QT application fails to start in Release mode

Similar Questions

• Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. » __

  Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »

  UM. I have no idea what that means, I never had that in my 20s I was using a computer.  Please help, someone!

  You can get the Chkdsk to run in the General Windows interface by following these instructions?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Your command prompt Mode works without failure or a boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  It works if you test with another user, you will need to create one to test with?

  System Restore and the System File Checker is able to fix anything?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Have you tested malware?  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• VSNClient.exe - the application failed to start correctly (Oxc0000022) click on ok to close the application.

  I have the - 'VSNClient.exe - the application failed to start properly (0xc0000022). Click OK to close the application ".» After having clicked on the desktop does not come and the background is also black.  I can get to the Task Manager and using safe mode. I tried several ways to get rid of him without success. It is the Vaio with Windows 7 64 bit. Can anyone help please?

  VSNClient. exe is part of a product called known as VAIOSmartNetwork.exe and it is developed by Sony Corporation.

  You will need to re - install or remove in safe mode.

• "The application failed to start because its side-by-side configuration is incorrect."

  original title: Please answer me

  Hello, I just downloaded yahoo Messenger 11. I have windows vista, and the installation went well. Now, whenever I try to start it, I have a Kaspersky Anti-virus program. As you approach the end of the installation of the program, a warning box appears, through a program of protection and on the inside, there are three options, I already tried all that, and then I get this error: the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details.  Any help is appreciated. Thank you, raed - zyd

  You might also have a look at the following thread replied:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/error-the-application-has-failed-to-start-because/df019c0d-746e-42d0-AD68-465e18e3f3ef

• Age of Empires online game gets error "the application failed to start because its side-by-side configuration is incorrect."

  I just tred of age epires onlin facility but he know "the application failed to start because its side-by-side configuration is incorrect. Please check the event log... »

  Hello
  See this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/the-application-has-failed-to-start-because-its/e4d08da9-4452-41A8-B66B-ce0b82779019

  Let us know if it helps.

• Error message: the application failed to start because its side-by-side configuration is incorrect please view log for details application event

  Original title: cannot open programs

  I get this message when I try to run any program on my windows vista operating system: the application failed to start because its side-by-side configuration is incorrect please view log events applications for more details. I can't open any programs or files associated with programs IE Miicrosoft Office), any help would be sufficient. Please make your suggestions VERY user-friendly. Thanks in advance.

  Hi KenKenJr,

  1. are you faced with questions only when you open Microsoft Office programs?

  This error can occur because of a corrupted Microsoft Visual c++ installation.

  Step 1:

  If this error occurs only when you try to open the Office programs, you can check the following link and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Step 2:

  To resolve this problem, you can also install the latest version of visual C++ according to the version of Windows installed on your computer (32-bit or 64-bit) and check:

  Download and install Microsoft visual C++ from the below mentioned link:

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  For more information, you can consult the following link:

  http://blogs.msdn.com/b/developingfordynamicsgp/archive/2010/08/20/side-by-side-configuration-is-incorrect-error-message-given-launching-Dynamics-GP.aspx

  Hope this information is useful.

• live Messenger window do not pronounce it says: the application failed to start because its side - side configuration is incorrect

  live Messenger window do not pronounce it says: the application failed to start because its side - side configuration is incorrect

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• Unable to launch the live messenger window "application failed to start because its side by side configuration is incorrect."

  Unable to launch window live messenger on Windows vista. The error message is "the application failed to start because its side by side configuration is incorrect. See application for more details event".

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• When I opened e-mails. doc or pdf, this message appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  Original title: side-by-side configuration is incorrect

  When I opened, try opening some emails. doc or pdf, this msg appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  I'm going to log events, but how to solve the problem by putting the RIGHT configuration to?

  Thanks in advance

  Hello

  1. when the question is is produced?

  2. you remember of any change to your computer before the problem?

  3. are you using a 32-bit operating system or a 64-bit?

  Please visit: What are the information in the event logs? (Event Viewer)

  In the meantime, follow these steps and check if they help.

  Step 1:

  I suggest you install the Visual C ++ 2005 Sp1 Runtime and check if the problem persists:

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647&displaylang=en

  Step 2:

  If this does not resolve the issue, I would have you done SFC scan on your machine to check if the problem is related to missing or corrupted system files.
   
