No supported in the update configuration manager esxi 4.1 5.1 HP DL580 G7

Similar Questions

• Drive Thin provisioning of support in the free version of ESXi 4.1

  Hello!

  Drive thin provisioning is supported in the free version of ESXi 4.1?

  Concerning

  YES

• Automatic updates from the update configuration failure; Returns the configuration of previeous... Does anyone else have this problem? It started right after I uninstalled Norton anti-virus.

  I get the auto-mises to day ok; my machine tells me ' don't turn or turn off your computer, install the update 1 of 4' but when I can back up the next day I get the same message except that he says it configures windows updates... then after a while, said "failure to configure updates, return to the preveious configuration & rises."   That is what it is?

  Hello

  ·         You receive error messages?

  ·         This happens with all the updates?

  ·         What are the updates, those who are causing these question?

  Method 1:

  Try running this utility for troubleshooting and check if it works: Open the troubleshooting Windows Update tool http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter

  Also try to reset the windows update components: How to reset the Windows Update components? http://support.Microsoft.com/kb/971058 (also applies to Windows 7)

  Method2:

  I suggest you put the system to boot and see if the problem still occurs. Follow the steps mentioned in the article mentioned below.

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  Method3:

  Also, try to follow the steps in the article next, if the above methods do not work:

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7 http://support.Microsoft.com/kb/949358

• Cannot start the updated VC Manager after U4

  Hello

  I just upgraded to VC2.5U4 and it seems that the VC cannot connect to update Mgr dbase "[vcIntegrity",

  867] ODBC error: (IM002) - [ODBC driver manager] data source

  name is not found and no driver specified default"

  This is the vmwar-vci-log file:

  ODBC error: (IM002) - [ODBC driver manager] data source name not found and no driver by default specified

  vim.fault.DatabaseError

  VcIntegrityPlugin Start

  VcIntegrityPlugin WaitStop

  Judgment of the managed process rdevServer.exe

  Stopping the process managed vum - webServer.exe

  Judgment of the managed process java.exe

  Monitoring of the process stopped

  Product = VMware Update Manager, Version = 1.0.0 Build = 145819 (product Build = 63995)

  CryptoKey_Import: not in the export format

  CryptoKey_Import: not in the export format

  CryptoKey_Import: not in the export format

  Unable to get the module name to process 4. Ignoring the process

  Unable to get process module name 5404. Ignoring the process

  From managed process java.exe

  From managed process rdevServer.exe

  From managed process vum - webServer.exe

  No instance found Web server running

  Monitoring of the process that is started

  Internal demand created Task Manager...

  Handler created email alerts...

  Configuration manager created...

  Locking entity manager created...

  vaCrypto initializing...

  VALM loaded C:\Program Files\VMware\Infrastructure\Update Manager\ssl\valm.key key

  2009-05-16 20:51:04:171 "Activation.trace" DEBUG 6392 Trace for all: false 

  2009-05-16 20:51:04:171 "Activation.trace" DEBUG 6392 Trace of integrity. BaselineComplianceStatusCollector: true 

  2009-05-16 20:51:04:171 "Activation.trace" DEBUG 6392 Integrity.ComplianceStatusCollector track: true 

  2009-05-16 20:51:04:171 "Activation.trace" DEBUG 6392 Integrity.ComplianceStatusManager track: true 

  2009-05-16 20:51:04:171 "Activation.trace" DEBUG 6392 Trace of integrity. ContainerComplianceStatusCollector: true 

  2009-05-16 20:51:04:171 "Activation.trace" DEBUG 6392 Trace of integrity. ScheduledTaskManager: true 

  2009-05-16 20:51:04:171 "Activation.trace" DEBUG 6392 Trace of integrity. SessionManager: true 

  2009-05-16 20:51:04:171 "Activation.trace" DEBUG 6392 Trace of integrity. UpdateComplianceStatusCollector: true 

  2009-05-16 20:51:04:171 "Activation.trace" DEBUG 6392 Trace of integrity. VcIntegrity.remediate: true 

  2009-05-16 20:51:04:171 "Activation.trace" DEBUG 6392 Trace of integrity. VcIntegrity.scan: true 

  2009-05-16 20:51:04:171 "Activation.trace" DEBUG 6392 Trace of integrity. VcIntegrity.setConfig: true 

  2009-05-16 20:51:04:171 "Activation.trace" DEBUG 6392 Trace of integrity. VcIntegrity.setNewUpdateConfig: true 

  VcIntegrityPlugin Init

  Add reminder to Ufa Shutdown manager.

  ODBC error: (IM002) - [ODBC driver manager] data source name not found and no driver by default specified

  vim.fault.DatabaseError

  VcIntegrityPlugin Start

  ODBC error: (IM002) - [ODBC driver manager] data source name not found and no driver by default specified

  vim.fault.DatabaseError

  No. began

  Leave validation. Failed

  ODBC error: (IM002) - [ODBC driver manager] data source name not found and no driver by default specified

  vim.fault.DatabaseError

  No. began

  Leave validation. Failed

  ODBC error: (IM002) - [ODBC driver manager] data source name not found and no driver by default specified

  vim.fault.DatabaseError

  No. began

  Leave validation. Failed

  This is the error message I get when using virtual Center

  Is it my ODBC name that does not, where can I change that?

