Qosmio G20 102: problem RAID the installation of windows xp media center

Similar Questions

• Product key does not work after the installation of Windows XP Media Center

  I lost my CD of Media Center and borrowed a friends to re - install.  I have the product key from the back of my machine.  This machine was built by me, so I have the retail version of MCE.  Any help would be greatly appreciated.

  Thank you
  Dave

  MAYBE...

  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  You MAY be able to get a CD from there.

• Problems with the installation of Windows 2012

  Hello

  I suck with creating a virtual machine as a server windows 2012.

  on the creation of the vm I then run the installation since the data store disc. When I selected the language and then clicked on install I always get a screen around "media not found driver...". ».

  I can't get around that, any ideas on how to fix?

  Hi again jmwebster,

  We had a number of previous reports of the non-Microsoft browsers forum repeatedly truncating the download of the installation of Windows 8 media.  If you still don't have success with your most recent upload and you are not already using Internet Explorer, it may be worth your while to use IE for this download Windows Server 2012.  I have not passed through the procedure myself, but apparently if you use IE you should be given the possibility to use a download manager to manage the download and verify its integrity and passing by that the procedure seems to have led to more positive responses from users of the forum who have problems before and had tried to download several times.

  Good luck with it!

  --

  Darius

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• Can I install SSD hard drive in the version of Windows XP Media Center 2002.

  Original title: ssd hard drives

  I have a Sony desktop running Windows XP Media Center version 2002. I am thinging about buying an SSD hard drive. I was wondering if it will work

  Hi Mike,

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand you want to find out if the SSD is supported in the version of Windows XP Media Center 2002.

  What is the model number of the computer?

  Windows Media center supports the SSDS. However, when buying, check with the manufacturer if the hard drive is compatible with Windows Media Center operating system in 2002.

• Problem with the installation of Windows XP on the Satellite A200-1RK

  Hello!
  I ve you have a problem with my laptop.
  I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
  Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
  Why?
  Can someone help me?

  Maybe I can use drivers from another laptop A200 series, but which?

  Hello
  a good explanation how to install XP on a SATA machine can be found here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

  Welcome and good luck

• Problems with the installation of Windows 7 Home Premium: ask load the driver during installation

  I am currently using Windows XP Professional Version 2002 SP3 with specification of my computer as below:

  Intel Pentium D 3.40 GHz 3.39 GHz

  3.5 GB RAM

  I tried to upgrade to Windows 7 by restarting my computer and boot from the CD. Setup goes as usual, initially, he asked for the language installation during installation, and after I clicked OK, the window titled "Load driver" had appeared with his message as below;

  "To install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK."

  What are the problems really? Because I think I have all the necessary drivers and before that everything works fine. Where can I get the drivers? And how to solve this?

  Help, please. Thank you. :)

  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• problem with the installation of windows 8 in my PC

  Hello

  I try to install Windows 8 in my computer, and this message is returned:

  "Recovery".

  Your PC needs to be repaired

  The Boot Configuration data file is missing some required information

  File: \BCD

  error code: 0 * c0000034

  You will need to use tools of recovery on your installation media. If you don't have any facility (such as a disc or USB device) support, contact you system administrator or the PC manufacturer.

  Press ESC for UEFI firmware settings.

  Please, I need help. Thank you

  Hi Aubin,.

  Thanks for posting your query in Microsoft Community.

  I understand that you receive this error message during the installation of Windows 8 and I'll be happy to answer your query. Let me ask you;

  1. How you try to install Windows 8?
  2. You have the installation media (DVD/USB)?
  3. Why the type of installation you are performing?
  4. Why do you want to install Windows 8?
  5. What operating system is installed on the computer currently?

  According to the guidelines of the error, it seems that you are trying to refresh or Reset. However, since you get this error, it appears that you do not support installation to complete the process.

  You can create the installation media for Windows 8 with the following steps:

  1. Run Installation of Windows 8 .

  2. When you are prompted to run or save the file, choose run

  3. When you are prompted to enter a product key, enter the 25-character product key, that you received when you purchased Windows 8.

  4. When you are prompted to install Windows 8, select install by creating media and then click Next.

  5. Select the type of media you want to use: either a Flash DRIVE or a DVD.

  To create a USB flash drive

  1. Click on the USB flash drive.

  2. Plug the USB key into a USB port on your PC.

  3. When you are prompted, select the USB key that you want to use, and then click Next.

     If you have files on the USB flash drive, it will remove them.

  To create a DVD

  1. Click on the ISO file , and then select the location where to save the ISO file.

  2. Insert a blank recordable DVD into your DVD drive.

  3. Burn the ISO of the DVD file using Windows disc Image burner, or another program DVD burning.

  Important: If you have any Windows 8 product key, you cannot create installation media. Make this DVD or USB flash drive that you use has nothing else stored on it and has a sufficient free space to download the Windows 8 Setup: approximately 1.8 GB for the 32-bit version and about 2.3 GB for the 64-bit version.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Lost folder of the Start Menu Windows XP Media Center shortcuts

  My system crashed a few weeks ago and I had to get it fixed.  I lost most of my programs, but reinstalled.  Yesterday I went to run an application in the menu START and the HANDLE has been note there.  Also my Microsoft Help and Support has disappeared.  Can you tell me how recovery these elements?  I have'nt had a chance.  Thanks Dyan

  Original title: Lost shortcuts folder of the Start Menu on Windows XP Media Center VERSION 2002 SERVICE PACK 3

  Control Panel, taskbar and Start Menu, Start Menu, tab customize, advanced.

  Scroll down and select what you would like to have in the Start Menu.

