Qosmio G30 repeatedly "blue screens".

Similar Questions

• Qosmio G10-137: blue screen after re-install using Recovery CD

  Hi all

  just got my qosmio G10-137 earlier this week after being under repair since the beginning of the month of January! Guys made the repair found no better then install the Dutch version of the operating system. I don't like this, then I took out my recovery CD and began the recovery. Everything works fine and I am asked to remove the media and reboot my PC.

  This beautiful laptop to start early and... Blue screen of death. Restarts, wonder how to restart... count up to normal reboot... BSOD... restarts, wonder how... I choose "Safe Mode"... BSOD... I choose the mode safe mode with prompt... the system.ini file is missing!

  It seems that the recovery CD is bogus.

  If someone has encountered this? Does anyone have any resolution?

  Kind regards
  Wim

  Post edited by: wvl

  Hello

  It s very strange because the recovery CD was tested and install several times. It should work without any problems.
  I put t know where you come from, but the service partner should install the Windows operating system in the same language. In this case, if you bought the device in Dutch the recovery CD and the OS are in the Dutch language.
  Please note that you must use the same recovery CD that came with the device. Another recovery CD will not work.
  What you can do is to test the unit with an original CD of Microsoft Windows. It would be very interesting to know if the blue screen appears with the original Windows.

• Re: Qosmio G30 and green screen problem

  Dear friends

  I thing is interesting for any owner of Qosmio to look at this:

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/comment-page-4/#comment-130784

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/

  My Qosmio G30 is already dead, I got an estimate from the official service, to repair my qosmio costs nearly 600 pounds. Is a design flaw. Go on the internet.

  Interesting links! Thank you.
  I have to say then I must be lucky. My Qosmio G30 (German model) works well and without any problems

• Qosmio G35-AV600: blue screen during the installation of Vista?

  Hello

  I have a G35-AV600 one I am trying to install windows vista.
  I followed all the instructions for the driver raid and all with pure install.

  But my problem is that, after the first reboot, I get a blue screen with an error message.

  I know that some people had the same problem since they were posted here but no solutions have been posted.
  Please if you have an idea how to solve this problem, help me, I'm desperate.

  Thank you.

  Hello

  We need more information to try to help you.

  As a first step:
  Have you upgraded your Qosmio G35 to be a Vista capable?

  BIOS available for download from the Toshiba Web Site:

  Version 3.30 25/01/2007
  Changed the BIOS to be compatible with Windows Vista.
  Added support for the digital tuner US OpenCable Unidirectional OCUR (Receiver). (Shut UP-PQG33U only).
  Additional requirements for Intel to improve stability when using the Intel Core 2 Duo as a single Core processor.
  FIX: A smart card containing a TI controller is always set to disabled.
  Fixed: Times wired / wireless LAN insured Wake-on-LAN functionality.
  Fixed: Ensure a remote to work Express Media Player.
  Fixed: Exclamation mark (!) appears when starting a model of TV tuner, while the RF switch matrix is turned OFF.
  Fixed: S3-wake question pertaining to the remote control mode. (Models Japan only with EC/KBC V1.10)
  It is the first version of BIOS for PQG33U models.
  This BIOS supports Windows Vista and XP.

  But my problem is that, after the first reboot, I get a blue screen with an error message.

  Would you please, let us know what is the error message when you have a blue screen?
  Report any information given at the bottom of the blue screen.

  Francisco

• Qosmio G30-126 - black screen after the awakening of the mode standby

  Hello

  If I just put my Qosmio G30 - 126 mode (button or just close the housing cover) sleep it start back only with black screen. HD is being run but nothing else. I have to turn it off and start again with the start-up. Of course come screen with menu to speak of a problem... Don't have pictures. The resolution is minimum, I have to change.

  I'm please that reinstallation of the system, it's not what can solve problems.
  My question who will pay the time if she will not solve the problems, they said that it will be in all cases.

  Why I bought the warranty?

  PS. Admin confirms my messages...

  Post edited by: ADMIN

  Found this thread and I would like to share my knowledge with your
  I had a similar problem several months ago on my laptop with the XP operating system preinstalled.

  The MS patch KB917332 helped.

  [The monitor does not light when you move the mouse or press a key after you have configured the 'Power Options' settings on a Windows XP SP2 laptop | http://support.microsoft.com/kb/917332]

  See you soon

• On the Qosmio F50 of blue screen problem

  Hello world!

  Suddenly, I have a problem with my Qosmio F50. Frequently, it goes to the blue screen and says there is a problem with the hardware. I am running Vista and I havnt really brand new programs installed recently. I tried to write the code for the last time, it's happened, but has failed to catch the last didgits:

  STOP 0X0600008E 0CC0000005 (0X00000000, 0XA7F5IA9C...)

