Qosmio G30 - video input using WinDVD Creator and WinDVR 5 problems

Similar Questions

• Qosmio G10 - capture using WinDVD Creator

  I'm unable to capture video using the s-video input and WinDVD Creator - I have connected my camcorder to the s-video port, but WinDVD Creator recognizes that nothing is played. Several users have advised by clicking on the icon key after running WinDVD Creator, but I tried to open it several times, by selecting a new project, and I do not see the icon key to little matter what I do.
  I had the software on my computer for awhile. Did I miss something in the initial configuration? Should I reinstall?

  Any help would be much appreciate.

  See you soon
  Raymond

  Hello

  Please check the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  You will find all the stuff you need for your model of laptop. It has also rated Registry fix for WinDVD Creator. You'll find it under registry Patch.

  Check it!

• Is it possible to watch video remotely using an ipad and the Camcorder HDR-CX330 wireless?

  Is it possible to watch video remotely using an ipad and the Camcorder HDR-CX330 wireless? I could see the pictures, but really want to see videos?  I use the PlayMemories application for remote control. Any suggestions?

  Hi bill54107,

  Welcome to the community of Sony!

  Unfortunately, you can not view videos recorded wireless using your mobile device. You can transfer videos on your iPad, but only if they are saved in the format. Mp4 format AVCHD files can be transferred wireless to a tablet or a smartphone. Enable the video double setting Rec to shoot AVCHD and Mp4 format at the same time.

  You can only use the transfer of photos and AVCHD videos wireless when you download Wireless Auto Import (for Mac) and the House of PlayMemories.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• I use Photoshop CC and I have problems to use the scanning feature PLC culture and the strraigten.  Other printing features work within the progrram, but no connection when I use don't automate.

  Am I missing a configuration of PLC to allow me to crop and scan several photos?

  With the help of 8.1 with canon MX340 wireless and final version of Photoshop CC.

  Help.

  [email protected]

  VIC

  I plugged a usb cable and I was able to use the WIA import feature and

  the menu of the controller,

  He gave me the opportunity to select the printer and scan using the automaton

  function.

  When I removed the cable, it would not recognize the printer scanner in the

  Wireless mode.

  I tried to restart the system, no luck.

  In fact, when the cable is removed, the function to automate is

  "grayed out" which would explain why it cannot find the scanner.

  Any ideas?

  VIC Ouellette

  K1CGI... QRZ?

  In a message dated 12/09/2015 11:41:18 eastern standard time,

  [email protected] wrote:

  You talked

  by [email protected]

  (https://forums.adobe.com/people/[email protected]?et=notification.mention//forums.adobe.com/people/ [email protected]? and = notification.mention) in Re: I use Photoshop CC and I

  problems to use the scanning feature strraigten and the cultures of the automaton. Another impression

  features work within the progrram, but no connection when I use don't automate.

  in Adobe Community - view [email protected]of reference for you

  (https://forums.adobe.com/message/8274458?et=notification.mention#8274458)

• Qosmio G30: Can I use component video software plug-in to connect the Gamecube or PS2?

  The Qosmio G30 has a VIDEO-IN bit for the red/white/yellow wires... So I wondered if this meant that I could connect my PS2/Gamecube/similar to television, playing games on my laptop, save me money when I move to College :)

  Indeed, if I pretend that I'll put up a set - top box for the TELEVISION, the Gamecube appears under "Video Composite", I just can't save like a channel or anything at this point...

  Someone help? Would be very grateful...
  Thankee.

  Hello
  The s-video-in port can be used to connect and to import data from the external device such as an analog video camera or VCR. Imported video can be edited or written on a DVD disc.
  Video port can be used to connect the external device such as a game console

  I think you should also consult the user manual because you will find the full description on unique ports and use.

• Can Qosmio G30-102 - I use it as a HD for my PS3 screen?

  Hello

  I have a Qosmio G30-102 and I wanted to know it would be possible to connect my Playstation 3 via * HDMI *? For the moment I can use only cables AV that's really fustrating. If I can use the laptop as screen for my PS3, using the HDMI cable inform me please how to do that because I tried all methods I can think.

  Thank you

  MB

  Hello!

  Sorry, buddy, but this is not possible.
  You can use t as the screen of the laptop as a monitor. The laptop doesn't have a video input port, there is only for video output ports. This is the reason for this.

  So if you want a HD screen for your PS3, you will have to buy a monitor only. The laptop can be used for this.

  Good bye

• Qosmio G30 (PQG32L) - can use only 3.25 GB of memory on Windows 7 64 bit

  My Qosmio G30 (PQG32L) found 4 GB of memory, but only 3.25 GB of memory can be used. I'm updating to Windows 7 64-bit, but it does not help.
  BIOS reports 4 GB of RAM.

  Windows 7 64-bit operating system

  Anyone can activate the Qosmio G30 usable memory to 4 GB?

  What Intel Chipset is in the G30? (Launch CPU - Z to find out. Google is your friend)

  Some Intel chipsets are limited to 3 GB.

• Qosmio G30 - white lines on the screen and BSOD

  1. I have a Qosmio G30
  2 operating system Windows XP MCE
  and I have problem "white lines on the screen ' when windows start to load after that I got the"blue screen of death"and restart the computer.
  I try to get back, but unfortunately came with the laptop recovery CD doesn't seem to work...

  Whenever I finished to recover I have "windows loading files" and once this is done, it shows me the so-called "blue screen of death"...

  Hello

  I m afraid. I have bad news for you ;(
  I think you ve you have a problem with the hardware in my eyes, there might be something wrong with the GPU chip.
  The white lines on the screen could be related to a faulty graphics card and get the BSOD error due to a hardware malfunction or software serious questions

  I m sure that the recovery CD does not contain software problems and therefore only the fault of hardware could be the reason for the lines on the screen and the BSOD.

  In my opinion, you should contact the ASP in your country for assistance if all goes well you guarantee is valid.

  Good luck

• Can Qosmio G30-126 - I use the frequency refresh screen, more than 60?

  Hello
  My laptop Qosmio G30-126

  Problem:
  My screen refresh rate is 60. There is an option only "60". How can I show more than 70-75-85.
  Type as generic pnp monitor monitor show

  Thank you

  Hello

  Please check this Toshiba document where you can find an answer to your question:
  http://APS2.toshiba-tro.de/KB0/FAQ35007A001OR01.htm

  Welcome them

• Qosmio G30 - 175 display starts to blink and walk and becomes unusable

  After a while my Qosmio display starts to Flash and works and becomes unusable.

  A friend suggested that it was overheating.

  So I've equipped with feet to the rear to raise him up to an inch.

  It seemed to work for a while, but now it is restarted.

  Has anyone encountered this problem?

  I wonder if I can increase the speed of the fan in some way...

  David H

  The idea with the breeding of the portable back was pretty good, but have you checked vents for eventual dust? If you find that some of them, use the jet of compressed air to clean.

  Also, I recommend a reinstall of your chipset and display drivers.
  I think there are tools around the internet to control the fan speed, NHC is one of them, but they are only 3 third party programs, you can use them at your own risk.

• Qosmio G30-163 - cannot use access keys

  Hello everyone.

  I was having the problem with my shortcut keys.
  So I can't do the used.

  Where can I download this software?
  Someone help me please?

  Best regards

  If you're looking for the software (driver), which controls the keys Fn on Vista OS, then I recommend the European driver of Toshiba page;

  The site driver Toshiba can be found here.

  http://EU.computers.Toshiba-Europe.com *-> support & downloads-> support-> Drivers Download home page *.

  There you should take a look at the Toshiba value added package that contains the different utilities.
  The TOSHIBA components common driver must be installed first. Then install the software TOSHIBA Flash Cards that provides Hotkey function and function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.

