Qt Creator and BB10 NDK, QT-QDE - resolved project

Similar Questions

• Qosmio G30 - video input using WinDVD Creator and WinDVR 5 problems

  Hi all
  My G30 (PQL32L) supplied with Windows MCE. It has preinstalled WinDVD Creator 2 and personally I install WinDVR 5 (application of part 3 came with my Plextor ConvertX PX-TV402U PVR).

  Problems:
  1 WinDVD Creator 2: failed to set the TV system. I plugged my video source via the video cable (yellow, white, red) provided and connected to the AV-in port. I chose TV on the HARD drive for the new project. Default WinDVD defined as NTSC but my TV system is PAL. Therefore, input video quality is blurry and cut in two. Once I changed the setting in the software of PAL, the video screen turned black and no response. I have no problem with Qosmio Player with the same configuration of the connection.

  2 5 WinDVR: Application can not start correctly (hang and cannot complete the program) I to my Plextor ConvertX PX-TV402U PVR TV source, then connect it via USB2.0 for G30. My ConvertX works in my office, but failed with the G30. The application cannot start properly and hung. No response yet I'm trying to complete the program, but the screen was always there. When I try to stop my G30 then Windows MCE hung at the "Closing Windows" screen. I have to stop by pressing the button. ConvertX being operation USB cable, it is not achievable in Qosmio.

  Can someone help to solve these or give advice?

  Fine thanks
  Samuel

  Hello

  I copied the film on my camcorder for Qosmio G30 (WXP MCE) without any problem and subsequently created the DVD using Ulead moviefactory program. I also tested it with VHS-recorder. Once again without any problem!

  My camcorder was connected with firewire cable and it has been recognized correctly. VHS-recorder was connected with the aerial cable simply. I was able to record sources using Qosmioplayer (it was just to test because I'm interested, how it works). Movie from VHS-recorder was also possible to record using Media Center Edition.

  I know I also tested it with pre-installed Win DVD Creator but camcorder has not been recognized as usual. If I remember well I put the TV source and that the camcorder is recognized correctly. To be honest I don't like this Win DVD Creator and I have not tested properly.

  So I would like to know what your video source and what you hear in AV-in port.
  Please tell me exactly what cable you use for audio/video data transfer and exact port on your Qosmio laptop?

• Satellite A200-1AE: Toshiba Disc Creator and DVD MovieFactory missing after update

  I've updated Toshiba Satellite A200-1AE from Vista Home to Vista Enterprise, but now I can't find TOSHIBA Disc Creator and DVD MovieFactory for TOSHIBA software.

  No idea how to get this software?

  Thanks, Bojan

  It seems that your Vista upgrade crashed the previous settings and therefore applications such as TOSHIBA Disc Creator and DVD Movie Factory has disappeared

  You search anywhere?

• 2.0 NDK + BB10 NDK?

  After you have installed the NDK BB10 NDK current 2.0 cannot launch & more to run applications. The two NDKs can coexist on the same computer? TX.

  It works for me now, after that I followed the instructions published by user Offo in another thread. Thank you.

  Update: just to be clear: I uninstalled the NDK 2.0 that I have chosen the Cascades.

• BB7 and BB10 free in one product

  We want to combine BB7 and BB10 versions in a single product. Anyone has any experience how emissions are managed?

  Suppose we have a 1.0 release with BB7 files both BB10 and then add another version with only the files BB10, that works and BB7 users always do use the 1.0 version?

  Or do we always have to add files BB7 both BB10 to a new version.

  Yes, BB7 users will receive the 1.0 version, you don't need to always add the BB7 files.

  BBWorld serves as the versions on the possible combinations of OS and device.

  BTW, I'm a fan of long-standing applications Bellshare, you're amazing

• What is no-WINS node? Does this mean he does not broadcast server service and the WINS service to resolve a name to intellectual property?

  What is no-WINS node? Does this mean he does not broadcast server service and the WINS service to resolve a name to intellectual property?

