Qosmio G30 white screen when you start Windows XP

Similar Questions

• Computer stops responding with a black screen when you start Windows XP. Cannot select anything advanced startup options

  Original title: can't open Windows
  I can't open my laptop at all... block when I select anything in the mode without failure or screen black normal mode :(
  What should I do? Thank you!!!

  Hi Mihou,

  1 have. what changes you made before the question?

  2. What are the options you see in the advanced startup options?

  You can follow the methods in the article in order to solve the problem.

  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/?kbid=314503

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Computer stops responding with a black screen when you start Windows Vista

  Computer ceases to respond with a black screen when I run Vista, this happen right after the installation of updates. original title: computer stops responding with a black screen when you start Windows XP__

  If you think that Windows updates are loaded:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• How to disable programs and commissioning that run when you start Windows 7

  How to disable programs and commissioning that run when you start Windows 7

  Hello

  References to Vista also apply to Windows 7.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns shows you the complete list of
  Locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Monitor Monitor - free - file system, registry, process, thread and
  Activity of the DLL in real-time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  Technically, since it's the same effect with the same settings, it works on both sizes. However, you need to test both is to decide if it will appear visually correct on both screens or not. On screens more wider/taller objects can appear earlier on the screen, it is advised to test again on both screens.

  See you soon,.

  Vikas

• Error loading C:windows\mstapox.dll, when you start Windows XP

  Originsal title: error loading

  When starting, I get the following message: error loading C:windows\mstapox.dll

  Does anyone have a solution?

  There is no file with this name in XP.

  In addition, there very few dll that must be load in the c:\windows folder and is not one of them.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  If that's really what you see, then your system is now or was hit by malware.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Remove the top bar when you start Windows

  How can I keep the top bar that appears when I start Windows from popping up automatically? It is with the Explorer solutions, help, games, etc. It appears in the upper part of the screen.

  Hi Greenpoet 73,

  Click on 'start '.
  Type "msconfig" in the search box
  Press enter
  clicks zone UAC (user account control)
  Click on the "Startup" tab
  There will be a program from your computer manufacturer (Dell PC is delldock. HP/compaq PC it is called HP advisor.) Clear this check box to make the bar appears only not at startup.

• When you start Windows XP Professional I get warning no. firewall is enabled.

  For about a week now when I start my computer at the bottom of the screen I get this message "your computer is perhaps in danger that no firewall is enabled. Click on the bubble to solve the problem. By clicking on the bubble I get Security Center, which shows the firewall is. There's the word (underlined) Reccomendations. I click it and turns on the firewall. After that I get an error message. "Exception EAccessViolation in module DD. exe to the access violation of 0003AE67 at address 0043AE67 in module 'dd '. Read of address 00000008. I never had this problem before, ever. Is it possible to fix this?

  Hi SilvioCarlini,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3 when was the last time it was working fine?

  Method 1

  See the link below and run the Fixit tool, check if it helps.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/

  Method 2

  If fails it above step then check out the link below and run the Fixit tool, check to see if it helps.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

• I get a screen when you start the computer.

  Hello

  How are you?

  Recently, my system hung up and had to do a force restart. I get a screen when starting my computer with few options. I have to click ESC several times to get rid of the screen. This was not an option before. When I start my computer it used to start normally. How to get rid of the screen? Please advice.

  Photo I took of my mobile is attached.

  Windows 7

  AMD athlon

  Auto system

  Thank you

  Gershom

  Hi all

  Thank you for the support.

  I solved the problem by unplugging the cable from the hard drive inside the CPU and connected again. All is well now.

  If the system is not the start or make obstruction to the start-up stage, you can try the same thing.

  All the best.

  Thanks again John and Gerry.

  Surya Kumar

• Satellite A200-22I - DHCP and SENSE of the problems when you start Windows Vista

  When I started my laptop yesterday, I noticed it was going quite slowly, more there was a message saying that windows could not connect to a specified service.

  As a result my firewall was off tour and I can t connect to the internet. I tried to turn on the firewall, but I couldn't... and today, I tried another connection to inalambric, but I couldn't connect to the internet.

  I checked the registry of the solution and the problem and found it was something related to DHCP and sense.

  But really, I don - t know what causes this problem...

  I searched other forums where people have had the same problem but I could t find any solution apart from reinstalling Vista...