  Best regards

• Qosmio G30-161: Question about D port and HD signal

  Hello
  If someone knows if I was to connect the cable I got with the computer laptop qosmio, which is D connector to SCART. If I had to get a Scart to component and connect the two euroconnectors and an adapter it'll work.
  I'd get the signal high definition

  Hello

  Please also check this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12993

• Video-conference using SX 20 and telepresence ISDn device link

  Hello

  I have a cisco SX 20 and device connection isdn telepresence device. the procedure via below I have configured and coupled unit SX and telepresence

  Step: 1

  address configured static Ip add via remote control.

  Step: 2

  using static ip, I have connection to the SX 20 device, using the browser. (ip 10.1.1.2)

  Step: 3

  Configuration--> devices--> manage ISDN link--> click--> click combined with research

  Step 4

  In ISDN configuration of the link--> I have ISDN numbers entered the repertoire. Subsequently, it works fine.

  Problem:

  End of test, cancel us the twinning of the device and restart the SX 20. Subsequently, we are unable to pair the device of telepresence.

  While click Display message (No. DEVICES DETECTED) the search button.

  Please share the solution on an urgent basis.

  Thanks in advance.

  Rgds

  Vetri

  Did restart the ISDN link solves your problem?

• 100% Windows 8 using the drive and Windows Update problem

  I'm going to completely horrible with windows 8.  I use the computer for two reasons

  1.) to run a machine virtual linux which performs calculations for my work

  (2.) to run a very small application that connects to another computer and updates a display based on what is sent to it.  This application also shuts down the computer when the network computer told him to.

  The computer is not connected to the internet, so I chose not to do the windows updates (in Control Panel, never check, do not update, etc...), now that I have a set of drivers that work well.  Took me to update to the latest version of windows 8 (not 8.1), so that the service representative would talk to me, and the problem is more serious.

  I also disabled windows update service.

  Also, after startup, svchost.exe takes 100% of the use of the disc for anywhere from 1 minute to 3 hours.  It is usually about 5 minutes, but takes more time after an update.  I reinstalled windows many times, and the problem persists.  When no other applications running, 10 minutes after the start, opening of windows Explorer takes about a minute.  This computer has a disk decently fast (I tried to replace), a processor quad core and 16 GB of RAM.  When running normally, it is extremely fast.

  My problem is that when I'm at work, a team of 20 or so programmers and engineers may have to wait up to 3 hours for the use of the disc down before you start to work because Windows 8 is unable to work properly.  How can I get rid of this?

  I am considering really just to start the linux and rewrite of the application image bit will run in windows, but I don't want the headache of Active Directory on linux.

  http://social.technet.Microsoft.com/search/en-us?query=Windows%208%20%26%20linux%20virtual%20machine&AC=5

  Try this link for windows 8 & virtual machine. Also, if it's a pc intel based,.

  go to intel.com/support/software/drivers,locate the update utility intel that

  will scan the pc for auto drivers/software.

  Even with the new CD of the OS, you must always configure the hardware on the pc for

  the operating system, most of the cds do not understand that. No windows OS takes also, that

  long to make it ready for the tasks, no more than 10 minutes without

  Progress, stop the execution of its tasks, its in an "open loop"...

• UTL_HTTP used with trigger and trigger creation problem

  Hello
  
  I'm calling a servlet when the trigger is pulled on.
  
  We use the Oracle 10 g in our database.
  
  When I tried with this syntax:
  
  CREATE TRIGGER Lad
  AFTER INSERT ON dept
  BEGIN
  
  UTL_HTTP. REQUEST (' http://localhost:7001/Test/servlet/Hai'))
  END Lad;
  
  I had created a servlet and placed in my server.
  
  As a first step
  
  When I created this trigger in Oracle she displayed as
  WARNING: Trigger created with compilation errors.
  
  and when I inserted some examples of values in the dept table in the database.
  
  ORA-04098: trigger "SCOTT. LAD' is not valid and does not re-validation
  
  Help, please.

  Toon is correct. You can find a demo showing use at:
  www.morganslibrary.org/library.html under UTL_HTTP.