Qosmio G30-H163 in the title granted: can I upgrade my RAM?

Similar Questions

• HP 15 g207ax: can I upgrade my RAM on hp 15 g207ax laptop? I want to upgrade to 8 GB

  The reason to spend my RAM is for games... I like to play games... I bought this laptop 3 months ago... There is information in some sites than my knees RAM can be upgraded up to 8 GB... But in the hp Web site, there is no information about the RAM... So I'm a bit confused. Can I upgrade my RAM or not?

  I hope that this information may help you

  Hello

  Please try the following manual/guide:

  http://h10032.www1.HP.com/CTG/manual/c04513485.PDF

  Several manuals:

  http://support.HP.com/us-en/product/HP-15-notebook-PC-series/7486438/model/7643147/manuals/

  Kind regards.

• Qosmio G30: problems with the reboot or shutdown

  My computer is a Qosmio G30 and there is this problem of restart or shutdown. I click the icon once and it closed to some programs. I had to click on it again to restart or stop.

  How to remedy?

  Hello xingmao

  It seems that some application fails to close properly. It is difficult to say that who and why.
  Try to uninstall the software that you have installed right before this problem started for the first time. With a bit of luck, you might find the cause. Otherwise, you can do a final solution a recovery facility.

  Windows associated problems are really difficult to locate.

  Concerning
  chain

• Qosmio G30-194 support the sata2?

  Hi all

  I have a laptop Qosmio G30-194. I would buy an Intel ssd, but for the ssd SATA 2 must support. Because just SATA 300 when the ssd running at good speed. I mean 250 MB/s read. The SATA 1 only works max.150MB/s.So my question is my laptops SATA2 support?
  Thank you very much for the help.
  Kornel

  Hello

  As far as I know the HARD Qosmio G30-194 disk controller supports single SATA (150mbps).
  I put t know what specification is the SSD needs, but for example s SATA2 HARD disk can be used because the SATA is compatible.

  However, if the SSD to the SATA2 controller (300mbps) while there might be a problem

  Welcome them

• Qosmio G30 - problem after the system recovery procedure

  I Qosmio G30 - 148 who have Windows XP MCE, trying to download some system programs crashed and make automatic restart.

  I then used a RECOVERY CD to recover my system all and followed the instructions on the CD but when finished and restart the system, a famous blue screen telling me there is a problem in my system and windows must be restarted.

  When restarting in safe mode, it is a message telling me that the system is not fully installed. Please, rerun the Setup program.

  You could any body help me in this problem because it's a strange problem?

  Note: I tried to install Windows XP from external CD but the system did not have the hard drive.

  You are right. It's a really strange problem. I don't know if you use some external devices but before you start recovery procedure please remove all connected devices.
  The fact is that this recovery image is designed for this model of laptop and the specific hardware configuration. If the BSOD occurs after the installation of the image it takes little hardware related issue.

  I don't really have any other explanation. Problem is that no one here will be able to offer an accurate diagnosis, and we can only speculate what may be the problem.

  Try to do it again to the recovery facility, but if the problem persists I fear that you need professional help.

• Re: Qosmio G30 - RAID of the problems when installing the OS

  I got my Qosmio G30-161 for half a year and he had thought should be time to reinstall everything, so I could get rid of things I didn't need (programs, viruses and uninteresting video clips).

  So I took my XP MCE Cd and tried to install, and I am guided me through and come to the place where I had to choose between unknown 1st and 2nd 3rd stripping mirrored. I chose the stripping as I wanted my drives to be in one. Then when I pressed "next" it gave me the error message "1005 - HDD is not ready?

  I tried to go into the BIOS and change the setting of different parameters of Toshiba told me to, but he also warned that if I changed my OS settings will need to be reinstalled. No problem. But I still get the same message error "disk is not ready?". So now, I have to use a computer other than mine to check the forums and mail etc.

  Anyone know what I need to do? I'll be happy with anything as long as I can have both my hard drives (60 + 60 GB) and OS work. :)

  Please help, I would urge for her, because the computer is the one I use for my school work. Feel free to ask questions about the tricks of the system. If you have an answer, please let it be simple, because I really don't want to mess up again ^_^

  Please check the details relating to the installation of RAID user's Guide.
  Usually if you use the clean Windows XP disk then you need to include the RAID drivers first.
  Without pre-installed RAID drivers HARD drive will not be recognized and you will not be able to install the OS!

• Qosmio G30: Conflict between the audio driver Sigmatel and Vista SP1

  Hello
  I have a laptop Qosmio G30 PQG32E and impossible to move to Vista SP1 because the driver Sigmatel (6.10.5462.0) is in conflict with the service pack.
  As some of you may know, there is no Sigmatel and IDT who bought them is so say nonexistent, saying to contact the OEM directly to drivers updated.

  Is there a plan to upgrade the audio driver?
  There are huge memory leaks in my case from the audio driver.
  If you use Photoshop or Premiere Pro, the audiodg.exe process consumes 800 MB and more after an hour of continuous work.

  I hope for an update driver stable and more stability of the SP1.
  I am a dreamer?

  The problem is that the final version of Vista SP1 is brand new and it may happen that some drivers don't support this new service pack.
  In this case the driver needs to be updated.

  If you will not find the latest version on the Toshiba page then maybe you can find it here:

  http://www.IDT.com/?ID=3969

  In any case, the solution is the update driver and sooner or later, the update will be available.

  Good bye

• Qosmio G30 - Question on the Raid driver

  Do I really need this driver to use RAID functions? If its set in BIOS, what makes the pilot actually do? outside you give health statistics?

  See you soon

  Yes, you need the RAID driver.
  I think that the Qosmio G30 has been designed with the RAID feature as some units of the G20.
  Without this RAID driver, you will not be able to install the OS because the OS Setup may not recognize the HARD drive.

  RAID uses two options:
  RAID 0 (Striping): two hard disks are used as a big drive, if a HARD disk fails all data is lost
  RAID-1 (Mirroring): hard drives contain the same data if a disk fails, data is not lost

  I think you could check this announcement and also use the advanced search to forum for more results on RAID.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14349&MessageID=52359

  In the user manual, you will also find lots of info on RAID

• Qosmio G30-175: why the properties system tell Media Center 2002 and not 2005?

  Hello

  I have a qosmio g30-175, it says on the sticker of the authentication windows on my laptop computer Media center 2005, the problem is that when I check the system properties in Control Panel, it says units media center 2002 SP2. I find it confusing, Toshiba gave me the wrong version, or is it quite normal.

  I installed windows by using the recovery disk of the product came with my computer.

  Thank you.

  Don't worry man. Everything is ok! You have a MCE 2005 version

  You have simply checked versions MCE in the wrong way!
  If you want to check the MCE versions open media center, click on "settings", then click "about media center". The version of MCE will appear.

  What you're watching now is the version of XP/OS. The XP is the Foundation for MCE. ;)

• Can I upgrade level RAM and HARD drive?

  Hello

  I am model using Vaio VPCEA16FG since I much of desigining graphic and programming of work in my vaio can I upgrade RAM 16 GB and 1 TB HARD drive?

  Thanks in advance,

  Joseph

  baudson,

  I can't comment directly on your device (VPCEA16FG) because this isn't an American model, but it is very similar to the series of VPCEA2xx which, according to the spec, can take up to 8 GB ram (DDR3/1 066 MHz).  The hard drive is a SATA probably accommodating a 1 TB drive, but our repair manuals has the largest size being 640GO for this series...

  If my post answered your question, please mark it as "accept as a Solution.

• Qosmio G30 - lines on the bottom of screen and blue

  Hello

  I m a lot of problem with this laptop...
  Having bought some time ago it s summer works well, but out of the blue it s given me...
  I switch on the laptop, and when the Qosmio logo picks up his all with lines inside and rather than the background is black it is blue... after that funny of characters begin to appear on the screen and the Windows Xp logo appears then a blur a blue screen comes up with an error it blinks fast if you can not read and the laptop restarts...

  I tried to reformat, but the same problem occurs. Help!

  see you soon

  You are using Windows XP?
  Fact the same question is displayed using the OS preinstalled Toshiba?

  Check this box!

• Qosmio G30 - capacity of the HARD drive even after disable RAID

  Hi all

  I have a G30 with two hard drives, which were broadcast in RAID 1 configuration for a year now. For RAID 1, I activated the mirroring and everything worked perfectly.

  However, I'm now running out of space so I turned off mirroring using RAID console.
  My question is "why do I always see the same capacity of HARD drive when I go on my computer? I hope that there is a simple answer to this.

  Thank you for Uncle Bob.

  Can you see the drive in disk management?
  Perhaps the HARD drive is not enabled or needs to be formatted.

  And the BIOS recognizes the another HARD drive?

• Qosmio G30-161: update the Bios needed BACK

  OK, I have a lot of knowledge about computer and please I need the Bios update but not windows based.
  I need BIOS update traditional back!

  The reason I want this is because blue screening in windows that I changed the HARD drive always even.
  I changed the memory and checked the fans always the same.
  I even tried to install XP using xp manual not restore disk using the sata drivers downloaded always the same.
  So now I know 100% if I managed to get the back of the bios download that this problem will be solved.

  Please, someone knows where.

  Thank you

  Unfortunately, Toshiba doesn't provide updates of the traditional BIOS. Only the win versions are available on the page.

  By the way; Why are you 100% sure that the BIOS update would solve this problem?
  BSOD problems are mainly related to the hardware malfunction or software problems.
  Usually, you should recovery the Qosmio with the restore CD provided. If the BSOD will appear during installation or immediately after installation, then the hardware problems are possible

• Qosmio G30 - where is the alarm battery under Vista?

  Where is the battery alarm on vista? I really liked the toshiba power saver because she warned by a beep loud when my battery fell to 2%

  I can't install toshiba power saver because it is replaced by panoramas energy saving...

  Hello

  You cannot install the Toshiba power saver because Toshiba didn't conceive the Toshiba for Vista energy saver.
  Vista energy saver supports several options and tell the truth, the Vista energy saver looks a bit like the Toshiba power saver.
  What do you think???

  Check the control panel and power options. There are various settings that can be configured.

• I have a Qosmio G30-204 and the darks went fuzy red pixels

  It started today and appears whenever the screen goes black and you can also see the normal red pixels of display, everyone has found this before.

  Hello

  You mean you can see the red dots on the screen while it s black?
  See you on the external monitor also?

  If not then I think it might be a screen issue may be dead pixel or something like that
  What do you think?