• How to activate the task for Windows XP Media Center Manager

  Some how my task manager got disabled.  How to activate it?  I have Windows XP media center edition.

  XP discussion groups:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Qosmio G50 will not complete the installation of Windows 7 64 bit

  Hello world!

  I recently wanted to updated my Qosmio G50 - 12f 32-bit from vista to 7 ultimate 64-bit. I did a clean install: formatted the c partition.

  Everything seemed to work fine until the screen "Setup is preparing your computer for first use. At first, I thought it froze just would not go further. Back to zero (in all modes) would get the same effect.
  But to my surprise and pleasure, she managed to pass this point when I desperately wanted to wait long enough for a miracle to happen. But the problems remain. The configuration process is right! REALLY! slow. I could painfully spend the first screens, like enter the name of the computer, activation screen, modes of security, but with a very long wait time between each. And every time he reaches this final screen of security modes that she would suddenly go to a BSOD:

  Driver power state failure
  STOP 0x0000009F (0xFFFFFA800193DD70, 0xFFFFF80000B9C518, 0 x 0000000000000003, 0xFFFFFA80029C8610)

  Please, anyone have any ideas on how to solve this problem?

  Of course, there should be a driver problem, but how do I update all the drivers without operating system running? I've seen such a feature in the repair of the installation DVD section, but it accepts only .inf files.
  And I can t find those anywhere on the toshiba support website. Only the .exe that you run from your operating system that is already running.

  In any case the Qosmio G50 was not as incompatible with 7-64 bit. So I'm a little confused here!

  Please help ^ ^

  Hello

  I want to ask you about the Windows Vista Dvd disc. Is - this original type one or more of the Assembly?

• HP ENVY14-J106TX: having the problem with the installation of Windows 7ultimate

  I have a laptop hp envy 14 series, model No.-J106tx; (product no.-P6M86PA #ACJ) with windows 10. I want install windows 7ultimate in there, but every time when I'm trying to install I get an error message:-"A required CD/DVD drive driver is missing.if you have a disk driver, CD, DVD, or USB flash drive, please insert it now.

  I saw a few on google and also in the hp forum solutions, but it does not work for me. I tried many ways such as the installation of the operating system via usb2.0, DVD, active the legacy mode, tries to start in uefi mode and all of the solutions that I know but I have failed.my all 3 usb ports are usb 3.0 and I do not see the option "" USB 3.0 configuration in Pre-os '. " So, how can I install it now, it will install if I use a USB 3.0?

  Kindly help me anyone please...

  The HP ENVY laptop - 14-j106tx product specifications page, your computer uses a 6th generation Intel chipset called "Skylake. Intel, remove support USB 2.0 since the chipset Skylake, so normal DVD and USB Windows 7 install does not work on the 6th generation of Intel chipsets. You must add USB 3.0 drivers in Windows 7 ISO using this utility Intel;

  ndows-7-USB-3-0-Creator-Utility https://Downloadcenter.Intel.com/download/25476/Wi

  After running this utility and direct to your Windows 7 ISO, ISO/USB/DVD that results must be able to install Windows 7 on your computer.

  You will also need the bottom driver for Windows 7 see hard drive... Extract the files on another drive flash usb without all records;

  tel-Rapid-Storage-Technology-Intel-RST-RAID-Drive https://Downloadcenter.Intel.com/download/25165/in...

  You will have to perhaps install the bottom driver to make usable USB ports in Windows 7.

  https://Downloadcenter.Intel.com/download/22824/us B-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Contro...

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• problem with the installation of window package

  Impossible to install, i-tunes, quick time and I downloaded Security software. Error message indicates a problem with the windows package install. On Vista, this is a fairly new problem
  Thanks in advance
  Jack

  Hi Jack8053,

  Thank you for visiting Microsoft Answers.

  · The error message you get when you try to install a software, what exactly?

  · Remember to make changes on the computer before this problem?

  It seems to be that some of the files windows install is corrupt. I have a few steps that might help you to solve the problem:

  Method 1

  Make sure that the Windows Installer service is running.
  1 open run and type services.msc, and then press ENTER.

  2. in the services window, locate the Windows Installer service in the services list.
  3. check that the status is "started". If the condition column is empty,
  Right-click Windows Installer, and then select start.
  4. change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  Method 2

  Run a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button.

  2. on the Start Menu, click all programs followed by accessories.

  3. in the menu accessories, right-click on command line option.

  4. in the drop-down menu that appears, click the "Run as Administrator" option.

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press ENTER.

  7. a message is displayed indicating that "the system scan will start.

  8. be patient because the analysis may take some time.

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue.

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Method 3
  1. If it does not help, try to uninstall Windows install using the Windows Installer Cleanup utility:

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/kb/290301

  2 restart the computer.

  3. download and install the latest version of Windows Installer by downloading from the link given below:

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  4. try to install the program and check that it works.

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer.

• HELP ME PLEASE! Several problems after the installation of Windows 7.

  Freezing programs, icons changed, customization does not work, on the taskbar icons are invisible. What can I do to fix these problems? For example when I click on firefox or IE, it is just thinking about and begins to (almost) never, or if I click with the right button on the icon and select anything on the list it is just there and and think. All my icons are similar to a piece of paper on my desk instead of recycle bin icon or the icon of firefox. When I right click on my desktop to change background it justs sits there and think and if TI dioes works all photos are empty. If you click on a paper painted it does not appear, but you don't see what you are clicking on just the title of the wallpaper. Just like my pictures if you consider them the sticker, they are virgins but if you click on the image that they invent it and you can see, please help...

  Windows Update has nothing to with the upgrade of Windows. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft