Slideshow 'next' and 'previous' buttons do not work. Muse

Similar Questions

• Next and Previous buttons do not work in a Blu - ray writer

  I use Encore 5 and have created a blu ray player. In reminder, the when I preview the disc I see that all my menu navigations work fine, all my links of chapter work very well and once I start to play a chapter, the buttons previous and following in the preview screen work very well also, navigate to the next or previous chapeter as appropriate.

  Then, I created a disk image and it burned to a BD - RE disc to test on my PS3. The disc turn and play very well on the PS3, except for the buttons next and previoud. Click on the next button, I get the message "this operation is not allowed. Click on the back button, I am stuck at the beginning of the current chapter, but he never goes to the previous chapter.

  Still, I have a unique schedule containing a minute 15 film (m2v). I create 4 chapters in the film by inserting the points of capture and tied the end of each chapter at the beginning of the next. My first takes place at the beginning of the film, and all my menu buttons are linked to the chapters.

  What should I do to make sure that the next and previous buttons work in a Blu - ray player? Is this a bug in the software?

  Thank you

  linked the end of each chapter at the beginning of the next.

  Why you do this? The typical method is not end these actions and the timeline plays through a different method is used to read the individual chapters, if you need to play alone and return to a menu. But if you want to play the next chapter, simply do nothing.

  The menu is a regular menu or a popup? I understand that the first piece is your timeline.

  For the record, I do not think that relevant here, but added CS6 bluray chapter playlist.

• keyboard popping up during the call and previous button does not work...

  Why can't I write during a call? I tried other keyboards, but the result is the same...

  is there a solution?

  You have app smart key? If so, remove or disable the calls.

• 'Next' and 'previous button '?

  Hello

  Is there a way to create a next and previous button action without having to code each button (set of State transition, while in the State)?  I know that this is possible in Flash, but I use catalyst right now because it's so convenient.

  Thank you

  Doug

  Within Flash Catalyst no there is no concept of variables in Flash Catalyst. This would be something you could add via ActionScript and using Flash Builder.

  Chris

• Satellite A660 - touch pad / stop and other buttons do not work

  Dear people on this forum,

  Recently, about 3 weeks ago, I turned on my computer and I cleaned out the dust because it was overheating.

  about 2 weeks before, I noticed that my touchpad is not working and the buttons at the top of the page do not work, there is no light (multimedia audio buttons wireless) I can't activate/deactivate or either, I don't know how. I don't know if the problem because I cleaned my laptop and has not logged a few threads back but I included this detail because I do not use these buttons if I haven't noticed if they were on. but he said: 2 days ago, I don't know how my wireless exploded Ant when I press fn + f8 (wireless) wireless communication switch is turned off, which is one of the buttons is not working (upstairs next to / switch even with my touch pad)

  I tried the following:

  Windows Update
  turn off the computer, remove all cables and battery and wait for about 30 minutes. Then then hold down the button for 30 seconds
  Reinstall the support flash cards, hw Setup utility / value pack
  and finally a Toshiba out of the recovery of the box using the recovery of 2 cd product

  I don't know what to do next. It's either:

  try something else
  or is there a wire is connected both touchpad and the buttons at the top and I have to open my laptop and connect them.

  Please answer as to my next step to get my wireless.

  Your dear member of the forums, kaujis

  Post edited by: kaujis

  Please don t get me wrong, but I don t know how to help you now. Disassembly of the laptop is to only authorized persons and if you do it on your own there is always a risk that something may be hurt or may be damaged.

  OK, I must also say that I also removed my machine too but I got lucky and everything is OK as before.
  I put t know how A660 looks inside, but the principle is still the same and I can't imagine you have whatever it is damaged.
  You know very well that we cannot say much about your problem. What you need to do now is the final test of functionality and install original recovery image that you got with your laptop. Test the functionality with the factory settings. If the problem is still there, I m afraid you must open for new laptop and check if everything is connected correctly.

  Last option is to contact the service and ask for help.

• Satellite P20: Fn + F5 and TV-button does not work

  Satellite P20, keyboard of Windows XP SP2 problem.
  When I press Fn + F5, the computer does not show that earlier the different display options. TV button does not work also. I can change the different views with my nVidia Display Driver.

  My keyboard is OK, there is no dust or liquids. I have the latest update of the BIOS and Windows XP Service Pack 2. What program controls the functions of the keyboard in this case?

  How do I fix this problem?

  Hello

  Of course, you have deleted something or preinstalled on your own operating system. Without Toshiba has designed tools and utilities, it won't work. I put t know exactly which of them are to do this, but please try to install keys Dritek easy button util. /Sticky V1.008, E - key utility and Toshiba Hotkey Utility.

  I hope this will help. If this isn't the case, please write again.

• Satellite U500-1F5: eco and FN buttons do not work after BIOS update

  Hello world

  I hope I can find a solution for my problems here.

