HP Pavilion dv7-4065dx operating system does not work, drive hard main self-test results 303.

Similar Questions

• Qosmio G10: The operating system does not work corectly

  Hello. My problem is that my windows xp does not work corectly, mousecursor, sounds, videos, games, programs, everything turns into a ' stop and go '. as the cpu slows all the 1-2 seconds. I reinstalled windows now 4 times and any document in the format hd´s.

  Don t know what to do...

  and a second question... maybe this could be the answer for the first ;-)

  in my hardware-registration of my system windows are two elements, for I can't find a driver.

  -PCI-Device
  -videocontroller fuer multimedia (German ;-))
  in English systems, maybe it's the multimedia "media control device" or "videocontroller" or something...

  does anyone know if I can get the drivers, because they´re not listed on the toshiba site. and my backup-disk system was stolen. (sounds strange... I know :-))

  OK, please give me some advice, if you have any ideas!

  THX a lot, patrick

  Hello Patrick

  First of all, it will be interesting to know if the unit is pre-installed by recovery media. The installation of Qosmio is quite complicated, and I recommend you use the restore CD.

  In this way it is not possible to give a precise answer because I don't know what kind of things is installed on your device. I guess in your case, some application (such as the virus scan) runs in the background and your HARD drive can be pointed out.

  If your recovery DVDs is stolen, you can order a partner of service authorized in your country.

  Good bye

• Tot on HP Pavilion dv7-1090ed TV tuner does not work after the upgrade to Vista 64 bit Windows 7

  After having upgraded my HP Pavilion dv7-1090ed Vista 32 bit to 64 bit Windows 7 Ultimate, my TV Tuner no longer works. Windows Media Center does not recognize there is that a HP en DVB - T TV tuner is not able to find the digital terrestrial channels-tv, I could look under Vista.

  I searched several for one for the advice and tried to install several recommended drivers but so far without success. Can someone help me with this?

  Hi Charlie54,

  You can try using Recovery Manager to restore the software and drivers (Windows 7) to restore the original drivers, or you can try to install the Windows 7 drivers.

  Here is the Windows 7 drivers for the Software HP MediaSmart Live TV and the TV Tuner driver, they should both be installed.

  I hope this helps, please let me know.

  Thanks and good luck!

• Serial port under guest operating system does not work

  Running VMWare Workstation 7.1.3 on win 7-64 bit. Guest operating system is win 7 32 AND Windows XP (32 bit). I followed the instructions on connecting to the host serial port. However, there is no access to serial port a guest OS. Serial Port sniffer running on the host shows NO ACTIVITY on the port operating system serial host.

  Even serial device, attached and if running on the host works very well.

  Any ideas?

  Steve

  I doubt that the documentation is correct for what is with VMplayer 3 on Windows TGV serial ports is.
  Read my notes http://faq.sanbarrow.com/index.php?solution_id=1007

  I removed the option of thinprint and reconfigured the serial port in the vmx file attached.

  Turn off the virtual machine and replace the existing by the attached vmx file.
  Then try again

  If it still does not - change
  Serial0.yieldOnMsrRead = "FALSE".
  TO
  Serial0.yieldOnMsrRead = 'true '.

• Help! My operating system does not work with disc

  When I installed the DIGITAL SOLUTION DISK for my new EOS 7 d mark ii a window pops up stating:

  This software is not compatible with your operating system

  I use an old dell works well with XP, is there a way to get around this, I already have photo professional, eos utility etc. of my rebel...

  ANY help would be greatly appreciated

  Having been forced to upgrade too because I need to process RAW images from the 2 7 using Photoshop, I can tell my updates went well. I bought Win 8.1 & done a clean install on a new hard drive & waited to win 10 out & from my old programs would continue to operate. 10 once was readily available that I made an another clean install on another hard drive as an installation & nine 64-bit (added 16 gigabytes of memory also) & things was great when working in Photoshop, BUT for all those who 7 2 treatment check CR2 what device profile is best. By default, it chooses an Adobe profile that works very well with my other camera files but Standard camera looks better with 7 2 files.

  (My computer has provisions for 5 internal hard drives & I 5) I can easily re boot for XP or Win 8.1 if I need to use one of my old programs, but so far, I've been running Win 10 on my office & XP on my laptop.

• operating system does not work

  My laptop runs bt I dnt know why it is said that installing the operating system.

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you

  According to the message that you posted, I suspect that this could be due to the recent changes are applicable

  I'd like to request you to perform the procedure to solve the problem below:

  Step 01. Turn off the computer

  Step 02. Turn on the PC and keep pressing the F8 key

  Step 03. Select "Safe Mode" in the early startup Option list

  Note: Wait until you get to the Windows desktop

  Step 05. Please remove unwanted startup items and uninstall unwanted applications

  Step 06. Please reboot / restart your PC normally

  Note: Incase if these steps don't work you can continue to troubleshoot the issue once again

  Step 01. Turn off the computer

  Step 02. Turn on the PC and keep pressing the F8 key

  Step 03. Select "Last known good configuration" in the list of the early start Option

  Note: Wait until you get to the Windows desktop

  Step 04. Please remove unwanted startup items and uninstall unwanted applications

  Step 05. Please reboot / restart your PC normally

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• NIC Vista guest operating system does not work

  I am running VMware Workstation 5.5.5 build-56455, on a Win XP Pro host system.