  Any suggestions please. \

  Thank you very much

  Here are a few kilobytes that may be useful

  http://KB.VMware.com/kb/1006169

  http://KB.VMware.com/kb/1006902

• Windows Vista downloaded update, start-up went in the update configuration but does not update, but after a minute or so stops and it's a cycle.

  Update configuration without end with 0% then stops then after configure updated again with 0% and shuts down again and it will be just a cycle... What should I do?

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  http://support.Microsoft.com/kb/949358

• Access to an external table via the display in the UCM configuration manager problem

  Hi all

  I know that this question is already asked here: to access the external tables in DB / in UCM Applet configuration manager but the conversation has already been archived, and I can't comment there. I'm following approach given by William Phelps in above said archived thread.

  I am able to create dblink with data remote and created the view by using the linked table in my diagram of the Complutense University of Madrid. The problem that I face is that this point of view such as told by William is not visible in the configuration manager. Although I tried to give (create view and create all views) system diagram University Complutense of MADRID user privileges, but I'm not sure that it will also provide access rights. I am using the SQL Developer and working at the University Complutense of MADRID 11 g.

  All comment or suggestion will be a great help.

  Stéphane yapi

  The value of this configuration variable: EBRIncludeViewsInTableList = 1

  https://jonathanhult.com/blog/2013/11/use-database-view-WebCenter-content-schema-view/

  Jonathan

  http://jonathanhult.com

• New Viewer Android - no support of the update?

  Hello (Neil?).

  I just read the notes for v29.3 and I need to explain below:

  • Folio updates not yet available
    

  Does that mean exactly? When I post the update in the folio, it is not not possible to download this update?

  • No display of pages web - app

  This, I don't quite understand.

  Thanks for the explanation.

  Update should be available to the large version v30 DPS party. It will not in the version that we push Monday.

  Display of pages web - app is not quite what Bob says. This means that we do not support the option for the hyperlink that forces the content to be opened in the application in a web view pop - up. We always open the hyperlink in the external browser.

  Neil

• my hp support and the hp Setup Manager Wizard stopped working. ? cause to do system restore? Risk?

  Pavilion model p7 - 1047c, running windows 7, service PAC 1, Home Premium 64-bit edition, intel, explore 9, Norton.

  HP and HP setup assistance manager stopped working. This is why I can't run the automated diagnostics and controls systems. I had to use system restore today after that failure to start windows with early warning could damage the computer, the error message 0 x 80070002.  Last modified has been updated critical of windows November 16 - huge file.   I'm in place once again, but support and installation still does not.  What can I do now? I dared allow another attempot to windows update? I had a similar failure about 1 month ago.

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the computer.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• I get "Download error" Please retry to try again or contact Support in the adobe application manager

  I'm sure I can't be the only person with this problem, but recently (in the course of the last 2 weeks) my creative application of cloud manager decided to stop working, does not display any of my installed applications and said 'Download error please retry to try again or Contact Support' whenever I try to open it.

  I tried the following to solve this problem, but none of the suggestions work.

  -Reinstall the application

  -Uninstall and reinstall

  -Deletion of the file update including adobe advised and install again.

  -Updated to the latest version.

  Please help that nothing seems to work my computer runs all the rest very well.

  On Mac, it's \User\\Library\Application Support\Adobe\

• Newbe question about the network configuration of ESXi 3.5

  I have ESXi 3.5 works well on a Dell Poweredge T300 server.  I want to connect a Netgear ReadyNas Pro Business Edition for this Dell and connect by iscsi.

  I want to connect 1 network card of the ReadyNas for 1 network card on the Dell printer.

  My question is on the Dell when I go to the ESXi server and customize by pressing F2 and goto network settings I see the following:

  X vmnic0 embeeded nic1

  NIC2 integrated vmnic1 used by vswitch1

  I'm may be thick but can you explain what NIC on the ESXi server is used for access interenet and I need to configure for iscsi?  I thought that it should be obvious, but it is vmnic0 or vmnic1?

  Your ESXi host has two vswitchs configured what uplinks to physical NIC in the system.

  vSwitch0 what uplinks to vmnic0 (who, although a red x, indicating a problem seems to be very well) this vswitch holds you management interface (IP 192.168.2.107) and a portgroup of VM for your virtual machines. You also have an another vswitch vswitch1 what uplinks to GB NIC vmnic1. This vswitch has unused virtual machine port group. Also a VLAN ID has been set for this vswitch which would lead me to believe that VST is / was operating on that host in the past.

  Haven't you set up this? If this isn't the case, I would get with one who did.