  Hi Adam,.

  essentially servers (nodes) Wins, run a program that turns the words we type in on Internet:

  (ESPN.com) in the actual physical address of ESPN.com servers.

  So no Wins use only the real 119.97.555.34 (not a real address) instead of ESPN.com words

  B Eddie

• What is error 201 and how this could be resolved?

  What is error 201 and how this could be resolved?

  Error 201 & 205 & 206 & 207 or several U43 errors

  -https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html

• I just got my DVD for Lightroom 6 and it will not install and ReadMe directions do not resolve the issue or is not available.  There is no .exe file I can find on the disk.  What should I do?

  I just got my DVD for Lightroom 6 and it will not install and ReadMe directions do not resolve the issue or is not available.  There is no .exe file I can find on the disk.  What should I do?

  Try it please link below:

  Download Photoshop Lightroom

  I hope this helps.

  Greetings

  Megha Rawat

• I'm in photoshop and I'm trying to adjust the pressure of my pen. However, I get this sign of error with the sign of exclamation on the side and the pressure is not resolved.

  I'm in photoshop and I'm trying to adjust the pressure of my pen. However, I get this sign of error with the sign of exclamation on the side and the pressure is not resolved.

  
  

  I'm running on Windows 8, I'm using the latest version of Photoshop (2015) and I have a Wacom Intuos tablet. What should I do?
  

  Thanks, I forgot actually download wacom itself. It works now. Thank you!

• I feel like LV is laughing at me while I'm trying to resolve project conflicts...

  I tried to look in other messages on issues while trying to resolve the conflicts, but I don't think that the cause of my problem is the same...

  Here's the story-

  I am reorganizing my project files on the disk and then rebuild and straighten the conflicts of this movement vi and other files on the disc project will (I've done it before without any problems... at least I am sure that I am preeettty)

  in any case, after moving some files around LV is the vi that have been moved, but not all of them - so I right click on one of the vi by the proj that it can't find and select "resolve conflicts" to use the dialog box...

  dialog box appears and I am totally ready to start to resolve some conflicts...

  It lists each vi by name and shows the old path (where it does not find the vi) and the path where he is currently in charge of...  I select the path it is currently responsible to and click on "use the selected item.  The conflict disappears... and I feel like a real fixer conflict... until the same conflict appears immediately to the top where it was less than a second later...  I can sit here and keep clicking Next, but it keeps popping up immediately...

  the hell I'm doing wrong?

  Thanks for any info

  -pat

  Rather than move the files using the operating system and then 'find' files, use the display of files in the Project Explorer, right-click on the files to move, and then select "move the disk.

  This will move the file and update the project at the same time.

• Options for the task list in the project (and a few other considerations on projects)

  I often look at many different projects and what I like in a first step is to get a complete view of the tasks: who are and what left to do.

  So, I choose the option "Active > all THE" ("assets > all"in French). But the problem is that this option is not saved in my profile: when I leave the project for another, is not the option.

  So it would be nice if either for my entire profile I could choose which option I prefer default is (and much better) If for every project, I could choose which option I prefer.

  Finally, the option would be to be able, as an administrator, to choose what option readers/members will be seen at the first reading, then they would be able to change it if they want.

  And of course, just for fun and like everyone here, objectives, secondary objectives, tasks and subtasks, projects, subprojects would be so nice to receive!
  And, finally, why not, let's dream... power move/copy a goal from one project to another :-)

  Thank you for your comments. We will certainly these requests to the product for the purpose of review team.

  Best,

  The Socialcast Team Services customer

• Deployed Adobe CC 2014 32 bits to our neighborhood. Students launch Adobe Flash Professional and are able to start a project using ActionScript 2.0. But as soon as they click on save and try to save their project... boom... an error occurs "met with an in

  Deployed Adobe CC 2014 32 bits to our neighborhood. Students launch Adobe Flash Professional and are able to start a project using ActionScript 2.0. But as soon as they click on save and try to save their project... boom... an error occurs "met with an invalid argument' it happens to any student and any computer. Help, please!