  Can someone help me please?

  Thank you.

  Hi blackgravy,

  At the present time it is difficult to tell why you get a blue screen it s often associated with drivers or RAM/HDD. First of all, you must follow the instructions posted by Akuma. Check your RAM with Memtest86. It s a freeware for RAM diagnostic tool where you can download an iso image to create a startup disk.

  To test the HARD drive, I can recommend similar Drive Fitness Test procedure such as Memtest86 with iso image and the bootable disc.

  Check this box!

• Qosmio X 500-blue screens and video display problem

  Hi all

  I bought my Qosmio X 500 (PQX33A-02g00j) about 2 months ago and have had recurring problems, which fortunately I documented, with blue projection (actually this is my second unit as the 1st was defective).

  I have re-instanned factory three times and minimum the newest driver (one store told me version 188.75 and the card is a Gforce GTS 250 M). I note, there are a few forum posts dealing with or question on the screen flashing etc, but it was always going to re-start and blue screen

  The computer can do this 2 or 3 times in a row and then possible work for several days without any problem? This happens especially when im using Adobe or Word (not hungry graphics applications).
  Is there an answer to this problem here because next week it's back to the store for a full refund - whether they like it or not?

  Thanks for your time on this

  Hello

  Your laptop is fine, but all the problems related to the BSOD is nvidia graphics card driver. It looks like this nvidia programmers don't want to fix a bug... I have recommended you download graphics driver http://www.nvidia.com/object/notebook_winvista_win7_x64_197.16_whql.html download and install. Hopefully, you won't have no blue screen

• Qosmio X 500 - blue screen or system crash when you play

  I have problems with my new laptop.
  The laptop is a week and I get frequent blue screen errors and system crashes when you play.
  At this time I only tried to play a game: World of Warcraft.

  I have run on:
  The original that came pre-installed graphic drivers.
  The latest updated drivers from the Web from Toshiba site.
  The latest drivers for laptop on the Nvidia site.
  I also removed all the drivers and allowed Windows update to find it's own who have a different version again.

  In these four cases, drivers seem to work fine for a while, but will eventually stop responding and the system crash when I start to play a game.
  It happens shortly after the start of a game and other times it can happen after a few hours of game play.
  Sometimes it will result in a blue screen, sometimes the game will change from windows with the error message on the display driver does not.

  I also did a clean installation using my own copy of Windows 7 with the amount of the absolute minimum of software installed to rule anything that might cause a conflict which was preinstalled.

  I also tried to run to run the game in compatibility mode, although I had no problem with my laptop last run the game in Windows 7.

  The windows event log always indicates a problem with the graphics.

  Did someone else has similar problems or found a solution?
  For a laptop that is announced for the game, I would have thought that this kind of thing would not be a problem.

  Hey,.

  In my opinion, it has something to do with the display driver or the graphics card itself I always use the most recent display of the official website of Toshiba (NOT nvVidia) driver because they are pre-tested. If you install the latest driver from Toshiba.

  After this also make sure that you use the latest version of the BIOS. You can download on the official website of Toshiba too.

  I put t know how long you have your laptop, but it should be cleaned from time to time (3-4 months). Therefore, you can use jet of compressed air to blow off the dust.

  Check it!

• Qosmio G30 102 Fan & screen freeze

  I was on my laptop the other day when I folded slightly the charger forest that goes into the laptop to the back and immediately the blue screen of death came and my laptop closed. I restarted my laptop only to realize that if I leave the charger in the fan will control which means it just starts going into overdrive without stopping and the laptop freezes and the only way to stop this is to swith the laptop off completely.

  I restarted my laptop thought if could be a problem of software, but as soon as I plugged a USB device as well as the charger my laptop even once broke down in the same way (fan in overdrive and freezing screen).

  I recently got my laptop fixed due to the card being damaged, and it was only 4-5 months ago, what could it be this time since no other defects were found.

  If anyone can help or give suggestions I would really appreciate it.

  Thank you

  You should get this replaced adapter, it may be a short circuit and causing the bad input voltage, with the result an unstable system.

  I would send the entire system to an ASP for repair.

• repeat errors to blue screen

  I get repeated blue screen errors. I followed all the advice that was available on the forum. Updated, network card drivers graphics etc. I'm out of options and I would give it one last shot before you do a factory reset. My Pc startup has also declined from the end. The minidump files have been shared

  https://onedrive.live.com/redir?RESID=E91B0EA055940591%21106

  Help, please!

  Joshua

  Uninstall Quick Heal, at least for troubleshooting purposes and install Microsoft Security Essentials.