  Order "the great vSwitch debate" parts 1 and 2 to start.

  http://kensvirtualreality.WordPress.com/2009/03/29/the-great-vswitch-debate-part-1/

• BIOS error 104: network card not supported after the update of the bios, HP G60

  Recently, my hard drive has begun to fail. I bought a new drive, installed a Windows 7 ISO on a flash drive, installed etc. I have a HP G60-237NR. I have reinstall everything, and then I went to the page of the drivers for my laptop. I started to install stuff, at that time there I was bored so I'd sort of from the bottom to the top if this order of the questions, I can give more details on that if I need to. I downloaded the BIOS update, because I thought that "good, he he listed for my computer, I have no doubt it needs to be updated since my laptop like 6 years. Flashed the BIOS, my computer shut down and restart didn't like I thought he was supposed to. I turned on and well 'device 104 - unsupported of detected wireless network. System stopped. Remove device and restart. "I tried to find out what to do, which told me to remove the network adapter, the bios downgrade, plug it back and you're good. Well, I unplugged my network card and the snap-snap-in two sons who attaches and restarted, he did all the stuff. I got the same error. EDIT: I meant I plugged my network back in, but still got the error. Where I had the clichés about evil, I passed the clichés and double checked the connections maps, but still nothing. Everything I found said that should have worked, I'm on the same version of the BIOS, I started with that, but it does not recognize my network card. What am I doing here? Please help, thanks.

  Hello
  
  When you have the outside wireless card, you have the error?
  
  If this isn't the case, then you can get necessary to replace the wireless adapter. I would not be able to explain how, but something may have cause to fail.
  
  You can find maps of replacement of support on page 16 Chapter 4 of the Guide Service and Maintenance for your laptop.
  
  I hope this helps.

• Cannot go beyond the updates configuration: 1 3-0% complete state. don't put off the computer.

  When I turn the lap top, the display shows that the computer is in the process of configuring updates.  Display shows "Configuration updated: step 1 of 3-0% complete.".  Do not turn off your computer. "I left the computer for hours and he stuck in this mode.  The circular clear ball appears on the screen, but it does not turn. Windows Vista Home Premium is at the bottom of the screen.  I have turn the power off.  I can't go to the start menu.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• where can I download windows xp sp 2 (32-bit) now that the support of the update is over.

  I recently had to do a refresh on my computer install portable xp. I can't access Windows update now that support has taken late for sp1 and 2. I need to load to load sp2 then sp3. I have another xp with sp3 machine and can access updates it. Y did he somehow and a site that I can download the sp2 on a disk and then install on the laptop. I don't see it on Microsofts site.

  Thanks in advance,

  Mike

  Hello

  You can download SP2 for XP here (the good language):

  http://www.Microsoft.com/download/en/details.aspx?ID=28

  and here you can download the SP3 for XP (the good language):

  http://www.Microsoft.com/download/en/details.aspx?ID=24

  and how can you see the "system requirements" - you can directly install SP3, it means, that it is not necessary to install SP2 before SP3.

  Windows XP Service Pack 3 (SP3) includes all updates previously released for the operating system

  LC

• I want to download the update of VMware ESxi 5.5 3B

  But when I sign up for the trial, it puts me update 2 :-(

  What you've recorded for earlier? This happens when you download the other than approved for products product/updates.

  Same error for me, but I downloaded the recording with the new code. I think that you will need to register with the new code.

  VMware KB: How to download VMware products and troubleshooting issues with downloads

  VMware KB: VMware ESXi 5.5, Patch ESXi550-Update03: ESXi 5.5 full update 3

• Oracle Configuration Manager server is not available (500)

  I have a few goals as the configuration of the report for My Oracle Support, using the Oracle Configuration Manager.  Everything was fine until last week when I noticed that the last Date of collection was not changing.  When I try to manually collect, I get the following error:

  E:\ > ora11\product\11.2.0\dbhome_1\ccr\bin\emccr collect

  Oracle Configuration Manager - output: 10.3.8.1.1 - Production

  Copyright (c) 2005, 2013, Oracle and/or its affiliates.  All rights reserved.

  ------------------------------------------------------------------

  Unable to determine if mandatory packages available.

  Error occurred during the update of recovery. Oracle Configuration Manager server is u

  navailable (500).

  Collection and download failed.

  E:\ >

  Anyone else facing this problem?  If so, no idea how fix this problem?

  It turns out that this is planned, as Oracle launches a database upgrade.  This notice was posted on MOS:

  Configuration in read-only Mode data

  We are making improvements to the database that contains the configuration data for My Oracle Support. During this upgrade, the client Configuration Repository (CCR) is currently in read-only mode. You can view the configuration data, but will not be able to download new configurations or change the attributes related to the configuration of the systems. The CCR will be in read-only mode until the termination of the stoppage of My Oracle Support planned this weekend.

  While CCR is in read-only mode, you will see an error message:

  • In the corresponding log file during an attempt automatic download a new configuration or for offline Collector users who download their configuration as an attachment the Service request.
  • On My Oracle Support pages that access configuration data
    • Mainly under the systems tab
    • Sometimes in the Patch and sanitation recommendations

  When the CCR returns to the update mode after the failure, your last successful download will remain in place as the benchmark to determine the differences with the current configuration. The next collection that you send will update your configuration and would then become the configuration used for comparisons.

  Please apply for a non-technical Service or to contact the Oracle Support if you need help or have additional questions.