio G10-105 t - it work fully to the Canada?

  Hello, I live in the Canada and I think to buy the Qosmio G10 Toshiba Europe. Is could someone please tell me if the computer will work correctly in the Canada. In addition, if there are problems would I be able to correct by the purchase of additional hardware to Toshiba Canada.

  Hello

  Can you tell me please why would you buy laptops from Toshiba Europe? Is there a reason for this?

• Qosmio G10-105: standard VGA need driver for Vista

  Hello

  I want software for standard VGA graphics adapt nVIDIA GeForce Go 6600 for Vista

  Please help me

  I put t know what you mean by software for standard VGA graphic card, but I guess you a looking for a driver for Vista graphics card.

  Unfortunately, Vista is not supported on the Qosmio G10 and F10 series and therefore a graphics driver doesn t exist on the driver page.

• Qosmio G10-105: need driver VGA standard

  Hello

  I want software for standard VGA graphics adapt nVIDIA GeForce Go 6600 for xp

  Please help me

  The graphics driver for this laptop can be found on the European driver Toshiba page!

• Qosmio G10: Blue screen shot and later endless reboot

  Hello!

  I found similar topics on this problem, but they were locked and left unanswered.

  My problem is this: I have not changed of _anything_ in the BIOS for a log time. I have not installed new software or hardware lately. And I have not damaged my computer or anything like that. A few days ago I read a Web page when my computer turns off suddenly. It turned on automatically, then it asks me how to restart... count up to normal restart... the blue screen of death... restarts, wonder how... I choose "Safe Mode"... BSOD. I press F8 and try all possible options, but the result is always the same.

  A blue screen indicates: "MACHINE_CHECK_EXCEPTION" or something like that. I'll send more information about blue screens later and more machine ID.

  If someone has any idea what happed and how this could be fixed, do not hesitate to write.

  I can't access Windows and I won't use CD recovery (yet) because I need to save some data to the HARD drive first.

  I say it's all simply amazing. Graphics card a year ago broke down (blue/green vertical lines, fans are going full throttle) and now this! This is the 2nd time in two years when Qosmio brokes suddenly.

  Post edited by: ADMIN

  Ok. Here's some additional context information.

  My laptop Qosmio G10-105, model PQG10E-01D016FSR. After disassembly I was not able to access the windows more - not again. Several times that I managed to get into SafeMode so far, I was able to see the text "Safe mode" in every corner of the Welcome screen, but then it crashes. Once or twice the same in normal mode, Windows on the Welcome screen appears, but then it crashes immediately. In these crashes, blue screen says "MACHINE_CHECK_EXCEPTION" or 'PFN_LIST_CORRUPT' and landfills fysical memory on disk.

  If she does not get there and computer falls down at the beginning (even if the Windows loading screen) it restarts all computer instantly. Sometimes, he does not screen blue but says the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. This error can appear four or five times in a row then it tries to start normally, but blue screen crashes again.

  I can't find any logic in the accident, nor a way to avoid. It seems that various errors appear randomly. I would like to know if it is a crash HARD drive or something else. Other information are also welcome.

• Qosmio G10 - 134:Can, I attach a question of PS2 and PCMCIA slot

  Hello world

  I think buying a Qosmio G10 134 soon.
  1. How do you pronounce Qosmio?
  2. can we my son attach a PS2 and use the screen for his games?
  3 are there the PCMCIA slots on these machines?

  Thank you
  Lemarié

  Hello

  Self-monitoring analysis and Reporting Technology (or S.M.A.R.T.) is a technology that allows a PC to in some cases predict future failure storage devices. This SMART technology is present in your drive, but by default is set to off on your drive. To use the feature S.M.A.R.T. would require you a software (or BIOS) which allows and monitors the Smart status of your hard drive.

  HARD disk speed is unfortunately unknown to me.

  I'm sure that the TV tuner is set to Pal if you will buy it in the United Kingdom and may not be changed for NTSC.

  Qosmio G10 106 has 4 x USB ports and Bluetooth is not available.

• Qosmio G10: Breaking news - good news for the capture!

  I have a Qosmio G10. I live in Australia and bought the laptop here. I like to keep things so far and was analysis Australian Toshiba site when I came across a special update for owners of Qosmio here the link

  http://www.ISD.Toshiba.com.au/cgi-bin/AI1.exe/topic/content/driver_search_list.jsp?BV_SessionID=@@@1490231535 .1109544574@@@&BV_EngineID=eaddckkmlflebfdhcjkcfg ldkf.0 & theAction = true & CATOID =-15058 & MODE = NPRO & ProductMenu_0 = Notebooks & ProductMen u_1 = Qosmio & ProductMenu_2 = 897343 & x = 21 & y = 4

  I am still trying but install and use WinDVD creator I can choose to capture of S-video, Composite video or TV tuner. Maybe it's just that we all waited. You can change the quality settings as well. I looked on the site of Toshiba international and can't find it. In any case I hope this works for you all. There are a few release notes for the utility on the page as well. Good luck!