  Quick Heal product removal tool.

  http://www.Quickheal.com/prod-REM

• Qosmio G30: blue vertical lines and crash dump blue screen

  I have a Qosmio G30, model No. PQG32C-AV605E with BIOS Version 3.40.
  I want to update 3.90, but I can't get into Windows.

  How update the BIOS without windows available?
  Y at - it a utility BACK?

  If so, please send and I will download it or send me an email on where to download.
  The G30 that I has vertical lines blue on the screen when the computer starts in VGA mode entering into Windows for the first time.

  But the machine can not get into windows, it freezes and dumps and restarts before that.
  I replaced the RAM with new RAM, but it has no effect.

  I ran the diagnostics utility and hard drives are OPTIMAL in RAID 1, so no errors there.
  Reinstalling Windows went well: I can't do it in VGA mode without lines.

  Toshiba technical support told me that an upgrade of BIOS fix it.

  Thanks for any help.

  Hello

  have you tried to plug the external monitor? If it still shows blue vertical lines, the reason is a failure of the graphics card. (You can also reinstall Windows to check the related issue of f it's Os). Otherwise, contact the after-sales service.

• Qosmio G30 - blue screen of death

  recently I had this error on a blue screen when starting my pc (I can't go in either safe mode) so I decided to start from the cd and repair the system, but the problem is I can't boot from the cd or a port USB of my laptop Qosmio g30... the problem is that I tested the cd on my friends pc and it booted from it mine shows the following message
  "During initialization and the link...".

  PXE - E61: Media test failure, check cable
  "PXE - MOF: exit Intel Boot Agent.

  I really need help here and I don't like the data on my c drive, so if there is no solution I would appreciate

  Thanks in advance.

  Which CD you want to use for BONE repair?

  Akuma is right. This message occurs if the laptop can not boot from optical disc or HARD disk drive. Then automatically seek next boot device and it's LAN. This message is typical for the start of LAN (cable not connected).

• Qosmio G30 - lines on the bottom of screen and blue

  Hello

  I m a lot of problem with this laptop...
  Having bought some time ago it s summer works well, but out of the blue it s given me...
  I switch on the laptop, and when the Qosmio logo picks up his all with lines inside and rather than the background is black it is blue... after that funny of characters begin to appear on the screen and the Windows Xp logo appears then a blur a blue screen comes up with an error it blinks fast if you can not read and the laptop restarts...

  I tried to reformat, but the same problem occurs. Help!

  see you soon

  You are using Windows XP?
  Fact the same question is displayed using the OS preinstalled Toshiba?

  Check this box!

• Qosmio X 300 - 13W displays a blue screen and 0 x 00000124 STOP error

  Hey guys and girls.

  I need urgent help with my new Toshiba Qosmio X 300 - 13W (British model) that I bought in December
  I chose to install the 64-bit Vista Home Premium on the computer and the slopes of big thing until I HAV a work of high intensity for it as a game or to have several applications running at the same time:
  The screen goes black and the sound begins to "jerk" (repeat in a very short loop for awhile) before crashing to a Windows blue screen
  The blue screen said he "detected a unsolvable material error" and the technical Ref of the error message is "STOP 0 x 00000124 (0 x 0000000000000000, 0xFFFFFA8008FE2030, 0x00000000B2000040, 0 x 00000000000800).
  Anyone else with the X 300 - 13w has this error or someone has an idea what to do.

  Thank you very much in advance.

  I think that goes to the GPU. It could be overheating.
  Download HWmonitor and run a game for 5 minutes with it running in the background and then go out and check what HWmonitor has recorded for the MAX GPU temperature.

  [http://www.cpuid.com/hwmonitor.php]

• Qosmio G30 - white lines on the screen and BSOD

  1. I have a Qosmio G30
  2 operating system Windows XP MCE
  and I have problem "white lines on the screen ' when windows start to load after that I got the"blue screen of death"and restart the computer.
  I try to get back, but unfortunately came with the laptop recovery CD doesn't seem to work...

  Whenever I finished to recover I have "windows loading files" and once this is done, it shows me the so-called "blue screen of death"...

  Hello

  I m afraid. I have bad news for you ;(
  I think you ve you have a problem with the hardware in my eyes, there might be something wrong with the GPU chip.
  The white lines on the screen could be related to a faulty graphics card and get the BSOD error due to a hardware malfunction or software serious questions

  I m sure that the recovery CD does not contain software problems and therefore only the fault of hardware could be the reason for the lines on the screen and the BSOD.

  In my opinion, you should contact the ASP in your country for assistance if all goes well you guarantee is valid.

  Good luck