  They can only use the old Adobe CS5 flash professional because it does not crash.

  Thank you

  Raul

  [email protected]

  CC for flash doesn't support AS2, so perhaps that is the reason.  CS6 (or earlier version) supports AS2.

• All of a sudden, the .mts files and some mp4s will not load project on one computer (still works great on the second computer)

  Worked on a project all week, no problem.  Had to restart the computer, project manager, now all files .mts say 'type of compression not supported', and some fine previously mp4s (made in After Effects) to display only green.  But it's not all mp4s, only some of them.  Through all the forums.  Do you have all the deactivation, reactivation, uninstalling, re-installing, etc..  The same problem.  Responsible for the project even upward on a laptop and it works fine.

  Nothing new has been installed.  Nothing has changed on the computer.  I rebooted, it so I could move to another office.  It worked very well at 09:55 this morning, and when I tried to reload the project after the restart at 10:20, it no longer works.

  Fortunately, my laptop slow can at least load and export the final of this project.  But I need my rear main system.

  Thanks in advance.

  Installs all the files in a NEW folder (not only renamed the current folder), can of the moment, and now they all work again!

• Encoding and still resolution for BR vs project settings

  I'm a Canon HV20 HDV film editing.  When I configure my Pr Pro project I used the recommended

  by default HDV project settings.  I hope that these are correct.  I will burn a Blu - Ray disc for the project.

  I guess that like other products I've used, the best answer here is the native resolution of your source that is I hope that what I mean.

  Now, when I make via media encode, it asks me the "frame size" / resolution for Blu - Ray disc output.

  Also when you open a new project in Encore, he requested similar information.  I'm in NTSC land.

  I am familiar with the standard HD and the resolutions and the final outcome of this project is a Blu - Ray disc played on the HDTV.

  However, what is the best media settings encode resolutoin and still "image size" for a Blu - Ray with an HDV source disc?

  I've seen several articles and videos from Adobe on these parameters, and they explain what they are, but not what are the recommended selections.

  Once you work on a project in PP can as an observation, you change the settings/resolution of the project?

  Thank you
  BJBBJB1

  PS... Didn't know which forum to post this in as it spans all 3 products!

  Your source is 1440 x 1080 MPEG2. Your final destination is H.264 - BR with 1920 x 1080 (i.e. with square pixels), because the h.264 compression is more efficient than the MPEG2, so you can either get better at the same rates or the same quality with maturities with H.264. Audio is of course a 5.1 AC3 file.

  I would skip the intermediate step suggesting Ann and export directly to your final destination with the MRQ. If you do this PR, guests of MPE accelerated for scale and effects/transitions, that you can use and you will have the smallest possible loss of quality.

  Please keep in mind that still is still a 32-bit application, so that can make the extra difference between PR and FR for transcoding. By encoding in PR jump you a transcoding step IN.

  In my case with elements PAL, I would use these export settings:

  

• Cut and paste the tables of a project to another

  When cut and paste existing tables from one project to another, the weight of the line for the cell borders appear to vary randomly - some are the original line weight and some are heavier when pasted.
  
  I tried to unravel with the properties of the table, but without result dialog.
  
  Is there a quick fix or I'm better import in all subjects, then changing any theme?

  Hi Colum/Peter,

  It is not a custom table, I just need to copy a table from one project to the other.

  Blasted my developers (may the fleas of a thousand camels, etc), recently decided to change toolbars in one of our applications. As this toolbar appears in slightly different forms in about 6 tabs, I tried to update the table that shows which icon does what and cut and paste this table in all subprojects that I. Each table then needs only a minor modification for some this subproject-specific icons.

  Peter on the right track. When I cut and glued to the table, it is also stuck in a number of lines of HTML associated with styles in the other project. If I delete these lines, the table will appear as it should.

  Thanks for the quick reply