  Hello

  Thanks for the info. :)

• Video error on Qosmio G10 since the new software

  Hello world

  I have a problem with my MCE LiveTV. When I want to watch live TV, then always comes this error:

  "Error video - files neede to display video are not installed or not working not properly." Please restart Media Center or restart the computer.
  When I follow this order, nothing changes.

  I have this problem since I installed new software on my Qosmio G10 yesterday. It's called Magix Video deLuxe 2005/2006. When I uninstalled the new software, Live TV still does not work.
  It only works when I have sett my computer back to the time where I have not yet installed Magix Video deLuxe. But then I can't use the new software.
  I also tried to reinstalled the video driver and the TV Tuner, but the error is still there.

  What can I do now? Please help me

  I would say that the software that you install is not compatible with Windows MCE. It is possible and the cause likley. If you have all updates for windows and Magix Video and it still does not work then the problem is with the software application and the no compatibility. The fact that it works before and after roll you back OS proves it.

  What are you actually trying to do with the Magix software that Windows can't do?

• Software missing to get TV on Qosmio G10

  Hello

  My Qosmio G10 has just been repaired.
  I'm getting following error message when you try to use the TV feature:
  "the files needed to display video are not installed or they don't parpadean not correctly: restart the PC.

  Thus, some software are missing: which driver or SW? I couldn't find a good answer by browsing the full FAQ.

  Any help welcome, thank you.
  Polog

  Hello

  It would be very interesting to know what that means.
  Unfortunately, I put t speak French :(

  But I can speculate. I think that the TV tuner driver could not fail.
  This driver, you can find on the page of the Toshiba driver. You can try to reinstall.

  But why the message in French? Have you used a French OS?

• Qosmio G10 - how to upgrade the DMI information?

  Help, please!
  I have trouble with Qosmio G10. Toshiba support don't really.help me.

  I changed my motherboard with nVidia 6600 go and 915 PM and new BIOS. Now there are several problems: I tried to run the update tool CD, but it stops and «please use this CD with F10, G10...» Press any key to stop. I can not run product recovery, bad Machine.

  OK, I thought, this Forum search and found that there must be something with DMI. Download Toshdmi10.exe and run it on a bootable CD but the ID does not match!

  Now, I installed XP-Home Edition without recovery of MCE, but it seems that he's in trouble, because the laptop works single fix 598 MHz and has 45 Watt idle Powerconsumentation! It's a lot more before I think. Too much?!

  How can I solve the problem-DMI to run Update tool and recovery CD?

  Hello

  Normally the DMI information can only be updated from an authorized service...

  You wrote about a new mainboard is the same as older mainboard? Maybe the new chipset and graphics card are not compatible with the other pieces of equipment

  In your case I would contact the ASP again. Normally, they should help you if you explain your problem exactly. ;)

• Qosmio G10: windows from the CD recovery

  If I restore my Windows from a CD that was given with my Qosmio G10, I lose all my files?

  Hello

  Yes, you will lose all your files. If you perform a new installation, please use the expert mode and you'll be able to create two partitions. On the first, you need to install OS and the second that allows you to save all your data.

• Replacement card mother Qosmio G10

  After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:

  1. second HARD drive internal no more seen.
  2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
  3. always on cooling fan.

  Upgrade the motherboard consisted of:

  1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
  2. loading the CD-ROM TCN0000006 official update tool.
  3. no recovery BIOS or EC/KBC.

  Any idea?

  I m wondering how you did update the information in the DMI?
  As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.

  I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
  So maybe his bad card mother

• Qosmio G20 screen is comatible with display Qosmio G10?

  Hello

  Dose anyone know if the screen Toshiba Qosmio G10 is compatible with the Toshiba Qosmio G20?

  Thank you guys

  Of
  Sweet

  Hello

  I think display of the G20 should be compatible with the Qosmio G10 display.
  I searched a bit and found that the Qosmio G10-100 PQG10E was fitted with the 17 "WIDE XGA LCD.
  The Qosmio G20-101 PQG20E supports the same 17 "WIDE XGA display.

  Therefore, it seems that both units use the same screen.

• View properties (Qosmio G10)

  Hello

  Basically, I tried to show my parents on their TV from uni photos (Qosmio G10 - WIn MCE 2005). And it worked! Then, because I thought that the resolution was too thin, I decided to fiddle around with the settings in display properties as well as the utility of GeForce FX Go5700 to change and carried far changing the settings. After I pressed a button or another, the missing TV picture. I can't get it back.

  Anyway to reset or the default display properties and / or the GeForce utility - at least that will aloow me to continue to use my laptop for another presentation must in particular to uni.

  Thank you very much

  WB

  Yes, while the Qomsio is running, press Fn + F5 until you get a picture on its internal screen.
  Later,.

  Alcahest