  I bought a new Toshiba Satellite U500 (PSU9ME),
  I'm updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center.

  Last week I received an alert to updat the BIOS and I did. Since then, I've noticed the following problems:

  1 eco utility does not work, and when I tried to uninstall, it says (not supported BIOS)
  2. on screen funtion buttons that appear at the top of the screen when you press the Fn key no longer not apear
  3. the touchpad lock / unlock button does not work, and even by pressing Fn + F9 doesnot lock

  I hope you can give me an answer about my problems,
  I already downloaded the latest updates for the eco and value-added packege of the toshiba site and install,

  BUT

  does not my prob

  still eco utility does not work. The msg (not supported BIOS), appear when I run the update.

  The bar of buttons on the top of the screen does not (even after I uninstall the package of value of toshiba and re - install the last being) and the locking/unlocking back touch button does not work.

  I hope Toshiba can find me a solution, coz I don't have time to go to the DEPOT
  PSU9ME00D00XAR model U500-1F5

  Windows 7 (64)

  Thanks in advance

  Hello

  First one comment:
  * I am updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center. *
  That s is nice, but certainly not necessary. When the system is working, do not touch or change anything. Maybe stupid sounds now, but I recommend you to remove the TEMPRO system. Believe me you don't need. I have 2 years old Satellite A300 and original BIOS. It works perfectly and I don't want to take any chances and to change what anyone. Since last month, I have the Satellite U500-1EX and will do the same. TEMPRO is already removed, and I am happy with the factory settings.

  All that you have done is OK, but at least you can try to reinstall entire OS now using HDD recovery option (F8 at startup) to see if everything works well again. Sorry, but if this will not help, I think that you need the BIOS downgrade to the old version.

• Satellite U500 - 1 8 - eco and touchpad button do not work

  I had to update my Windows 7 Profesional version and now I have some problems:

  1. I installed eco utility but when I press the single button of co control nothing happends
  2 start/stop pad touch button does not work (not as important)
  3. when I press the fn button context menu? (the bar at the top of the screen with shortcut explanation)

  I looked on the toshiba site, but can not find good files someone help me?

  Thanks in advance

  Hello

  In my opinion, you must reinstall Toshiba Value added Package and the Eco utility. All utilities, you can get on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  So I agree with the user above the reinstallation of this tools, everything should work properly again.

• Qosmio G30 - 126 monitor become black and FN buttons do not work

  Hello

  I have small problem, ehm two problems, but may be small for you :)

  Last week, I install Vista ultimate WITHOUT RECOVERY CD...
  It's OK, but I close the cover of the book and instantly open, monitor become black and I can't do anything without restarting.
  In the Panel in feeding opportunities, bookmark 'options to close the cushion' does not work.

  Maybe it's by, because I'm not driver if exists

  And second problem may be linked with the first, but it is a mistake, because I was not discover drivers because I haven't hidden toolbar on the back Windows, where standartly is on-site.

  I don't work much hidden functions under the FN key (I think that FN + F2, F3...) F12) most keys be the side POWER without multimedia keys on the music...

  Thx for the help!

  SRY for my bad English

  Post edited by: Martiosso

  Hi Martin

  First of all it s interesting if you have downloaded and installed all the Toshiba Vista drivers that are published on the European driver Toshiba page?
  All drivers must be installed in the correct order!

  If I'm not mistaken the Qosmio G30 - 126 belongs to the series of PQG32E. It was delivered with HD DVD player, and therefore, you should choose the drivers for the Qosmio G30 HD DVD (PQG32E)!

  Please first check the file txt Instructions of Installation, and then install all the drivers as mentioned in this document.

  With regard to the issue of the display;
  You need to install the correct driver NVIDIA of the Toshiba page!

  The keys FN and control buttons don t work because the Vista Toshiba value added Package has not been installed. This package contains applications that are needed to get all the features of Toshiba running!

  Good luck

• HP PhotoSmart C310a market and stop button does not work.

  Disconnect the power and rear connection does not work.  Printing is sitting at the initialization and the button does not illuminate.

  Hey jacobyaz,

  If the printer does not respond when you press the power button, you can try the steps in this video here:

• Accessibility of the FN and Support Button does not work

  Hello

  If like many others, I also have problem with the support of the key. ECO button does nothing, as well as wifi and one button next to him who previously opened the toshiba bulletin board.
  I suspect that the problem is CCleaner which I put some Toshiba applications do not start at startup.

  Also if I press the FN button is not pop up the menu at the top of the screen even if I always change with her brightness level.

  Someone knows how to solve this problem WITHOUT restoring the system because I've done a few days back... :/

  Can you please tell us what laptop you have and that you always use the original pre-installed OS that you got with your laptop?

  In any case to get it works try once again this:

  Press Windows key + R > write MSCONFIG and click OK > click on the Startup tab and click enable all > OK.
  Restart your laptop and test functionality.