  I just installed Windows Vista business as a guest operating system, but I can't get the network to work.

  How to make this work?

  The 'real' my Dell workstation NIC is a Broadcom NetXtreme 57xx Gigabit Controller, if it is relevant at all.

  Concerning

  MazH

  It seems that the virtual NETWORK adapter is not installed on the client, otherwise, you would see an adapter in the comments "ipconfig" with an APIPA address.

  Install the VMware tools in the comments (you always do). It contains the correctdrivers for the virtual card.

  AWo

  VCP / VMware vEXPERT 2009

• Problems of migration to a new system - guest operating system does not work

  I've been running VMware Player on a Win 7 64 bit laptop.  I have 3 computers of customers, which is 32-bit Win XP.  I've just set up a new machine, also running Win 7 64 bit, but a processor more recent (i7) and more memory (32 GB).  I use the same version of the player on both machines (4.0.1 build-528992).  I copied all the files from the laptop to the new office.  Ubuntu and Mac OS X Lion customers will work perfectly.  When I try to run the client Win XP, I get the following message:

  File not found: Windows XP Mode base.vhd

  This file is required to power on this virtual machine.  If this file has been moved, please provide its new location.

  I don't have a VHD file, I have a VMDK file (again, which works fine on the laptop).  I tried turn off the virtual machine on the laptop, then copying the files to the desktop, and I also tried to suspend, both with the same results.  When I try to change the settings of the virtual machine on the new desktop, clicking on the adjustment of the hard drive (IDE) causes the following message:

  The parent of this virtual disk could not be opened.

  The VMDK file is 19.2 GB.  I've searched and searched trying to find why this could happen and found nothing.  The XP machine has a good bit of responsible software that I use on a daily basis.  Last resort, I could create a virtual XP machine on the new desktop and reload all the software, but strongly prefer not to do it - it would be a tedious task.

  Does anyone have any ideas as to what could happen and how to fix it?  I copied the files several times to ensure that it is not something simple like a damaged copy.  I'm puzzled.  The XP machine was NOT initially a WIndows XP Mode machine, even if the message indicates that VMware Player seems to think it is (and, again, it works fine on the laptop).  The name of the virtual machine is "WIndows XP Mode" - maybe that's why he complains.  Is it possible to rename all of the files and references to files to resolve this problem?

  Any help would be greatly appreciated!

  Welcome to the community,

  We can be able to know if the virtual machine is one any "Windows XP Mode" VM or not to take a look at VMware.log virtual machine. Please attach the last file vmware.log file XP VM (that of the laptop), as well as the PC to your next post.

  André

• HP pavilion dv7-6101eo: > > light Touchpad does not work

  Hello. Just got my new pavilion laptop today and I love it! There is one thing to the point where I wonder about.

  It is this light that goes like a frame around the touchpad. When I started the laptop for the first time, the light was on but now I can't make light more. Is it an option in the settings? I would be very grateful for the help!

  / Ekeklonk

  Hello

  Press the combination of keys: Fn + SPACEBAR.

• I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

  Original title: undetected sd eject not

  I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

  From my understanding, most laptops allow you to simply remove the SD card back.  Others have a simple spring mechanism that requires you to press the memory card slightly until you hear a "click", similar to a click on a retractable pen, which must eject the card.

• My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  Just out of curiosity, why all these steps? Why not simply do step 9?

  1. #9 step alone can not have solved the behaviour & we wanted to be certain that no "leftovers" Norton formed the scr3wing things.

  2. I wanted to do some (possible) that your computer is not infected.

  Welcome & thank you for your comments. Mark one or more of my posts as RESPONSE will officially close your thread.

• Operating system does not stop. It continues to run after I pressed the close button.

  Operating system does not stop automatically.  Computer continues to run after I pressed the close button.

  Hi Solodeseo,

  Try method listed http://support.microsoft.com/kb/308029. Hope this will help.

• "Your operating system does not support the 64-bit version of Silverlight" when you try to install Silverlight on your computer.

  Original title: Silverlight problem

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  Clean installation of silverlight and reinstall...

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

• I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

  Silverlight installation problems

  I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

  Hello

  It's the operating system Vista Installation Forum.

  Microsoft has set up Forums to specifically to questions of Silverlight.

  They should be able to help you there.

  http://forums.Silverlight.NET/

  See you soon.

• inst-08072 operating system does not ipv4 support

  The installation of obiee 11 g, I get error "inst-08072 operating system does not support the ipv4". I changed the hosts file and set a loopback adapter.

  But it still doesn't work. Do you have any supposal for the problem?

  etc/hosts, file;

  resolution of name localhost # is handled within DNS itself.

  : 1 localhost

  127.0.0.1 localhost

  192.168.2.103 server1 localhost

  192.168.2.20 localhost

  Server is 2008R2