Qosmio G10 will not work with VISTA

Similar Questions

• Old HP P1100 printer will not work with Vist, which driver do I?

  After you have reinstalled my Vista OS, the old HP Photosmart P1100 printer will not work.  Should which driver I?

  That is very good news. What set of drivers that you finally end up using?

• The mouse driver and Touchpad Driver for Dell Studio laptop will not work with Vista

  I just bought a Dell Studio laptop at new years 2009 with the Vista platform.   I had nagging problems with the mouse driver and the touchpad pointer that were completely related software.  These questions were returning back over the months and months.   I've owned about 10 PCs since 1989 and I've never had a bad result like this.   My wife and I have lost 20 to 30 hours of our time looking after him.   This could have the Vista operating platform?   I suffered so much that I made my decision to seriously consider the range of Apple computers.   At this point, I lay the responsibility for the drivers who did not also work on Microsoft and Dell.  20 - 30 hours can go a long way in learning the OS from Apple.    I am a professional project management and professional engineer and can't believe that something as basic as the mouse driver and the driver of the Touchpad was a goner at the launch of the computer screwup.   I guess that the validation of test have been ignored.  I have never been madder with any computer I've owned.  I learned a lesson from this.   Do not trust Dell or Microsoft in the manufacture of new products.  As far as I know Apple users don't get treated this way.

  Sorry, but I really cannot speculate more what happens - or go - with your computer without being able to see the machine. It's the first time, you mentioned a bluetooth mouse and that you have installed the drivers three times. Certainly a bad image would not apply in this case. There are probably other things that pass only someone actually looking at the machine would be able to discern.

  However, since this is a new laptop and you are unhappy with it, return it under warranty and buy something else. I'm sorry that I wasn't able to help you. MS - MVP - Elephant Boy computers - don't panic!

• Tecra A10 - 14Q: 3 G UMTS modem will not work with Vista 64 bit

  Hello

  After that Vista 64 bit drivers have been made available, I changed the hard drive installed and a clean installed Vista business, as well as the drivers of Toshiba posted.

  All right, except that the Wireless Manager accepts the SIM card, PIN code, but shows that "Disabled transmitter" ('sender deaktiviert' in the German version). I can't find any idea where the problem is.

  In the window manager of 3 device G modem is fine and functional, the PIN is correct and accepted, and I have the latest drivers installed.

  Judgment of the laptop and to the hard drive me back to Vista Business 32 bit and UMTS card works well?

  Any help to solve this problem is appreciated.

  Kind regards

  YaGru

  Thank you vey much for this return of experience and that you share this information with other people here in the forum.
  I think it might b all useful for other users encountering the same problems.

  See you soon

• Dell 924 printer will not work with vista Dell 530__

  What do I need get the Dell 530 and 924 printer to work together.

  http://support.dell.com/support/downloads/driverslist.aspx?os=WLH&catid=-1&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=PRN_ALL_A924&hidos=WW1&hidlang=en&TabIndex=&scanSupported=True&scanConsent=False

  Download the drivers for it at the link above.

  http://support.Dell.com/support/topics/global.aspx/support/my_systems_info/manuals?c=us&l=en&s=Gen& ~ CK = anavml

  Read the manual.

  http://en.community.Dell.com/support-forums/default.aspx

  Ask to above Dell Help Forums.

  http://support.Dell.com/

  Contact Dell Support.

  See you soon.

  Mick Murphy - Microsoft partner

• The product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista business product key

  Product key bad for the wrong version?

  Hello

  Recently the computer in business inherited from a friend, very fast and very good. Regardless of the operating system no - geniue, is with Vista Business, while the thumbnail of authentication is Vista Ultimate. I took a screenshot of what it says when I put Vista Ultimate product key: (it does not appear if you are unable to use it: P)

  http://S13.PostImage.org/57nfn5pqv/vistareg.jpg

  He said: "the product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista Business product key."

  How would the installation of Windows Vista? My files would still be there when you need him? My drivers would still exist? No matter what to get deleted or become unusable? He would return to SP1? Any response is welcome.

  You can order form of the manufacturer's recovery media.

  The reason why the system as non-authentique shows currently is using a license in Volume KMS - these licenses must be re-activated at least every 6 months by connecting to the KMS user license activation server.

  It will require a reformat and reinstall whatever you do, unless you can connect to the KMS - Volume media server cannot be upgraded under normal conditions.

• "The product key you entered will not work with this edition of windows vista. You must run the windows vista Setup program or enter a windows vista product key. »

  I bought a laptop HP three years ago in Dubai, now I am in India, my family problem does not activate windows vista and also use it now, I try to use but asked the system to activate product key not found the product key at the bottom of my laptop I enter the product key but the system says "the product key you entered will not work with this edition of windows vista.»  You must run the windows vista Setup program or enter a windows vista product key. "In my company sticker a HP laptop, it says" Windows Vista Home Premium, also found in computer ownership 'Windows Vista Ultimate' and as low property said: you must activate today and return their product ID: 89580-014-0000025-71152, but in my laptop near the product key, wrote a different number which is "89580-014-0000025." what is the problem and how to solve that advice me please. ""

  Hello

  You can use this Recovery Partition to reinstall Vista to his new condition with the right edition of Vista.

  This recovery partition was photographed on your hard drive by HP during the manufacturing of the factory.

  You press F11 on startup to start the process of recovering back to factory settings.

  Here is the information about HP.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  If the recovery partition is damaged, you can buy HP's Vista recovery discs for a small fee.

  If HP's Vista recovery disks, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  modules common to xp... not on this model...

  added value for xp... not on this model...

  FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  C2D t8100, chipset intel, no normal fn keys FN + F5 doesn't seem to operate 'naturally', as do some others that I don't use, but the idea that I spent 8 hours to find all the xp drivers for this thing and can NOT dim my lcd...! ******ed...!!!

  The Toshiba REAL will raise your hand... Please?

  you KNOW millions are without downgrading from vista to xp, GIVE US THE DRIVERS...!

  I had to just to get the rest, scout intel boooted to viata while just to get the wifi, then start on xp, install the wifi, then had to get drivermax (amazing) to find all the drivers

  but no one knows where the FN drivers (no pun intended...)!

  None of the drivers Vista FN will get them to work with XP

  XP drivers for other models will not be installed on this model

  It comes from * ed

  1200 for a machine that cannot dim the lcd...!

  It is unlinke toshiba, how long could possibly take something for xp on to the A305 recompile!

  If someone has an A305 with c2d, get drivermax, they have now all other drivers of my job of paving 99.999% perfect...

  I will also publish on 4shared.com in a massive zip...

  Ok

  Send me a fix...!

  (too late for a refund...!)

  TOSHIBA! everything I own is TOSHIBA... !!! three laptops from toshiba... just give my xp for my A305 drivers...!

  If you come from the United States, I'm afraid, you're on the wrong place. Try to post the same thing on http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 it's US forum.

  Here are mostly from Europe and Toshiba Europe has nothing to do with Toshiba WE. The company, but may be different marketing strategy and support.
  Maybe you'll find people with the same opinion.

  > 1200 for a machine that cannot dim the lcd...!
  I take you seriously with your opinion, but after reading this, I think that this comment has nothing to do with reality. Recovery of installation image and you'll have the complete functionality for laptop. You have the stick of Windows Vista on your laptop?

• Unable to Access Manager device and receive an error message saying "MMC will not work with a version of Internet Explorer prior to version 5.5.

  Original title: control Pasnel: Device Manager

  Trying to open Device Manager in Control Panel, I get the following error message:

  "MMC will not work with a version of Internet Explorer prior to version 5.5"

  OS Vista Home Premium 32 bit SP2

  There are conflicting answers on Google

  1 virus Infection. Recommendation: complete the recovery. I ran several anti-virus and anti-malware program that pretend that my system is clean.
  2. added Version 6.0.0.0 for a registry entry will produce a fix.

  The first suggestion that I consider as a last resort, but don't want to mess with my registry without help.

  Does anyone have experience of this 'mistake' and can talk me through a patch.

  Hello

  Please keep us updated.

  Glad to know that you have addressed the issue. Your efforts to solve this problem is appreciated. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• I have a belkin f5d7050 will not work with windows 7

  I have a belkin f5d7050 and it will not work with windows 7 someone at - there a way for me to solve this problem?

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Photoshop CS2 will not work with RAW images in the Minolta DimAge A2.  It allows to work properly

  I used Photoshop CS 2 with my DimAge A2 for 5 years in the RAW format.  Now it will not work with RAW with my camera.  I'm using Vista 64.eu all the answers?  Thank you

  It seems to me that you probably had to reinstall Photoshop CS 2.  If this is the case, then, you must download and install Camera Raw 3.7.  The version that was on your installation disc has been updated several times.  And one of these probably included updates support for your camera.  Install RTAs 3.7 and see if that helps.

• Telstra Australia tell me that I have to use Chrome, as their facilities will not work with Firefox. Why?

  After spending literally hours trying to pay an account on Telstra Australia (that I just joined them, so it's the first installment), I finally gave up and contacted directly. I was told that Telstra services will not work with Firefox and that their preferred system is Google Chrome but Internet Explorer will not work.
  I have used Firefox for a long time and I'm happy with the program. Specifically, I have everything set up to work with Firefox and do not want to change. At the same time, I want to have the convenience of paying bills online.
  Can I load up, Google say, just one thing, or the program will then try to "catch" other functions as well?

  Yes, you can install Chrome and use it for a website. "Recovery" Chrome as other functions on your PC, just don't let it not be defined as "browser default" If you are prompted during the installation procedure. In addition, I doubt if you'll have a problem.

• New version will not work with the yahoo toolbar. How can I solve this problem?

  I downloaded the new version of Firefox, and it will not work with my yahoo toolbar more. It worked fine until I updated to the new version. I went back to the old version 16.0 and now he repeats to me my version is obsolete. How can I solve this problem and get the new version to work with my yahoo toolbar?

  To start, make sure you have the latest Yahoo toolbar.
  http://help.Yahoo.com/kb/index?page=content & y = PROD_TOOL & local = en_CA & ID = SLN5044 & print = false

• have the latest version of Firefox and I like the new tab feature will not work with my version 13.0. 1

  I recently upgraded to Firefox 13.0.1 and received the email touting the new thumbnail feature of the tab, the only problem is when I try to download the new feature, I get an error message indicating that my version of Firefox is outdated and the thumbnail of the tab will not work with her and to upgrade.

  Each as indicated, but it only opened a new tab with no thumbnails again.
  So I'm puzzled as to why it does not work and my Firefox does not show Windows or Firefox 13 in the right sidebar below.

• Received warning re. McAfee ScriptScan 14.4.1 extension will not work with FF 10.0.2 update and it will be disabled. How should I proceed?

  MY system is Windows XP, SP3, computer laptop, running FF 9.0.1. When you try to update to FF 10.0.2 I received a msg that the McAfee ScriptScan 14.4.1 addon will not work with FF 10.0.2 and will be disabled. Will I go ahead and install the update for FF? Wouldn't be a risk to security anyway? What's the worst?

  Hello

  A thread on the forum McAfee refers to this and those who have responded to this topic with FF10 said that it actually works, see https://community.mcafee.com/message/226187

  Hope this helps,
  Michelle