  Can someone help me? Help will be very appreciated!

  Thank you

  Hello

  What do you mean with SENSE? I never heard tell about.

  I put t know what are the causes of the problem too but did you look in Event Viewer? Sometimes, it's really useful.
  If you have a network problem, you must update the driver WLAN or LAN (depending on whether you are using). You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  It would be interesting to know what Windows service, you mean. View more information on this error.

  Welcome them

• ' INVALID BOOT. Message from INI file when you start Windows XP

  I get the error message "INVALID BOOT. INI file"when I start the computer, but then, it goes into XP.  Could someone tell me please how to fix this?  I don't have the Windows XP CD because my friends brother died and they gave me the computer, and it was already installed.  I could get the CD if necessary, but I was wondering if there is a way to fix this without it?  Thank you in advance for your help!

  If you see a message like this:

  Invalid BOOT. INI file
  Booting from C:\windows\

  This usually means that the c:\boot.ini file is missing, but you can replace it.

  Miss the file would require a little extra work, since it is normally a hidden system, read-only file, but I can think of many things that is happy to remove it for you.

  If the system is working properly, what do you think happened to the system since the last time, he did not work properly?

  You now, or have you had the "Ask Toolbar" installed on your system?

  Do you now or nave already used third-party applications on your system where the product description includes descriptive as sentences:

  cleaner, mechanic, detective, doctor, heal, optimize, clean up, tune up, speed up, set towards the top, compact, compress, faster, power, boost, boost, gum, muncher. guaranteed or all that has an icon that looks like a key, the key or the screwdriver?

  In a facility only XP partition has not even need a c:\boot.ini file starts - he's going to complain, but this threshold always begin.

  You must create a new file c:\boot.ini.  It's just a text file, so you can use any text editor such as Notepad or WordPad to create a new file.

  Here is an example of a simple c:\boot.ini file you can copy and paste the text to a new file. :

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect

  When you get this text into your text editor, do a save as, and save the file as:

  c:\Boot.ini

  Answered in the affirmative if invited to replace the existing file.

  Then restart your system.

  If the file is missing once again, we need to understand why and fix it.

• Unreadable files on E: (NTFS) when you start Windows XP.

  Original title: unreadable files on E: (NTFS).

  start windows xp... I get the prompt checking file system on E:. Segments of the file 268, 269, 270 and 271 are unreadable. (I suspect that it happened when my printer has been incorrectly disconnected the other day) I can solve this problem?

  Hello

  ·         The quick check for E: drive runs every time that you start the computer?

  ·         Is the E: drive an external?

  You can run a full disc on your machine check & check if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you start Windows Media Player I get error: "Server execution failed".

  Hello

  When I try to start Windows Media Player by double-clicking an audio or video file, I get the error "Server execution failed" for this file. Can someone tell me what this means and what I can do about it?

  Thank you

  Christi

  Hi Christi,

  You may receive this error if you try to open a file media shortly after the closing of Windows Media Player (WMP).  When you close WMP, the user interface is closed immediately, but WMP continues to be in a State of "shutting down" for a few seconds, and the process is still in activity during this period.

  To avoid this problem it should be enough to wait a few seconds before Windows Media Player opens, 2 seconds at least.

  Bobby

• How to remove white screen when you navigate from one page to another in Webworks BB?

  Hi all

  I have developed a web application for Blackberry using Blackberry webworks SDK... I created the package using emulator Ripple... In that when you navigate from one page to another page... coming white screen... How to remove this white screen... and instead of the definition of the loading screen in web application... Please me... Thank you very much in advance...

  With respect,

  Marimuthu_P

  normally it is not a white screen to navigate. You can view data-bb-effect as "bland" for the transition to the screen:

  https://github.com/BlackBerry/bbUI.js/wiki/screens

  second thing, is to use the activity indicator for loading (pending content):

  https://github.com/BlackBerry/bbUI.js/wiki/activity-indicator

• White screen when you press ESC key

  Hello friends,

  In my application after making a call or see a map of thw I want to return to the previous screen... When I press ESC key for this action, I get a blank screen, then only the previous screen... Can someone tell me how to remove this white screen...

  Kind regards

  Lachkar

  I solved this problem by putting this code

  protected void onObscured() {}

  Close();

  }