• Qosmio G35 - 600 - card reader and control buttons do not work

  Hello

  So I recently installed windows XP on my Toshiba Qosmio G35-600 and I found all the drivers except two. If someone out there could help me find this would be great.

  (1) the first driver, I can't find is for the control of Toshiba above my keyboard buttons (I think that's what they are called). Quosmios have 12 buttons on the top above the F keys and currently only my power button, the brightness keys, up and down and the keys sound dolby work. The key analog TV, the Media Center button, play, stop, previous, next, check-in and s-video, the buttons do nothing more. It would be cool if I had again a s-video on the ability, but above all I want is the previous play and next buttons to work.

  (2) the second problem I have is with my built in SD card reader. A few times I thought I found the right driver, but after installing the SD card was not appearing in my computer.

  A pre-emptive thank you for the help,

  Xamboni

  Hello

  On the U.S. Toshiba download page, you can find drivers Windows XP Home (link given by Luc). I think you're missing Toshiba controls for Windows XP (don't forget the common modules is installed first) and Texas Instruments PCIxx21 FlashMedia driver for the card reader.

  Is a device in the Device Manager listed as unknown?

• Image galary display based on the next and previous button

  Hello

  I'm posting that picture galary on buttons.i next & previous write this code on the type of area (pl/sql anonymous block). it I sgiving the error

  • ORA-06550: line 24, column 34: PLS-00103: encountered the symbol "?" when expecting one of the following values :), * & - + / at rem rest mod < an exhibitor > (*) and or using the | multiset.

  "in the code my < img src="images/001.jpg" class="cube"/ >< /a > line I want to replace my images.what table I should write here. In the source what do I write.

  my code is: -.

  {code}

  DECLARE

  REC INT_IMAGE_GALLARY % rowtype;

  v_id varchar2 (10);

  Start

  HTP.p (')

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  Intercruises < title > < /title >

  < link href = "" #WORKSPACE_IMAGES #skitter.styles.css "type =" text/css""

  Media = "all" rel = "stylesheet" / >

  < script src = "#WORKSPACE_IMAGES #jquery - 1.6.3.min.js" > < / script >

  < script src = "#WORKSPACE_IMAGES #jquery.easing.1.3.js" > < / script >

  < script src = "#WORKSPACE_IMAGES #jquery.skitter.min.js" > < / script >

  < script >

  {$(document) .ready (function ()}

  var options = {};

  If {(document.location.search)

  var table = document.location.search.split ('=');

  var param = array [0] replace ('?) ', '') ;             This line is in error?

  var value = array [1];

  If (param == 'animation') {}

  options. Animation = value;

  }

  ElseIf (param == "type_navigation") {}

  options [value] = true;

  If (value == 'points') $('.border_box').css

  ({'marginBottom': "40px"});

  }

  }

  $('.box_skitter_large').skitter (options);

  Highlight

  $('pre.code').highlight ({source: 1, Zebra: 1, indent: 'space',})

  list: "{ol'});

  });

  < /script >

  < / head >

  (< body > ');

  FOR REC IN (SELECT id, dbms_lob.getlength ("GALLARY_IMAGE") AS GALLARY_IMAGE FROM INT_IMAGE_GALLARY WHERE upper (IMAGE_NAME) AS superior ("Interc %')) "))

  LOOP

  HTP.p (')

  < table width = "560" border = "0" cellpadding = "0" cellspacing = "0" >

  < b >

  < td > < div class = "box_skitter box_skitter_large" >

  < ul >

  "< li >< a href="#cube">< img src="images/001.jpg" class="cube"/ >< /a > / / I must add my table pictures here how I can write code here to display pictures

  < div class = "label_text" >

  < /p > < p > cube

  < / div >

  < /li >

  < /ul >

  < / div > < table >

  < /tr >

  (< /table > ');

  end loop;

  HTP.p ("< /body >

  (< / html > ');

  end;

  {code}

  Thanks and greetings

  CORINE

  works very well on the application of google map workspace check application.

  do this regardless of the changes in the html Page header

  Go

• iPhone 7 seems to hang and the buttons do not work

  My new iPhone 7 seems to hang at any time and any of these options to re - start the job. The buttons do not respond. does anyone else have this problem?

  MY iPhone 7 has low this three times in the last 2 days. None of the buttons will respond.  The screen works fine and I can text and use the camera, but when I push the home button, while the Taptic feedback works, nothing happens.  The locking button and volume do not work either. The only thing I can do is a hard reset.

• Bookmarks are missing and "back" button does not work.

  Suddenly, the back button doesn't work after upgrade to the latest version of Firefox, does not have the 'star' of the Bookmarks button and all my favorites are missing.

  This forum software that you have posted here with Firefox 12.0, not the latest version of Firefox 21.0. Another PC than the one you post on?

  If it's the same PC, see this:
  
  https://support.Mozilla.org/en-us/KB/websites-say-Firefox-outdated-or-incompatible#w_firefox-is-showing-the-wrong-user-agent