  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• Cannot open applications, error: "the application failed to start because its side-by-side configuration is incorrect...". »

  Original title: cannot open applications

  I am trying to open apps, and it says "the application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. "I tried to download C++ from an existing thread already, but when I try to run it, I get the same message. I have a x 64 bit system.

  Hi Alex,

  I suggest to uninstall all versions of Microsoft Visual C++ Redistributable installed on your computer and then install the latest version.

  To uninstall refer to the articleUninstall or change a program".

  After uninstalling, download and install "Package redistributable Microsoft Visual C++-2010 (x 64)" from Microsoft Download center.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632

  Package redistributable Microsoft Visual C++ 2010 (x 64) SP1.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=13523

  Keep us updated on the status of the issue.

• Cannot open mspaint "the application failed to start correctly (0xc0000005). Click OK to close the application. "

  Hello

  I get the following...

  "The application failed to start correctly (0xc0000005). Click OK to close the application. "

  Please help me with suggestions?

  Thank you

  Dimitri

  Hello

  Thanks for posting the question on Microsoft Community Forums. According to the description, you get an error message "', the application could not start correctly (0xc0000005)." Click OK to close the application"when you try to open Microsoft paint. We will analyze and identify the cause of the problem.

  1. are you aware of changes to the computer before the show?

  2. is it limited problem specifically with Microsoft Paint?

  I suggest you perform the steps:

  Method 1:

  Put the computer to boot and search for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 3 in the article by putting your computer to normal startup.

  Method 2:

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please respond with more information about the issue so that we can help you.

• YouCam is not working error the application failed to start because its side-by-side configuration is incorrect.

  It worked initially, but now it does not work

  now every time I try to go on the youcam, a box appers and said

  "the application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. »

  I need help to solve this problem

  Hello

  You did changes to the computer before the show?

  Method 1: I suggest that you run the SFC scan and check if this solves the problem for you:

  http://support.Microsoft.com/kb/929833

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Method 2: Perform a disk check, follow the steps below:

  1. open the computer by clicking the Start button, click computer.

  2. click on the drive you want to check, and then click Properties.

  3. click on the Tools tab and then, under check for errors, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  Method 3: Update of the .net Framework.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=22

  Method 4: You can also try the steps from the link that addresses a similar issue:

  http://Forum.CyberLink.com/forum/posts/list/10017.page;JSESSIONID=90C05F693894B118A564C99DA1172301#44062

  Check the Event Viewer for related the question paper.

• Cannot run Quicken 2010, error message: the application failed to start because its side-by-side configuration is incorrect

  Original title: the application failed to start because its side-by-side configuration is incorrect

  I use Quicken 2010 for a couple of years, and suddenly it stopped working with the error in the subject line. I uninstalled the program completely,
  re-installed and got the same error. (I am running Windows 7 64 bit and help Quicken was not particularly cooperative.) So, at the suggestion of someone, I ran a SxSTrace and got the following report, which I find incomprehensible. If it points me to a solution, maybe someone could help me with it:

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x86)\Quicken\qw.exe
  AssemblyDirectory = C:\Program Files (x 86) \Quicken\
  Application configuration file =
  -----------------
  INFO: Parsing manifest file C:\Program Files (x86)\Quicken\qw.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC90.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8"
  INFO: Reference: Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8"
  INFO: Resolving reference Microsoft.VC90.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT\9.0.21022.8__1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_f480bfaef65491a5.manifest
  NEWS: Policy redirected assembly version Editor.
  INFO: The Post policy assembly identity it is Microsoft.VC90.CRT, processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.30729.6161".
  INFO: Start the detection of assembly.
  NEWS: Try to detect manifest to C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57.manifest.
  INFO: Manifest found at C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57.manifest.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC90.CRT.mui, language = "*", processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.30729.6161".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en-US_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en-US_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.MFC\9.0.21022.8__1fc8b3b9a1e18e3b\Microsoft.VC90.MFC.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.mfc_1fc8b3b9a1e18e3b_9.0.30729.1_none_7dd1e0ebd6590e0b.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Good news! After removing and reinstalling the software appropriate to Visual C++.
  Quicken is again functional and, even better, after all uninstalls and installs the last days, my connection to my Bank to download transactions is still in place.
  Thank you